NIJ Certified

Proudly Made in the U.S.A: Guarantees adherence to the highest manufacturing standards, reinforcing the commitment to quality. Lifetime Warranty: Offers peace of mind and assurance of a product that stands by its quality and durability.  Level IV 4S17 Hard Armor Plates: With NIJ Level IV certification, DEA compliance, and 100% Berry Compliant, these plates offer unparalleled ballistic protection, providing the highest level of safety against multiple high-powered rounds. Constructed from Heavy-duty 500 D CORDURA® Nylon: Ensures durability and long-lasting wear, even in the most challenging environments, which increases the lifespan of the product and reliability in demanding situations. Laser-cut MOLLE: Allows seamless integration of additional pouches or gear, offering versatility to customize the carrier according to mission-specific needs. CATEGORY ARMOR SPEC NIJ Threat Level Level IV Certification NIJ 0101.06 Certified Special Threat ------------- Protection Type Stand Alone     Construction Alumina ceramic & composite Exterior Cover 1000 Denier Cordura nylon     Size Nominal 9.5" x 11.5" Thickness .95" Weight 7.2 lbs Cut Shooter cut Curvature Single curve     Spall Protection Yes Multi-Hit Protection Yes Protective Area Edge to Edge Warranty 10 Years Country of Origin USA Experience the ultimate in safety and operational effectiveness with the Shellback Tactical Rampage 2.0 Active Shooter Kit featuring Level IV 4S17 Plates. Designed for dynamic scenarios, this top-of-the-line kit delivers unmatched protection while offering convenient storage for essential gear. The core of this kit is the heavy-duty Rampage 2.0 Plate Carrier. Constructed from 500 D CORDURA® nylon, it's built to withstand demanding environments. Its laser-cut MOLLE enables seamless integration of pouches and tools, while the cummerbund's six bungee retention pockets offer versatile storage for magazines, radios, and more. What sets this kit apart is the included Shellback Tactical Prevail Series Model 4S17 Level IV Hard Armor Plates. These plates are not only NIJ Level IV certified and DEA compliant but are also 100% Berry Compliant, underscoring an uncompromising commitment to quality and adherence to rigorous standards. These U.S.A-made plates offer critical protection against multiple high-powered rounds. To enhance user comfort, the carrier features 3D Spacer mesh padding, fully adjustable shoulder straps, and a customizable cummerbund. The plate carrier also comes with a removable front MOLLE placard and a practical rear drag handle for rapid extraction. Defend, protect, and prevail with the Shellback Tactical Rampage 2.0 Active Shooter Kit, offering unmatched reliability when it matters most. Rampage 2.0 Plate Carrier Features Constructed of durable 500 Denier Nylon  Front and rear plate pockets hold 10" x 12" shooter or SAPI cut ballistic plates  Laser cut Molle on front, rear and cummerbund to accessorize with pouches  Laser cut Molle loop panels on front and rear for ID placards  3D Spacer mesh padding on front, rear and shoulder pads for comfort  Removable front Molle placard  Cummerbund includes six integrated pockets with bungee retention for magazines or radios Cummerbund accepts 13.75" x 5.5" soft armor inserts  Rear drag handle Heavy duty bar tacking at key stress points Fully adjustable shoulder straps to fit most sizes   Fully adjustable cummerbund to fit most sizes  Lifetime Warranty  Imported  Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" 1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Armor Rating Ammo Type Hit Rating Multi-hit Rated M2AP 3 Rounds Multi-hit Rated M80 Ball, Steel 3 Rounds Multi-hit Rated M43 MSC PS 3 Rounds Multi-hit Rated M855 Ball 3 Rounds Multi-hit Rated 223 REM 3 Rounds Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Kit Components  Shellback Tactical Banshee Elite Plate Carrier x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Banshee Elite 2.0 Plate Carrier Features  Constructed of durable 500 denier nylon Plate pockets load from the bottom and hold 10 x 12 plates  Integrated zipper admin pouch located on chest  Extreme versatility with PALS webbing covering the front, back and shoulders of the vest 3D Mesh padding for comfort and allows air flow to keep you cool  Hypalon shoulder straps for radio wires and hydration tubes  Rear drag handle lays flat and secures with hook and loop Heavy duty bar tacking at key stress points for durability Quick release buckles on shoulders for quick on and off access  Removable cummerbund with interior and exterior PALS for side plate pocket attachment Cummerbund includes 6 integrated pockets with bungee retention for magazines or radios Cummerbund accepts 13.75" x 5.5" soft armor inserts  Carrier is fully adjustable at cummerbund and shoulder straps to fit all body types Built in rear hydration pocket accepts most common bladders Integrated nylon vertical strips to accommodate QASM buckles Two areas of loop on front and rear for id placards GSA and TAA compliant Lifetime Warranty  Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Shellback Tactical Banshee Elite 2.0 Active Shooter Kit with Level IV 4S17 Plates The Shellback Tactical Banshee Elite 2.0 Active Shooter Kit with Level IV 4S17 Plates is a superior solution for active shooter preparation and response.  This kit provides first responders protection against hand gun and rifle rounds.   Kit Components  Shellback Tactical Banshee Elite Plate Carrier x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Banshee Elite 2.0 Plate Carrier Features  Constructed of durable 500 denier nylon Plate pockets load from the bottom and hold 10 x 12 plates  Integrated zipper admin pouch located on chest  Extreme versatility with PALS webbing covering the front, back and shoulders of the vest 3D Mesh padding for comfort and allows air flow to keep you cool  Hypalon shoulder straps for radio wires and hydration tubes  Rear drag handle lays flat and secures with hook and loop Heavy duty bar tacking at key stress points for durability Quick release buckles on shoulders for quick on and off access  Removable cummerbund with interior and exterior PALS for side plate pocket attachment Cummerbund includes 6 integrated pockets with bungee retention for magazines or radios Cummerbund accepts 13.75" x 5.5" soft armor inserts  Carrier is fully adjustable at cummerbund and shoulder straps to fit all body types Built in rear hydration pocket accepts most common bladders Integrated nylon vertical strips to accommodate QASM buckles Two areas of loop on front and rear for id placards GSA and TAA compliant Lifetime Warranty  Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.   

