All

Made in the USA, the HSGI Extended Pistol TACO MOLLE is available in a variety of colors, including black, brown, gray, camo and OD green, and is covered by HSGI’s lifetime warranty against defects in materials and workmanship. Spartan Armor Systems Extended Pistol TACO™ MOLLE MOLLE is an acronym for “modular lightweight load-carrying equipment.” MOLLEs are small pouches that come in various shapes and sizes that are used to hold and secure pieces of tactical gear such as flashlights, spare magazines, knives, multi-tools, communications devices, stun guns, bungee cords, handcuffs – you name it! TACO™ MOLLE shells are available in sizes to hold just about anything that needs to be close at hand and quickly accessible under stressful tactical situations. TACO MOLLEs come in both hard and soft-sided versions, and are typically constructed from tough synthetic materials like nylon or Cordura®, or combined with injection molded polymer side panels. Spartan Armor Systems™ carries a full line of holsters, pouches, TACO MOLLE carriers and other tactical gear, including the HSGI® Extended Pistol TACO MOLLE. The Extended Pistol TACO MOLLE was created by adding 2.25” in length to the original Pistol TACO MOLLE pouch, which allows it to hold longer and larger magazines and other pieces of equipment. Measuring 1" X 1.5" x 6.25", it will securely hold most handgun and tactical rifle magazines, collapsible batons, flashlights and various other tactical items until they need to be quickly and silently deployed. As with all HSGI pouches, the HSGI Extended Pistol TACO MOLLE pouch comes with HSGI’s exclusive clip fasteners for fast and easy attachment to tactical vests or webbing rigs. Made in the USA, the HSGI Extended Pistol TACO MOLLE is available in a variety of colors, including black, brown, gray, camo and OD green, and is covered by HSGI’s lifetime warranty against defects in materials and workmanship.  

 Our branded Spartan Armor Systems snapback hats are available in a variety of colors and styles. Each patriotic hat features a sewn-in leather patch on the front. One size fits most, 4 options to choose from.  Black MultiCam with Black on Black Leather Flag Grey with Natural Leather Betsy Ross Flag Maroon with Natural Leather Betsy Ross Flag Grey with Natural Leather Arizona State    

TRAUMA PAD SIODE PLATES SET OF TWO  Product Overview Spartan Armor Systems® Non-Ballistic Trauma Pads utilize extremely light micro-cellular urethane foam padding that significantly decreases backface deformation and dissipates the impact energy sustained on your plate armor, reducing the transmitted force to the operator’s body. Additionally, our trauma pads dramatically increase comfort and ergonomics while wearing body armor. Simply put, the Spartan Armor Systems® Trauma Pad will drastically reduce blunt force trauma by absorbing energy over the increased surface area of the pad. Increasing Comfort While Decreasing Trauma Backface deformation has the potential to occur when a round impacts any type of body armor. This energy transfer has the potential to be felt regardless of which advanced Spartan Armor Systems® body armor ballistic panel you decide to protect yourself with. In minor cases, the result is bruising around the area of impact. However, in more severe cases backface deformation can result in serious bruising, skin puncture, internal bleeding, and even broken bones. Though most of our body armor has inherently good energy disbursing properties throughout the strike face, our advanced Trauma Pads will further mitigate energy transfer and back face deformation hazards which your body may absorb. The added benefit of the sleek and thin .25” Trauma Pad is increased comfort and mobility, as the pad itself serves as a cushion between body armor plates and the operator. Spartan Armor Systems® Trauma Pads are constructed utilizing highly durable and comfortable Nylon Ripstop fabric, the same material BDUs are made from. We recommend the use of trauma pads with all body armor, especially ceramic body armor which is more prone to backface deformation.  Side Pad Weights: 2.1 ounces (per 6″x6″ side pad) | 2.3 ounces (per 6″x8″ side pad) Thickness: .25″ Thin profile

Spartan SIX Backpack Body Armor Carrier with Optional IIIA Flex Fused Core™ IIIA Armor Panel The Spartan SIX backpack delivers discreet ballistic protection when paired with our level IIIA Flex Fused Core™ body armor panels. While many other backpacks on the market have sewn in ballistic panels, the Spartan SIX has a dedicated armor enclosure chamber that securely holds the ballistic panel in place. This velcro enclosure chamber allows for the armor panel to easily be removed in the event the backpack needs to be washed or replaced! This reduces the future costs to the end user and maintains the ballistic integrity of the armor panel. The Spartan SIX is a true backpack with plenty of pockets and chambers providing lots of storage space for both children and adults. For students concerned about the overall weight of the backpack, rest assured the 1lb 9.4 oz armor panel is hardly noticeable. This makes the Spartan SIX a practical everyday solution for protecting against handgun threats which account for the majority of firearm homicides in the United States. Whether you're buying backpack body armor for yourself or a loved one, you can feel confident that Spartan Armor Systems has your SIX! - Please note that you must select the option above to add our level IIIA Flex Fused Core 11" x 14" body armor panel. Main Backpack Features: 420 Denier nylon YKK zipper on main compartment Adjustable sternum strap Dual side water bottle pockets Front utility pocket with organizer Gear loop Side compression straps Padded lined laptop pocket Versatile padded sleeve designed to fit a Level IIIA backpack armor Secondary compartment with organizer panel Haul handle Expandable main compartment with snap closure Flex Fused Core™ 11" x 14" Body Armor Panel Features: Rated to stop .44 MAG SJHP, as well as Special Threat Rated to stop .357 SIG FMJ  Stand alone body armor panel Proudly Made in U.S.A. Ripstop nylon outer cover with screen printed Spartan Armor Logo  All parts of this product are proudly American made Thinness: .35" profile Weight: 1lb 9.4 oz

