8
Shellback Tactical Level IIIA Spec Ops ACH High Cut Ballistic Helmet
$889.99
$1,099.99
Specifications
Protection level
Level IIIA
Material
Aramid
Sizes
XLarge, Medium, Large
Shellback Tactical Level IIIA Ballistic High Cut SF ACH Helmet
The Shellback Tactical Level IIIA Ballistic High Cut SF ACH Helmet is our top of the line elite ballistic helmet designed for special operation missions. This helmet features side rails, 3 hole nvg shroud, loop panels, bungee cords and ratcheting retention system. The low profile high cut design provides easy access to radio headsets, reduced weight and easy target acquisition without interference. This helmet provides level IIIA ballistic and frag protection. Be ready for the fight and order your Shellback Tactical Level IIIA Ballistic High Cut SF ACH Helmet today!
Specifications
ACH - Advance Combat Helmet
Meets NIJ 0106.01 Standard
Level IIIA ballistic protection against handgun rounds
Fragmentation protection according to Milstd 662f standards
High cut design is lightweight and increases mobility
Constructed with Kevlar fibers and thermoset resin
Retention harness with ratcheting system for perfect fit
Side rails fit picatinny and other common adapters which is perfect for tactical lights and cameras
3 hole shroud is compatible with most modern NVG mounts such as Wilcox and Norotos
Loop field allows for the secure, quick and easy attachment of helmet accessories
D30 Trust 7 helmet pad system provides extra comfort
5 Year Ballistic Warranty
Sizing
Circumference is measured around head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes.
Medium
Circumference - 21.9" to 22.7"
Hat Size - 6 7/8 - 7 1/8
Weight - 3.1 lbs
Large
Circumference - 22.7" to 24"
Hat Size - 7 1/4 - 7 3/8
Weight - 3.2 lbs
XLarge
Circumference - 24" to 26"
Hat Size - 7 1/2 to 7 3/4
Weight - 3.4 lbs
Rounds Defeated
357 SIG FMJ
9MM
.38
.40 S&W
.44 MAG
LEGAL
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Shellback Tactical Level IIIA ACH Standard Cut Ballistic Helmet
$559.99
$679.99
Specifications
Protection level
Level IIIA
Material
Aramid
Sizes
XLarge, Medium, Large
Shellback Tactical Level IIIA Ballistic Standard Cut ACH Helmet
The Shellback Tactical Level IIIA Ballistic Standard Cut ACH Helmet provides both level IIIA ballistic and MilStd 662f fragmentation protection. This ballistic helmet is the improved version of the PASGT helmet that has been worn by military personnel for decades. The ACH design allows for greater line of sight, ability to add communication devices and features a comfortable seven piece pad system. Stay protected against ballistic threats and order your Shellback Tactical Level IIIA Ballistic Standard Cut ACH Helmet today!
Specifications
ACH - Advanced Combat Helmet
Meets NIJ 0106.01 Standard
Level IIIA Ballistic protection
Frag protection according to MilStd 662f standards
Kevlar fibers and thermoset resin shell construction
Adjustable 4 point retention harness
D3O TRUST 7 Pad helmet pad system
Five year ballistic warranty
Sizing
Circumference is measured around head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes.
Medium
Circumference - 21.9" to 22.7"
Hat Size - 6 7/8 - 7 1/8
Weight - 2.9 lbs
Large
Circumference - 22.7" to 24"
Hat Size - 7 1/4 - 7 3/8
Weight - 3 lbs
XLarge
Circumference - 24" to 26"
Hat Size - 7 1/2 to 7 3/4
Weight - 3.2 lbs
Rounds Defeated
357 SIG FMJ
9MM
.38
.40 S&W
.44 MAG
Legal
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Shellback Tactical Level IIIA ACH High Cut Ballistic Helmet
from $549.99
$679.99
Shellback Tactical Level IIIA Ballistic Mid Cut ACH Helmet with Ratchet Dial Harness
The Shellback Tactical Level IIIA Ballistic Mid Cut ACH Helmet with Ratchet Dial Harness provides level IIIA ballistic protection, frag protection and impact protection. The mid cut profile high cut design reduces weight, provides room to access communication equipment and reduces interference for target acquisition. This helmet features a ratchet dial harness to adjust for the perfect fit. Be ready to fight and order your Shellback Tactical Level IIIA Ballistic Mid Cut ACH Helmet with Ratchet Dial Harness today!
Specifications
ACH - Advanced Combat Helmet
Mid cut design for increased mobility and weight reduction
Meets NIJ 0106.01 Standard
Level IIIA Ballistic protection against handgun rounds
Frag protection according to MilStd 662f standards
Kevlar fibers and thermoset resin shell construction
Ratchet dial harness retention harness
D3O TRUST 7 Pad helmet pad system provides comfort
5 Year Ballistic Warranty
Sizing
Circumference is measured around head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes.
