Tactical Scorpion Gear For Voodoo Tactical 20-9099 Vest Carrier IIIA 3A Soft Body Armor Plate Inserts
$281.99
$319.99
Tactical Scorpion Gear IIIA Soft Armor inserts for the Voodoo 20-9099 series Tactical Heavy Plate Carrier vest.
( Carrier vest displayed in photos is not included)
Tactical Scorpion Gear helps you take your Voodoo Tactical armor plate carrier to the next level with these level IIIA soft armor inserts custom designed to fit the Voodoo Tactical Lightweight plate carriers.
This set of two soft inserts provides protection to Level IIIA NIJ standards.
These inserts measure at 16" X 25" and 14" x 25" providing far more coverage than the standard 10x12 plates.
Custom made by our craftsmen, our armor inserts fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates.
They may be used as stand-alone level IIIA protection or behind your hard plates, adding extra protection from spalling and trauma.
With a weight of approximately 4.3 pounds, they are significantly lighter than steel plates and can be comfortably worn for long periods of time.
Features
This is a set of matching front and back stand-alone armor panels with multiple hit capability
Made in the USA
Lightweight, soft, flexible, comfortable material
Inserts are custom made to fit the Voodoo Tactical Heavy Carrier vest, model number 20-9099
7/16" thick
Fully tested by independent lab
Rated for up to six hits from .44 magnum bullets
Two panels provide both front and back protection and limited side protection
Plate panel Sizes:
Here at Tactical Scorpion Gear we manufacture our own vest carriers, level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping.
** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
Item Specifications
Type: Plates
Threat Level Rating: III-A
Color: Black
Style: Soft Level IIIA Body Armor Plates
Model: Voodoo 20-9099 Vest Body Armor Plates
Tactical Scorpion Gear For Voodoo Tactical 20-0097 Vest Carrier IIIA 3A Soft Body Armor Plate Inserts
$187.99
$213.99
Tactical Scorpion Gear IIIA Soft Armor inserts for the Voodoo 20-0097 series Hayden Tactical Plate Carrier vest.
( Carrier vest displayed in photos is not included)
Tactical Scorpion Gear helps you take your Voodoo Tactical armor plate carrier to the next level with these level IIIA soft armor inserts custom designed to fit the Voodoo Tactical Lightweight plate carriers.
This set of two soft inserts provides protection to Level IIIA NIJ standards.
These inserts measure at 15" X 16" providing far more coverage than the standard 10x12 plates.
Custom made by our craftsmen, our armor inserts fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates.
They may be used as stand-alone level IIIA protection or behind your hard plates, adding extra protection from spalling and trauma.
With a weight of approximately 2.8 pounds, they are significantly lighter than steel plates and can be comfortably worn for long periods of time.
Features
This is a set of matching front and back stand-alone armor panels with multiple hit capability
Made in the USA
Lightweight, soft, flexible, comfortable material
Inserts are custom made to fit the Voodoo Tactical Hayden Carrier vest, model number 20-0097
7/16" thick
Fully tested by independent lab
Rated for up to six hits from .44 magnum bullets
Two panels provide both front and back protection and limited side protection
Plate panel Sizes:
Here at Tactical Scorpion Gear we manufacture our own vest carriers, level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping.
** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
Item Specifications
Type: Plates
Threat Level Rating: III-A
Color: Black
Style: Soft Level IIIA Body Armor Plates
Model: Voodoo 20-0097 Vest Body Armor Plates
Tactical Scorpion Gear Level IIIA Aramid Body Armor Hard Curved 11 x 14 Plate
$116.95
$142.94
Level IIIA Body Armor Hard Aramid Curved 11" x 14" Plate - Stops .44 Magnum MADE IN USA
Tactical Scorpion Gear takes the Level IIIA armor plate to the next level with our new hard curved plate. These only weigh 18 ounces each!
Fits your body profile much better than the flat hard armor plates .
Tactical Scorpion Gear Level IIIA Curved hard plate armor .
This is a curved Level IIIA hard plate not available anywhere else only weighing 14 ounces .
A stand alone armor plate with multiple hit capability 600D cover with padded edges Will fit most common carrier vests ( We manufacturer a full line of carrier vests) Laminated Kevlar formed in our factory to make a curved hard plate Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets with velocities up to 1464 fps For front and/or back protection Plate Size: 11" x 14"
Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping.
Rated for up to six hits from .44 magnum bullets with velocities up to 1464 fps. Will withstand multiple hits from all pistol calibers.
Tested by HP White laboratory
** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
NIJ tested Level IIIA Armor will defeat 6 pistol round shots up to .44 magnum @ 1474 ft/s @ 17.3 FT.
We only manufacture our plates from Dupont Kelvar.