TRAUMA PAD SET OF TWO - SWIMMERS CUT 8"X10"   Product Overview Spartan Armor Systems® Non-Ballistic Trauma Pads utilize extremely light micro-cellular urethane foam padding that significantly decreases backface deformation and dissipates the impact energy sustained on your plate armor, reducing the transmitted force to the operator’s body. Additionally, our trauma pads dramatically increase comfort and ergonomics while wearing body armor. Simply put, the Spartan Armor Systems® Trauma Pad will drastically reduce blunt force trauma by absorbing energy over the increased surface area of the pad.   Increasing Comfort While Decreasing Trauma Backface deformation has the potential to occur when a round impacts any type of body armor. This energy transfer has the potential to be felt regardless of which advanced Spartan Armor Systems® body armor ballistic panel you decide to protect yourself with. In minor cases, the result is bruising around the area of impact. However, in more severe cases backface deformation can result in serious bruising, skin puncture, internal bleeding, and even broken bones. Though most of our body armor has inherently good energy disbursing properties throughout the strike face, our advanced Trauma Pads will further mitigate energy transfer and back face deformation hazards which your body may absorb. The added benefit of the sleek and thin .25” Trauma Pad is increased comfort and mobility, as the pad itself serves as a cushion between body armor plates and the operator. Spartan Armor Systems® Trauma Pads are constructed utilizing highly durable and comfortable Nylon Ripstop fabric, the same material BDUs are made from. We recommend the use of trauma pads with all body armor, especially ceramic body armor which is more prone to backface deformation.    Spartan Armor Systems® Trauma Pad Specs:  Dimensions: 8″ X 10″ – Compatible With Spartan Armor Systems® 8"x10" Swimmers Cut Body Armor Chest Pad Weight: 4.9 Ounces  Thickness: .25″ Thin Profile

TRAUMA PAD SET OF TWO - SWIMMERS CUT 10"X12"   Product Overview Spartan Armor Systems® Non-Ballistic Trauma Pads utilize extremely light micro-cellular urethane foam padding that significantly decreases backface deformation and dissipates the impact energy sustained on your plate armor, reducing the transmitted force to the operator’s body. Additionally, our trauma pads dramatically increase comfort and ergonomics while wearing body armor. Simply put, the Spartan Armor Systems® Trauma Pad will drastically reduce blunt force trauma by absorbing energy over the increased surface area of the pad.   Increasing Comfort While Decreasing Trauma Backface deformation has the potential to occur when a round impacts any type of body armor. This energy transfer has the potential to be felt regardless of which advanced Spartan Armor Systems® body armor ballistic panel you decide to protect yourself with. In minor cases, the result is bruising around the area of impact. However, in more severe cases backface deformation can result in serious bruising, skin puncture, internal bleeding, and even broken bones. Though most of our body armor has inherently good energy disbursing properties throughout the strike face, our advanced Trauma Pads will further mitigate energy transfer and back face deformation hazards which your body may absorb. The added benefit of the sleek and thin .25” Trauma Pad is increased comfort and mobility, as the pad itself serves as a cushion between body armor plates and the operator. Spartan Armor Systems® Trauma Pads are constructed utilizing highly durable and comfortable Nylon Ripstop fabric, the same material BDUs are made from. We recommend the use of trauma pads with all body armor, especially ceramic body armor which is more prone to backface deformation.    Spartan Armor Systems® Trauma Pad Specs:  Dimensions: 10″ X 12″ – Compatible With Spartan Armor Systems® Swimmers Cut 10"x12" Body Armor Chest Pad Weight: 5.7 Ounces (Per 10″ X 12″ Chest Pad) Thickness: .25″ Thin Profile

TRAUMA PAD SET OF TWO - 11X14   Product Overview Spartan Armor Systems® Non-Ballistic Trauma Pads utilize extremely light micro-cellular urethane foam padding that significantly decreases backface deformation and dissipates the impact energy sustained on your plate armor, reducing the transmitted force to the operator’s body. Additionally, our trauma pads dramatically increase comfort and ergonomics while wearing body armor. Simply put, the Spartan Armor Systems® Trauma Pad will drastically reduce blunt force trauma by absorbing energy over the increased surface area of the pad.   Increasing Comfort While Decreasing Trauma Backface deformation has the potential to occur when a round impacts any type of body armor. This energy transfer has the potential to be felt regardless of which advanced Spartan Armor Systems® body armor ballistic panel you decide to protect yourself with. In minor cases, the result is bruising around the area of impact. However, in more severe cases backface deformation can result in serious bruising, skin puncture, internal bleeding, and even broken bones. Though most of our body armor has inherently good energy disbursing properties throughout the strike face, our advanced Trauma Pads will further mitigate energy transfer and back face deformation hazards which your body may absorb. The added benefit of the sleek and thin .25” Trauma Pad is increased comfort and mobility, as the pad itself serves as a cushion between body armor plates and the operator. Spartan Armor Systems® Trauma Pads are constructed utilizing highly durable and comfortable Nylon Ripstop fabric, the same material BDUs are made from. We recommend the use of trauma pads with all body armor, especially ceramic body armor which is more prone to backface deformation.  Spartan Armor Systems® Trauma Pad Specs:  Dimensions: 11″ X 14″ – Compatible With All Spartan Armor Systems® 11"X14" Body Armor Chest Pad Weight:6.4 Ounces Thickness: .25″ Thin Profile

TJ Jeep Mount for Hi-Lift® Jacks The TJ Jeep Mount allows you to easily mount you Hi-Lift® jack to save time and space in your jeep. This convenient storage solution is made from quality parts and designed to last. The TJ Jeep Mount is the perfect accessory for your jeep both on and off-road.    Specifications: CNC Cut to perfection each and every time. 3/16" Hot Rolled Pickled and Oiled (HRPO) steel construction Slotted bolt holes to accommodate a hi-lift brand jack or most generic hi-lift jacks (have not heard of one not work yet) Precision bends on a CNC press brake! Powder coated TO LAST.  We SANDBLAST each bracket by hand prior to coating to ensure the LONGEST lasting powder in the industry! STAINLESS STEEL hardware to mount the brackets on the hood of your jeep Grade-5 jack mounting hardware