Proudly Made in the USA and Berry Compliant: Support American industry while you ensure you're equipped with superior, locally-produced gear. NIJ 0101.06 Certified: Be confident that you're shielded by armor that meets the most rigorous industry safety standards, designed to keep our nation's bravest safe. Lightweight, Yet Robust Protection Against Handgun Rounds: Don't compromise on mobility or safety. This armor is light, allowing you to move freely and stay agile, while providing robust protection against common handgun threats. Constructed from High-Performance Woven Aramid Fibers: Rely on the strength of woven aramid fibers, crafting armor that can withstand the intensity of the field while keeping weight to a minimum. Water-Resistant Sonobond Sealed Ripstop Cover: Enhance your armor's durability and longevity with a ripstop cover, designed to keep the elements at bay, so your armor stays reliable, even in challenging conditions. Discover superior protection with the Shellback Tactical Level IIIA Model CLCIIIA Banshee Elite 3.0 Soft Armor Package. Manufactured in the USA and Berry Compliant, this package is tailored to flawlessly fit the Banshee Elite 3.0 plate carrier, providing an optimal balance of safety and comfort.Boasting NIJ 0101.06 certification, this lightweight soft armor package guarantees ballistic protection against common handgun rounds. This level of safety assurance lets you concentrate on the mission at hand, knowing you're well-protected. Available in three configurations, the package offers the flexibility to match your unique needs. You can choose from a plate backer set of two, cummerbund insert set of two, or the complete set, allowing for personalization of your protective gear.Composed of woven Aramid fibers, the armor is lightweight yet robust, presenting an aerial density of 1.55 PSF and thinness of .35". The protective cover, featuring Sonobond sealed ripstop, ensures water resistance, adding to the longevity and durability of the product.The armor comes with a five-year ballistic warranty, reflecting the confidence in its quality and performance. Note: This item is ITAR controlled and can only be shipped to US addresses. Due to the nature of this product, all sales are final.Stay shielded and order the Shellback Tactical Level IIIA Model CLCIIIA Banshee Elite 3.0 Soft Armor Package today, because your safety is their topmost priority. Rounds Defeated CARTRIDGE PROJECTILE VEL (ft/s ± 30) VEL (m/s ± 9) .357 SIG (NIJ06) 125 gr FMJ 1470 448 .44 Magnum (NIJ06) 240 gr SJHP 1430 436 .357 Magnum 158 gr JSP 1430 435 .44 Magnum 240 gr SWCGC 1400 426 9 x 19 mm  Parabellum 124 gr FMJ RN 1400 426 40 S&W 180 gr FMJ 1155 352   LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.     

