Spartan Armor Systems AR550 Body Armor Shooters Cut Set Of Two
from $189.52
$203.18
SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SHOOTERS CUT SET OF TWO
Product Overview
Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.
Protective Value Added
We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.
Battle Hardened
Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Blazing The Trail of Innovation
Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates.
Plate Weight (per plate):
8”x10” AR550 Shooters Cut: Base Coat 5lbs 5oz. Full Coat 6lbs 1oz.
10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz.
11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs.
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.
AR550 Body Armor - Shooters Cut Specs:
Made in U.S.A.
Special Threat Tested to Level III+ Standards
Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See a Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
19
Spartan Armor Systems AR550 Body Armor Swimmers Cut Set Of Two
from $164.57
$176.44
Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor is specifically designed to feature a streamlined cut, which reduces overall weight, enhances mobility, comfort, and ergonomics in the field while affording this higher degree of threat protection.
SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SWIMMERS CUT SET OF TWO
Product Overview
Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor is specifically designed to feature a streamlined cut, which reduces overall weight, enhances mobility, comfort, and ergonomics in the field while affording this higher degree of threat protection. As with our other AR550 body armor products, Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications.
Protective Value Added
We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.
Battle Hardened
Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.
Blazing The Trail of Innovation
Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates.
Chest Plate Weight (per plate):
8x10 AR550 Swimmers Cut: Base Coat 4lbs 6oz. Full Coat 4lbs 14oz.
10x12 AR550 Swimmers Cut: Base Coat 6lbs 10oz. Full Coat 7lbs 8oz.
11x14 AR550 Swimmers Cut: Base Coat 8lbs 5oz. Full Coat 8lbs 13oz.
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.
AR550 Body Armor - Swimmers Cut Specs:
Made in U.S.A.
Special Threat Tested to Level III+ Standards
Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See a Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
Spartan Armor Systems AR550 Body Armor Side Plates Set Of Two
from $67.58
$72.46
Level III+ Spartan AR550 Armor
We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor! With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!
Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive two side plates. Choose from either 6″ x 6″ (small) or 6″ x 8″ (large)
Side Plate Weight (per plate): 6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6 oz (base coat), 3lbs 12oz (full coat).
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Please see our FAQ for weight specifications and other questions you may have.
As with all of our AR550 Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
See A Comparison of Our Full Line of Body Armor:
24
Spartan Armor Systems AR500 And Legion Xl Plate Carrier Package
from $392.12
$420.40
Specifications:
Durable emergency drag handle
Anti-Slip shoulder padding w/ velcro
Side release buckles on internal waist strap
Elevated mesh allowing for extreme breathability
Holds 11x14 Front and Back Plates
Removable cummerbund with side plate pockets for 6x6 and 6x8 armor
Velcro in front of the Carrier is 8x4 w/ a velcro loop on each side
Velcro on the back of the Carrier measures 9x3
Stronger carrier material that can withstand through wear and tear over a long period of time
1000 denier
Bottom loading
Spartan Armor Systems Sentinel Legion XL Plate Carrier with Level III AR500 Plates
You asked for it, we produced it. We value our customers opinions and suggestions, from all the recommendations we've had for the next plate carrier design, we came up with a Sentinel Legion XL Plate Carrier that is fully adjustable from a 2XL-4XL. It will hold our Steel Core AR500 Omega, and AR550 11x14 body armor plates true to form. You also have the option to add in 6x6 or 6x8 side plates. If you don't want to run with the cummerbund no problem! The cummerbund is completely removable to run your plate carrier with just front and back plates or the full set up with side plates. User friendly.
Specifications:
Durable emergency drag handle
Anti-Slip shoulder padding w/ velcro
Side release buckles on internal waist strap
Elevated mesh allowing for extreme breathability
Holds 11x14 Front and Back Plates
Removable cummerbund with side plate pockets for 6x6 and 6x8 armor
Velcro in front of the Carrier is 8x4 w/ a velcro loop on each side
Velcro on the back of the Carrier measures 9x3
Stronger carrier material that can withstand through wear and tear over a long period of time
1000 denier
Bottom loading
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates!
14
Spartan Armor Systems AR550 Leonidas Plate Carrier Package
from $502.56
$538.80
Advanced plate carrier that is feature packed
500 Denier
Front Top Zippered Admin Pouch
Front Lower Velcro kangaroo pouch
PALS web attachment points covering the front, back and shoulders of the vest
Mil spec laser cut PALS Webbing on the shoulders
Cummerbund is designed to hold a 5"x15" IIIA soft armor inside each side.
Cummerbund has a proprietary retained shock cord system to allow stretch while being held in place to stop sagging.
Cummerbund is removable and the carrier is equipped with removable quick release buckles
Genuine US Mil Spec Webbing
Velcro on the back Drag Handle keeps it in place
Heavy Duty bar tacking at key stress points
Communication or hydration hose guides
Padded Front and back interior of carrier with airflow channels sewn in
Front and back areas of Velcro for identifiers
Bottom Loading Plate Pockets accepts 10x12, SAPI and Similar Armor
All pieces Made in USA, assembled in Mexico
*Note* This plate carrier by itself will only hold 5x15 Soft Armor Panels, this package will come with a molle system to attach on your 6x6 or 6x8 side plates.
Leonidas Plate Carrier System with AR550 Omega Body Armor
The Leonidas plate carrier is an advanced plate carrier system is fit for a Spartan King, hence the name "Leonidas". This versatile plate carrier hosts a wide variety of proven features including a removable cummerbund. When you are looking for the toughest plate carrier available to take into battle this is it. Take a look at all the features below.
Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.
Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?
Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.
Advanced plate carrier that is feature packed
500 Denier
Front Top Zippered Admin Pouch
Front Lower Velcro kangaroo pouch
PALS web attachment points covering the front, back and shoulders of the vest
Mil spec laser cut PALS Webbing on the shoulders
Cummerbund is designed to hold a 5"x15" IIIA soft armor inside each side.