Spartan Armor Systems® Spall Containment Sleeve   Product Overview Spartan Armor Systems® strives to afford their customers and operators in the field with the highest quality body armor and every advantage possible. Spartan Armor Systems® Spall Containment Sleeves provide an extra layer of protection from fragmentation (spalling) and a high degree of confidence when wearing our Base Coat or Full Coat Spartan™ Omega™ AR500 and AR550 Steel Core body armor plates. These spall containment sleeves will reduce or potentially eliminate spalling as projectiles ricochet off the AR Plate, effectively containing such fragments within layers of Aramid Fibers and the rugged 1000D Cordura Ballistic Nylon Casing.   Added Shielding  Spalling is a reality of steel core plates that do not have a means of mitigation such as our Encapsaloc™ fragmentation mitigation coating. It’s the nature of high-velocity ballistic impacts and it is unavoidable. However, it is possible to add spall mitigation to base coat plates after the fact, or even increase the level of mitigation for full coat plates. The Spartan Armor Systems® Spall Containment Sleeve effectively helps shield the operator against spalling and fragmentation in an engagement by capturing the small projectiles within the highly flexible and durable ballistic nylon casing composed of 1000D Cordura fabric. Boiled down, the Spartan Armor Systems® Spall Containment Sleeve is another level of shielding and protection you can opt to carry into battle without adding any noticeable weight to your loadout.    Spartan Armor Systems® Spall Containment Sleeve Specs: Ballistic Nylon Casing 1000D Cordura Multiple Layers of Laminated Ballistic Aramid Fibers (Front Facing) For Front and Back Protection Fits 10" X 12" Shooters Cut Plate Sizes Flexible and Durable 7.4 oz. each Made in U.S.A. Includes One (1) Sleeve   Note: You Will Receive One (1) Spall Containment Sleeve With Your Order. Note: Body Armor Plates Not Included. Note: No Spall containment sleeve will stop 100% of spalling.

TRAUMA PAD SET OF TWO - 10X12   Product Overview Spartan Armor Systems® Non-Ballistic Trauma Pads utilize extremely light micro-cellular urethane foam padding that significantly decreases backface deformation and dissipates the impact energy sustained on your plate armor, reducing the transmitted force to the operator’s body. Additionally, our trauma pads dramatically increase comfort and ergonomics while wearing body armor. Simply put, the Spartan Armor Systems® Trauma Pad will drastically reduce blunt force trauma by absorbing energy over the increased surface area of the pad.   Increasing Comfort While Decreasing Trauma Backface deformation has the potential to occur when a round impacts any type of body armor. This energy transfer has the potential to be felt regardless of which advanced Spartan Armor Systems® body armor ballistic panel you decide to protect yourself with. In minor cases, the result is bruising around the area of impact. However, in more severe cases backface deformation can result in serious bruising, skin puncture, internal bleeding, and even broken bones. Though most of our body armor has inherently good energy disbursing properties throughout the strike face, our advanced Trauma Pads will further mitigate energy transfer and back face deformation hazards which your body may absorb. The added benefit of the sleek and thin .25” Trauma Pad is increased comfort and mobility, as the pad itself serves as a cushion between body armor plates and the operator. Spartan Armor Systems® Trauma Pads are constructed utilizing highly durable and comfortable Nylon Ripstop fabric, the same material BDUs are made from. We recommend the use of trauma pads with all body armor, especially ceramic body armor which is more prone to backface deformation.  Spartan Armor Systems® Trauma Pad Specs:  Dimensions: 10″ X 12″ – Compatible With All Spartan Armor Systems® 10" X 12" Body Armor Chest Pad Weights:  5.7 Ounces (Per 10″ X 12″ Chest Pad) Thickness: .25″ Thin Profile

Tempronics PCS200 Personal Climate System – Portable Heating and Cooling Seat Cover for Thermal Control in Car, Truck, Off-road, Aviation Applications. The Tempronics Personal Climate System – utilizes thermoelectric elements in the patented Climate Control Ribbon™ and Climate Insert™ in a portable, robust and efficient design for cooling and heating in ALL climate conditions. Ideal for vehicles without heat or air conditioning, or where heat or air conditioning is inadequate. Designed to provide critical thermal relief in the most challenging environments such as Aviation, Military, Law Enforcement, Work Truck, Off-Road or even your personal vehicle. There is nothing else like it in the market today. Tempronics. Our obsession is delivering impactful personalized climate solutions. Features include: Efficient thermo-electric technology Plugs into your vehicle power source. Requires standard automotive 12-volt, 10-amp cigarette lighter, power outlet/accessory plug. Provides real thermal stress relief for health, safety and comfort Designed to meet automotive interior environmental, reliability and noise test protocols Use 120-volt power with a 120V to 12V 10-amp DC converter (available on Amazon) Simple and easy to install and operate   POWER/CONTROL Power:    12V/10A, ANSI/SAE J563 Vehicle Power Accessory Plug                                     (optional 120 V power supply for office/home use) Control: HEAT/OFF/COOL and HIGH/LOW rocker switches   THERMAL PERFORMANCE 212 Thermoelectric Cooling Elements 20 CFM   Pull-Through Ventilation Average Time-to-Hot Sensation:       1 Minute Average Time-to-Cold Sensation:      2-3 Minutes   DESIGNED TO MEET AUTOMOTIVE OEM ENVIRONMENTAL/RELIABILITY/DURABILITY STANDARDS Electrical/Electronics Components Fluid and Salt Fog Knee Load and Ingress/Egress tests   PERFORMANCE COMPONENTS Ventilation Areas:                  Breathable spacer mesh Conductive Areas:                 Highly conductive, wear resistant fabric Switches/Electronics:           IP65/IP66 Note: Not suitable for watersports or continuously wet environments.  

