All

AR500 Silhouette Introducing our AR500 Steel Silhouette Targets, CNC laser cut right here in the USA. Laser cut parts provide consistent & quality products each time and have limited amounts of heat applied to the steel. This is key in preventing any decrease to the steels quality & performance. Lower end targets may be plasma cut,  which is something you want to avoid. These silhouettes are designed for precision shooting practice. Crafted from high-quality AR500 steel, these targets guarantee exceptional durability. The silhouette target is offered in two sizes, both painted and un-painted. Our AR500 silhouettes all include three mounting holes cut to fit a 1/2” carriage bolts.  We offer a variety of ways to hang/mount them so be sure to check them out. Elevate your shooting skills with this reliable and robust steel target, perfect for both novice and experienced marksmen. *Grade 8 hardware is suggested but no hardware is included with silhouette only purchases. Hardware is available for purchase Here. Refer to our Ammo Caliber Chart prior to shooting any Double Tap Industries targets.  CNC Laser Cut 3/8" AR500 Steel Two Paint Options Powder Coated (White for Easy Touchup) Raw (unpainted option) 3 Mounting Hole Locations Made in the USA Double Tap Sticker included

AR500 Steel Gongs These 3/8″ AR500 Steel Gongs are made to last no matter which size target you select.  We have CNC Laser cut our targets, providing you consistent & quality products each time. The importance of CNC cut parts is that it reduces the amount of heat affecting the steel, preventing any decrease in the steels quality & performance. Low end targets could be plasma cut which is not what you're going to want on your range. Designed for precision shooting practice. Crafted from high-quality AR500 steel, this target guarantees exceptional durability. Our gongs all include three mounting holes cut to fit a 1/2” carriage bolt. We offer a variety of ways to hang/mount them so be sure to check them out. Elevate your shooting skills with robust steel targets, perfect for both novice and experienced marksmen. *Grade 8 hardware is suggested but no hardware is included with gong only purchases. Hardware is available for purchase Here. Refer to our Ammo Caliber Chart prior to shooting any Double Tap Industries targets.  Made in the USA CNC Laser cut 3/8" AR500 Steel Two Paint Options Powder Coated (white for easy touchup) Raw (unpainted option) 3 Mounting Hole Locations Double Tap Sticker included

AR500 Steel Gongs These 3/8″ AR500 Steel Gongs are made to last no matter which size target you select.  We have CNC Laser cut our targets, providing you consistent & quality products each time. The importance of CNC cut parts is that it reduces the amount of heat affecting the steel, preventing any decrease in the steels quality & performance. Low end targets could be plasma cut which is not what you're going to want on your range. Designed for precision shooting practice. Crafted from high-quality AR500 steel, this target guarantees exceptional durability. Our gongs all include three mounting holes cut to fit a 1/2” carriage bolt. We offer a variety of ways to hang/mount them so be sure to check them out. Elevate your shooting skills with robust steel targets, perfect for both novice and experienced marksmen. *Grade 8 hardware is suggested but no hardware is included with gong only purchases. Hardware is available for purchase Here. Refer to our Ammo Caliber Chart prior to shooting any Double Tap Industries targets.  Made in the USA CNC Laser cut 3/8" AR500 Steel Two Paint Options Powder Coated (white for easy touchup) Raw (unpainted option) 3 Mounting Hole Locations Double Tap Sticker included

AR500 Steel Gongs These 3/8″ AR500 Steel Gongs are made to last no matter which size target you select.  We have CNC Laser cut our targets, providing you consistent & quality products each time. The importance of CNC cut parts is that it reduces the amount of heat affecting the steel, preventing any decrease in the steels quality & performance. Low end targets could be plasma cut which is not what you're going to want on your range. Designed for precision shooting practice. Crafted from high-quality AR500 steel, this target guarantees exceptional durability. Our gongs all include three mounting holes cut to fit a 1/2” carriage bolt. We offer a variety of ways to hang/mount them so be sure to check them out. Elevate your shooting skills with robust steel targets, perfect for both novice and experienced marksmen. *Grade 8 hardware is suggested but no hardware is included with gong only purchases. Hardware is available for purchase Here. Refer to our Ammo Caliber Chart prior to shooting any Double Tap Industries targets.  Made in the USA CNC Laser cut 3/8" AR500 Steel Two Paint Options Powder Coated (white for easy touchup) Raw (unpainted option) 3 Mounting Hole Locations Double Tap Sticker included