Cummerbund has a proprietary retained shock cord system to allow stretch while being held in place to stop sagging.
Cummerbund is removable and the carrier is equipped with removable quick release buckles
Genuine US Mil Spec Webbing
Velcro on the back Drag Handle keeps it in place
Heavy Duty bar tacking at key stress points
Communication or hydration hose guides
Padded Front and back interior of carrier with airflow channels sewn in
Front and back areas of Velcro for identifiers
Bottom Loading Plate Pockets accepts 10x12, SAPI and Similar Armor
All pieces Made in USA, assembled in Mexico
*Note* This plate carrier by itself will only hold 5x15 Soft Armor Panels, this package will come with a molle system to attach on your 6x6 or 6x8 side plates.
Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel perfectly hits the “sweet spot”. It’s much harder than AR500, but not too hard to cause severe stress while forming.
Our AR550 Spartan Body Armor now has the option of Advanced Triple Curve (ATC). An industry FIRST! Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates, and optional side plates
Level III+ Side Plates: Choose from either 6″ x 6″ (small) or 6″ x 8″ (large)
Full Coat or Base Coat Options:
We are excited to announce our potentially “life saving” breakthrough! The strike face for our plates is mark embedded with our Spartan logo! Both sides of these plates are coated, however, the back side only has a “courtesy coat” to protect against wear and rust. The front of the plate is lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™. The result is a plate approximately 1/2-5/8” total thickness. See our FAQ for more information about our Encapsaloc ™ process. By purchasing, you will receive (2) Formed Spartan™ Omega™ AR500 Body Armor 10″x12” chest plates. Due to popular demand, we have added a “base coat” only option for our AR500 Omega™ armor products. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.
10
Spartan Armor AR550 Level III+ Body Armor And 221B Tactical Phantom Plate Carrier
from $373.95
$399.94
FEATURES:
Maxx-Dri Technology offers 100% breathability compared to traditional PCs
Ultra Lightweight
Ultra Fast Donning and Doffing
Ideal for donning over a Police Uniform
Lightning Fast Infinity Adjustment System for a truly Custom Fit
Anti-Gravity weight management technology
Heavy Duty Mil-spec construction
Heavy Duty Genuine YKK buckles and straps
Molle and Velcro Molle front and rear
Front Velcro for ID patches
Heavy Duty Rear Drag/Rescue Handle
Available with rifle and pistol mag pouches and pistol holster (chest)
(2) LEVEL 3+ AR550 10x12 Shooters Cut Plates
This plate carrier was designed by 221B Tactical
SIZING:
One Size Fits All (Adjustable Heavy Duty Genuine YKK Side Release Buckles and Straps)
Spartan Armor AR550 Level III+ Body Armor and 221B Tactical Phantom Plate Carrier
Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.
Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?
Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.
FEATURES:
Maxx-Dri Technology offers 100% breathability compared to traditional PCs
Ultra Lightweight
Ultra Fast Donning and Doffing
Ideal for donning over a Police Uniform
Lightning Fast Infinity Adjustment System for a truly Custom Fit
Anti-Gravity weight management technology
Heavy Duty Mil-spec construction
Heavy Duty Genuine YKK buckles and straps
Molle and Velcro Molle front and rear
Front Velcro for ID patches
Heavy Duty Rear Drag/Rescue Handle
Available with rifle and pistol mag pouches and pistol holster (chest)
(2) LEVEL 3+ AR550 10x12 Shooters Cut Plates
This plate carrier was designed by 221B Tactical
SIZING:
One Size Fits All (Adjustable Heavy Duty Genuine YKK Side Release Buckles and Straps)
26
Spartan Armor Systems AR550 Body Armor Shooters Cut And Spartan Plate Carrier Entry Level Package
$324.51
$347.91
SPARTAN ARMOR SYSTEMS® "SPARTAN" SHOOTERS CUT PLATE CARRIER
Product Overview
The Spartan Armor Systems® "Spartan" Plate Carrier is true to its name: sleek, minimalist, and highly capable on the battlefield. Designed to be lightweight, agile, and to enable the wearer to rapidly engage, the Spartan Armor Systems® “Spartan” Shooters Cut Plate Carrier is designed for use with our shooters cut steel core armor: Spartan™ Omega™ AR500 and AR550. Adjustable from Medium to XL, this carrier fits 10”x12” shooters cut plates and will accommodate 6”x6” side plates in the cummerbund. The Spartan Shooters Cut Plate Carrier is built to last and gives you the key essential features you need without sacrificing quality. The Spartan Shooters Cut Carrier is a great entry-level carrier that offers a variety of features at an affordable price point. When the situation dictates less is more, this carrier delivers the goods where it counts.
Spartan Armor Systems® Spartan Shooters Cut Plate Carrier Specs:
Lightweight Plate Carrier That Accepts Side Plates
Designed For Spartan Armor Systems® 10” X 12” Shooters Cut Steel Core Plates
Adjustable From Medium To XL
PALS Webbing On Front And Back For Versatility And Customization
Velcro On Front And Back For Id Patch Placement
Cummerbund Is Designed To Hold 6” X 6” Side Plates Comfortably
Shoulder Pads Included
860 Denier Poly Construction
Reinforced Drag Handle
SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO
Product Overview
Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.
Protective Value Added
We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.
Battle Hardened
Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Blazing The Trail of Innovation
Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates.
Shooters Cut Plate Weight (per plate):.
10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz.
Thickness: .25″
Side Plate Weight (per plate):
6×6 approximately 2lbs 9oz (base coat)
AR550 Body Armor - Shooters Cut Specs:
Made in U.S.A.
Special Threat Tested to Level III+ Standards
Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See a Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
Predator Armor Trauma Pad - Single - 10x12
$28.80
$32,592.00
Predator Armor Trauma Pad - Single - 10x12
Predator Armor Non-Ballistic Trauma Pads are an added layer that protects you from injuries caused by back face deformation. Trauma Pads dissipate the impact energy and reduce transmitted force.