Wearing the Shellback Tactical Skirmish Active Shooter Armor Kit with Level IV 4S17 Plates means taking a tactical advantage into any active shooter situation. This complete kit features the Skirmish Plate Carrier and two level IV model 4S17 hard armor plates.  Shellback Tactical Skirmish Active Shooter Kit with Level IV 4S17 Plates Kit Components Shellback Tactical Skirmish Plate Carrier x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Skirmish Plate Carrier Features 500 Denier Nylon Low profile design for mobility 3D Spacer mesh padding for comfort Front kangaroo pouch Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes Heavy duty par tacking at key stress points  Fits 10 x 12 shooter cut plates  Lifetime Warranty Imported Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Shellback Tactical Skirmish Active Shooter Kit with Level IV 4S17 Plates Kit Components Shellback Tactical Skirmish Plate Carrier x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Skirmish Plate Carrier Features 500 Denier Nylon Low profile design for mobility 3D Spacer mesh padding for comfort Front kangaroo pouch Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes Heavy duty par tacking at key stress points  Fits 10 x 12 shooter cut plates  Lifetime Warranty Imported Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER  Product Overview The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.  Ready For Anything Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike. Spartan Armor Systems® Sentinel Plate Carrier Specs: Adjustable from 38" To 48" Chest Size Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Padded Mesh Separators For The Interior Of The Carrier For Breathability Fits 10" X 12" Shooters Cut Plates Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9” X 3” Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 2lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates. SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO  Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.  Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process. Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo. IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation. Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates. Shooters Cut Plate Weight (per plate):. 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side Plate Weight (per plate):     6×6 approximately 2lbs 9oz (base coat) AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only  See a Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.  The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.  

Shellback Tactical Banshee Active Shooter Kit with Level IV 4S17 Plates The Shellback Tactical Banshee Active Shooter Kit with Level IV 4S17 Plates is a cost effective solution for active shooter preparation and response.  This kit provides protection against both hand gun and rifle rounds.  Kit Components  Shellback Tactical Banshee Rifle Plate Carrier® x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Banshee Rifle Plate Carrier® Features  Constructed of durable 500 Denier nylon  Holds 10 x 12 shooter or SAPI cut ballistic plates  Removable cummerbund with interior and exterior PALS for side plates Cummerbund accepts 13.75" x 5.5" soft armor inserts  Quick release secondary securing system Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest. Fully adjustable and padded front, back and shoulder areas. Two areas of loop on front and rear for id placards Front pocket accepts kangaroo inserts  Heavy Duty bar tacking at key stress points Wire, antenna or hydration hose guides Low profile design for mobility  Rear drag handle  Now approved with the Los Angeles Police Department (L.A.P.D.)- NTOA (NATIONAL TACTICAL OFFICER ASSOCIATION) APPROVED Lifetime warranty  GSA and TAA Compliant  Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

SHELLBACK TACTICAL PREVAIL SERIES STAND ALONE LEVEL III HARD ARMOR PLATE MODEL AR1000 The Shellback Tactical Prevail Series 10 x 12 NIJ 0101.06 Certified Stand Alone Level III Hard Armor Plate is constructed of AR1000 Advanced Armox Steel and provides level III ballistic protection against handgun and rifle rounds. This plate is NIJ 0101.06 certified and lighter weight than AR500 steel plates. Model AR1000 is designed to be thin (only .35 inches thick), coated with rhino extreme lining to prevent fragmentation spall and is very economical for military and law enforcement personnel.  Perfect for active shooter kits, order your Shellback Tactical Prevail Series 10 x 12 NIJ 0101.06 Certified Stand Alone Level III Hard Armor Plate today.    Specifications  Constructed from AR1000 Advanced Armox Steel  NIJ 0101.06 Certified  NIJ Level III rated  Listed on NIJ CPL armor list Meets DEA hard armor protocol  Shooters Cut  Multi-Hit Rated  Single curve 10" W x 12"L x .35"D Weight 6.1LBS  Rhino extreme 11-50 FR coating to prevent spall 10 year ballistic warranty  USA Made - Berry compliant  Rounds Defeated .357 SIG FMJ  9MM .38 .40 S&W .44 .45 5.56 x 45mm - M855/SS109 5.56 x 45mm - .223Rem 7.62 x 51mm - M80 7.62 x 39MM - Mild Steel Core 7.62 x 39mm - Ball Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.   DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.   

Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 4S17 Plates   The Shellback Tactical Defender 2.0 Active Shooter Armor Kit with Level IV 4S17 Plates is your complete armored kit answer to being prepared for an active shooter situation. This complete kit is packed with features - Fully adjustable lightweight carrier, two model 4S17 level IV armor plates and a convenient carry bag for storage. Stay protected and order your Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 4S17 Plates today!  Kit Components Shellback Tactical Defender 2.0 Plate Carrier x 1  Shellback Tactical Kit Carrying Bag x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Defender 2.0 Plate Carrier Features Constructed of durable 500 denier Nylon  Holds 10 x 12 shooter cut plates Lightweight laser cut molle  Fully adjustable side straps and shoulders One size fits most  Integrated padded shoulder pads for comfort Front and back molle loop panels for placards and patches Two integrated kangaroo M4 magazine pouches with bungee retention One integrated tourniquet pouch marked with a red tab for easy identification Drag handle on the rear Lifetime warranty  Imported Kit Carrying Bag Constructed of 500 denier nylon Bag will hold Shellback Defender 2.0 Plate Carrier, plates and magazines Two carrying straps Loop panels for hook placard and patches Zipper closure Lifetime warranty Imported Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Spartan Armor Systems AR550 Level III+ Armor with Achilles Laser Cut Plate Carrier Package includes: Front and Back AR550 shooters cut steel armor plates. Two 6x6 side plates. Achilles Laser Cut Plate Carrier in your choice of Black, Coyote Brown, or OD Green.  You have the option to upgrade to the ATC™ Advanced Triple Curve and Full Coat for fragmentation mitigation. Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.  Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.  Achilles Plate Carrier Specs: 1000 Denier Materials Light weight and Duty 1000 Denier laser Cut Molle Zippered Admin Pouch Kangaroo pouch with removable triple M4 Pouches Padded Shoulder Pads Padded Front and rear with ventilation vents Low Profile Drag Handle Molle Velcro front and rear for Identifier Patches 2-inch replaceable quick release buckles Accepts 10X12 and 11x14 Body Armor 6x6 or 6x8 Side Plates Fits S to XL Buy Body Armor - Level III+ Spartan AR550 Armor We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor!  With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated! Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our  ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming. Advanced Triple Curve (ATC) AR550 Spartan Body Armor. An industry FIRST! Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Level III+ Side Plates:   Choose from either 6″ x 6″ (small) or 6″ x 8″ (large) Chest Plate Weight (per plate):   10x12 AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz. Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6oz (base coat), 3lbs 12oz (full coat). Thickness:   .25″ AR550 plus approximately .25″ coating (full coat) makes this slim profile plate overall .5-.6″ in total thickness As with all of our Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited. The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.   See A Comparison of Our Full Line of Body Armor:

Kit Components  Shellback Tactical Rampage 2.0 Plate Carrier x 1 Shellback Tactical Model LON-III-P Plates x 2 Rampage 2.0 Plate Carrier Features  Constructed of durable 500 Denier Nylon  Front and rear plate pockets hold 10" x 12" shooter or SAPI cut ballistic plates  Laser cut Molle on front, rear and cummerbund to accessorize with pouches  Laser cut Molle loop panels on front and rear for ID placards  3D Spacer mesh padding on front, rear and shoulder pads for comfort  Removable front Molle placard  Cummerbund includes six integrated pockets with bungee retention for magazines or radios Cummerbund accepts 13.75" x 5.5" soft armor inserts  Rear drag handle Heavy duty bar tacking at key stress points Fully adjustable shoulder straps to fit most sizes   Fully adjustable cummerbund to fit most sizes  Lifetime Warranty  Imported  Shellback Prevail Series Model LON-III-P Level III Armor Plates  NIJ threat level III NIJ 0101.06 Certified  Listed on NIJ Compliant Products List 10"W x 12"L x 1.1"W  Weight 3.5 LBS  Single Curve  ESAPI/SAPI cut  UHWMP construction - ultra high weight molecular polyethylene  Multihit rated  600 Denier water resistant cover Positive Buoyancy USA Made 10 Year Ballistic Warranty  Stopping power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato Shellback Tactical Rampage 2.0 Lightweight Armor System with Level III LON-III-P Plates The Shellback Tactical Rampage 2.0 Lightweight Armor System is a super lightweight armor solution with a total combined weight of 9.6 LBS.  This kit combines our Rampage 2.0 plate carrier with level III model LON-III-P hard armor plates. The Shellback Tactical Rampage 2.0 Lightweight Armor System is the perfect kit for SWAT, SRT and tactical teams where mobility and function is paramount.  Kit Components  Shellback Tactical Rampage 2.0 Plate Carrier x 1 Shellback Tactical Model LON-III-P Plates x 2 Rampage 2.0 Plate Carrier Features  Constructed of durable 500 Denier Nylon  Front and rear plate pockets hold 10" x 12" shooter or SAPI cut ballistic plates  Laser cut Molle on front, rear and cummerbund to accessorize with pouches  Laser cut Molle loop panels on front and rear for ID placards  3D Spacer mesh padding on front, rear and shoulder pads for comfort  Removable front Molle placard  Cummerbund includes six integrated pockets with bungee retention for magazines or radios Cummerbund accepts 13.75" x 5.5" soft armor inserts  Rear drag handle Heavy duty bar tacking at key stress points Fully adjustable shoulder straps to fit most sizes   Fully adjustable cummerbund to fit most sizes  Lifetime Warranty  Imported  Shellback Prevail Series Model LON-III-P Level III Armor Plates  NIJ threat level III NIJ 0101.06 Certified  Listed on NIJ Compliant Products List 10"W x 12"L x 1.1"W  Weight 3.5 LBS  Single Curve  ESAPI/SAPI cut  UHWMP construction - ultra high weight molecular polyethylene  Multihit rated  600 Denier water resistant cover Positive Buoyancy USA Made 10 Year Ballistic Warranty  Stopping power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Shellback Tactical Patriot Active Shooter Kit with Level IV 4S17 Plates The Shellback Tactical Patriot Active Shooter Kit with Level IV 4S17 Plates is your complete ballistic solution for active shooter preparation and response. This kit provides law enforcement and first responders protection against hand gun and rifle rounds.  Kit Components Shellback Tactical Patriot Plate Carrier x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Patriot Plate Carrier Features  500 Denier Cordura Nylon  Lightweight adjustable space mesh shoulder pads Super lightweight - 1.5LBS  Low profile design for mobility  Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes  Loops panels on front and back for ID placards  Heavy duty par tacking at key stress points  Fits 10 x 12 shooter cut plates  GSA Compliant  TAA Compliant  Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.     

SHELLBACK TACTICAL SHIELD 2.0 ACTIVE SHOOTER KIT WITH LEVEL IV 4S17 PLATES Kit Components Shellback Tactical Shield 2.0 Plate Carrier x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Shield 2.0 Plate Carrier Features Constructed of durable 500 denier nylon Holds 10" x 12" shooter or SAPI cut ballistic plates  Lightweight laser cut MOLLE platform to customize kit with MOLLE pouches Low profile minimalist design for mobility 3D Spacer mesh shoulder pads for comfort  Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes Heavy duty par tacking at key stress points  Loop panels on front and rear for ID placards and morale patches Rear drag handle Lifetime Warranty Imported Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP

Kit Components  Shellback Tactical Banshee Rifle Plate Carrier® x 1 Shellback Tactical Model LON-III-P Plates x 2 Shellback Banshee Rifle Plate Carrier® Features  Constructed of durable 500 Denier Nylon   Removable cummerbund with interior and exterior PALS for side plate pocket attachment Cummerbund accepts 13.75" x 5.5" soft armor inserts  Quick release secondary securing system Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest Fully adjustable and padded front, back and shoulder areas. Two areas of loop on front and rear for id placards Front pocket accepts kangaroo inserts  Heavy duty bar tacking at key stress points Wire, antenna or hydration hose guides Low profile design for mobility  Rear drag handle  Lifetime warranty  Shellback Prevail Series Model LON-III-P Level III Armor Plates  NIJ threat level III NIJ 0101.06 Certified  Listed on NIJ Compliant Products List 10"W x 12"L x 1.1"W  Weight 3.5 LBS  Single Curve  ESAPI/SAPI cut  UHWMP construction - ultra high weight molecular polyethylene  Multihit rated  600 Denier water resistant cover Positive Buoyancy USA Made 10 Year Ballistic Warranty  Stopping power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato Shellback Tactical Banshee Rifle Lightweight Armor System with Level III LON-III-P Plates The Shellback Tactical Banshee Rifle Lightweight Armor System is your complete lightweight armor solution.  This kit combines our most popular Banshee Rifle Plate Carrier with two Level III Model LON-III-P hard armor plates. The total weight for the entire kit (carrier plus two plates) is only 9.2 LBS.  This lightweight armor system is the perfect kit for SWAT, SRT and tactical teams where mobility is essential.  Kit Components  Shellback Tactical Banshee Rifle Plate Carrier® x 1 Shellback Tactical Model LON-III-P Plates x 2 Shellback Banshee Rifle Plate Carrier® Features  Constructed of durable 500 Denier Nylon   Removable cummerbund with interior and exterior PALS for side plate pocket attachment Cummerbund accepts 13.75" x 5.5" soft armor inserts  Quick release secondary securing system Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest Fully adjustable and padded front, back and shoulder areas. Two areas of loop on front and rear for id placards Front pocket accepts kangaroo inserts  Heavy duty bar tacking at key stress points Wire, antenna or hydration hose guides Low profile design for mobility  Rear drag handle  Lifetime warranty  Shellback Prevail Series Model LON-III-P Level III Armor Plates  NIJ threat level III NIJ 0101.06 Certified  Listed on NIJ Compliant Products List 10"W x 12"L x 1.1"W  Weight 3.5 LBS  Single Curve  ESAPI/SAPI cut  UHWMP construction - ultra high weight molecular polyethylene  Multihit rated  600 Denier water resistant cover Positive Buoyancy USA Made 10 Year Ballistic Warranty  Stopping power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.     

Shellback Tactical Prevail Series 10 x 12 Inch Stand Alone Level III Hard Armor Plate Model LON-III-P  The Shellback Tactical Level III Hard Armor Plate Model LON-III-P provides level III threat protection weighing in at just 3.5lbs. This plate is constructed of ultra high weight molecular polyethylene (UHWMP) and comes with a 5 year ballistic warranty.  This plate is NIJ 0101.06 certified and listed on the NIJ Compliant Products list. Stay quick, lightweight and protected and order your Shellback Tactical Level III Hard Armor Plate Model LON-III-P today.  SPECIFICATIONS NIJ threat level III NIJ 0101.06 Certified  Listed on NIJ Compliant Products List 10"W x 12"L x 1.1"W  Weight 3.5 LBS  Single Curve  ESAPI/SAPI cut  UHWMP construction - ultra high weight molecular polyethylene  Multihit rated  600 Denier water resistant cover Positive Buoyancy USA Made 10 Year Ballistic Warranty  ROUNDS DEFEATED  .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.   

SHELLBACK TACTICAL SHIELD 2.0 ACTIVE SHOOTER KIT WITH LEVEL IV 1155 PLATES Kit Components Shellback Tactical Shield 2.0 Plate Carrier x 1 Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2  Shield 2.0 Plate Carrier Features Constructed of durable 500 denier nylon Holds 10" x 12" shooter or SAPI cut ballistic plates  Lightweight laser cut MOLLE platform to customize kit with MOLLE pouches Low profile minimalist design for mobility 3D Spacer mesh shoulder pads for comfort  Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes Heavy duty par tacking at key stress points  Loop panels on front and rear for ID placards and morale patches Rear drag handle Lifetime Warranty Imported Level IV Model 1155 Plate Features NIJ level IV threat protection NIJ 0101.06 certified and listed on NIJ CPL list Multi-Hit Rated Single Curve 10" x 12" SAPI cut  Weight - 8.2lbs  Stand alone protection 600 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing   Made in the USA  10 Year warranty  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.