Show your pride by sporting a Spartan Armor Systems™ patch on your plate carrier, or any Velcro/hook and loop surface!This patch is constructed from durable PVC. The back of the patch has Velcro so it will stick nicely to your rig.   Remember, everything we sell comes with free shipping! Protect What's Yours.... LIKE A SPARTAN!

JK Jack Mount for Hi-Lift® Jacks The JK Jack Mount allows you to easily mount you Hi-Lift® jack to save time and space in your jeep. This convenient storage solution is made from quality parts and designed to last. The JK Jeep Mount is the perfect accessory for your jeep both on and off-road.      Note: Please know the year/model of your Jeep before purchasing.  Jeep JK's are from 2007 - current. Here are the specs of  the JK Jack Mount..... CNC Cut to perfection each and every time. 3/16" Hot Rolled Pickled and Oiled (HRPO) steel construction Slotted bolt holes to accommodate a hi-lift brand jack or most generic hi-lift jacks (have not heard of one not work yet) Precision bends on a CNC press brake! Powder coated TO LAST STAINLESS STEEL hardware to mount the brackets on the hood of your jeep Grade-5 jack mounting hardware All jack mounting hardware and instructions are included.

TRAUMA PAD SET OF TWO - 8" X 10"   Product Overview Spartan Armor Systems® Non-Ballistic Trauma Pads utilize extremely light micro-cellular urethane foam padding that significantly decreases backface deformation and dissipates the impact energy sustained on your plate armor, reducing the transmitted force to the operator’s body. Additionally, our trauma pads dramatically increase comfort and ergonomics while wearing body armor. Simply put, the Spartan Armor Systems® Trauma Pad will drastically reduce blunt force trauma by absorbing energy over the increased surface area of the pad.   Increasing Comfort While Decreasing Trauma Backface deformation has the potential to occur when a round impacts any type of body armor. This energy transfer has the potential to be felt regardless of which advanced Spartan Armor Systems® body armor ballistic panel you decide to protect yourself with. In minor cases, the result is bruising around the area of impact. However, in more severe cases backface deformation can result in serious bruising, skin puncture, internal bleeding, and even broken bones. Though most of our body armor has inherently good energy disbursing properties throughout the strike face, our advanced Trauma Pads will further mitigate energy transfer and back face deformation hazards which your body may absorb. The added benefit of the sleek and thin .25” Trauma Pad is increased comfort and mobility, as the pad itself serves as a cushion between body armor plates and the operator. Spartan Armor Systems® Trauma Pads are constructed utilizing highly durable and comfortable Nylon Ripstop fabric, the same material BDUs are made from. We recommend the use of trauma pads with all body armor, especially ceramic body armor which is more prone to backface deformation.    Spartan Armor Systems® Trauma Pad Specs:  Dimensions: 8″ X 10″ Compatible With All Spartan Armor Systems® 8" X 10" Body Armor Chest Pad Weight: 4.9 Ounces Thickness: .25″ Thin Profile

TRAUMA PAD SET OF TWO - SWIMMERS CUT 11"X14"   Product Overview Spartan Armor Systems® Non-Ballistic Trauma Pads utilize extremely light micro-cellular urethane foam padding that significantly decreases backface deformation and dissipates the impact energy sustained on your plate armor, reducing the transmitted force to the operator’s body. Additionally, our trauma pads dramatically increase comfort and ergonomics while wearing body armor. Simply put, the Spartan Armor Systems® Trauma Pad will drastically reduce blunt force trauma by absorbing energy over the increased surface area of the pad.   Increasing Comfort While Decreasing Trauma Backface deformation has the potential to occur when a round impacts any type of body armor. This energy transfer has the potential to be felt regardless of which advanced Spartan Armor Systems® body armor ballistic panel you decide to protect yourself with. In minor cases, the result is bruising around the area of impact. However, in more severe cases backface deformation can result in serious bruising, skin puncture, internal bleeding, and even broken bones. Though most of our body armor has inherently good energy disbursing properties throughout the strike face, our advanced Trauma Pads will further mitigate energy transfer and back face deformation hazards which your body may absorb. The added benefit of the sleek and thin .25” Trauma Pad is increased comfort and mobility, as the pad itself serves as a cushion between body armor plates and the operator. Spartan Armor Systems® Trauma Pads are constructed utilizing highly durable and comfortable Nylon Ripstop fabric, the same material BDUs are made from. We recommend the use of trauma pads with all body armor, especially ceramic body armor which is more prone to backface deformation.    Spartan Armor Systems® Trauma Pad Specs:  Dimensions: 11″ X 14″ – Compatible With Spartan Armor Systems® Swimmers Cut 11"X14" Body Armor Chest Pad Weight: 6.4 Ounces Thickness: .25″ Thin Profile

1/4' thick A25 Mild Steel Steel Hanging Targets Also available in AR500 Steel See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ TEXAS WALKER REACTIVE TARGET – WELDED AND READY TO GO!!Though we have this target in the “Do It Yourself” category, we get many requests for a fully welded product that is ready to go. Well, here it is….welded and ready for use right out of the box!Draw a “start” and “finish” line in the sand and challenge your buddy to see who can “walk” the target past the finish line in the least amount of time! Hours upon hours of enjoyment.CNC cut from 3/8″ AR500! Choose between 3”(small) or 4.5” (large) paddles. Once assembled, this target is about 6” (small) or  9″ (large) cubed.Due to its size, this item ships USPS or UPS ground.   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Texas Star Replacement Paddle In need of a spare paddle for your Texas Star? You are in luck! Below are the available sizes, you choose how many you need. The Texas Shooting Star AR500 Reactive Target is designed to provide years of target practice and training. However, after extended use it may be necessary to replace your steel paddles. Buying individual paddles is also a great option for those looking to keep spare paddles for their Texas Start target. Available Paddle Sizes  6 Inch 8 Inch