TERMS AND CONDITIONS
By purchasing the body armor contained in this listing from East West Consolidated, LLC, d/b/a Tactical Scorpion Gear (“Seller”), you (“Purchaser”) agree to be bound by the following terms and conditions: Purchaser represents that s/he is at least 18 years old or the age of majority in the State or Territory in which s/he resides. Purchaser is not a convicted felon at the time of purchase. Seller will not sell body armor to any citizen or resident of the State of Connecticut. Purchaser is legally allowed to purchase, possess, and/or use the purchased item(s) in Purchaser’s State/Territory, County/Parish, and municipality, and affirms that such purchase does not violate any federal, state, or local laws. Seller makes no representations to Purchaser about the legality of any Purchase of body armor. Seller makes no representations about the consequences to Purchaser in the event Purchaser buys the body armor in contravention of any applicable federal, state, or local law. Purchaser is encouraged to seek qualified legal counsel in his/her jurisdiction if Purchaser has any questions concerning ab federal, state, or local laws. Seller is not responsible for Purchaser’s violation of any federal, state, or local law concerning the Purchaser’s purchase, use, re-sale, other distribution of any body armor obtained from Seller. This disclaimer applies to any re-distribution within or outside of the United States. Seller will cooperate with any federal, state, or local law enforcement agency investigating the purchase or use of body armor by the Purchaser. Purchaser is not buying the body armor on behalf of another person in an effort to avoid compliance with these Terms and Conditions or to circumvent any applicable federal, state, or local law.
13
Caliber Armor AR550 Level III+ Active Shooter Response Package
from $260.00
$264.76
AR550 Level III+ Steel Body Armor Plate with standard coating to protect the plate from the elements. This package does not have Spall Coating. If you would like this package with Bullet Liner Spall Coating.
Ergonomic Multi-Curve design at no extra cost
Standard coating to protect against the elements
Shooters Cut
Rated and tested to: NIJ STD-0101.06 Level III and special threats listed in NIJ STD-0101.07 Draft Rifle 2
Proudly made in the U.S.A
Features
Emergency drag handle
Removable anti-slip shoulder pads, with hook and loop guides
Adjustable shoulder straps
MOLLE webbing for modular attachments
Hook and loop webbing
Breathable 3D Mesh liner
Quick release buckles
Easy access plate pockets
Accepts Caliber Armor AR550 Steel Plates in 10″ x 12″
Size: : Adjustable sizing from 32″ – 54″ waist size
Available in:OD GreenBlackCoyote BrownScorpion OCP
AR550 Multi-Curve Steel Body Armor Plates
AR550 Level III+ Steel Body Armor Plate with standard coating to protect the plate from the elements. This package does not have Spall Coating. If you would like this package with Bullet Liner Spall Coating.
Ergonomic Multi-Curve design at no extra cost
Standard coating to protect against the elements
Shooters Cut
Rated and tested to: NIJ STD-0101.06 Level III and special threats listed in NIJ STD-0101.07 Draft Rifle 2
Proudly made in the U.S.A
We have gone above and beyond to bring you steel body armor of a HIGHER CALIBER.
This can be seen with our bend process, our fragmentation coating and our finishing details. This was the material that we started from and have the most experience with. We’ve seen it, done it, we’ve improved it.
Steel Body Armor provides great protection that can stop multiple projectile hits. We have been working with different levels of abrasion resistant (AR) ballistic steel for years and have not found a better product than our AR550 Steel Body Armor Plates. This armor is rated at a level III+ as it can defeat special threats like M855 rounds.
All of our steel plates come in one ergonomic curve option. We have worked with LE and first responders to design a curve that you can be comfortable wearing. We provide this at no additional cost. What is unique about the way that we bend our steel is important too. We have designed a press that creates a multi curve bend in ONE step. Why is this important? When you do multiple bends to achieve a multi curve, it puts extra strain on the plate which can weaken it. We have replicated the same curves that you have seen in multi curve ceramic armor for years.
Our aggressive Shooters Cut body armor plates shaves off weight while still providing enough coverage to protect your vital organs. Use our CaliberX™ Soft Armor Backers for even more protection and comfort.
Our standard AR550 plate comes coated to protect the plate from rust and the elements. One concern with Steel Armor is fragmentation containment. Some of that fragmentation is contained in the armor’s plate carrier, but there still is a risk of lethal shrapnel. We HIGHLY recommend our Caliber Anti-Spall add on. We have teamed up with our friends at Bullet Liner® to formulate an anti-spall coating specifically for our armor application. This addition to your steel plate gives you peace of mind when wearing steel armor.
Click HERE to see this product with the Advanced Spall and Fragmentation Protection
Weights for AR550 Steel Body Armor:
10 x 12 – 7lb 6 oz
NIJ STANDARD-0101.06
Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 Level III and also tested for special threats listed in the draft NIJ Standard- 0101.07 Rifle 2.
MANUFACTURING TOLERANCES:
Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%.
Sentry Plate Carrier
Caliber Armor offers the Sentry Plate Carrier by Condor Outdoor because it one of the highest selling plate carriers on the market. For good reason, as it is widely used by law enforcement throughout our country. It is designed for modular attachments with quick release and cinch buckles. This carrier accepts Caliber Armor AR550 Steel Body Armor Plates in 10” x 12”. This package is is perfect for rapid response situations or to add to your workout routine.