AR500 Steel Gongs These 3/8″ AR500 Steel Gongs are made to last no matter which size target you select.  We have CNC Laser cut our targets, providing you consistent & quality products each time. The importance of CNC cut parts is that it reduces the amount of heat affecting the steel, preventing any decrease in the steels quality & performance. Low end targets could be plasma cut which is not what you're going to want on your range. Designed for precision shooting practice. Crafted from high-quality AR500 steel, this target guarantees exceptional durability. Our gongs all include three mounting holes cut to fit a 1/2” carriage bolt. We offer a variety of ways to hang/mount them so be sure to check them out. Elevate your shooting skills with robust steel targets, perfect for both novice and experienced marksmen. *Grade 8 hardware is suggested but no hardware is included with gong only purchases. Hardware is available for purchase Here. Refer to our Ammo Caliber Chart prior to shooting any Double Tap Industries targets.  Made in the USA CNC Laser cut 3/8" AR500 Steel Two Paint Options Powder Coated (white for easy touchup) Raw (unpainted option) 3 Mounting Hole Locations Double Tap Sticker included

AR500 Steel Gongs These 3/8″ AR500 Steel Gongs are made to last no matter which size target you select.  We have CNC Laser cut our targets, providing you consistent & quality products each time. The importance of CNC cut parts is that it reduces the amount of heat affecting the steel, preventing any decrease in the steels quality & performance. Low end targets could be plasma cut which is not what you're going to want on your range. Designed for precision shooting practice. Crafted from high-quality AR500 steel, this target guarantees exceptional durability. Our gongs all include three mounting holes cut to fit a 1/2” carriage bolt. We offer a variety of ways to hang/mount them so be sure to check them out. Elevate your shooting skills with robust steel targets, perfect for both novice and experienced marksmen. *Grade 8 hardware is suggested but no hardware is included with gong only purchases. Hardware is available for purchase Here. Refer to our Ammo Caliber Chart prior to shooting any Double Tap Industries targets.  Made in the USA CNC Laser cut 3/8" AR500 Steel Two Paint Options Powder Coated (white for easy touchup) Raw (unpainted option) 3 Mounting Hole Locations Double Tap Sticker included

The perfect gift for the marksman in your life - a Double Tap Industries gift card. Give them the freedom to choose from our wide selection of top-quality range products and shooting accessories. Treat them to the gift of choice and let them experience the Double Tap Industries level of excellence.

Static T-Post Hanging Bracket for Steel Targets by Double Tap Ind. Enhance your shooting experience with the Static T-Post Hanging Bracket by Double Tap Industries. Designed for versatility and durability, this heavy-duty bracket fits all standard t-post sizes, providing a secure and stable setup for your steel targets. The 3/8" AR500 steel hook is designed to withstand the impact of high-caliber rounds, ensuring longevity and durability. This t-post hanger is coated in a sleek black powder finish, providing a layer of protection against the elements and giving it a finished look. Its straightforward design makes it easy to set up, making it a perfect choice for both novice and experienced shooters looking for a reliable target-hanging solution. Key Features: Universal Fit: Compatible with all standard t-post sizes for versatile use. Durable Construction: 3/8" AR500 steel hook resists damage from bullet impacts. Weather-Resistant: Black powder coat finish protects against rust and corrosion. Easy Installation: Simple and quick setup for any shooting environment. Upgrade your shooting setup with the Static T-Post Hanging Bracket from Double Tap Industries—where durability meets precision. Ideal for personal ranges, training facilities, and competitive shooting events. Proudly made in the USA!

33% IPSC 3/8" AR500 Steel Silhouette Target - 6" x 10"   Precision Silhouette Shooting Target by Double Tap Industries Elevate your shooting experience with our premium AR500 Steel Silhouette Target, meticulously CNC laser cut in the USA for unmatched precision and durability. Unlike plasma-cut alternatives, laser cutting preserves the integrity of the steel, ensuring consistent performance and extended target life. Designed for shooters of all skill levels, this 3/8" thick AR500 steel target is ideal for precision practice. Whether you're a beginner or an expert, these silhouettes are built to withstand heavy use and provide a reliable shooting surface. Available in both painted and unpainted options, our silhouette targets come with three 1/2” pre-cut mounting holes (intended for carriage bolts) for easy setup. Key Features: CNC Laser Cut from 3/8" AR500 Steel (6" x 10") Available in Two Finishes: Powder Coated White for easy touch-up Raw Steel (unpainted) 3 Mounting Holes for versatile hanging options Made in the USA Double Tap Industries Sticker included *Grade 8 hardware is suggested but no hardware is included with silhouette only purchases. Hardware is available for purchase Here. Please refer to our Ammo Caliber Chart before use. Boost your shooting precision with the reliability and toughness of Double Tap Industries' AR500 steel targets—perfect for your next training session.