DIY Plate Rack Replacement Paddles

Standard Pivot Tube Replacement See A Comparison of Our Full Line Reactive Steel Targets on page 2:

DOM pivot tubes provide extreme resistance to wear and are twice the thickness of our our standard pivot tubes provided with our kits. Your dueling tree will get a lot more life from the additional strength of the thicker walled pivot tubes. Well worth the upgrade! See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ IPSC 66% for Multi-Purpose Base Stand By popular demand, here you have it! We have added a regular 66% IPSC target for use with our patent-pending Multi-Purpose Base (MPB).So, if you have a MPB and you already own a reactive target system, this 66% IPSC target can be used and slid right in to the “throat” (the piece that holds your reactive target to the angle iron). If you don’t already have an MPB, please select “Add MPB and Throat” and we’ll ship everything out that you’ll need.We have angle iron as an option (in Replacements and Add Ons), but I suggest NOT buying it. The angle iron literally costs us about $7/piece, which is what you can source it locally for. The shipping is the killer, which is why we have to charge so much. You MUST use 1.5″ x .25 American-spec (standard type) angle iron. Available at most home improvement stores or any steel yard.This target is sure to provide hours of fun. It is a perfect training aid for the LEO, military sniper, or even just the weekend plinker.  This target is not going to score you chicks like our reactive target systems (because, well, they’re much cooler), but it will hone your shooting skills and the other guys at the range will have “man envy” for having such a nice, professional target system!Specs     3/8″ AR500 armored steel – engineered to last a lifetime     66% IPSC (approximately 12″ W x 19.5 H)     Safely defects frag towards the ground     Ships raw steel. Painted white in stock photo for reference only See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ “Triple Tap” – AR500 Steel Reactive Shooting TargetTriple Tap is a new 3-stage reactive target system constructed from ballistic grade AR500. When it’s manufactured by The Target Man™, you know you’re getting a quality tactical training aid!This three way target system is perfect for someone to enhance their tactical shooting skills. Here you have a head shot, hostage target, and center mass shot, and now a gut shot – all in one! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. We’ve engineered this to ensure your training focuses on all of the “take down” areas of the bad guy!This kit is available in a few different configurations for all budget levels. Here you are purchasing a pre-welded target with a throat. You can save by purchasing the un-welded kit and fab up your own base. This version is found in our DIY AR500 Target section. Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Gut Shot target hole: 9″ wide Hostage reactive paddle width: 5″ Target comes unpainted. We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ Reactive ThroatSo, you lost your reactive throat somewhere at the range? The solution is right here! This replacement throat is pre-welded and ships for FREE. With the AR500 armored deflector, you can be sure this will last damn near forever. It’s literally “bulletproof”. See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ Multi-Purpose Base (MPB)The base comes with 4 legs and hair pins.A TTM original design! We’ve taken everything in to consideration while designing our patent-pending Multi-Purpose Base (MPB). The MPB was engineered with many different key factors. Here’s some benefits of our MPB…     Portable! The MPB was designed with collapsible legs for easy transport. The MPB is designed to fit in to the trunk of the smallest sedan!     Durable! The MPB is constructed from 3/8″ mild steel with an AR500 protector plate. The AR500 protector plate protects the base from errant shots.     Replaceable components! Should you have a stray bullet hit the base, we offer replacement legs!     Light Weight! Compared to other bases, our base weighs much less     Universal! Engineered to easily adapt to ALL of our target systems     Collapsible! With the pull of a few pins, the legs quickly pop off our target base. Assembly is just as easy!     Sturdy! You don’t have to worry about “wobble”. The MPB features 2 angle iron inserts. One insert ensures the angle iron is in the vertical position. The vertical position is for our reactive series targets. The angled position, which ensures the angle iron sits at an approximate 22 degree “lean” toward the shooter, ensures the correct angle when utilizing our dueling tree target systems. The only needed for the shooter to source would be the angle iron. We offer angle iron here under Replacements and Add Ons, but with the cost of shipping, you may want to consider sourcing it locally. Expect to pay $5-$10 for a piece of angle iron. This target system will ONLY work with Standard American (most common size) 1.5″ x .25″ angle iron. See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ “Hostage Moe” – AR500 Reactive Hostage Shooting Target“Hostage Moe” is a 66% IPSC shooting target with a reactive hostage head location. Constructed from ballistic grade AR500, this target is sure to provide years upon years of enjoyment. Whether you’re a competition shooter, recreational shooter, or even LEO, this target is sure to hone your skills and provide hours of enjoyment.This target system is available in a few different variations. You can purchase either the do-it-yourself (DIY) target system, or you can have us do all the welding for you. The welding is super easy and we provide instructions for the reactive throat. The reactive throat (pictured) is what holds your target to the angle iron and it positions your target at the optimal 22 degree angle, which safely deflects bullet fragments down upon impact.Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Also, if you don’t already have one, you may want to consider our patent-pending multi-purpose base (MPB). The MPB works great for all of our reactive target systems, plus you can also use it for our dueling tree target systems. There are two angle insertion slots – one that holds the angle iron in the vertical position for use with our reactive target systems, and one that holds the angle iron at a 22 degree lean for our dueling tree target systems.Specifications                                      12″(W) x 20″(H)     Ballistic grade 3/8″ AR500     Weight – Approximately 22 lbs.     Target comes unpainted.     DIY kit includes un-welded throat, un-welded target, pivot tube, reactive hostage paddle, and instructions for throat     Welded kit includes pre-welded throat, pre-welded pivot tube, and reactive hostage paddle     OPTIONAL angle iron is approximately 4 ft. (+/- a couple of inches). You MUSTused 1.5″x.25″ angle for this to work! We recommend using 46" angle iron for his target.   OPTIONAL: Multi-Purpose Base specifications can be found here.  See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Triple Tap Replacement Paddles           See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Replacement Springs for Texas Star AR500 Reactive Target Whether you've lost some springs or you need to replace old worn springs, we have you covered! This 5 spring replacement pack will get your Texas Star steel shooting target back in order.  PACK OF 5