Features
Emergency drag handle
Removable anti-slip shoulder pads, with hook and loop guides
Adjustable shoulder straps
MOLLE webbing for modular attachments
Hook and loop webbing
Breathable 3D Mesh liner
Quick release buckles
Easy access plate pockets
Accepts Caliber Armor AR550 Steel Plates in 10″ x 12″
Size: : Adjustable sizing from 32″ – 54″ waist size
Available in:OD GreenBlackCoyote BrownScorpion OCP
Caliber Armor CaliberX Covert Body Armor Vest
from $413.91
$495.96
Sizing for Caliber X™ Covert Body Armor Vest:
Measure your waist with a soft measuring tape from your navel all the way around. You will want to make sure that you order the size that is equal to or more than that measurement. When in doubt go a size up to avoid any gap.
Small: Maximum 33″
Medium-Large: Maximum 41″
Large-2 XL: Maximum 51″
3-4 XL: Maximum 60″
Smaller and larger sizes can be custom made. Please inquire for more details.
All of our CaliberX™ soft armor thinness is .19 in. and weigh just over 1 lb. per sqft.
Small: 3.33 lb
Medium-Large: 4 lb
Large-2XL: 5.67 lb
3XL-4XL: 6.89 lb
Caliber Armor CaliberX Covert Body Armor Vest
At Caliber Armor, we are always striving to offer our customers the best possible protection combined with maximum comfort, low weight and competitive pricing. Introducing our CaliberX™ Covert Body Armor Vest. This fully concealable body armor setup starts with high tech Kevlar XP para-aramid material and is finished with a minimalist carrier that produces a light and flexible concealable body armor platform that can be worn comfortably through long shifts.
All CaliberX™ body armor is NIJ 0101.06 Level IIIA and 0101.07 RF2 rated to stop multiple hits from most pistol and shotgun rounds including .44 Magnum, .357 Sig, and .9 mm. This full coverage soft armor option can be worn flush together or overlapped for maximum side protection. It is designed to be worn under street clothes or uniforms for an extended period of time. This is the choice for departments looking for an extremely concealed and comfortable solution.
Our simplistic functional carrier is thin, breathable and has multiple adjustment options. It allows the armor to lay smooth under clothing to avoid being obvious that you are wearing body armor. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death.
Designed to be worn under uniform or street clothes for undercover operations. This maximum conceal ability allows you to pass without others being fully aware that you are wearing ballistic protection.
All of our armor products can be worn by men or women. Due to the thinness and flexibility it is easily concealable even on those with smaller frames. We have a size for you.
Beware of any armor that does not list or boast about where it’s made (it’s probably Chinese). If they don’t tell you how thick or heavy, it is (it’s heavy and bulky)! We strive for transparency at Caliber Armor. If you ever have any questions about our armor, we are a quick email or call away. Any product that we put our name on is proudly designed and made in the U.S.A
Sizing for Caliber X™ Covert Body Armor Vest:
Measure your waist with a soft measuring tape from your navel all the way around. You will want to make sure that you order the size that is equal to or more than that measurement. When in doubt go a size up to avoid any gap.
Small: Maximum 33″
Medium-Large: Maximum 41″
Large-2 XL: Maximum 51″
3-4 XL: Maximum 60″
Smaller and larger sizes can be custom made. Please inquire for more details.
All of our CaliberX™ soft armor thinness is .19 in. and weigh just over 1 lb. per sqft.
Small: 3.33 lb
Medium-Large: 4 lb
Large-2XL: 5.67 lb
3XL-4XL: 6.89 lb
Caliber Armor CaliberX Ultra Light Weight Soft Armor With Concealment Carrier
from $341.92
$348.17
Soft Body Armor Panel available in 10×12 and 11×14 options
SAPI style cut
Lightweight CaliberX™ 10×12 15.8oz, 11×14 1lb 4oz
Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2
Waterproof
Interior sewn together for longevity
Proudly made in the U.S.A
Features
Removable cummerbund with double layer Mil-Spec Velcro®
Two (2) internal pouches on each side of cummerbund
Fully adjustable shoulder straps
Large soft side Velcro® area for placards
Made with Mil-Spec IR Treaded 500D Cordura®
Mil-Spec IR Treated Murdock Webbing®
All of the fabrics, webbing and plastic hardware are treated at source to deliver the lowest I.R. signature possible
Weight 1 lb
Available in: Black, Coyote Tan, Ranger Green and MultiCam®
The Low-Visibility Plate Carrier is made with high quality U.S. Mil-Spec sourced materials and designed by U.S. Veterans.
Sizing:Regular: Fits 10×12” plates or soft armor panelsX-Large: Fits 11×14 plates or soft armor panels
Caliber Armor CaliberX Ultra Light Weight Soft Armor With Concealment Carrier
Soft Body Armor Panel available in 10×12 and 11×14 options
SAPI style cut
Lightweight CaliberX™ 10×12 15.8oz, 11×14 1lb 4oz
Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2
Waterproof
Interior sewn together for longevity
Proudly made in the U.S.A
Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density.
We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death.
CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest.
CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma.
Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm.
CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing.
NIJ STANDARD-0101.06 and .07
Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2
MANUFACTURING TOLERANCES:
Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%.
Low-Visibility Plate Carrier
This Low-Visibility Plate Carrier is low profile and designed to endure and outlast any mission. It is fully adjustable for size, comfort, and protection. The sides are made from double layer Mil-Spec elastic and incorporates two internal pouches on each side which can hold magazine pouches and/or communication tools. The shoulder and sides of the Low-Visibility Plate Carrier are fully adjustable with Velcro® closures.
Features
Removable cummerbund with double layer Mil-Spec Velcro®
Two (2) internal pouches on each side of cummerbund
Fully adjustable shoulder straps
Large soft side Velcro® area for placards
Made with Mil-Spec IR Treaded 500D Cordura®
Mil-Spec IR Treated Murdock Webbing®
All of the fabrics, webbing and plastic hardware are treated at source to deliver the lowest I.R. signature possible
Weight 1 lb
Available in: Black, Coyote Tan, Ranger Green and MultiCam®
The Low-Visibility Plate Carrier is made with high quality U.S. Mil-Spec sourced materials and designed by U.S. Veterans.
Sizing:Regular: Fits 10×12” plates or soft armor panelsX-Large: Fits 11×14 plates or soft armor panels
Predator Armor Utility Pouch
$36.00
$40.74
Features:
1000D Cordura Construction
Minimal Space Requirement (6.5" x 3" x 5")
Pocket Sleeve for item separation
MOLLE and Belt compatible
Predator Armor Utility Pouch
100% made in the USA -- the Utility Pouch can be used to house any of your tactical gear needs. At approximately 6.5" x 3" x 5" and 3.4 oz in weight- this pouch takes up minimal space while giving you a perfect pouch to carry any general items needed.
Made from 1000D cordura it is built to last. Laser cut MOLLE on the back allows attachment to your MOLLE/PALS system. It is also belt compatible so you can attach if you do not have a MOLLE/PALS set up. Tactical zipper accross the top allows for easy open and closing to secure your gear inside.
Features:
1000D Cordura Construction
Minimal Space Requirement (6.5" x 3" x 5")
Pocket Sleeve for item separation
MOLLE and Belt compatible
Made in the USA
Predator Armor Dump Pouch
$36.00
$40.74
Features:
1000D Cordura construction
Minimal space required (3"x3"x2")
Large enough for 9 AR mags
MOLLE and belt compatible
Predator Armor Dump Pouch
If you need a place for your spent mags or other items then the folding dump pouch is perfect for your needs. It folds up to so it does not consume valuable MOLLE channels or belt space. At approximately 3" x 3" x 2" it will take up minimal space. When unrolled it is large enough to hold 9 AR mags or similar sized items.
Made from 1000D cordura it is built to last. Laser cut MOLLE on the back allows attachment with your MOLLE/PALS system. It is also belt compatible so you can attach if you don't have a MOLLE/PALS set up. Bungee cord lock at top for closure, securing your gear inside.
Features:
1000D Cordura construction
Minimal space required (3"x3"x2")
Large enough for 9 AR mags
MOLLE and belt compatible
Made in the USA.
2
Shellback Tactical Skirmish Active Shooter Kit with Level IV 1155 Plates
from $424.99
$600.90
The Shellback Tactical Skirmish Active Shooter Armor Kit with Level IV 1155 Plates is tactical armored kit solution to being prepared for an active shooter situation. This complete kit features the Skirmish Plate Carrier and two level IV model 1155 hard armor plates.
Shellback Tactical Skirmish Active Shooter Kit with Level IV 1155 Plates
Kit Components
Shellback Tactical Skirmish Plate Carrier x 1
Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2
Skirmish Plate Carrier Features
500 Denier Nylon
Low profile design for mobility
3D Spacer mesh padding for comfort
Front kangaroo pouch
Fully adjustable shoulder straps to fit most sizes
Fully adjustable cummerbund to fit most sizes
Heavy duty par tacking at key stress points
Fits 10 x 12 shooter cut plates
Lifetime Warranty
Imported
Level IV Model 1155 Plate Features
NIJ level IV threat protection
NIJ 0101.06 certified and listed on NIJ CPL list
Multi-Hit Rated
Single Curve
10" x 12" SAPI cut
Weight - 8.2lbs
Stand alone protection
600 denier Cordura nylon exterior cover
Constructed of ceramic face with composite backing
Made in the USA
10 Year warranty
Stopping Power
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
M855/SS109
7.62x54R API
7.62x63 M2AP
Legal
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Shellback Tactical Shield 2.0 Active Shooter Kit with Level IV 4S17 Plates
from $474.99
$569.99
SHELLBACK TACTICAL SHIELD 2.0 ACTIVE SHOOTER KIT WITH LEVEL IV 4S17 PLATES
Kit Components
Shellback Tactical Shield 2.0 Plate Carrier x 1
Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2
Shield 2.0 Plate Carrier Features
Constructed of durable 500 denier nylon
Holds 10" x 12" shooter or SAPI cut ballistic plates
Lightweight laser cut MOLLE platform to customize kit with MOLLE pouches
Low profile minimalist design for mobility
3D Spacer mesh shoulder pads for comfort
Fully adjustable shoulder straps to fit most sizes
Fully adjustable cummerbund to fit most sizes
Heavy duty par tacking at key stress points
Loop panels on front and rear for ID placards and morale patches
Rear drag handle
Lifetime Warranty
Imported
Level IV Model 4S17 Plate Features
NIJ threat level IV
NIJ 0101.06 Certified
DEA Compliant
Listed on NIJ compliant products list
Weight 7.2lbs
Stand alone protection
Single Curve
Single Plate
10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"
Thickness - .95"
Multi-hit rated
M2AP - 3 Rounds
M80 Ball, Steel - 3 Rounds
M43 MSC PS - 3 Rounds
M855 Ball - 3 Rounds
223 REM - 3 Rounds
1000 denier Cordura nylon exterior cover
Constructed of ceramic face with composite backing
10 year ballistic warranty
USA Made - Berry compliant
Stopping Power
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
M855/SS109
7.62x54R API
7.62x63 M2AP
Shellback Tactical ID Placard - SWAT
from $7.33
$10.99
Shellback Tactical 2 x 5 Inch ID Placard with Hook Back
The Shellback Tactical 2 x 5 Inch ID Placard with hook back allows you to easily display your agency or unit information for positive ID. These patches come with hook backing for easy application on to the loop of plate carriers, bags and jackets!
Shellback Tactical 2 x 5 Inch ID Placard Features
Fits perfectly on the Shellback Banshee, Banshee Elite, Patriot, Stealth and Defender Active Shooter Kit.
2 x 5 Inches
Heat fused block text
Hook backing
Constructed of 500 denier Cordura fabric
Water and fade resistant
Extremely durable
CUSTOMER MUST SEND A COPY OF A DEPARTMENT ISSUED OR MILITARY ID IF PURCHASING THE FOLLOWING PLACARDS: POLICE, SHERIFF, DEPUTY SHERIFF, SWAT or SRT.
PLEASE SEND COPY OF ID TO CUSTOMERS@SHELLBACKTACTICAL.COM!
Shellback Tactical ID Placard - SWAT
from $8.00
$12.99
Shellback Tactical 3 x 7 Inch ID Placard with Hook Back
The Shellback Tactical 3 x 7 Inch ID Placard with hook back allows you to easily display your agency or unit information for positive identification. These placards all come with hook backing to fit loop on plate carrier, bags, jackets and more!
Shellback Tactical 3 x 7 Inch ID Placard Features
3 x 7 Inch
Hook backing
Constructed of 500 denier Cordura fabric
Heat fused block text
Water and fade resistant
Fits perfect on the Shellback Banshee Elite, Patriot and Defender Active Shooter Kit.
CUSTOMER MUST SEND A COPY OF A DEPARTMENT ISSUED OR MILITARY ID IF PURCHASING THE FOLLOWING PLACARDS: POLICE, SHERIFF, DEPUTY SHERIFF, SWAT or SRT.
PLEASE SEND COPY OF ID TO CUSTOMERS@SHELLBACKTACTICAL.COM!
1
Shellback Tactical Shield 2.0 Active Shooter Kit with Level IV 1155 Plates
from $413.40
$606.00
SHELLBACK TACTICAL SHIELD 2.0 ACTIVE SHOOTER KIT WITH LEVEL IV 1155 PLATES
Kit Components
Shellback Tactical Shield 2.0 Plate Carrier x 1
Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2
Shield 2.0 Plate Carrier Features
Constructed of durable 500 denier nylon
Holds 10" x 12" shooter or SAPI cut ballistic plates
Lightweight laser cut MOLLE platform to customize kit with MOLLE pouches
Low profile minimalist design for mobility
3D Spacer mesh shoulder pads for comfort
Fully adjustable shoulder straps to fit most sizes
Fully adjustable cummerbund to fit most sizes
Heavy duty par tacking at key stress points
Loop panels on front and rear for ID placards and morale patches
Rear drag handle
Lifetime Warranty
Imported
Level IV Model 1155 Plate Features
NIJ level IV threat protection
NIJ 0101.06 certified and listed on NIJ CPL list
Multi-Hit Rated
Single Curve
10" x 12" SAPI cut
Weight - 8.2lbs
Stand alone protection
600 denier Cordura nylon exterior cover
Constructed of ceramic face with composite backing
Made in the USA
10 Year warranty
Stopping Power
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
M855/SS109
7.62x54R API
7.62x63 M2AP
Legal
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Shellback Tactical Rip Away Individual First Aid (IFAK) Medic Pouch
from $31.99
$39.99
Shellback Tactical Rip Away Medic Pouch
The Shellback Tactical Rip Away Medic Pouch is designed to quickly utilize the pouch in place or tear it away for easier access or transfer of supplies in critical situations. The pouch features a tri-fold design with multiple interior pockets and elastic loops. Perfect to hold all of your medical gear such as tourniquets, compression bandages and chest seals. Stay protected and order your Shellback Tactical Rip Away Medic Pouch today.
In the high-stakes world you operate in, where danger lurks around every corner, there's something that doesn’t get the spotlight it deserves.
It’s the unsung hero tucked in your gear – the tactical medical kit.
Now, I'm not talking about those little boxes with just band-aids and aspirin.
No sir, I’m talking about a real game-changer, the kind of stuff that spells the difference between a close call and a disaster.
Picture this: you're out there in the thick of it, and things get hairy.
That’s when a nifty little lifesaver like the Shellback Tactical Rip Away Medic Pouch can be a real godsend.
This bad boy is not just another pouch – it’s your best buddy in a crunch.
Quick to open, easy to access, and packed with places for all your life-saving gear. We're talking tourniquets, bandages, the works.
You know how it is – when the going gets tough, the tough need to be ready.
And ready means having your gear in order, especially the kind that can save your skin.
This pouch?
It’s like that trusty sidearm you can't do without.
Straps right on, rips right off.
No fumbling, no wasting precious seconds.
In your line of work, being prepared isn’t just smart – it’s essential.
And that’s why gear like the Shellback Tactical Rip Away Medic Pouch isn’t just equipment.
It’s a lifeline.
So, when you're gearing up for the next call, remember the silent guardian in your arsenal – the tactical medical kit.
Specifications
Constructed of durable 500 denier nylon
Compatible with all MOLLE systems
Quick rip away deployment design
Wide handle for carrying or rapid removal
1 inch front security strap to keep pouch in place
Tri-fold design to easily locate supplies
Duel u-shaped zipper with 550 cord pull tabs
Elastic dividers hold medical supplies in place
Elastic loops for bandages, tourniquets, and other equipment
2 snap locking webbing straps on back for attachment to PALS webbing
Exterior loop panel to add ID patches or nametapes
Reverse stitching and bar tacking sewing for enhanced durability
Medical supplies not included
Lifetime warranty
Imported
Dimensions 8"T x 6"W x 3.5"D
Weight - 12 oz
Shellback Tactical Riggers Belt
$17.32
$26.47
Shellback Tactical Riggers Belt
The Shellback Tactical Riggers Belt is constructed of extremely durable nylon webbing and features a forged steel pass through buckle. Despite being extremely tough and durable, this belt is designed to be comfortable to wear on long missions. Tactically versatile, it can be used for everything from rappelling to attaching gear to your person. Knowing that you and your gear are secure, you can focus on whatever your mission entails. Keep your pants from falling down and order your Shellback Tactical Riggers Belt today!
Specifications
1¾" nylon webbing with a 7,000 tensile strength
Forged steel buckle with a 2,000 tensile strength
Hook-and-loop tab keeps buckle secure and prevents catching when not in use
Available in black and coyote tan 499
Imported
Lifetime warranty
Sizing
Medium -28" to 35" Waist
Large - 35" to 40" Waist
Xlarge - 40" to 51" Waist
1
Shellback Tactical Prevail Series Level III Single Curve 10 x 12 Hard Armor Plate - Model LON-III-P
$346.72
$468.50
Shellback Tactical Prevail Series 10 x 12 Inch Stand Alone Level III Hard Armor Plate Model LON-III-P
The Shellback Tactical Level III Hard Armor Plate Model LON-III-P provides level III threat protection weighing in at just 3.5lbs. This plate is constructed of ultra high weight molecular polyethylene (UHWMP) and comes with a 5 year ballistic warranty. This plate is NIJ 0101.06 certified and listed on the NIJ Compliant Products list. Stay quick, lightweight and protected and order your Shellback Tactical Level III Hard Armor Plate Model LON-III-P today.
SPECIFICATIONS
NIJ threat level III
NIJ 0101.06 Certified
Listed on NIJ Compliant Products List
10"W x 12"L x 1.1"W
Weight 3.5 LBS
Single Curve
ESAPI/SAPI cut
UHWMP construction - ultra high weight molecular polyethylene
Multihit rated
600 Denier water resistant cover
Positive Buoyancy
USA Made
10 Year Ballistic Warranty
ROUNDS DEFEATED
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
LEGAL
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Shellback Tactical Pen Holder Patch Set of 2
$10.66
$16.29
Shellback Tactical Pen Holder Patch - Set of 2
The Shellback Tactical Pen Holder Patch is the perfect way to add additional pen storage to your uniform, plate carrier or bag. This durable patch holds three pens and easily attaches to any loop platform. A large external Multicam loop panel allows for unit or command patches. Keep your pens organized in a convenient location and order your Shellback Tactical Pen Holder Patch today!
Specifications
Set of two
Genuine Multicam
Constructed of durable 500D nylon
Three slots for pens or pencils
Hook backing holds patch securely in place
External multicam loop to allow attachment of unit or command patches
6 inches tall by 3.5 inches wide
Lifetime warranty
Imported
Shellback Tactical Medic Pouch
from $17.99
$21.99
Shellback Tactical Medic Pouch
The Shellback Tactical Medic Pouch is designed specifically to keep all of your combat medical supplies. This pouch is fully MOLLE compatible and perfect to organize your combat gauze, compression bandages, quikclot, tourniquets and more. This pouch can be easily attached to any Shellback Tactical plate carrier, tactical bag or tactical belt. Be ready for fight, order your Shellback Tactical Medic Pouch today!
Specifications
Constructed of durable 500 denier nylon
Compatible with all MOLLE systems
Duel u-shaped zipper with 550 cord pull tabs
Elastic dividers hold medical supplies in place
Elastic loops for bandages, tourniquets, and other equipment
2 snap locking webbing straps on back for attachment to PALS webbing
Reverse stitching and bar tacking sewing for enhanced durability
Medical supplies not included
Lifetime warranty
Imported
Dimensions 7"T x 5"W x 2.5"D
Weight - 6 oz
Shellback Tactical Level IIIA PASGT Ballistic Helmet
$326.72
$387.02
Shellback Tactical Level IIIA Ballistic PASGT Helmet
The Shellback Tactical Level IIIA Ballistic PASGT Helmet provides ballistic protection against handgun ammunition. The PASGT or Personnel Armor System for Ground Troops helmet, has been used for many decades by military and law enforcement personnel all across the world. This basic helmet features adjustable three point harness, cushioned leather headband and the ability to attach a face shield. Stay protected and purchase your Shellback Tactical Level IIIA Ballistic PASGT Helmet today.
Specifications
PASGT - Personnel Armor System for Ground Troops helmet
Designed according to the latest US Military requirements
Level IIIA ballistic protection against hand gun rounds
Meets NIJ Standard 0101.06
Kevlar ballistic fiber construction
Adjustable 3 Point US PASGT harness
5 Year Ballistic Warranty
Sizing
Circumference is measured around head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes.
Medium
Circumference - 21.9" to 22.7"
Hat Size - 6 7/8 - 7 1/8
Weight - 2.9 lbs
Large
Circumference - 22.7" to 24"
Hat Size - 7 1/4 - 7 3/8
Weight - 3.1 lbs
XLarge
Circumference - 24" to 26"
Hat Size - 7 1/2 to 7 3/4
Weight - 3.3 lbs
Rounds Defeated
.357 SIG FMJ
9MM
.38
.40 S&W
.44 MAG
Legal
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Shellback Tactical Flashlight Pouch
from $11.99
$13.99
Shellback Tactical Flashlight Pouch
The Shellback Tactical Flashlight Pouch is designed to fit most tactical flashlights from the best brands such as Surefire, Streamlight and 5.11. Highly modular, this pouch can be attached to plate carriers, battle belts and tactical backpacks. Make sure you have a flashlight on your kit and order the Shellback Tactical Flashlight Pouch today!
Specifications
Constructed from durable 500 denier nylon
Compatible with all MOLLE systems
1 snap locking webbing strap on back to attach to PALS webbing
Pouch is perfect for tactical flashlights, pistol magazines and multitools
Strap ensures the light is securely cinched to the pouch for secure storage
Lifetime warranty
Imported
Dimensions - 5'T x 2"W x 1.5"D
Weight - 1 OZ
Shellback Tactical Dump Pouch
from $17.99
$19.99
Shellback Tactical Dump Pouch
The Shellback Tactical Dump Pouch is a super low profile pouch that quickly deploys by a single pull tab. This dump pouch features a dual u-shaped zipper with a one inch pull tab that releases a secondary 260 cubic inch bag to hold empty magazines. The secondary bag features a drawstring closure that secures the contents in the pouch while the pouch is secured to webbing or a belt via nylon straps with hook closure. Once your mission is complete, the secondary bag can be folded up and tucked back into the pouch for the next mission. Always have a way to carry spent mags with the Shellback Tactical Dump Pouch. Order today!
Specifications
Constructed of durable 500 denier nylon
Molle compatible
3 inch slide through belt slot
Dual u-shaped zipper with 550 cord pull tabs
1 inch nylon pull tab to quickly deploy secondary bag
260 cubic inch secondary bag to hold magazines
Secondary bag features drawstring closure to secure contents
Drain hole bottom grommet
Reverse stitching and bar tacking sewing for enhanced durability
Imported
Closed Dimensions: 5"T x 3.5"W x 1"D
Weight - 3oz
Shellback Tactical Defender 2.0 Active Shooter Armor Kit with Level IV Model 1155 Armor Plates
$413.40
$611.09
Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 1155 Plates
The Shellback Tactical Defender 2.0 Active Shooter Armor Kit with Level IV 1155 Plates is your complete armored kit answer to being prepared for an active shooter situation. This complete kit is packed with features - Fully adjustable lightweight carrier, two model 1155 level IV armor plates and a convenient carry bag for storage. Stay protected and order your Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 1155 Plates today!
