Spartan Armor Systems Active Shooter Kit With Level III+ AR550  Spartan Armor Systems AR550 Body Armor with Hydra Plate Carrier. This active shooter kit set up is designed to allow a quick response time and comfortable performance fit with superior Level III+ Rifle Rated Protection. Carrier includes emergency drag handle, quick cinch adjustments for the front and hook and loop adjustments on the shoulders. The Spartan Armor Active Shooter Kit is perfect for rapid response situations.  Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.  Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.   The Hydra Plate Carrier is a highly adaptable carrier ideal for quick deployment and emergency situations such as active shooter scenarios. Easily adjustable buckles ensure a snug and comfortable fit on the sides. Ample length shoulder straps allow the Hydra plate carrier to be easily adjusted to fit a wide variety of body types. Breathable mesh is used at chest, back and shoulder contact points to allow for maximum breathability. The Hydra plate carrier is a great choice for anyone looking for a lightweight and versatile body armor configuration. Front map pocket Emergency drag handle Removable padded mesh shoulder pads with hook and loop guides Adjustable shoulder straps Hook and loop webbing Heavyweight webbing for modular attachments Padded mesh interior lining Quick adjust cinches Quick release buckles Easy access plate pockets Waist Size: 30″ – 46″ adjustable sizing Accepts traditional Medium or Large SAPI plates up to 10.25″ x 13.25″. Best fit for our shooters cut and swimmers cut AR500 and AR550 body armor. This package includes our Level III+AR550 10x12 Armor. 1/4" thickness and provides the operator with Level III+ protection IAW NIJ0101.06 standards.      Our Level III+ AR550 Armor has been tested to go beyond the Level III testing protocol (6 shots .308/M80 Ball, 2780 fps).  Special Threat Ratings: SS109/M855 3505 fps 6 shots 30-06 up to 2,719 fps     With all of our AR550 Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR550! All purchases of our Spartan Armor products have current lab certificates and secondary ballistics available on request. Remember, not all body armor is created equal!  Coating Options:  Choose the Full Coat option to have the plate lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities. To learn more check out our blog on the coating options: https://www.spartanarmorsystems.com/blog/encapsaloc-fragmentation-mitigation-antispall-body-armor-coating/   Chest Plate Weight (per plate): 10x12 AR500 Omega Armor Shooters Cut: Base Coat 8lbs 7oz. Full Coat 9lbs 3oz.      Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.         *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

Spartan Armor Systems has teamed up with Contact Armor to offer our customers an extreme concealable package that you can wear to the gym, the grocery store, wherever you feel it is deemed necessary.  *THIS PACKAGE IS SOLD AS IS, NO RETURNS OR EXCHANGES* Introducing Spartan Armor Systems™ Flex Fused Core™ IIIA Soft Body Armor Due to popular demand, we have developed our own version of pistol rated level IIIA soft body armor. The Spartan Armor Systems™ Flex Fused Core™ Soft Armor is comfortable and easy to wear. Keeping with Spartan Armor tradition, it offers GREAT protection at a GREAT price. Composed of only the best American made materials and proudly assembled in our new state of the art facility in Tucson, Arizona. Tested and passed in accordance with NIJ-STD-0101.06 / MIL-STD-662F. Rated to stop .44 MAG SJHP, as well as Special Threat Rated to stop.357 SIG FMJ  This soft armor can be used stand alone, giving level IIIA protection or ICW (in conjunction with) as backer on any of hard armor systems. All parts of this product are proudly American made. .35" profile 10"x12" Panel: Weight 1.14 lb This package comes with: Level IIIA Flexed Fused Core Soft Armor:10x12 Front and Back Panel5x7 Side Panels Contact Armor Hybrid Cool Carrier:Hybrid Cool Carrier (your size of choice M, L, or XL) If you have any questions about sizing and or the IIIA Soft Armor please feel free to reach out to us at: contact@spartanarmorsystems.com (520)396-3335