Spiked Steel Target 2x4 Stand | Double Tap Industries Elevate your shooting experience with the Spiked Steel Target 2x4 Stand from Double Tap Industries—a premium, USA-made solution designed for shooters. This versatile stand accommodates any standard 2x4, featuring precision height adjustment that allows you to set your targets at varying heights, ideal for regulated shooting sports like Steel Challenge. With its tool-free height adjustment of up to 6 inches, quickly fine-tune your target setup without the need for cutting new 2x4s. The stand’s three-legged base, equipped with spiked feet, ensures exceptional stability on various terrains. Setup and storage are effortless: simply fold back the front arm, pin it, and remove the back legs using the locking pin. For optimal positioning, adjust the front arm in 5-degree increments to achieve the perfect target angle. At the top of the stand, the Harmonic Static 2x4 Steel Target Hanger secures to the 2x4 using a wing nut, minimizing target movement. The hanger utilizes Grade 8 hardware and a spring to mount your steel target securely to the stand, providing clear and responsive feedback with each hit. Finished in powder-coated black, this stand offers weather resistance and a sleek, professional look. Designed for portability and ease of use, the Spiked Steel Target 2x4 Stand is the perfect addition for shooters seeking reliability and adjustability. Proudly made in the USA!

Steel Challenge 18” x 24” Target - 3/8” Rectangle AR500 | Double Tap Ind. Maximize your shooting performance with our 18" x 24" Rectangular Steel Target, expertly crafted from 3/8" AR500 steel. Built to endure constant impact, this versatile target meets Steel Challenge Shooting Association (SCSA) specifications, making it perfect for competitions, range maintenance, and precision shooting practice. Key Features: Heavy-Duty AR500 Steel: Constructed from 3/8" thick AR500 steel, this target withstands repeated shots from high-powered rifles, handguns, and shotguns while maintaining its structural integrity. SCSA-Compliant Size: Measuring 18" x 24", this rectangular target meets SCSA specifications, ensuring you're practicing or competing with regulation-approved equipment. Reactive Impact:Delivers a loud ring and visible movement on every hit, offering instant feedback during training or competition. Steel Challenge Ready:Perfect for Steel Challenge events and other competitive shooting sports, designed to handle the rigors of fast-paced, high-volume shooting. Flexible Mounting Options:Features pre-cut mounting holes designed to fit 1/2" carriage bolts or slide easily onto a hook hanger, simplifying range setup and takedown. Range Maintenance Solution:Ideal for range upkeep, this rectangular target is a great replacement for worn targets, ensuring your shooting range remains compliant and functional. Whether for competition, practice, or range maintenance, our SCSA-compliant 18" x 24" rectangular steel target ensures top-tier performance and long-lasting durability. Proudly made in the USA!

Steel Challenge | Double Tap Ind. Our USPSA/SCSA Steel Challenge packages empower you to select the stage(s) and setup that best fit your needs. Each package is fully compliant with established standards and crafted from high-quality 3/8” AR500 steel, our targets are CNC laser cut. These targets are engineered for both home and competitive ranges, meeting the rigorous demands of Steel Challenge shooting. Designed to endure thousands of rounds from both pistols and rifles, they deliver reliable performance for competitive and casual shooters alike, allowing you to host Steel Challenge stages or complete competitions with confidence. Kit Includes: 3/8” AR500 Steel Targets (target variety dependent on stage selected) (Unpainted/Raw Steel) (Optional +$$) 2x4 Hangers (Optional +$$) 2x4 Bases (Spiked or H-Style) Pick Your Stage: Stage 1: Five to Go Stage 2: Showdown Stage 3: Smoke & Hope Stage 4: Outer Limits Stage 5: Accelerator Stage 6: Pendulum Stage 7: Speed Option Stage 8: Roundabout Practice Stage: Choose 1 of 8 Complete Package: All 8 Stages Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up a stage of the Steel Challenge, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the stage you choose, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Double Tap Industries’ enables customers to set up the Steel Challenge stage of their choosing while ensuring a professional and competition level challenge experience. Proudly made in the USA!

Five to Go – Stage 1 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 1 – Five to Go of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut & built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels, enduring thousands of rounds from both pistols and rifles. Kit Includes: (4) 10” AR500 Round Plates (Unpainted/Raw Steel) (1) 12” AR500 Round Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 1 (Five to Go) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 1 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Five to Go stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Five-Go Stage with confidence in your set up. Double Tap Industries’ Stage 1 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly made in the USA!

Showdown – Stage 2 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 2 – Showdown of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut & built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (2) 10” AR500 Round Plates (Unpainted/Raw Steel) (1) 12” AR500 Round Plate (Unpainted/Raw Steel) (2) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$)   Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 2 (Showdown) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 2 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Showdown stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Showdown Stage with confidence in your set up. Double Tap Industries’ Stage 2 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Smoke & Hope – Stage 3 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 3 – Smoke & Hope of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (1) 12” AR500 Round Plate (Unpainted/Raw Steel) (4) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 3 (Smoke & Hope) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 3 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Smoke & Hope stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Smoke and Hope Stage with confidence in your set up. Double Tap Industries’ Stage 3 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Outer Limits – Stage 4 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 4 – Outer Limits of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (3) 12” AR500 Round Plate (Unpainted/Raw Steel) (2) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 4 (Outer Limits) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 4 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Outer Limits stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Outer Limits Stage with confidence in your set up. Double Tap Industries’ Stage 4 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Accelerator – Stage 5 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 5 – Accelerator of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (1) 10” AR500 Round Plates (Unpainted/Raw Steel) (2) 12” AR500 Round Plate (Unpainted/Raw Steel) (2) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 5 (Accelerator) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 5 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Accelerator stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Accelerator Stage with confidence in your set up. Double Tap Industries’ Stage 5 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Pendulum – Stage 6 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 6 – Pendulum of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (2) 10” AR500 Round Plates (Unpainted/Raw Steel) (3) 12” AR500 Round Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 6 (Pendulum) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 6 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Pendulum stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Pendulum Stage with confidence in your set up. Double Tap Industries’ Stage 6 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Speed Option – Stage 7 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 7 – Speed Option of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (4) 12” AR500 Round Plate (Unpainted/Raw Steel) (1) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 7 (Speed Option) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 7 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Speed Option stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Speed Option Stage with confidence in your set up. Double Tap Industries’ Stage 7 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Roundabout – Stage 8 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 8 – Roundabout of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (5) 12” AR500 Round Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 8 (Roundabout) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 8 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Roundabout stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Roundabout Stage with confidence in your set up. Double Tap Industries’ Stage 8 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Practice – Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is a great way to practice and enables you to setup any 1 of the 8 stages of the Steel Challenge Shooting Association's competition series (Showdown, Smoke & Hope, Outer Limits, Speed Option, The Pendulum, 5 to Go, Roundabout or Accelerator). This package provides everything you need to set up a stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (4) 10” AR500 Round Plates (Unpainted/Raw Steel) (5) 12” AR500 Round Plate (Unpainted/Raw Steel) (4) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up 1 of 8 Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Practice setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Practice (1 of 8) stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run any stage of the Steel Challenge with confidence in your set up. Double Tap Industries’ Practice option enables customers to setup the Steel Challenge stage of their choosing while ensuring a professional and competition level challenge experience. Proudly Made in the USA!

Complete Steel Challenge Shooting Targets | Double Tap Ind. Our USPSA/SCSA Steel Challenge package provides everything you need to set up all of the stages for the USPSA’s Steel Challenge Shooting Association competition series, fully compliant with established standards. Crafted from high-quality 3/8” AR500 steel, our targets are CNC laser cut and engineered for both home and competitive ranges, meeting the rigorous demands of Steel Challenge shooting. Designed to endure thousands of rounds from both pistols and rifles, these targets deliver reliable performance for both competitive and casual shooters, enabling you to host Steel Challenge stages or complete competitions with confidence. Stages Included: Stage 1: Five to Go Stage 2: Showdown Stage 3: Smoke & Hope Stage 4: Outer Limits Stage 5: Accelerator Stage 6: Pendulum Stage 7: Speed Option Stage 8: Roundabout Kit Includes: (9) 10” AR500 Round Plates (Unpainted/Raw Steel) (20) 12” AR500 Round Plate (Unpainted/Raw Steel) (11) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (40) 2x4 Hangers (Optional +$$) (40) 2x4 Bases (Optional +$$)   Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up all the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability across varying terrains. This collapsable stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Our versatile stand fits any standard 2x4 and allows for target height adjustability. Secure the hanger and bases to your 2x4’s with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All stand components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge setup but worried about breaking the bank? This all-inclusive Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for a complete setup, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, this option allows you to use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. With this package, you can confidently set up and run All Stages of the Steel Challenge, ensuring a professional and competition level Steel Challenge experience. Proudly made in the USA!