Sniper's Paradise Replacement Paddles See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ Replacement DIY tree paddlesLose your DIY dueling tree paddle? Here you’ll find individual replacement paddles for your Target Man DIY Dueling Tree kit! Buy 1 or as many as you need. Remember, FREE SHIPPING as with all of our products!3/8″ AR500 paddles. 6″ paddle face See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Replacement Leg Kit for Multipurpose Base  See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ 66% IPSC Target AR500Here you have it…. a 66% (2/3 scale) IPSC cut from 3/8″ AR500 ballistic rated steel! This target is sure to provide hours upon hours of fun to shooters of ALL levels. If you follow the guidelines in our FAQ for shooting parameters, you can realistically expect this target to last you tens of thousands of impacts!Specifications:     3/8″ AR500 + (most of our steel comes in at 515-520)     CNC cut to perfection!     12″(W) x 20″(H)     2 mounting hole locations. As with all of our products, our popular FREE SHIPPING applies! See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ IPSC Target 3/8″ AR500 ***1/2 Scale*** 3/8″ AR500 Shooting Target IPSC Half-Scale 13.625(H) x 9″(W) See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ IPSC Target 1/2″ AR500 ***1/2 Scale*** 1/2″ AR500 Shooting Target IPSC Half-Scale 13.625(H) x 9″(W) See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ IPSC “Mini”3/8″ AR500Measures 8.25″(H) x 5″(W) See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ IPSC “Mini”1/2″ AR500Measures 8.25″(H) x 5″(W) See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Hostage Moe Replacement Paddle See A Comparison of Our Full Line Reactive Steel Targets on page 2:

SPARTAN ARMOR SYSTEMS® "SPARTAN" SHOOTERS CUT PLATE CARRIER   Product Overview The Spartan Armor Systems® "Spartan" Plate Carrier is true to its name: sleek, minimalist, and highly capable on the battlefield. Designed to be lightweight, agile, and to enable the wearer to rapidly engage, the Spartan Armor Systems® “Spartan” Shooters Cut Plate Carrier is designed for use with our shooters cut steel core armor: Spartan™ Omega™ AR500 and AR550. Adjustable from Medium to XL, this carrier fits 10”x12” shooters cut plates and will accommodate 6”x6” side plates in the cummerbund. The Spartan Shooters Cut Plate Carrier is built to last and gives you the key essential features you need without sacrificing quality. The Spartan Shooters Cut Carrier is a great entry-level carrier that offers a variety of features at an affordable price point. When the situation dictates less is more, this carrier delivers the goods where it counts.    Spartan Armor Systems® Spartan Shooters Cut Plate Carrier Specs: Lightweight Plate Carrier That Accepts Side Plates Designed For Spartan Armor Systems® 10” X 12” Shooters Cut Steel Core Plates Adjustable From Medium To XL PALS Webbing On Front And Back For Versatility And Customization Velcro On Front And Back For Id Patch Placement Cummerbund Is Designed To Hold 6” X 6” Side Plates Comfortably Shoulder Pads Included 860 Denier Poly Construction Reinforced Drag Handle   SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.    Chest Plate Weight (per plate):  10"x12" Plate: Base Coat 8lbs 10oz. Side Plate Weight (per plate):  6×6 approximately 2lbs 1oz (base coat)  Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.  

PRODUCT DETAILS Spartan Armor Systems Active Shooter Kit   Spartan™ Omega™ AR500 Body Armor with Hydra Plate Carrier. This active shooter kit set up is designed to allow a quick response time and comfortable performance fit with superior Level III Rifle Rated Protection. Carrier includes emergency drag handle, quick cinch adjustments for the front and hook and loop adjustments on the shoulders. The Spartan Armor Active Shooter Kit is perfect for rapid response situations.   Front map pocket Emergency drag handle Removable padded mesh shoulder pads with hook and loop guides Adjustable shoulder straps Hook and loop webbing Heavyweight webbing for modular attachments Padded mesh interior lining Quick adjust cinches Quick release buckles Easy access plate pockets Waist Size: 30″ – 46″ adjustable sizing Accepts traditional Medium or Large SAPI plates up to 10.25″ x 13.25″. Best fit for our shooters cut and swimmers cut Spartan™ Omega™ AR500 Body Armor and AR550 Body Armor. This package includes our Spartan™ Omega™ AR500 Body Armor 10x12 lab certified Armor. 1/4" thickness and provides the operator with Level III protection IAW NIJ0101.06 standards.    Our Spartan™ Omega™ AR500 Body Armor has also been tested to go beyond the Level III testing protocol (6 shots .308/M80 Ball, 2780 fps).  Special Threat Ratings: SS109/M855 3148 fps 6 shots .223 REM 60gr. Partition 2762 fps 6 shots M43 MSC 2407 fps 6 shots M67 Led Core 2375 fps 6 shoots     With all of our AR500 Omega™ Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates and secondary ballistics available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about the Spartan™ Omega™ AR500 Body Armor we use to construct out body armor! Coating Options:  Choose the Full Coat option to have the plate lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities. To learn more check out our blog on the coating options: https://www.spartanarmorsystems.com/blog/encapsaloc-fragmentation-mitigation-antispall-body-armor-coating/   Chest Plate Weight (per plate): 10x12 Spartan™ Omega™ AR500 Body Armor Shooters Cut: Base Coat 8lbs 7oz. Full Coat 9lbs 3oz.      Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.         *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