Our Trama Pads are engineered to provide comfort when wearing our body armor panels. The materials are high density and flexible-- making it able to reduce blunt force trauma by absorbing the imapct energy.
Predator Armor Trauma Pads work perfectly in tandem with our Level III and Level III+ Armor to increase comfort and reduce blunt force.
Predator Armor Tough Hook Hanger
$17.34
$17.26
Features:
Patented, multi-purpose design
Integrated, carry grip handle for easy transportation of heavy equipment
I-beam construction and impact-resistant resin makes it nearly indestructible
Over 200 lb. load capacity
Manufactured in the USA
Backed with a 100% lifetime warranty
Predator Armor Tough Hook Hanger
The Original Tough Hook Hanger is a heavy duty hanger that was specially designed to hang, hold, and carry over 200 lbs. of clothing, heavy equipment, gym equipment, scuba diving gear, camping gear, hiking gear, outdoor sports gear and even military tactical equipment such as plate carriers. Designed by a US Army Sergeant, the this Hanger was built for worry-free hanging and storage of heavy gear. Tough Hook fits the needs of individuals and companies who rely on hangers for daily use to extend the functional life of equipment, uniforms, or long-term storage items. The integrated key feature of this hanger is the built in Patented reversible carry handle.
Features:
Patented, multi-purpose design
Integrated, carry grip handle for easy transportation of heavy equipment
I-beam construction and impact-resistant resin makes it nearly indestructible
Over 200 lb. load capacity
Manufactured in the USA
Backed with a 100% lifetime warranty
Tough Hook’s Original Tough Hook hangers are able to hold over to 200 Lbs of whatever you want, thanks to its patented I-beam construction and impact-resistant resin which makes it nearly indestructible. There is nothing tougher than Tough Hook®
Predator Armor Utility Pouch
$36.00
$40.74
Features:
1000D Cordura Construction
Minimal Space Requirement (6.5" x 3" x 5")
Pocket Sleeve for item separation
MOLLE and Belt compatible
Predator Armor Utility Pouch
100% made in the USA -- the Utility Pouch can be used to house any of your tactical gear needs. At approximately 6.5" x 3" x 5" and 3.4 oz in weight- this pouch takes up minimal space while giving you a perfect pouch to carry any general items needed.
Made from 1000D cordura it is built to last. Laser cut MOLLE on the back allows attachment to your MOLLE/PALS system. It is also belt compatible so you can attach if you do not have a MOLLE/PALS set up. Tactical zipper accross the top allows for easy open and closing to secure your gear inside.
Features:
1000D Cordura Construction
Minimal Space Requirement (6.5" x 3" x 5")
Pocket Sleeve for item separation
MOLLE and Belt compatible
Made in the USA
Predator Armor Dump Pouch
$36.00
$40.74
Features:
1000D Cordura construction
Minimal space required (3"x3"x2")
Large enough for 9 AR mags
MOLLE and belt compatible
Predator Armor Dump Pouch
If you need a place for your spent mags or other items then the folding dump pouch is perfect for your needs. It folds up to so it does not consume valuable MOLLE channels or belt space. At approximately 3" x 3" x 2" it will take up minimal space. When unrolled it is large enough to hold 9 AR mags or similar sized items.
Made from 1000D cordura it is built to last. Laser cut MOLLE on the back allows attachment with your MOLLE/PALS system. It is also belt compatible so you can attach if you don't have a MOLLE/PALS set up. Bungee cord lock at top for closure, securing your gear inside.
Features:
1000D Cordura construction
Minimal space required (3"x3"x2")
Large enough for 9 AR mags
MOLLE and belt compatible
Made in the USA.
Predator Armor Level III+ Shooters Cut
from $100.02
$101.85
Features:
Dimensions: 10” x 12” shooter cut
Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor
Single Curve
Stab and Slash Resistant
Kevlar lined to protect against spall and frag (optional)
Durable and water resistant coating on plate
Maintenance Free
Thickness .25”
Designed to be used as a front or back plate
Lightweight
Approximate Weight: 7.5 lb’s
100% Made in the USA
Predator Armor Level III+ Shooters Cut
Predator Armor Level III+ Body Armor is manufactured in the U.S. using ballistic grade steel and has the option for a kevlar lined spall and fragmentation protective layer. Our plates use a unique heat-treating, quenching and tempering process that results in an extra hardened steel. Predator Armor plates are lightweight, impact-resistant steel that hold superior ballistic properties. This allows us to use thinner plates without sacrificing protection levels.
All of our plates come with a base coat that aesthetically enhances the plate as well as provides durable characteristics. This coating does not provide fragmentation mitigation. You have the option to add kevlar lining to your plate. This provides anti spall and frag characteristics. It also enhances the performance of your plate. If your carrier does not have anti frag characteristics it is strongly advised to include the kevlar lining.
Features:
Dimensions: 10” x 12” shooter cut
Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor
Single Curve
Stab and Slash Resistant
Kevlar lined to protect against spall and frag (optional)
Durable and water resistant coating on plate
Maintenance Free
Thickness .25”
Designed to be used as a front or back plate
Lightweight
Approximate Weight: 7.5 lb’s
100% Made in the USA
Shellback Tactical ID Placard - SWAT
$7.33
$11.19
Shellback Tactical 1 x 5 Inch ID Placard with Hook Back
The Shellback Tactical 1 x 5 Inch ID Placard with hook back allows you to easily display your agency or unit information for positive ID. These patches all come with hook backing to quickly attached to loop on plate carriers, hats, bags and more! The 1 x 5 inch design is the common size for nametapes and leaves room for you to add additional patches to your gear.
Shellback Tactical 1 x 5 Inch ID Placard Features
Water and fade resistant
Hook backing
1 x 5 Inches
Heat fused block text
Fits all Shellback Tactical plate carriers and bags
Constructed of 500 denier Cordura fabric
CUSTOMER MUST SEND A COPY OF A DEPARTMENT ISSUED OR MILITARY ID IF PURCHASING THE FOLLOWING PLACARDS: POLICE, SHERIFF, DEPUTY SHERIFF, SWAT or SRT.
PLEASE SEND COPY OF ID TO CUSTOMERS@SHELLBACKTACTICAL.COM!
Shellback Tactical ID Placard - SWAT
$7.33
$12.21
Shellback Tactical 2 x 5 Inch ID Placard with Hook Back
The Shellback Tactical 2 x 5 Inch ID Placard with hook back allows you to easily display your agency or unit information for positive ID. These patches come with hook backing for easy application on to the loop of plate carriers, bags and jackets!
Shellback Tactical 2 x 5 Inch ID Placard Features
Fits perfectly on the Shellback Banshee, Banshee Elite, Patriot, Stealth and Defender Active Shooter Kit.
2 x 5 Inches
Heat fused block text
Hook backing
Constructed of 500 denier Cordura fabric
Water and fade resistant
Extremely durable
CUSTOMER MUST SEND A COPY OF A DEPARTMENT ISSUED OR MILITARY ID IF PURCHASING THE FOLLOWING PLACARDS: POLICE, SHERIFF, DEPUTY SHERIFF, SWAT or SRT.
PLEASE SEND COPY OF ID TO CUSTOMERS@SHELLBACKTACTICAL.COM!
Shellback Tactical ID Placard - SWAT
$8.00
$13.23
Shellback Tactical 3 x 7 Inch ID Placard with Hook Back
The Shellback Tactical 3 x 7 Inch ID Placard with hook back allows you to easily display your agency or unit information for positive identification. These placards all come with hook backing to fit loop on plate carrier, bags, jackets and more!
Shellback Tactical 3 x 7 Inch ID Placard Features
3 x 7 Inch
Hook backing
Constructed of 500 denier Cordura fabric
Heat fused block text
Water and fade resistant
Fits perfect on the Shellback Banshee Elite, Patriot and Defender Active Shooter Kit.
CUSTOMER MUST SEND A COPY OF A DEPARTMENT ISSUED OR MILITARY ID IF PURCHASING THE FOLLOWING PLACARDS: POLICE, SHERIFF, DEPUTY SHERIFF, SWAT or SRT.
PLEASE SEND COPY OF ID TO CUSTOMERS@SHELLBACKTACTICAL.COM!
Shellback Tactical Pen Holder Patch Set of 2
$10.66
$16.29
Shellback Tactical Pen Holder Patch - Set of 2
The Shellback Tactical Pen Holder Patch is the perfect way to add additional pen storage to your uniform, plate carrier or bag. This durable patch holds three pens and easily attaches to any loop platform. A large external Multicam loop panel allows for unit or command patches. Keep your pens organized in a convenient location and order your Shellback Tactical Pen Holder Patch today!
Specifications
Set of two
Genuine Multicam
Constructed of durable 500D nylon
Three slots for pens or pencils
Hook backing holds patch securely in place
External multicam loop to allow attachment of unit or command patches
6 inches tall by 3.5 inches wide
Lifetime warranty
Imported
Shellback Tactical Medic Pouch
from $13.32
$20.36
Shellback Tactical Medic Pouch
The Shellback Tactical Medic Pouch is designed specifically to keep all of your combat medical supplies. This pouch is fully MOLLE compatible and perfect to organize your combat gauze, compression bandages, quikclot, tourniquets and more. This pouch can be easily attached to any Shellback Tactical plate carrier, tactical bag or tactical belt. Be ready for fight, order your Shellback Tactical Medic Pouch today!
Specifications
Constructed of durable 500 denier nylon
Compatible with all MOLLE systems
Duel u-shaped zipper with 550 cord pull tabs
Elastic dividers hold medical supplies in place
Elastic loops for bandages, tourniquets, and other equipment
2 snap locking webbing straps on back for attachment to PALS webbing
Reverse stitching and bar tacking sewing for enhanced durability
Medical supplies not included
Lifetime warranty
Imported
Dimensions 7"T x 5"W x 2.5"D
Weight - 6 oz
Shellback Tactical Flashlight Pouch
from $9.32
$14.25
Shellback Tactical Flashlight Pouch
The Shellback Tactical Flashlight Pouch is designed to fit most tactical flashlights from the best brands such as Surefire, Streamlight and 5.11. Highly modular, this pouch can be attached to plate carriers, battle belts and tactical backpacks. Make sure you have a flashlight on your kit and order the Shellback Tactical Flashlight Pouch today!
Specifications
Constructed from durable 500 denier nylon
Compatible with all MOLLE systems
1 snap locking webbing strap on back to attach to PALS webbing
Pouch is perfect for tactical flashlights, pistol magazines and multitools
Strap ensures the light is securely cinched to the pouch for secure storage
Lifetime warranty
Imported
Dimensions - 5'T x 2"W x 1.5"D
Weight - 1 OZ
Shellback Tactical Dump Pouch
from $13.32
$20.36
Shellback Tactical Dump Pouch
The Shellback Tactical Dump Pouch is a super low profile pouch that quickly deploys by a single pull tab. This dump pouch features a dual u-shaped zipper with a one inch pull tab that releases a secondary 260 cubic inch bag to hold empty magazines. The secondary bag features a drawstring closure that secures the contents in the pouch while the pouch is secured to webbing or a belt via nylon straps with hook closure. Once your mission is complete, the secondary bag can be folded up and tucked back into the pouch for the next mission. Always have a way to carry spent mags with the Shellback Tactical Dump Pouch. Order today!
Specifications
Constructed of durable 500 denier nylon
Molle compatible
3 inch slide through belt slot
Dual u-shaped zipper with 550 cord pull tabs
1 inch nylon pull tab to quickly deploy secondary bag
260 cubic inch secondary bag to hold magazines
Secondary bag features drawstring closure to secure contents
Drain hole bottom grommet
Reverse stitching and bar tacking sewing for enhanced durability
Imported
Closed Dimensions: 5"T x 3.5"W x 1"D
Weight - 3oz
Shellback Tactical Triple Pistol Mag Pouch
from $14.66
$22.40
Shellback Tactical Triple Pistol Mag Pouch
The Shellback Tactical Triple Pistol Mag Pouch holds three pistol magazines and is secured by button snap molle webbing. This extremely durable pouch is adjustable and can comfortably hold magazines from 4 inches in height to 5.5 inches in height Perfect addition to your kit and fits well with Shellback Tactical plate carriers! Don't run out of ammo, and order your Shellback Tactical Triple Pistol Mag Pouch today!
SPECIFICATIONS
Made of heavy duty, reliable of 500 denier nylon
Holds three pistol magazines and is compatible with most service pistols
Adjustable flaps with hook closure for locked-down and secure transportation
Comfortably fits magazines from 4 inches to 5.5 inches in height
2 button snap webbing straps to attached to any PALS webbing
Fully MOLLE compatible
Lifetime warranty
Imported
Dimensions - 6"T x 5.5" W x 1.5" D
Weight - 3.2 oz
Shellback Tactical Single Stacker Open Top M4 Mag Pouch
from $10.66
$16.29
Shellback Tactical Single Stacker Open Top M4 Mag Pouch
The Shellback Tactical Single Stacker Open Top M4 Mag Pouch is an essential piece of gear for operators who need a quick, easy and secure way to carry extra magazines. The pouch is engineered to hold two 30 round M4 magazines in a single row double stacked formation. Fully Molle compatible, the small design allows you to place it on any tactical gear with PALS webbing. Open top design with bungee retention cords allows quick access to your magazines. Backed by our lifetime guarantee, you break it, we repair it or replace it free of charge. Order your Shellback Tactical Single Stacker Open Top M4 Mag Pouch today!
Specifications
Constructed of 500 denier nylon
Holds 2 M4/AR15 30 round magazines - single row double stacked
Compatible with all MOLLE systems
2 x 2 rows of PALS webbing on front of pouch
2 button snap webbing straps on back of pouch
2 adjustable bungee retention cords with pull tabs
2 bottom grommets for quick drainage
Low cut design for quick and easy reloads
Bar tacking and reverse stitching for enhanced durability
Lifetime warranty
Imported
Dimensions - 6" T x 3" W x 2.5" D
Weight - 4 OZ
Shellback Tactical Single Pistol Mag Pouch
from $9.32
$14.25
Shellback Tactical Single Pistol Mag Pouch
The Shellback Tactical Single Pistol Mag Pouch has a low profile, highly modular design that holds one pistol magazine. The elastic sides and adjustable flap allow it to fit nearly any pistol mag or even small tools and flashlight. This pouch is Molle compatible and comes with a single rear strap with snap closure for attachment to PALS webbing. Be ready for the fight, buy your Shellback Tactical Single Pistol Mag Pouch today!
Specifications
Made from 500 denier nylon
Holds 1 pistol mag that is compatible with most service pistols
Adjustable to comfortably fit magazines from 4 inches to 6 inches in height
1 button snap webbing strap on the back of pouch
1 bottom grommet for quick drainage
Fully MOLLE compatible
Low profile streamlined design for mobility
Bar tacking and reverse stitching for enhanced durability
Lifetime warranty
Imported
Dimensions - 6"T x 2.25"W x 1.5"D
Weight - 2.5 OZ
Shellback Tactical Double Stacker Open Top M4 Mag Pouch
from $15.99
$24.43
Shellback Tactical Double Stacker Open Top M4 Mag Pouch
The Shellback Tactical Double Stacker Open Top M4 Mag Pouch is the perfect modular solution to access four of your M4 magazines quickly and easily. This extremely durable pouch is constructed of lightweight 500 denier nylon. The pouch is engineered to hold four 30 round M4 magazines in a double row double stacked formation. Fully Molle compatible, this pouch features four button snap webbing straps to secure it to any plate carrier, tactical backpack or battle belt with PALS webbing. Backed by our lifetime guarantee, you break it, we repair it or replace it free of charge. Order your Shellback Tactical Double Stacker Open Top M4 Mag Pouch today!
Specifications
Constructed of 500 denier nylon
Holds 4 M4/AR15 30 round magazines - double row double stacked
Compatible with all MOLLE systems
4 x 2 rows of PALS webbing on front of pouch
4 button snap webbing straps on back of pouch
4 adjustable bungee retention cords with pull tabs
4 bottom grommets for quick drainage
Low cut design for quick and easy reloads
Bar tacking and reverse stitching for enhanced durability
Lifetime warranty
Imported
Dimensions - 6" T x 6.5" W x 2.5" D
Weight - 6 OZ
Shellback Tactical Adjustable MBITR Radio Pouch
from $15.99
$24.43
Shellback Tactical Adjustable MBITR Radio Pouch
The Shellback Tactical Adjustable MBITR Pouch is designed to fit the two most common military radios: Thales PRC-148 and Harris PRC-152 Falcon III MBITR radios. This MBITR radio pouch is designed to be worn with MBITR radio controls facing the operator and can easily attach to your kit with two self locking webbing straps. With the release of one buckle, the pouch quickly folds out and allows quick access to radio control buttons. Pouch includes an easy access flap at the bottom which allows operators to quickly change radio batteries without removing the entire radio. Stay connected and order your Shellback Tactical MBITR pouch today!
Specifications
Constructed from 500 denier nylon
Fits Thales PRC-148 MBITR Radio
Fits Harris PRC-152 Falcon III MBITR Radio
Compatible with all MOLLE systems
2 snapless self locking webbing straps on back of pouch
The access flap at the bottom of the pouch allow users to quickly change batteries without removing the radio from the pouch
Design to be worn with radio controls facing the user
Fold out design allows users to have quick access to control buttons, program indicators and digital screen.
Elastic retention band for positive control
Lifetime warranty
Imported
Dimensions - 8"T x3"W x 2.5"D
Weight - 5 oz
Shellback Tactical 6 x 8 Utility Pouch
from $13.32
$20.36
Shellback Tactical 6 x 8 Large Utility Pouch
The Shellback Tactical 6 x 8 Utility Pouch is a multipurpose all-weather pouch that can easily store a variety of tactical gear. Common items stored in this pouch are compasses, paracord, small maps, map pens, small notebooks and medical supplies. This pouch is perfect for plate carriers and tactical backpacks. Be ready for the fight and order your Shellback Tactical 6 x 8 Utility Pouch today!
Specifications
Constructed of durable 500 denier nylon
Compatible with all MOLLE systems
Zippered compartment is 8 x 6 x 2 inches and features dual zipper closure
Paracord pull tabs for easy zippered closure
2 snapless self locking webbing straps on back of pouch to attach to PALS webbing
1 metal grommet on bottom of pouch for drainage
6 x 3 rows of PALS webbing on front of pouch
Lifetime warranty
Dimension - 6"T x 8"W x 2.5"D
Weight - 4 oz
Imported
Banshee Elite 3.0 Active Shooter Kit with Level IV 1155 Plates
from $669.99
$916.64
Shellback Tactical Banshee Elite 3.0 Active Shooter Kit with Level IV 1155 Plates
Kit Components
Shellback Tactical Banshee Elite 3.0 Plate Carrier x 1
Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2
Banshee Elite 3.0 Plate Carrier Features
Laser cut Molle platform on front, rear and cummerbund reduces weight and adds durability
Two quick release cummerbund buckles to quickly don and doff plate carrier
Rear drag handle extends up to 34 inches in length
Constructed of durable 500 denier Cordura nylon
Plate pockets load from the bottom hold 10 x 12 shooter or SAPI cut plates
Two Shoulder buckles allow quick adjustments to raise or lower plate carrier for the perfect fit
3D Spacer mesh padding on front, rear and shoulder pads for ventilation and comfort
Cummerbund features 6 integrated M4 magazine pockets
Cummerbund features 2 pockets to insert Banshee Elite 3.0 soft armor panels
Cummerbund features interior laser cut Molle panels to attach side armor plate pockets
Front zipper admin pouch for small field gear such as notepads, pens and multitools
Rear hydration pocket holds 2L hydration bladder
Integrated nylon vertical strips to accommodate QASM buckles for chest rigs
Loop panels on front and rear for ID placards
Lifetime warranty
Made in the USA
Berry Compliant
Banshee Elite 3.0 Sizing
Plate pockets load from the bottom and accept up to 10 x 12 shooter or SAPI cut plates
2 Shoulder buckles allow for quick adjustment to raise or lower plate carrier for the perfect fit
Cummerbund comes in 2 sizes
Small/Medium - 32 inches to 39 inches
Large/XLarge - 39 inches to 46 inches
How to Select a Size
Measure the circumference of your body where the bottom of your plate would sit on your torso
Take the measurement and add 2 inches to get your final measurement
Use your final measurement to select from the sizing chart above
Level IV 1155 Plate Features
NIJ level IV threat protection
NIJ 0101.06 certified and listed on NIJ CPL list
Multi-Hit Rated
Single Curve
10" x 12" SAPI cut
Weight - 8.2lbs
Stand alone protection
600 denier Cordura nylon exterior cover
Constructed of ceramic face with composite backing
Made in the USA
10 Year warranty
Stopping Power
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
M855/SS109
7.62x54R API
7.62x63 M2AP
Elite Survival Systems Butt Stock Mag Pouches
$29.95
$40.69
Buttstock mag pouch attaches to fixed or collapsible stock rifles. Buttstock magazine holder is constructed of 1000 denier nylon Heavy-duty elastic straps with velcro closure Elastic cord retention provides immediate access to rifle stock pouch magazine Tactical buttstock shell holder available in Black and Coyote
Elite Survival Systems Velcro Attach Speed Strip, Shotgun Shells
$14.95
$25.41
Velcro shotshell carrier reload strips come in two styles to hold rifle cartridges or shotshells. Tactical shotshell holders available in black, olive drab, coyote tan, or MultiCam.
Elite Survival Systems Butt Stock Bullet Holders
$27.95
$38.65
Attach this buttstock ammo carrier to either side of your rifle or shotgun for maximum versatility. This butt stock bullet holder includes a Velcro reload strip which secures with hook and loop for tactical reloading.
Constructed of heavy-duty nylon webbing and elastic
Removable ammo strip holds 10 rifle cartridges or 6 shotshells
Additional ammo reload strips can be purchased separately here.
Available in Black and Coyote
Rifle cartridge carrier made in the USA
Elite Survival Systems Butt Stock Cartridge Holders
$14.95
$25.41
Attach this buttstock ammo carrier to either side of your rifle or shotgun for maximum versatility. This butt stock bullet holder includes a Velcro reload strip which secures with hook and loop for tactical reloading.
Constructed of heavy-duty nylon webbing and elastic
Removable ammo strip holds 10 rifle cartridges or 6 shotshells
Additional ammo reload strips can be purchased separately here.
Available in Black and Coyote
Rifle cartridge carrier made in the USA
Elite Survival Systems Flashlight Pouches w/Velcro
$15.95
$26.43
The #HL130 is a 1000 dernier nylon flashlight pouch with a Velcro closure. The velcro hook backing of this MOLLE flashlight holder is designed to attach to velcro loop panels on our bags and cases.This tactical flashlight holster for duty belts is designed to hold Surefire 6P and similar small lights.
Velcro flashlight holder made in the USA.
Elite Survival Systems Magazine Pouches/Knife Pouches
$14.90
$23.11
Product Info for Elite Survival Systems Magazine Pouches/Knife Pouches w/Velcro AttachElite Survival Systems makes hard-charging holsters , belts , holster accessories , pouches and other law enforcement equipment that is designed for soldiers and police officers on duty. ESS built its reputation for durable, high-performance tactical gear by providing innovative, top quality leather holsters and other duty gear. From concealed gun holster styles like shoulder holsters and ankle holsters, to military and police equipment like handcuff cases and magazine pouches, the Elite Survival Systems design team has created the finest duty holsters and tactical equipment in the industry. The skilled craftspeople at ESS have been making law enforcement gear and military gear for the Police, Government, and Military fields. Pistol holsters, tactical belts and pouches from Elite Survival Systems have been placed in military and law enforcement service on every continent. Count on ESS to deliver the durable police gear and tactical holsters you need to get the job done right.
The Magazine Pouch/Knife Pouch #HL110 is constructed of 1000 denier nylon with velcro closure. Velcro hook backing is designed to attach to velcro loop panels in Elite bags and cases. Elite Survival Systems Magazine Pouch/Knife Pouch designed to hold one pistol magazine or folding pocket knife.
Specifications for Elite Survival Systems Magazine Pouches/Knife Pouches w/Velcro Attach:Color: BlackFabric/Material: 1000 Denier NylonHand: AmbidextrousConcealable: YesAttachment/Mount Type: RingAccessory Attachment System: RingFastener/Closure Type: VelcroPackage Contents:Elite Survival Systems Magazine Pouches/Knife Pouches w/Velcro Attach
Elite Survival Systems Velcro Attach Magazine Pouches
$36.95
$47.82
The velcro attaching magazine pouches are constructed of heavy-duty durable fabric with velcro closure. See the chart below for triple mag pouch options and configurations. The 223/308 mag pouch has a hook backing and is designed to attach to velcro loop panels in our bags and cases. Each velcro backed magazine pouch also includes "D" rings for attaching a shoulder strap.3-magazine holder made in the USA
Size
Holds
HL103
Three .223 pouches(two in each pouch, holds 6 total) orThree .308 pouches (one in each pouch, holds 3 total) $36.95
HL104
HL105
Three AK47/7.62x39 magazines $36.95
HL106
Two 50rd 5.7 magazines $36.95
HL107
HL109
Three pistol caliber extended/stick magazines$36.95
Elite Survival Systems Flashlight Pouches
$16.99
$27.49
Product Info for Elite Survival Systems Flashlight PouchesElite Survival Systems makes hard-charging holsters , belts , holster accessories , pouches and other law enforcement equipment that is designed for soldiers and police officers on duty. ESS built its reputation for durable, high-performance tactical gear by providing innovative, top quality leather holsters and other duty gear. From concealed gun holster styles like shoulder holsters and ankle holsters, to military and police equipment like handcuff cases and magazine pouches, the Elite Survival Systems design team has created the finest duty holsters and tactical equipment in the industry. The skilled craftspeople at ESS have been making law enforcement gear and military gear for the Police, Government, and Military fields. Pistol holsters, tactical belts and pouches from Elite Survival Systems have been placed in military and law enforcement service on every continent. Count on ESS to deliver the durable police gear and tactical holsters you need to get the job done right.
This pouch is constructed of heavy-duty nylon webbing with velcro closure. MSK-L Fits AA mini flashlights, FH6P Fits Surefire 6P flashlights.
Specifications for Elite Survival Systems Flashlight Pouches:Color: BlackFastener/Closure Type: VelcroFabric/Material: Heavy-Duty Nylon WebbingBelt Width: 2.25 inFeatures of Elite Survival Systems Flashlight Pouch:Constructed of heavy-duty nylon webbingVelcro closureFits belts up to 2.25" wideCompatible with M/ASH shoulder holster systemmade in specialized factoriesPackage Contents:Elite Survival Systems Flashlight Pouches
Elite Survival Systems Single/Double Speedloader Pouches
from $9.30
$19.30
Product Info for Elite Survival Systems Single/Double Speedloader PouchesKeep a speedloader or two on your belt with this built-to-last concealed carry speedloader pouch by Elite Survival Systems. Constructed of 1000 denier nylon. Velcro enclosure. Speedloader carrier fits belts up to 2.25" wide. Speedloader pouch is available in single or double compartment versions.
Specifications for Elite Survival Systems Single/Double Speedloader Pouches:Belt Width: 2.25 inAttachment/Mount Type: Belt Loop/SlotAccessory Attachment System: Belt SlotColor: BlackFastener/Closure Type: VelcroFabric/Material: 1000D NylonPackage Contents:Elite Survival Systems Single/Double Speedloader Pouches
Elite Survival Systems Handcuff Pouches
$19.95
$30.50
Elite handcuff pouch holds one pair of standard or link cuffs on the belt. * Constructed of 1000 denier nylon * Velcro closure * Fits belts up to 2.25" wideNylon cuff case made in the USA
Elite Survival Systems Belt Mag Holders
from $28.95
$39.67
The MOLLE Mag Pouch M4 holds two .223 or one .308 mag in one pouch. This rifle magazine holder is available in black, coyote tan, and multicam. Made in the USA. The rifle mag pouch attaches to any MOLLE compatible vest, pack, etc. Rifle magazine pouch is constructed of CORDURA® 500D nylon for maximum durability. The flap of this MOLLE single mag holder has a Velcro closure and glove-friendly tabs.
Elite Survival Systems Belt Keepers
$14.90
$23.37
Specifications for Elite Survival Systems Belt Keepers:
Fastener/Closure Type: Snap Color: Black Fabric/Material: Nylon Quantity: 4 Package Contents: Elite Survival Systems Belt Keepers Similar Products to Elite Survival Systems Belt Keepers
Elite Survival Systems Belt Keepers
Nylon belt keepers come in sets of 4, and are available to fit 2 inch or 2.25" belts. Duty belt keepers attach with dual snap closures.
Made in the USA.
Elite Survival Systems DuraTek Molded Glove Pouches
$18.95
$29.49
Tactical glove pouch constructed of padded Ballistic nylon for durability
Molded & form-fitted MOLLE latex glove pouch design
Snap closure
Nylon glove pouch holds two pairs of latex gloves in two compartments
Duty belt glove pouch fits belts up to 2.25" wide
Elite Survival Systems Dura-Tek Silent Key Pouches
$12.95
$23.37
Key silencer constructed of molded Ballistic nylon
Key case holds keys securely and silently
Includes key ring
Hook & loop closure
Silent key holder fits duty belts up to 2.25" wide
Elite Survival Systems Dura-Tek Baton Pouches
from $18.95
$29.49
Baton pouch is constructed of padded ballistic nylon for durability
Molded & form-fitted design
Available to fit 16"-26" batons
Nightstick holder fits belts up to 2.25" wide
Elite Survival Systems DuraTek Molded Open Top Cuff Pouches
$21.95
$32.54
Open top handcuff pouch design for quick access to cuffs
Constructed of padded Ballistic nylon for durability
Molded & form-fitted design
Snap closure
Handcuff case for duty belt holds one pair standard or linked cuffs
Nylon handcuff case fits belts up to 2.25" wide
Elite Survival Systems Dura-Tek Handcuff Pouches
from $21.95
$32.54
Open top handcuff pouch design for quick access to cuffs
Constructed of padded Ballistic nylon for durability
Molded & form-fitted design
Snap closure
Handcuff case for duty belt holds one pair standard or linked cuffs
Nylon handcuff case fits belts up to 2.25" wide
Elite Survival Systems Dura-Tek Mace Pouches MV170-B Fastener/Closure
$21.95
$32.54
Mace case constructed of padded Ballistic nylon for durability
Molded & form-fitted design
Snap closure
Pepper spray pouch holds 1 can MK-III or MK-IV style mace
Fits belts up to 2.25" wide
#MV170 (MK-IV large mace)
Elite Survival Systems DuraTek Dual Flashlight Rings MV421-B Belt Loop/Snap
$11.95
$22.36
Constructed of 1" nylon webbing
Dual flashlight belt rings fit most medium or large lights
Nylon belt holder fits law enforcement and military belts up to 2.25" wide
Flashlight Ring #MV421
Elite Survival Systems Dura-Tek Glove or M3/M6 Light Pouches
$19.95
$30.50
Small tactical belt pouch constructed of padded Ballistic nylon for durability Molded & form-fitted design Snap closure Holds latex gloves or M3/M6 and similar rail mounted lights M3/M6 light or glove pouch for duty belts up to 2.25" wide
Elite Survival Systems Dura-Tek Speedloader Pouches
$21.95
$32.54
Concealed carry speedloader pouch is constructed of padded Ballistic nylon for durability Molded & form-fitted design Snap closure Speedloader pouch holds 2 38/357 Concealable speedloader pouch fits belts up to 2.25" wide
Elite Survival Systems Dura-Tek Double Magazine Pouches
from $27.97
$35.60
his nylon mag pouch is padded and molded for a form-fitted design. This double stack mag pouch has a dual loop system for vertical or horizontal carry. This nylon magazine pouch has flaps with dual snap closure for height adjustment which allows for a better fit with magazines of various size. This double stack magazine pouch holds full-size, double column magazines. Available as a Single Pouch for one magazine or a Double Pouch for two magazines. Fits 2" or 2.25" belts.
Elite Survival Systems 1.5in Pants Inner Belts
$19.95
$30.50
Specifications for Elite Survival Systems 1.5in Pants Inner Belts:
Color: Black Finish: Web General Application: Tactical Application: Duty Belt Width: 1.5 in Gender: Unisex Activity/Occasion: Duty Fabric/Material: Nylon Fastener/Closure Type: Velcro Belt Style: Duty Belt Age Group: Adults Features of Elite Survival Systems Dura Tek Pants Belt: Constructed of padded Ballistic nylon for durability Has 1.5in width Package Contents: Elite Survival Systems 1.5in Pants Inner Belts
Elite Survival Systems 1.5in Pants Inner Belts
This tactical velcro inner belt is lined with hooks to mate with Elite duty belts. This inner duty belt is constructed of 1.5" nylon webbing and closes with velcro. Order this velcro under belt today!
Size
Fits
XS
20"-24" waist
SM
26"-30" waist
M
32"-36" waist
L
38"-42" waist
XL
44"-48" waist
XXL
50"-54" waist
Elite Survival Systems 2.25in Dura-Tek Molded Duty Belts
$39.95
$50.87
Specifications for Elite Survival Systems Dura-Tek Molded Duty Belt:Size WaistS: 28"-32"M: 34"-38"L: 40"-44"XL: 46"-50"Specifications for Elite Survival Systems 2.25in Dura-Tek Molded Duty Belts:Color: BlackFinish: BallisticGeneral Application: TacticalApplication: DutyBelt Width: 2.25 inGender: UnisexActivity/Occasion: DutyFabric/Material: 1050 Ballistic NylonAdjustability: AdjustableFastener/Closure Type: BuckleBelt Style: Duty BeltAge Group: Adults
S: 28"-32"M: 34"-38"L: 40"-44"XL: 46"-50"
Elite Survival Systems 2.25in Dura-Tek Molded Duty Belts
The Dura-Tek Molded Duty Belt is constructed of 1050 Ballistic nylon with internal foam padding and internal stiffeners for maximum comfort and function. The belt is lined with velcro loop for use with our molded inner pant belt. This ballistic nylon belt closes with a 3 point CopLok locking buckle. The edges of the belt are bound for both appearance and durability. Both ends of the black duty belt offer Velcro adjustment for size. This black nylon duty belt is available in 4 sizes: S, M, L, XL S: 28"-32" M: 34"-38" L: 40"-44" XL: 46"-50"