Medium
Circumference - 21.9" to 22.7"
Hat Size - 6 7/8 - 7 1/8
Weight - 2.8 lbs
Large
Circumference - 22.7" to 24"
Hat Size - 7 1/4 - 7 3/8
Weight - 2.9 lbs
XLarge
Circumference - 24" to 26"
Hat Size - 7 1/2 to 7 3/4
Weight - 3.1 lbs
Rounds Defeated
357 SIG FMJ
9MM
.38
.40 S&W
.44 MAG
Legal
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Shellback Tactical Neptune SF LW High Cut Ballistic Helmet
$1,099.99
$1,299.99
A lightweight Level IIIA high cut helmet for military, law enforcement and tactical professionals. The Neptune SF LW is boltless, made in the USA, and built to take lights, cameras and NVG mounts.
WHY THIS HELMET
Rated for handguns: NIJ 0106.01 Level IIIA, with the rounds tested listed below.
Boltless: there are no holes drilled through the shell, which reduces weight and increases strength, and accessories are attached with advanced adhesive instead of bolts that work loose.
Easy comms access: the high cut design is lightweight and allows easy access to comms.
Ready for gear: boltless ASR side rails fit picatinny and other common adapters, the boltless Unity shroud is compatible with most modern NVG mounts, and a V2 Loop field takes accessories.
Comfort: a boltless Airlink Prime retention system and a D30 Halo helmet pad system for comfort and blunt impact protection.
Made in the USA, lightweight shell: built from a proprietary blend of polyethylene and composite materials, .3" (8mm) thick.
HOW IT COMPARES
The Neptune SF LW weighs 2.5 lbs total in Medium, against 3.1 lbs for the RRV ACH helmet, and is boltless where the RRV uses a ratcheting harness. It's Level IIIA like the RRV, and also lists special threat testing against FN 5.7 x 28mm.
QUESTIONS BUYERS ASK
What does it stop? It is rated NIJ 0106.01 Level IIIA. The rounds tested, including special threat FN 5.7 x 28mm, are in the table below. It is not a rifle rated helmet.
How do I pick a size? Measure around your head where the helmet will sit, mid forehead and about 1/8" above your ear, and match it to the size chart below. If you fall on a dividing line, choose the larger size.
How heavy is it? Total weight is 2.5 lbs in Medium, 2.7 lbs in Large and 2.8 lbs in X-Large.
Is there a cover? Yes, the Neptune High Cut Ballistic Helmet Cover is made for it.
BUY WITH CONFIDENCE
Free shipping: on orders over $199.
Price-match guarantee: find a lower in-stock price on our site or at an authorized online retailer within 6 months of your purchase and we refund the difference on the item price and shipping (not tax). Auction and discount sites, rebates and BOGO offers are excluded. See the price-match terms.
Pay over time: Shop Pay Installments, provided by Affirm, on orders from $50 to $3,000, subject to an eligibility check. How financing works.
Where we ship: US addresses only. Body armor can't ship to New York civilians.
BALLISTIC HELMET SPECIFICATIONS
Level IIIA ballistic protection
Meets NIJ 0106.01 standard
Constructed of a proprietary blend of polyethylene and composite materials
Shell thickness .3" or 8mm
Completely boltless design reduces weight and increases strength. Traditional bolted systems require drilling 4 to 11 holes through ballistic shell which increases weight
Advanced adhesive technology is used to securely attach all helmet accessories. Unlike bolted systems, there is no need to constantly tighten or replace lost bolts
Compression resistance in accordance with US Army AR/PD 14-01
Fragmentation protection in accordance with MIL-STD 662F
Protect your helmet with our Neptune High Cut Ballistic Helmet Cover
High cut design is lightweight and allows easy access to comms
Boltless Airlink Prime Helmet Retention System for perfect fit
Boltless ASR side rails fit picatinny and other common adapters. Rails make it easy to attach helmet lights, cameras, comms, visors and more
Boltless Unity shroud is compatible with most modern NVG mounts
Advanced V2 Loop field allows for the secure, quick and easy attachment of helmet accessories
D30 Halo helmet pad system provides comfort and blunt impact protection
Made in the USA
NEPTUNE HELMET SIZE AND WEIGHTS
Circumference is measured around head, similar to hat sizing. All sizes are measured in inches.
Start with a measuring tape (or a piece of string you can measure later), and wrap it around your head. Place the tape where your helmet will typically sit at the middle of your forehead and about 1/8" above your ear. Hold the tape firmly, but not uncomfortably tight. Find your size using the chart below.
If a measurement falls on a dividing line between sizes, select the larger of the two sizes.
Helmet Size
Hat Size
Head Circumference
Shell Weight
Total Weight
Medium
6 3/4 to 7 1/8
21.3" to 22.5"
2.1 lbs
2.5 lbs
Large
7 1/4 to 7 1/2
22.5" to 23.5"
2.2 lbs
2.7 lbs
Xlarge
7 1/2 to 7 3/4
23.5" to 25.5"
2.3 lbs
2.8 lbs
BALLISTIC TEST DATA - ROUNDS DEFEATED
All ballistic testing is completed by a NIJ certified laboratory
9mm FMJ back face deformation less than 25mm at 1400 fps
Standard
Projectile
Grain
Velo Ft/S
NIJ 0106.01
9mm FMJ
125
1400
NIJ 0106.01
.357 MAG JSP
158
1395
NIJ 0106.01
.44 MAG SJHP
240
1400
NIJ 0106.01
.40 S&W GDHP
180
1055
NIJ 0106.01
.45 ACP FMJ
230
1075
Special
FN 5.7 x 28mm
27
2000