The Hydra Plate Carrier is a highly adaptable carrier ideal for quick deployment and emergency situations such as active shooter scenarios. Easily adjustable buckles ensure a snug and comfortable fit on the sides. Ample length shoulder straps allow the Hydra plate carrier to be easily adjusted to fit a wide variety of body types. Breathable mesh is used at chest, back and shoulder contact points to allow for maximum breathability. The Hydra plate carrier is a great choice for anyone looking for a lightweight and versatile body armor configuration. Front map pocket Emergency drag handle Removable padded mesh shoulder pads with hook and loop guides Adjustable shoulder straps Hook and loop webbing Heavyweight webbing for modular attachments Padded mesh interior lining Quick adjust cinches Quick release buckles Easy access plate pockets Waist Size: 30″ – 46″ adjustable sizing Accepts Medium or Large SAPI plates up to 10.25″ x 13.25″   Constructed from lab certified AR500 Omega™ Armor, (1/4” thickness) these plates provide the operator with Level III protection IAW NIJ0101.06 standards.   With all of our AR500 Omega™ Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about the AR500 Omega™ Armor we use to construct out body armor!     Full Coat or Base Coat Options:    We are excited to announce our potentially “life saving” breakthrough!  The strike face for our plates is mark embedded with our Spartan logo! Both sides of these plates are coated, however, the back side only has a “courtesy coat” to protect against wear and rust. The front of the plate is lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. Due to popular demand, we have added a “base coat” only option for our AR500 Omega™ armor products. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.   Chest Plate Weight (per plate): 10x12 AR500 Omega™ Armor Swimmers Cut: Base Coat 7lbs 7oz. Full Coat 8lbs 1oz.    *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega™ Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch  Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.  Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing. Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.  Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch  Ares Level IV Ceramic Body Armor - Set of Two Plates The Ares level IV ceramic body armor plate is our toughest and lightest level IV plate yet. With a boron carbide strike face and UHMWPE backer, the Ares is a military grade plate that has been laboratory tested and proven to defeat .30-06 M2AP armor piercing rounds. Boron carbide is one of the hardest materials known to man. However, it’s lighter than other softer ceramics such as aluminum oxide, which is used in most civilian grade body armor. The Ares is a superior level IV plate that is proudly manufactured in our Tucson, AZ facility. Lightweight Level IV Protection It’s no secret that speed, agility and stamina are critical during hostile engagements. While many level IV ceramic body armor plates weigh around 7 or 8 lbs per plate, the Ares weighs in at just 6.1 lbs per plate.  Not only does the Ares plate provide the operator with a clear weight advantage, but the boron carbide strike face easily destroys .30-06 M2 AP rounds upon impact. The lightweight UHMWPE backer catches the remaining bullet fragments preventing any penetration or secondary spall injury to the operator.  The Ares level IV ceramic body armor plate is the perfect choice for Law Enforcement, Security Contractors, Military, First Responders or even concerned civilians looking for advanced threat protection and safety. Full Edge-To-Edge ESAPI Protection Get what you're paying for with full edge-to-edge protection! The Ares provides maximum protection for vital organs in a full 9.5" x 12.5" medium ESAPI shooters cut profile. This allows for better protection to the operator in the event of near-edge impacts. The highly compatible ESAPI sizing gives the operator the freedom to choose from a wide range of plate carriers. The Ares features a traditional multicurve design for added comfort during extended duty use. Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ

Spartan Armor Systems® Spartan DL Plate Carrier Specs:  Low-profile Minimalist Carrier Bottom-loading Design Supports The Plate In The Pocket 4″ Fully Adjustable Elastic Cummerbund 2” Low Profile Shoulder Adjustment Velcro On Front And Back For Name, Id, Blood Type, Etc. Material: 500 Denier Nylon/Pu Nylon Webbing Size: 11.4" X 12.5" Integrated Mag Pouches Hold M4 Mags As Well As A Pistol Mags (2 On Each Side) Note: Due to the extremely low profile design of the Spartan DL Plate Carrier, they WILL NOT ACCEPT SIDE PLATES. Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A. SPARTAN ARMOR SYSTEMS® SPARTAN DL PLATE CARRIER Product Overview When the environment you are operating in demands discretion and stealth, the Spartan Armor Systems® DL Plate Carrier offers minimalist features for extreme concealment. Virtually indiscernible when worn beneath loose clothing, these ultra-minimalist carriers are designed to fit with Spartan Armor Systems® Flex Fused Core Soft Armor Panels. Covert, comfortable, and concealed - the Spartan DL Plate Carrier is made for environments that demand maintaining a low profile. The Spartan DL Concealment carrier can also be worn overt (on the outside of clothing) and can accept hard armor such as Spartan™ Omega™ AR500, AR550, or Armis IIIA Hard Armor. Rugged, Reliable, Versatile The Low-profile design of the Spartan Armor Systems® DL Plate Carrier features bottom-loading plate insertion capability and a 4” fully adjustable cummerbund. This carrier comes in two sizes and can accommodate 10"x12" or 11"x14" body armor plates. The 500 Denier/Nylon blended material makes for an extremely durable, comfortable carrier that will flex and bend, contouring to your torso as you move throughout your day and activities. The inclusion of built-in soft Mag Pouches provides a tactical advantage. The Spartan DL Plate Carrier can accept AR Mags as well as a Pistol Mag (2 on each side) for versatility and quick access to your reloads.  Spartan Armor Systems® Spartan DL Plate Carrier Specs:  Low-profile Minimalist Carrier Bottom-loading Design Supports The Plate In The Pocket 4″ Fully Adjustable Elastic Cummerbund 2” Low Profile Shoulder Adjustment Velcro On Front And Back For Name, Id, Blood Type, Etc. Material: 500 Denier Nylon/Pu Nylon Webbing Size: 11.4" X 12.5" Integrated Mag Pouches Hold M4 Mags As Well As A Pistol Mags (2 On Each Side) Note: Due to the extremely low profile design of the Spartan DL Plate Carrier, they WILL NOT ACCEPT SIDE PLATES. SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards. Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.  Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A.

SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR   Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards.   Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.    Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A.

SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR   Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards.   Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.    Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds .35" Profile 6"x6", 6"x8", 6"x11", and 5"x15" Panel sizes  Made In U.S.A.

SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO   Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.    Chest Plate Weight (per plate):  8”x10” Plate: Base Coat 5lbs 13oz. Full Coat 6lbs 7oz 10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz. 11"x14" Plate: Base Coat 10lbs 1oz. Full Coat 11lbs 6oz. Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.   Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

SPARTAN™ OMEGA™ AR500 BODY ARMOR SWIMMERS CUT SET OF TWO   Product Overview Sleek, lightweight, and ready to move, the Swimmers Cut Spartan™ Omega™ AR500 Body Armor affords operators with increased mobility, a decrease in overall weight. The “Swimmers Cut” gets its name from the improved range of motion in the shoulders due to the angle of cut in the top corners of the plate. This allows for a lighter and less obstructive body armor plate while still providing coverage for vital organs. Swimmers Cut Spartan™ Omega™ AR500 Body Armor is constructed from lab certified AR500 ballistic grade steel, (¼” thickness) and these body armor plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. When the environment dictates speed and mobility as primary and critical factors, the Spartan omega AR500 Body Armor Swimmers Cut Plates are an excellent choice.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.   Exceptional Comfort & Engineering You have the choice of getting our AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved AR550 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.  Chest Plate Weight (per plate):  8x10 Plate: Base Coat 5lbs. Full Coat 5lbs 11oz. 10x12 Plate: Base Coat 7lbs 7oz. Full Coat 8lbs 1oz. 11x14 Plate: Base Coat 9lbs 2oz. Full Coat 10lbs 15oz. Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    Spartan™ Omega™ AR500 Body Armor Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.   *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.  

SPARTAN™ OMEGA™ AR500 BODY ARMOR SIDE PLATES   Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. Spartan™ Omega™ AR500 plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.      Side Plate Weight (per plate):  6×6 approximately 2lbs 1oz (base coat) or 2lbs 15oz (full coat) 6×8 approximately 3lbs 10oz (base coat) or 3lbs 14oz (full coat) Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER Product Overview The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.  Ready For Anything Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike. Spartan Armor Systems® Sentinel Plate Carrier Specs: Adjustable from 38" To 48" Chest Size Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Padded Mesh Separators For The Interior Of The Carrier For Breathability Fits 10" X 12" Shooters Cut Plates Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9” X 3” Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 2lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.   SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.    Chest Plate Weight (per plate):  10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz. Side Plate Weight (per plate):  6×6 approximately 2lbs 1oz (base coat) or 2lbs 15oz (full coat) 6×8 approximately 3lbs 10oz (base coat) or 3lbs 14oz (full coat)   Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.    

Sentinel Legion XL Plate Carrier Specs:  Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Elevated Mesh Allowing For Extreme Breathability  Holds 11"X14" Front And Back Plates Removable Cummerbund With Side Plate Pockets For 6"X6" And 6"X8" Armor Velcro In Front Of The Carrier Is 8"x4" With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9x3 Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 3lbs. 9oz. Shooters Cut Plate Weight (per plate):. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side Plate Weight (per plate):     6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat) 6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat) AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only SPARTAN ARMOR SYSTEMS® SENTINEL LEGION XL PLATE CARRIER  The Spartan Armor Systems® Legion XL Plate Carrier is rugged, reliable, and fully adjustable from 2XL-4XL. Designed to hold our 11”x14” body armor plates, the Legion XL can also accommodate 6”x6” or 6”x8” side plates for additional protection and features a completely removable cummerbund. Developed For You Born of numerous customer inquiries and feedback, we developed the Sentinel Legion XL Plate Carrier to be adjustable from a 2XL-4XL size. The Sentinel Legion XL weighs in at approximately 3lbs. 9oz., will hold our Steel Core AR500 Omega and AR550 11”x14” body armor plates, while also offering the option to add in 6"x6" or 6"x8" side plates. If you don't want to run the Sentinel Legion XL with the cummerbund - no sweat! The cummerbund is easily removable so you can run your plate carrier with just the front and back plates or the full set-up with side plates. Comfort And Convenience The Spartan Armor Systems® Legion XL Plate Carrier includes features designed for customization, modularity, and comfort while affording supreme protection in the field. Anti-slip shoulder padding with velcro, side release buckles on the waist strap, and elevated mesh for breathability make this one big, bad, carrier.  Sentinel Legion XL Plate Carrier Specs:  Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Elevated Mesh Allowing For Extreme Breathability  Holds 11"X14" Front And Back Plates Removable Cummerbund With Side Plate Pockets For 6"X6" And 6"X8" Armor Velcro In Front Of The Carrier Is 8"x4" With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9x3 Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 3lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates. SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.  Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process. Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo. IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation. Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Shooters Cut Plate Weight (per plate):. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness   Side Plate Weight (per plate):     6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat) 6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat)   AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor: Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.  

SPARTAN ARMOR SYSTEMS SENTINEL SWIMMERS PLATE CARRIER Durable emergency drag handle Anti-Slip shoulder padding w/ velcro Side release buckles on internal waist strap Padded elevated mesh on interior of carrier for breathability Fits 10x12 Swimmers cut plates Removable cummberbund with side plate pockets for 6x6 and 6x8 side plate armor Velcro in front of the Carrier is 8x4 w/ a velcro loop on each side Velcro on the back of the Carrier measures 9x3 Stronger carrier material that can withstand through wear and tear over a long period of time 1000 denier Bottom loading Weighs approximately 2lbs. 9oz. NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems. We can not guarantee a fit with plates made by other manufacturers.    NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates!