All

Elite Survival System Single A/R Magazine Pouches MOLLE The MOLLE Mag Pouch M4 holds two .223 or one .308 mag in one pouch. This rifle magazine holder is available in black, coyote tan, and multicam. Made in the USA. The rifle mag pouch attaches to any MOLLE compatible vest, pack, etc. Rifle magazine pouch is constructed of CORDURA® 500D nylon for maximum durability. The flap of this MOLLE single mag holder has a Velcro closure and glove-friendly tabs.

Product Description The tactical single point bungee sling with two bungee sections provides a stretch to help improve comfort & minimize bounce. Single point tactical sling constructed of heavy-duty nylon webbing and bungee cord Heavy-duty interlocking attachment ring with elastic cover Heavy-duty quick-release buckle for quick disconnect Fully adjustable single point sling bungee Available in Black and Coyote This one point bungee sling is proudly made in the USA.

1000 denier nylon flashlight holder with Velcro closure. Fits Surefire 6P and similar lights.Available in black, coyote tan, multicam, and wolf gray. Designed to fit MOLLE compatible modular equipment, including our vests and packs.Made in the USA

The MOLLE 40mm triple grenade pouch is constructed of 1000 denier nylon with Velcro & snap closures. Fits 40mm grenades. Available in black, coyote tan, and multicam. This MOLLE attachment is designed to fit compatible modular equipment, including our vests and packs. Made in the USA

Product Description The QTS Sling is a fully-adjustable three point sling with multiple adjustments which allow the user to position their rifle where they want it while easily getting weapon to ready position. These tactical slings for AR-15, M-4 & M-16 are constructed of 1.25" heavy-duty nylon webbing with heavy-duty hardware. Now includes heavy-duty quick-release buckle for fast disconnect. This quick release sling is available in three sizes:QTS01 - Fits M-16/AR-15 with fixed stockQTS02 - Fits M-16/AR-15 with collapsible stockQTS03 - Fits M-4 collapsible stock

Fits two (2) sealed Narcan spray doses + gloves Built-in MOLLE straps provide duty belt attachment stability for the Narcan and glove holder with added convenience 1000 denier nylon construction Heavy-duty snaps and hardware Compatible with any MOLLE/PALS modular system Available in Black, Coyote Tan, Wolf Gray, and Multicam Duty belt glove holder made in the USA

Elite Survival System MOLLE Medical Utility Pouches The medical utility pouch is constructed of 1000 denier nylon with heavy-duty zippers. Internal loops for keeping contents secure. Available in black, coyote tan, and multicam. This MOLLE first aid pouch is designed to fit MOLLE compatible modular equipment, including our vests and packs. DIMS: 7.5" x 5" x 1.5" This tactical medical pouch is made in the USA

Constructed of 1000 denier nylon with nylon cord and Velcro closure, the MOLLE Radio Holder has an elastic compression strap that holds radios in place. This duty belt radio holder is available in black, coyote tan, and multicam. This walkie talkie holster is designed to fit MOLLE compatible modular equipment, including our vests and packs. Walkie talkie belt holster made in the USA.

This concealed handcuff case is designed to fit MOLLE compatible modular equipment, and fits one pair of standard link cuffs. Buy this MOLLE handcuff pouch today! • Constructed of 1000 denier nylon • Velcro closure • Available in black and coyote tan • MOLLE handcuff case made in the USA

This mace holder is a MOLLE gear attachment constructed of 1000 denier nylon with a Velcro closure. Fits one can MK-IV mace. This mace holder and other MOLLE vest accessories are designed to fit compatible modular equipment.Our tactical vest accessories are made in the USA.

Product Description This MOLLE flashbang pouch is constructed of 1000 denier nylon with velcro, quick-release buckle & snap closures. The flashbang holder fits one smoke grenade or distraction device. Available in black, coyote tan, or multicam, this smoke grenade holder is designed to fit tactical MOLLE gear like our vests and packs. MOLLE flashbang pouch made in the USA

1000 denier nylon construction Three shell strips hold 6 rounds each, 18 total Heavy-duty #9 zipper with quiet zipper cords Quick-rip tab of the MOLLE shotshell carrier opens zipper in an instant Dual MOLLE stick attachment Tactical shotgun shotshell pouch available in Black, Coyote Tan, Olive Drab and Multicam Shotshell bags proudly made in the USA Elite Survival System MOLLE Shotgun Shell Pouches This MOLLE compatible shot shell pouch provides quick access to removable ammo strips. Add this MOLLE shot shell holder to your tactical toolkit today.  1000 denier nylon construction Three shell strips hold 6 rounds each, 18 total Heavy-duty #9 zipper with quiet zipper cords Quick-rip tab of the MOLLE shotshell carrier opens zipper in an instant Dual MOLLE stick attachment Tactical shotgun shotshell pouch available in Black, Coyote Tan, Olive Drab and Multicam Shotshell bags proudly made in the USA

This MOLLE pistol mag pouch is constructed of CORDURA® 500D nylon with velcro closure. Fits 9mm/40/45 caliber magazines.Double magazine holder available in black, coyote tan, wolf gray, and multicam. This double mag pouch fits tactical MOLLE gear like our vests and packs. MOLLE double magazine pouch made in the USA

This MOLLE single pistol mag pouch is constructed of 1000 denier nylon with a Velcro closure. Fits 9mm/40/45 caliber magazines. The single magazine holder is available in black, coyote tan, and multicam. This pistol magazine storage pouch is designed to fit MOLLE compatible modular equipment, including our vests and packs. Made in the USA

1.25" heavy-duty nylon MOLLE weapon slings are constructed with heavy-duty hardware. MACS - Submachine gun sling with metal snaphook at both ends

The H&K Tactical Rifle Gun Sling is constructed of 1.25" heavy-duty nylon with heavy-duty hardware. The tactical sling attaches with a heavy-duty plastic slide on one end, and metal snaphook on the opposite end. Made in the USA.

This 1.25" heavy-duty nylon gun slings is constructed with heavy-duty webbing and hardware.ARSB - Universal M-16 style tactical sling with adjustment slide at both ends

Product Description Our padded slings are available in two styles to fit most standard rifles and shotguns.The Padded Tactical Shotgun Sling has 10 elastic loops for shotshells.The Padded Rifle Sling has four elastic loops for cartridges and other combat accessories. 1000 denier nylon construction 1/4" closed cell foam padding Non-slip backing Designed for 1.25" swivels, fully adjustable Padded rifle and combat shotgun slings come in black only

Product Description • 2 point adjustable tactical sling constructed of 1.25” heavy-duty nylon webbing • Quick adjust sling disconnect at both ends • Pull tab for quick & easy adjustment when in position • Fully adjustable 2 point tactical sling • 2 point adjustable tactical sling constructed of 1.25” heavy-duty nylon webbing • Quick adjust sling disconnect at both ends • Pull tab for quick & easy adjustment when in position • Fully adjustable 2 point tactical sling

Product DescriptionQuickly adjust positions with this simple and efficient two point tactical sling. This padded version of our standard Rapid-Tac sling has a 2" wide padded section at the neck area. Add this quick adjust 2 point padded sling to your tactical arsenal online today. 2 point padded sling is constructed of 1” nylon webbing, heavy-duty hardware 2 inch wide padded area at neck Adjustable slides at both ends Pull tabs and friction release buckle provide instant adjustment Padded gun sling proudly made in the USA Black only

Product Description Quickly adjust positions with this simple and efficient 2 point tactical sling. Add this quick adjust 2 point sling to your tactical arsenal online today. 2-point sling is constructed of 1” nylon webbing, heavy-duty hardware Adjustable slides at both ends Pull tabs and friction release buckle provide instant adjustment Proudly made in the USA

Three-point slings help stabilize your weapon while firing and ease the fatigue of weapon carry for prolonged periods. Equipped with stainless steel HK hook hardware, these tactical straps attach and detach to popular submachine guns with ease. Heavy duty nylon webbing, hardware, and construction Extremely stable and comfortable 3 point sling carry Includes HK hook a hardware, compatible with a wide array of weapons Minimizes fatigue Quick-release buckle for easy on/off Fully adjustable 3-point tactical sling is proudly made in the USA HK Hook Hardware

The belt magazine pouch is designed to hold two P90/PS90 magazines. * Constructed of 1000 denier nylon * Dual flaps over pouches with velcro closures * Belt loops fit belts up to 2.25" wide * Drain holes to prevent moisture build-up * Black only Our nylon magazine pouches are proudly made in the USA.

Special Features: Ideal for vulnerable professions standard equipment A unique patented “foldable” shield with a combination of light weight, mobility and a non-provoking protection. It provides less space while folded. In your vehicle Carried in a holster Carried on the arm (folded)  2 free hands available Making it difficult to grab a hold of Can be tilted if necessary Spartan Armor Systems SaintPro Ballistic Shield Level IIIA Special Features: Ideal for vulnerable professions standard equipment A unique patented “foldable” shield with a combination of light weight, mobility and a non-provoking protection. It provides less space while folded. In your vehicle Carried in a holster Carried on the arm (folded)  2 free hands available Making it difficult to grab a hold of Can be tilted if necessary

The Target Man™ Dueling Tree Target Kit with AR550 Paddles (Complete and ready to go)We’ve added pre-built dueling tree target kits to our site.The Dueling Tree is a fun and challenging reactive target system designed to increase the response time of shooters under pressure. Grab your buddy and see who can knock all the paddles to the opponents side first! First person with all the paddles on their opponents side wins the game. This target system brings hours of fun to all shooters, regardless of skill level. The AR550 Dueling Tree Target Kit is designed to provide the shooter with extreme wear resistance due to its extreme high hardness. With a 10% increase in hardness, our AR550 Dueling Tree Target Kit is sure to provide you with a lifetime of fun! Though we still rate them to withstand the same abuse as our AR500 Dueling Tree Target Kits, the added hardness provides a little extra “insurance” against and early target fatigue and a definite increase in life expectancy. Please note the angle iron ships separately. You’ll receive 2 packages…. the first package will have the targets (and optional multi-purpose base) and the second package, which will be the angle iron with the pre-welded pivot tubes) will come in a shipping tube via UPS ground.All you have to do is select your AR550 kit size (4 paddle kit, 6 paddle kit, or 8 paddle kit) and we’ll do the rest of the work for you. Your angle iron will come with pre-welded 1.5″ x .25″ heavy-duty DOM pivot tubes.Decide if you want to add .22 paddles. The .22 paddles are for use with inexpensive .22 ammo ONLY. If you’re not shooting .22, don’t buy them.If you do not already own one of our patent-pending multi-purpose bases (MPB), you can add it as an option. The MPB can be used with any of our reactive target systems, obviously including the dueling tree. If you already have an MPB, do not purchase the base unless you’re looking to have a stand-alone dueling tree. Constructed from 3/8″ AR500, these paddles can take some severe abuse! Shoot with any pistol/magnum round from any safe distance! Shoot with high-caliber (lead only) center-fire weapons traveling 3200 FPS (or ANY pistol from any SAFE distance) or less from 100 yards. We have sold thousands of these kits and everyone loves how easy this tree is to build!   Angle iron measurements: 4 paddle tree- 46" 6 paddle tree- 66" 8 paddle tree- 84" NEW:The TTM “challenge tree” provides the shooter with a more challenging, smaller reactive paddle platform. If interested, you can now purchase optional 4″ challenge tree paddles as part of this kit. It literally takes just seconds to swap paddles. So, if you’re like Cory and Erika (from Range Time Tactical Shooting) and you’re looking for an even tougher challenge, please be sure to add our 4″ “challenge tree” paddles to your selection! ** Note, you will receive AR500 Challenge Tree Paddles if you select this option See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ “Heads Up” AR500 Reactive Steel Shooting Target   This set up comes pre-welded. “Heads Up” is a reactive target system constructed from ballistic grade AR500. Heads Up doubles as a pertinent target head shot and gut shot target aid…. both of which are essential impact points for self defense. Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”.“Heads Up” is available with and without our patent-pending Multi-Purpose Base (MPB) and .22 Mild Steel Paddle.  Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ “Snipers Paradise” – AR500 Reactive Steel Shooting Target ** This version of our target comes pre-welded with a throat. You will need a base and angle iron to use the target. ***“Snipers Paradise” (named by FaceBook fan Alex A!!) is a 3-stage reactive target system constructed from ballistic grade AR500. This three way target system is perfect for someone to enhance their tactical shooting skills. Here you have a head shot, hostage target, and center mass shot all in one! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”.This kit is available with or without our patent-pending Multi-Purpose Base (MPB) and .22 Mild Steel Paddles. You can also purchase this kit un-welded in our DIY Shooting Targets section. Our setup is designed to be used with 46" angle iron with the dimensions of 1.5″x.25″. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally. Target Specifications….. Target height: 21.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ Target comes unpainted. We recommend using 46" angle iron for his target. This is basically a 2/3 scale IPSC  See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ Head Shot Gut Shot (HSGS) – AR500 Reactive Steel Shooting TargetHead Shot Gut Shot (HSGS)!! 4-stage reactive target system constructed from ballistic grade AR500. This four way target system is perfect for someone to enhance their tactical shooting skills. Here you have a head shot, gut shot, center mass shot, and a tactical “slap paddle” (to reset the center mass target)! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”.This kit is available in a few different configurations for all budget levels. This kit is pre-welded and you have the option to purchase it  with and without the our patent-pending Multi-Purpose Base (MPB) and you can also purchase this kit un-welded in our DIY Steel Target section. Save some decent coin by purchasing the un-welded kit and fab up your own base. If you’re purchasing the kit un-welded, don’t worry as assembly is as easy as 1-2-3. (1) Assemble slotted “throat” (aka target holding fixture) like a puzzle using the slotted/tabbed pieces. Ensure all pieces are “square”. (2) Tack the kit in to position with your welder. (3) Start welding!Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally. Target Specifications….. Target height: 19.5″ (with head in up position) Target width: 12″ Target comes unpainted. We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Specifications Stand -Alone Armor System 10” X 12” 3.5 lbs/plate (10”x12”) Ultra High Molecular Weight Polyethylene (UHMWPE) Hybrid Fibers Neutrally buoyant Multi-Shot Rated 1.2” profile Our Proprietary “Encapsaloc” Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Raised and Embedded 3D Spartan Armor Systems® Logo Made in U.S.A. SPARTAN ARMOR SYSTEMS® LEVEL III ELAPHROS SET OF TWO Spartan Armor Systems® Introduces our advanced “Elaphros” (Ultra Light Weight) Level III, Multi-curve, UHMWPE Body Armor. At only 3.5 lbs per plate, this Body Armor is for those that require rifle-rated protection over extended distances without being weighed down. Elaphros lightweight body armor offers NIJ Level III (certified) threat protection at approximately half the weight of most comparable body armor plates. Elaphros body armor is neutrally buoyant and so light that it floats in water! Light, Quick, Agile “Elaphros'' in greek translates to light, quick, agile, and easy to bear. Designed for the operator that requires minimal weight and maximum maneuverability, Eleaphros body armor allows the operator a distinct advantage in a wide range of tactical engagements. Elaphros body armor is NIJ certified to meet or exceed level III requirements under NIJ 0101.06.   Master Crafted, Laboratory Tested Spartan Armor Systems® Elaphros Body Armor Plates are lab tested and certified to meet or exceed ballistic resistance under NIJ-0101.06 Level III specifications. Elaphros body armor plates offer the comfort, reliability, quality, and affordability you’ve come to expect from Spartan Armor Systems®. Constructed with Multiple ply’s of Advanced UHMWPE Hybrid Fibers, Elaphros weighs in at 3.5lbs/per plate while maintaining a sleek 1.2” low profile design that allows the operator maximum mobility and comfort with Level III protection. Our Elaphros Shooters Cut, 10”X12”, multi-curved, UHMWPE body armor was designed in-house by our dedicated team of engineers that have decades of industry experience. These UHMWPE plates were developed using only the highest quality materials, production, and quality assurance standards, providing maximum confidence and supreme coverage for our customers. Next Level Armor Elaphros (Ultra Lightweight) Level III Body Armor Plates are coated/encapsulated with Spartan Armor Systems® proprietary “Encapsaloc” Polyurea Coating. Protecting the plate from water, contaminants, and daily wear and tear. Taking great pride in every piece of armor Spartan Armor Systems® produces, the raised 3D Spartan Armor Systems® logos is a symbol of our exceptionally high-quality standards and pride. If that weren’t enough, we provide a 5-year warranty and a 5-year shelf life with our Elaphros UHMWPE Body Armor! Specifications Stand -Alone Armor System 10” X 12” 3.5 lbs/plate (10”x12”) Ultra High Molecular Weight Polyethylene (UHMWPE) Hybrid Fibers Neutrally buoyant Multi-Shot Rated 1.2” profile Our Proprietary “Encapsaloc” Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Raised and Embedded 3D Spartan Armor Systems® Logo Made in U.S.A.

Specifications: Includes 2 Plates NIJ Certified Level III 9.5"x12.5" 4.8 lbs 1.1" thick Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Ballistic Threats Tested:  7.62x39mm M67 (FMJ Ball) 7.62x39mm M43 (MSC) 7.62x51mm (M-80 Ball) 5.56x45mm (M193 Ball) 5.56x45mm (M855/SS109) Spartan Armor Systems Level III+ Composite/Ceramic Multi Curve 10"x12" Set of Two At only 4.8 lbs this is our lightest level III+ body armor plate we've ever offered. This stand-alone composite/ceramic body armor is multi-hit rated and special threat validated against high velocity rounds such as SS109/M855. The combination of multi curve design and light weight makes this armor comfortable and easy to wear for for extended periods of time. Each plate measures 9.5"x12.5" inches and is only 1.1" inches thick  Specifications: Includes 2 Plates NIJ Certified Level III 9.5"x12.5" 4.8 lbs 1.1" thick Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Ballistic Threats Tested:  7.62x39mm M67 (FMJ Ball) 7.62x39mm M43 (MSC) 7.62x51mm (M-80 Ball) 5.56x45mm (M193 Ball) 5.56x45mm (M855/SS109) Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited. The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.  

Spartan Armor Systems ® Hercules Level IV Ceramic Advanced Compound Curve Body Armor -  Set of Two Plates Product Overview The Hercules level IV body armor plate is manufactured in-house at the Spartan Armor Systems® facility in Tucson, AZ utilizing ballistic ceramic and UHMWPE materials. As with all body armor manufactured by Spartan Armor Systems®, the Hercules level IV ceramic body armor plate has been independently tested and verified by an NIJ Certified laboratory. Each Hercules level IV body armor plate is rated to stop armor piercing rifle rounds up to .30-06 M2 AP. Weighing in at just 6.9 lbs per plate, the Hercules is noticeably lighter than most level IV ceramic body armor plates available. With full edge-to-edge 10”x12” coverage and Advanced Compound Curve design, the Hercules is ideal for operators in need of maximum protection and comfort.  Full Edge-To-Edge Protection Get what you pay for! It might not be obvious, but some 10”x12” level IV ceramic body armor plates on the market only provide protection in a 8”x10” area to keep manufacturing costs low. However, the Hercules ceramic body armor plate provides full 10”x12” edge-to-edge protection for the operator. When your life is on the line, don’t take chances with other ceramic plates that measure 10”x12”, but only provide an 8”x10” area of protection. Buy ceramic level IV body armor plates that give you the protection you’re paying for.   Advanced Compound Curve - True Multi-Curve Design The Hercules level IV body armor plate features our Advanced Compound Curve (ACC). While many body armor plates claim to be “multi-curve”, the ACC profile is a true multi-curve design providing the operator with the most comfortable fit of any ceramic level IV body armor plate. This advanced ergonomic design is especially important during extended duty engagements, typical of Law Enforcement, Security, and Military operations. Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Ceramic & UHMWPE Plate Size: 10”x12” Protection Area: 10”x12” Weight: 6.9 lbs Thickness: 1.1” Plate Quantity: Two (2) Plates Included Curve Profile: Advanced Compound Curve Cut: SAPI/ESAPI (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Condura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ.   NOTE: Ceramic armor cannot be resold, therefore ALL sales for this product are final. No returns or exchanges accepted.

SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER   Product Overview The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.  Ready For Anything Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike. Spartan Armor Systems® Sentinel Plate Carrier Specs: Adjustable from 38" To 48" Chest Size Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Padded Mesh Separators For The Interior Of The Carrier For Breathability Fits 10" X 12" Shooters Cut Plates Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9” X 3” Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 2lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates. SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO   Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Shooters Cut Plate Weight (per plate):. 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. or Full Coat 8lbs 10oz. Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness   Side Plate Weight (per plate):     6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat) 6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat).   AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.        

Spartan AR550 Body Armor and Sentinel Plate Carrier Package Fits 38" to 48" chest size Durable emergency drag handle Anti-Slip shoulder padding w/ velcro Side release buckles on internal waist strap Padded mesh separators for the interior of carrier for breathability Removable cummerbund with side plate pockets for 6x6 and 6x8 side plate armor NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates! Velcro in front of the Carrier is 8x4 Velcro on the back of the Carrier is 9x3 Stronger carrier material that can withstand through wear and tear over a long period of time 1000 denier Bottom loading By purchasing you will receive: Set of Two 10x12 AR550 Body Armor Single Curve, Full Coat Set of Two AR550 Side Plates Base Coat One Sentinel Plate Carrier (your choice in color) Level III+ Side Plates:   6″ x 6″  Chest Plate Weight (per plate):   10x12 AR550 Shooters Cut Full Coat: 8lbs 10oz. Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat) Thickness:   .25″ AR550 Spartan Armor Systems AR550 Level III+ Armor NIJ Certified with Spartan Sentinel Plate Carrier Package includes both front and back AR550 shooters cut steel armor plates with a single curve, with full coat of Encapsuloc™ anti-fragmentation coating, two 6x6 side plates (base coat) and Spartan Sentinel Plate Carrier. Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection. Spartan AR550 Body Armor and Sentinel Plate Carrier Package Fits 38" to 48" chest size Durable emergency drag handle Anti-Slip shoulder padding w/ velcro Side release buckles on internal waist strap Padded mesh separators for the interior of carrier for breathability Removable cummerbund with side plate pockets for 6x6 and 6x8 side plate armor NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates! Velcro in front of the Carrier is 8x4 Velcro on the back of the Carrier is 9x3 Stronger carrier material that can withstand through wear and tear over a long period of time 1000 denier Bottom loading By purchasing you will receive: Set of Two 10x12 AR550 Body Armor Single Curve, Full Coat Set of Two AR550 Side Plates Base Coat One Sentinel Plate Carrier (your choice in color) Buy Body Armor - Level III+ Spartan AR550 Armor We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor!  With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated! Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates. Note: AR550 side plates are NIJ compliant, are not NIJ certified.  Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our  ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Level III+ Side Plates:   6″ x 6″  Chest Plate Weight (per plate):   10x12 AR550 Shooters Cut Full Coat: 8lbs 10oz. Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat) Thickness:   .25″ AR550

SPARTAN ARMOR SYSTEMS® "SPARTAN" SWIMMERS CUT PLATE CARRIER   Product Overview The Spartan Armor Systems® "Spartan" Swimmers Cut Plate Carrier is designed for use with our Swimmers Cut steel core armor: Spartan™ Omega™ AR500 and AR550. This minimalist “Spartan” carrier is designed for those seeking speed, agility, and ultimate maneuverability in their carrier. The Swimmers Cut Plate Carrier is adjustable from a Medium size to XL and can accommodate 6”x6” side plates in the cummerbund, should you desire to run it with enhanced side protection. Intended for highly active environments that require the wearer to remain nimble, this carrier is constructed of extremely durable 860 Denier poly construction, fits 10”x12” swimmers cut plates which provide coverage where you need it most, but reduces weight and allows for enhanced mobility by eliminating a small amount of plating from the shoulder regions. Don’t let the paired down design fool you though, this versatile and effective carrier affords a good degree of customization with PALS webbing on the front and back sides for the attachment of molle accessories and pouches, and velcro on front and back for patch placement and identifiers. If you’re looking for a versatile plate carrier that allows for a greater range of motion and mobility that won’t break the bank, the Spartan Swimmers Cut Plate Carrier is for you.   Spartan Armor Systems® “Spartan” Swimmers Cut Plate Carrier Specs: Lightweight Plate Carrier That Accepts Side Plates Designed For Spartan Armor Systems® 10" X 12" Swimmers Cut Steel Core Plates Adjustable From Medium To XL PALS Webbing On Front And Back For Versatility Velcro On Front And Back For Patch Placement Cummerbund Is Designed To Hold 6" X 6" Side Plates Comfortably Shoulder Pads Included 860 Denier Poly Construction Reinforced Drag Handle NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems®. We can not guarantee a fit with plates made by other manufacturers.

The Target Man™ Dueling Tree Target Kit (Complete and ready to go)We’ve added pre-built dueling tree target kits to our site.The Dueling Tree is a fun and challenging reactive target system designed to increase the response time of shooters under pressure. Grab your buddy and see who can knock all the paddles to the opponents side first! First person with all the paddles on their opponents side wins the game. This target system brings hours of fun to all shooters, regardless of skill level.Please note the angle iron ships separately. You’ll receive 2 packages…. the first package will have the targets (and optional multi-purpose base) and the second package, which will be the angle iron with the pre-welded pivot tubes) will come in a shipping tube via UPS ground.All you have to do is select your kit size (4 paddle kit, 6 paddle kit, or 8 paddle kit) and we’ll do the rest of the work for you. Your angle iron will come with pre-welded 1.5″ x .25″ heavy-duty DOM pivot tubes.Decide if you want to add .22 paddles. The .22 paddles are for use with inexpensive .22 ammo ONLY. If you’re not shooting .22, don’t buy them.If you do not already own one of our patent-pending multi-purpose bases (MPB), you can add it as an option. The MPB can be used with any of our reactive target systems, obviously including the dueling tree. If you already have an MPB, do not purchase the base unless you’re looking to have a stand-alone dueling tree. Constructed from 3/8″ AR500, these paddles can take some severe abuse! Shoot with any pistol/magnum round from any safe distance! Shoot with high-caliber (lead only) center-fire weapons traveling 3200 FPS (or ANY pistol from any SAFE distance) or less from 100 yards. We have sold thousands of these kits and everyone loves how easy this tree is to build!   Angle iron measurements: 4 paddle tree- 46" 6 paddle tree- 66" 8 paddle tree- 84" NEW: You can add  TTM “challenge tree” 4" AR500 paddles to provide the shooter with a more challenging, smaller reactive paddle platform. If interested, you can now purchase optional 4″ AR500 challenge tree paddles as part of this kit. It literally takes just seconds to swap paddles. So, if you’re like Cory and Erika (from Range Time Tactical Shooting) and you’re looking for an even tougher challenge, please be sure to add our 4″ “challenge tree” paddles to your order! See A Comparison of Our Full Line Reactive Steel Targets on page 2:

DIY Texas Star Shooting Target AR500DIY Texas Star! Another INDUSTRY FIRST from The Target Man™**Minor welding requiredTexas Stars are popular targets. They increase response time, shooter coordination, and are just plain old fun to shoot! The Target Man™ has developed a Do-It-Yourself (DIY) Texas Star shooting kit so they are finally affordable... at last!By purchasing the DIY Texas Star, you will receive the spindle/pivot assembly, AR500 knock off paddles, and everything you’ll need to get started. All you will need to purchase is some angle iron, and materials to fabricate a base if you do not buy our optional Multi-Purpose Base.Here’s what’s included….     Rotating hub assemble     Rotating center pivot assembly with nylon bearings for wear resistance     All hardware needed     (5) AR500 “knock off” paddles with 6″ diameter or 8″ diameter, depending on selection.     Instructions     OPTIONAL A36 knock off paddles for .22LR ONLY Here’s what you’ll need to source…     (5) pieces of 1.5″x.25″ angle iron for arms. Recommend approximately 22″ in length     (1) piece of 1.5″x.25″ angle iron for post assembly. Recommend approximately 46″ in length     You will have to fabricate your own base with miscellaneous materials, or you can purchase our optional MPB. We recommend using 46" angle iron for his target.   *** Please note. Due to the design theory of the Texas Star, you may have to use sand bags on top of the MPB. The uneven weight distribution makes the target spin unbalanced, causing slight “drift”. If you decide to make your own target base, you can certainly create a more robust design for added stability.   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY “Triple Tap” – AR500 Steel Reactive Shooting TargetTriple Tap is a new 3-stage reactive target system constructed from ballistic grade AR500. When it’s manufactured by The Target Man™, you know you’re getting a quality tactical training aid!This three way target system is perfect for someone to enhance their tactical shooting skills. Here you have a head shot, hostage target, and center mass shot, and now a gut shot – all in one! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. We’ve engineered this to ensure your training focuses on all of the “take down” areas of the bad guy!This kit is available in a few different configurations for all budget levels. Here you are purchasing an un-welded kit, you can find a welded version in our "Reactive Steel Targets" section. You will also get an un-welded throat assembly. You will have to source your own angle iron and you can choose to purchase our MPB Multi Purpose Base or fabricate your own. Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Gut Shot target hole: 9″ wide Hostage reactive paddle width: 5″ Target comes unpainted. We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY “Snipers Paradise” – AR500 Reactive Steel Shooting Target“Snipers Paradise” (named by FaceBook fan Alex A) is a 3-stage reactive target system constructed from ballistic grade AR500 steel. All of our targets are laser cut for precision.  This three way target system is an excellent way to enhance your tactical shooting skills. Here you have a head shot, hostage target, and center mass shot all in one! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”. We offer this kit in a welded and DIY configuration for all budget levels and it is available with or without our patent-pending Multi-Purpose Base (MPB). You can also add .22, Mild Steel Paddles. To purchase this kit welded click here. The DIY Snipers Paradise assembly is as easy as 1-2-3.   Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets WITHOUT the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add On section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. We recommend you source it locally.   By purchasing the DIY Snipers Paradise you will receive: AR500 IPSC Target With Head and Chest Holes  Two Pivot Tubes Two AR500 Paddles for Target Un-welded Throat Assembly  Detailed Instructions Target Specifications….. Target height: 21.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ Target comes unpainted. Weight: 33lbs   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY CRITICAL SHOT – Reactive AR500 Steel Shooting TargetNamed by AR15.com member Jeffco55! The Target Man Critical Shot is a 2-stage reactive target system constructed from ballistic grade AR500. Critical shot doubles as a hostage target and a center-mass shot. Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”. This kit is available in a few different configurations for all budget levels. This version is the the DIY un-welded assembly that comes with an un-welded throat assembly. This kit is available with and without the our patent-pending Multi-Purpose Base (MPB) and you can also purchase this kit un-welded in our DIY Shooting Target section. Save by purchasing the un-welded kit and fab up your own base.  Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Spartan Armor Systems has teamed up with Contact Armor to offer our customers an extreme concealable package that you can wear to the gym, the grocery store, wherever you feel it is deemed necessary.  *THIS PACKAGE IS SOLD AS IS, NO RETURNS OR EXCHANGES* Introducing Spartan Armor Systems™ Flex Fused Core™ IIIA Soft Body Armor Due to popular demand, we have developed our own version of pistol rated level IIIA soft body armor. The Spartan Armor Systems™ Flex Fused Core™ Soft Armor is comfortable and easy to wear. Keeping with Spartan Armor tradition, it offers GREAT protection at a GREAT price. Composed of only the best American made materials and proudly assembled in our new state of the art facility in Tucson, Arizona. Tested and passed in accordance with NIJ-STD-0101.06 / MIL-STD-662F. Rated to stop .44 MAG SJHP, as well as Special Threat Rated to stop.357 SIG FMJ  This soft armor can be used stand alone, giving level IIIA protection or ICW (in conjunction with) as backer on any of hard armor systems. All parts of this product are proudly American made. .35" profile 10"x12" Panel: Weight 1.14 lb This package comes with: Level IIIA Flexed Fused Core Soft Armor:10x12 Front and Back Panel5x7 Side Panels Contact Armor Hybrid Cool Carrier:Hybrid Cool Carrier (your size of choice M, L, or XL) If you have any questions about sizing and or the IIIA Soft Armor please feel free to reach out to us at: contact@spartanarmorsystems.com (520)396-3335