Level IV (Rifle)

Shellback Tactical Prevail Series 10 x 12 NIJ 0101.06 Certified Level IV Hard Armor Plate Model 1155 The Shellback Tactical 1155 Level IV Hard Body Armor Plate is a single-curve ballistic rifle plate designed to withstand rigorous usage. This hard body armor plate was designed to protect the user who has their lives on the line in critical situations. By wearing Shellback Tactical 1155 Level IV Hard Body Armor Plate it will instill confidence in the user and let them know that at the end of the day they will go home to the ones they love. If you are looking for a single-curve ballistic rifle plate that was designed to instill confidence then the Shellback Tactical 1155 Level IV Hard Body Armor Plate is where your search ends. Place your order today! Specifications NIJ threat level IV NIJ 0101.06 Certified Listed on NIJ CPL List SAPI/ESAPI Cut Weight 8.2lbs Stand alone protection Single curve Single plate 10” W x 12” L X 1” D Multihit Rated  M2AP - 5 Rounds  3 Rounds Total  B32,API - 1 Round  M855A1 - 1 Round  M193 - 1 Round  Constructed of monolithic ceramic face and polyethylene backing  600 Denier water resistant cover  10 year ballistic warranty USA Made - Berry Compliant GSA and TAA Compliant  ROUNDS DEFEATED  .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP   LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Shellback Tactical Patriot Active Shooter Kit with Level IV 1155 Plates The Shellback Tactical Patriot Active Shooter Kit with Level IV 1155 Plates is your complete ballistic solution for active shooter preparation and response. This kit provides law enforcement and first responders protection against hand gun and rifle rounds.  Kit Components Shellback Tactical Patriot Plate Carrier x 1 Shellback Tactical Prevail 1155 Level IV 10 x 12 Hard Armor Plates x 2 Patriot Plate Carrier Features  500 Denier Cordura Nylon  Lightweight adjustable space mesh shoulder pads Super lightweight - 1.5LBS  Low profile design for mobility  Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes  Loops panels on front and back for ID placards  Heavy duty par tacking at key stress points  Fits 10 x 12 shooter cut plates  GSA Compliant  TAA Compliant  Level IV 1155 Plate Features NIJ 0101.06 Certified Meets level IV standards   10" W x 12" L x 1"D Weight - 8.3lbs  SAPI Cut  Made of Monolithic ceramic and polyethylene  Made in the USA  10 Year warranty on ballistics  Stopping Power  .357 SIG FMJ 9MM .38 40S&W .45 ACP .223 BALL  5.56 X 45  7.62 X 39 BALL  7.62 X 51 M80 NATO  M855/SS109 7.62 X 63 M2AP  Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.     

The Shellback Tactical Rampage 2.0 Active Shooter Armor Kit with Level IV 1155 Plates is your ultimate armored kit solution to being prepared for an active shooter situation. This complete kit features our popular Rampage 2.0 plates carrier and two level IV model 1155 hard armor plates. Shellback Tactical Rampage 2.0 Active Shooter Kit with Level IV 1155 Plates  The Shellback Tactical Rampage 2.0 Active Shooter Armor Kit with Level IV 1155 Plates is your ultimate armored kit solution to being prepared for an active shooter situation. This complete kit features our popular Rampage 2.0 plates carrier and two level IV model 1155 hard armor plates. Stay protected and order your Shellback Tactical Rampage 2.0 Active Shooter Kit with Level IV 1155 Plates today! KIT COMPONENTS Shellback Tactical Rampage 2.0 Plate Carrier x 1 Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2  RAMPAGE 2.0 PLATE CARRIER FEATURES Constructed of durable 500 Denier Nylon  Front and rear plate pockets hold 10" x 12" shooter or SAPI cut ballistic plates  Laser cut Molle on front, rear and cummerbund to accessorize with pouches  Laser cut Molle loop panels on front and rear for ID placards  3D Spacer mesh padding on front, rear and shoulder pads for comfort  Removable front Molle placard  Cummerbund includes six integrated pockets with bungee retention for magazines or radios Cummerbund accepts 13.75" x 5.5" soft armor inserts  Rear drag handle Heavy duty bar tacking at key stress points Fully adjustable shoulder straps to fit most sizes   Fully adjustable cummerbund to fit most sizes  Lifetime Warranty  Imported  LEVEL IV MODEL 1155 PLATE FEATURES NIJ level IV threat protection NIJ 0101.06 certified and listed on NIJ CPL list Multi-Hit Rated Single Curve 10" x 12" SAPI cut  Weight - 8.2lbs  Stand alone protection 600 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing   Made in the USA  10 Year warranty  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.

Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ Ares Level IV Ceramic Body Armor - Set of Two Plates The Ares level IV ceramic body armor plate is our toughest and lightest level IV plate yet. With a boron carbide strike face and UHMWPE backer, the Ares is a military grade plate that has been laboratory tested and proven to defeat .30-06 M2AP armor piercing rounds. Boron carbide is one of the hardest materials known to man. However, it’s lighter than other softer ceramics such as aluminum oxide, which is used in most civilian grade body armor. The Ares is a superior level IV plate that is proudly manufactured in our Tucson, AZ facility. Lightweight Level IV Protection It’s no secret that speed, agility and stamina are critical during hostile engagements. While many level IV ceramic body armor plates weigh around 7 or 8 lbs per plate, the Ares weighs in at just 6.1 lbs per plate.  Not only does the Ares plate provide the operator with a clear weight advantage, but the boron carbide strike face easily destroys .30-06 M2 AP rounds upon impact. The lightweight UHMWPE backer catches the remaining bullet fragments preventing any penetration or secondary spall injury to the operator.  The Ares level IV ceramic body armor plate is the perfect choice for Law Enforcement, Security Contractors, Military, First Responders or even concerned civilians looking for advanced threat protection and safety. Full Edge-To-Edge ESAPI Protection Get what you're paying for with full edge-to-edge protection! The Ares provides maximum protection for vital organs in a full 9.5" x 12.5" medium ESAPI shooters cut profile. This allows for better protection to the operator in the event of near-edge impacts. The highly compatible ESAPI sizing gives the operator the freedom to choose from a wide range of plate carriers. The Ares features a traditional multicurve design for added comfort during extended duty use. Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ

Shellback Tactical Banshee Active Shooter Kit with IV 1155 Plates The Shellback Tactical Banshee Active Shooter Kit with Level IV 1155 Plates is a cost effective solution for active shooter preparation and response.  This kit provides protection against both hand gun and rifle rounds.  Kit Components  Shellback Tactical Banshee Rifle Plate Carrier® x 1 Shellback Tactical Prevail 1155 Level IV 10 x 12 Hard Armor Plates x 2  Banshee Rifle Plate Carrier® Features  Constructed of durable 500 Denier nylon  Holds 10 x 12 shooter or SAPI cut ballistic plates  Removable cummerbund with interior and exterior PALS for side plates Cummerbund accepts 13.75" x 5.5" soft armor inserts  Quick release secondary securing system Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest. Fully adjustable and padded front, back and shoulder areas. Two areas of loop on front and rear for id placards Front pocket accepts kangaroo inserts  Heavy Duty bar tacking at key stress points Wire, antenna or hydration hose guides Low profile design for mobility  Rear drag handle  Now approved with the Los Angeles Police Department (L.A.P.D.)- NTOA (NATIONAL TACTICAL OFFICER ASSOCIATION) APPROVED Lifetime warranty  GSA and TAA Compliant  Level IV 1155 Plate Features NIJ 0101.06 Certified  10" W x 12" L x 1"D Weight - 8.3lbs  SAPI Cut  Made of Monolithic ceramic and polyethylene  Made in the USA  10 Year warranty on ballistics  Stopping Power  .357 SIG FMJ 9MM .38 40S&W .45 ACP .223 BALL  5.56 X 45  7.62 X 39 BALL  7.62 X 51 M80 NATO  M855/SS109 7.62 X 63 M2AP  LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA   Product Overview  True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.    Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing.   Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.    Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch      Spartan Armor Systems ® Hercules Level IV Ceramic Advanced Compound Curve Body Armor -  Set of Two Plates   Product Overview The Hercules level IV body armor plate is manufactured in-house at the Spartan Armor Systems® facility in Tucson, AZ utilizing ballistic ceramic and UHMWPE materials. As with all body armor manufactured by Spartan Armor Systems®, the Hercules level IV ceramic body armor plate has been independently tested and verified by an NIJ Certified laboratory. Each Hercules level IV body armor plate is rated to stop armor piercing rifle rounds up to .30-06 M2 AP. Weighing in at just 6.9 lbs per plate, the Hercules is noticeably lighter than most level IV ceramic body armor plates available. With full edge-to-edge 10”x12” coverage and Advanced Compound Curve design, the Hercules is ideal for operators in need of maximum protection and comfort.    Full Edge-To-Edge Protection Get what you pay for! It might not be obvious, but some 10”x12” level IV ceramic body armor plates on the market only provide protection in a 8”x10” area to keep manufacturing costs low. However, the Hercules ceramic body armor plate provides full 10”x12” edge-to-edge protection for the operator. When your life is on the line, don’t take chances with other ceramic plates that measure 10”x12”, but only provide an 8”x10” area of protection. Buy ceramic level IV body armor plates that give you the protection you’re paying for.     Advanced Compound Curve - True Multi-Curve Design The Hercules level IV body armor plate features our Advanced Compound Curve (ACC). While many body armor plates claim to be “multi-curve”, the ACC profile is a true multi-curve design providing the operator with the most comfortable fit of any ceramic level IV body armor plate. This advanced ergonomic design is especially important during extended duty engagements, typical of Law Enforcement, Security, and Military operations.   Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Ceramic & UHMWPE Plate Size: 10”x12” Protection Area: 10”x12” Weight: 6.9 lbs Thickness: 1.1” Plate Quantity: Two (2) Plates Included Curve Profile: Advanced Compound Curve Cut: SAPI/ESAPI (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Condura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ.   NOTE: Ceramic armor cannot be resold, therefore ALL sales for this product are final. No returns or exchanges accepted.

Spartan Armor Systems ® Hercules Level IV Ceramic Advanced Compound Curve Body Armor -  Set of Two Plates Product Overview The Hercules level IV body armor plate is manufactured in-house at the Spartan Armor Systems® facility in Tucson, AZ utilizing ballistic ceramic and UHMWPE materials. As with all body armor manufactured by Spartan Armor Systems®, the Hercules level IV ceramic body armor plate has been independently tested and verified by an NIJ Certified laboratory. Each Hercules level IV body armor plate is rated to stop armor piercing rifle rounds up to .30-06 M2 AP. Weighing in at just 6.9 lbs per plate, the Hercules is noticeably lighter than most level IV ceramic body armor plates available. With full edge-to-edge 10”x12” coverage and Advanced Compound Curve design, the Hercules is ideal for operators in need of maximum protection and comfort.  Full Edge-To-Edge Protection Get what you pay for! It might not be obvious, but some 10”x12” level IV ceramic body armor plates on the market only provide protection in a 8”x10” area to keep manufacturing costs low. However, the Hercules ceramic body armor plate provides full 10”x12” edge-to-edge protection for the operator. When your life is on the line, don’t take chances with other ceramic plates that measure 10”x12”, but only provide an 8”x10” area of protection. Buy ceramic level IV body armor plates that give you the protection you’re paying for.   Advanced Compound Curve - True Multi-Curve Design The Hercules level IV body armor plate features our Advanced Compound Curve (ACC). While many body armor plates claim to be “multi-curve”, the ACC profile is a true multi-curve design providing the operator with the most comfortable fit of any ceramic level IV body armor plate. This advanced ergonomic design is especially important during extended duty engagements, typical of Law Enforcement, Security, and Military operations. Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Ceramic & UHMWPE Plate Size: 10”x12” Protection Area: 10”x12” Weight: 6.9 lbs Thickness: 1.1” Plate Quantity: Two (2) Plates Included Curve Profile: Advanced Compound Curve Cut: SAPI/ESAPI (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Condura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ.   NOTE: Ceramic armor cannot be resold, therefore ALL sales for this product are final. No returns or exchanges accepted.

Highlights NIJ Certified Level IV Made with Ceramic Materials User-Friendly Design Fully Sealed with 1000D Cordura, Textured Nylon Stand Alone What’s Included 1 Level IV NIJ Certified 10" x 12" Ceramic Plate Shooters Cut Specifications NIJ Certified Size 10” x 12” Shooters Cut Weight (lbs): 7.2 Thickness: .95” Tolerances: +/_ .25” - +/_ 0.25 lbs Level IV Ceramic Plate Introducing the Body Armor Direct Level IV Ceramic plate offering that is made of Ceramic materials and is NIJ Certified. Made with ceramics and special pressing techniques the single curve design fits to the body for maximum safety and comfort for a lighter, thinner, high performing plate. Rugged, reliable, and stress fracture resistant. Highlights NIJ Certified Level IV Made with Ceramic Materials User-Friendly Design Fully Sealed with 1000D Cordura, Textured Nylon Stand Alone What’s Included 1 Level IV NIJ Certified 10" x 12" Ceramic Plate Shooters Cut Specifications NIJ Certified Size 10” x 12” Shooters Cut Weight (lbs): 7.2 Thickness: .95” Tolerances: +/_ .25” - +/_ 0.25 lbs

Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch  Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.  Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing. Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.  Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch  Ares Level IV Ceramic Body Armor - Set of Two Plates The Ares level IV ceramic body armor plate is our toughest and lightest level IV plate yet. With a boron carbide strike face and UHMWPE backer, the Ares is a military grade plate that has been laboratory tested and proven to defeat .30-06 M2AP armor piercing rounds. Boron carbide is one of the hardest materials known to man. However, it’s lighter than other softer ceramics such as aluminum oxide, which is used in most civilian grade body armor. The Ares is a superior level IV plate that is proudly manufactured in our Tucson, AZ facility. Lightweight Level IV Protection It’s no secret that speed, agility and stamina are critical during hostile engagements. While many level IV ceramic body armor plates weigh around 7 or 8 lbs per plate, the Ares weighs in at just 6.1 lbs per plate.  Not only does the Ares plate provide the operator with a clear weight advantage, but the boron carbide strike face easily destroys .30-06 M2 AP rounds upon impact. The lightweight UHMWPE backer catches the remaining bullet fragments preventing any penetration or secondary spall injury to the operator.  The Ares level IV ceramic body armor plate is the perfect choice for Law Enforcement, Security Contractors, Military, First Responders or even concerned civilians looking for advanced threat protection and safety. Full Edge-To-Edge ESAPI Protection Get what you're paying for with full edge-to-edge protection! The Ares provides maximum protection for vital organs in a full 9.5" x 12.5" medium ESAPI shooters cut profile. This allows for better protection to the operator in the event of near-edge impacts. The highly compatible ESAPI sizing gives the operator the freedom to choose from a wide range of plate carriers. The Ares features a traditional multicurve design for added comfort during extended duty use. Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ

Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 1155 Plates   The Shellback Tactical Defender 2.0 Active Shooter Armor Kit with Level IV 1155 Plates is your complete armored kit answer to being prepared for an active shooter situation. This complete kit is packed with features - Fully adjustable lightweight carrier, two model 1155 level IV armor plates and a convenient carry bag for storage. Stay protected and order your Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 1155 Plates today!  Kit Components Shellback Tactical Defender 2.0 Plate Carrier x 1  Shellback Tactical Kit Carrying Bag x 1 Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2  Defender 2.0 Plate Carrier Features Constructed of durable 500 denier Nylon  Holds 10 x 12 shooter cut plates Lightweight laser cut molle  Fully adjustable side straps and shoulders One size fits most  Integrated padded shoulder pads for comfort Front and back molle loop panels for placards and patches Two integrated kangaroo M4 magazine pouches with bungee retention One integrated tourniquet pouch marked with a red tab for easy identification Drag handle on the rear Lifetime warranty  Imported Kit Carrying Bag Constructed of 500 denier nylon Bag will hold Shellback Defender 2.0 Plate Carrier, plates and magazines Two carrying straps Loop panels for hook placard and patches Zipper closure Lifetime warranty Imported LEVEL IV MODEL 1155 PLATE FEATURES NIJ level IV threat protection NIJ 0101.06 certified and listed on NIJ CPL list Multi-Hit Rated Single Curve 10" x 12" SAPI cut  Weight - 8.2lbs  Stand alone protection 600 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing   Made in the USA  10 Year warranty  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

The Shellback Tactical Skirmish Active Shooter Armor Kit with Level IV 1155 Plates is tactical armored kit solution to being prepared for an active shooter situation. This complete kit features the Skirmish Plate Carrier and two level IV model 1155 hard armor plates. Shellback Tactical Skirmish Active Shooter Kit with Level IV 1155 Plates Kit Components Shellback Tactical Skirmish Plate Carrier x 1 Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2  Skirmish Plate Carrier Features 500 Denier Nylon Low profile design for mobility 3D Spacer mesh padding for comfort Front kangaroo pouch Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes Heavy duty par tacking at key stress points  Fits 10 x 12 shooter cut plates  Lifetime Warranty Imported Level IV Model 1155 Plate Features NIJ level IV threat protection NIJ 0101.06 certified and listed on NIJ CPL list Multi-Hit Rated Single Curve 10" x 12" SAPI cut  Weight - 8.2lbs  Stand alone protection 600 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing   Made in the USA  10 Year warranty  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.