Kit Components
Shellback Tactical Defender 2.0 Plate Carrier x 1
Shellback Tactical Kit Carrying Bag x 1
Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2
Defender 2.0 Plate Carrier Features
Constructed of durable 500 denier Nylon
Holds 10 x 12 shooter cut plates
Lightweight laser cut molle
Fully adjustable side straps and shoulders
One size fits most
Integrated padded shoulder pads for comfort
Front and back molle loop panels for placards and patches
Two integrated kangaroo M4 magazine pouches with bungee retention
One integrated tourniquet pouch marked with a red tab for easy identification
Drag handle on the rear
Lifetime warranty
Imported
Kit Carrying Bag
Constructed of 500 denier nylon
Bag will hold Shellback Defender 2.0 Plate Carrier, plates and magazines
Two carrying straps
Loop panels for hook placard and patches
Zipper closure
Lifetime warranty
Imported
LEVEL IV MODEL 1155 PLATE FEATURES
NIJ level IV threat protection
NIJ 0101.06 certified and listed on NIJ CPL list
Multi-Hit Rated
Single Curve
10" x 12" SAPI cut
Weight - 8.2lbs
Stand alone protection
600 denier Cordura nylon exterior cover
Constructed of ceramic face with composite backing
Made in the USA
10 Year warranty
Stopping Power
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
M855/SS109
7.62x54R API
7.62x63 M2AP
LEGAL
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Shellback Tactical Triple Pistol Mag Pouch
from $19.99
$23.99
Shellback Tactical Triple Pistol Mag Pouch
The Shellback Tactical Triple Pistol Mag Pouch holds three pistol magazines and is secured by button snap molle webbing. This extremely durable pouch is adjustable and can comfortably hold magazines from 4 inches in height to 5.5 inches in height Perfect addition to your kit and fits well with Shellback Tactical plate carriers! Don't run out of ammo, and order your Shellback Tactical Triple Pistol Mag Pouch today!
SPECIFICATIONS
Made of heavy duty, reliable of 500 denier nylon
Holds three pistol magazines and is compatible with most service pistols
Adjustable flaps with hook closure for locked-down and secure transportation
Comfortably fits magazines from 4 inches to 5.5 inches in height
2 button snap webbing straps to attached to any PALS webbing
Fully MOLLE compatible
Lifetime warranty
Imported
Dimensions - 6"T x 5.5" W x 1.5" D
Weight - 3.2 oz
16
Shellback Tactical Stealth Low Vis Plate Carrier
from $141.35
$193.50
Shellback Tactical STEALTH Low Vis Concealable Plate Carrier
The Shellback Tactical STEALTH Low Vis Plate Carrier is designed to be a super low profile, light weight plate carrier/armor carrier. Ideal to be worn under a jacket, surveillance operations, or just as a slick plate carrier. Built for low visibility and concealment. The carrier is designed to hold 10x12 Level III or Level IV hard armor plates. It can also accept 10x12 soft armor style plate backers if plates are not needed. The cummerbund is extremely adjustable due to its overlapping design front and back that can fit small statured and larger statured body types.
Hypalon non slip material makes up the fully adjustable shoulder straps which also have 2 slips for other uses. The front has a handy zippered admin pocket, a large 4 inch loop area for placards and integrated nylon vertical strips to accommodate QASM buckles. To add a chest rig if needed. QASM Buckles not included. Also included is a double magazine pouch for .223/5.56 magazines. Cummerbund has 2 integrated pouches for magazines or radio.
Interior is lined with breathable spacer mesh for comfort. The back of the carrier has an integrated Hypalon drag handle and a 4 inch loop are for patch identifiers. Magazines in pictures not included
Specifications:
Constructed of 500 denier Cordura
Low Vis Carrier
Adjustable Hypalon shoulders with 2 slits
Two areas of loop for identifiers
Integrated zippered admin pouch
Integrated nylon vertical strips to accommodate QASM buckles. To add a chest rig if needed. QASM Buckles not included
Heavy Duty bar tacking at key stress points
Low Profile/ Lightweight
Can be concealed under jacket
Removable double rifle mag pouch included
Fully adjustable Cummerbund Overlaps itself on the front and back area making it extremely adjustable in or out depending on your size.
Cummerbund has 2 pocket areas on each side for magazines or radios
Hypalon Drag Handle lays flat- Secures with Hook and Loop
Interior has 3D style spacer mesh
Plate pockets load from the bottom and will accept up to 10x12 Level 3 and 4 ESAPI OR SIMILAR PLATES and Plate Backers
GSA and TAA Compliant
Lifetime warranty
Shellback Tactical Single Stacker Open Top M4 Mag Pouch
from $10.66
$16.29
Shellback Tactical Single Stacker Open Top M4 Mag Pouch
The Shellback Tactical Single Stacker Open Top M4 Mag Pouch is an essential piece of gear for operators who need a quick, easy and secure way to carry extra magazines. The pouch is engineered to hold two 30 round M4 magazines in a single row double stacked formation. Fully Molle compatible, the small design allows you to place it on any tactical gear with PALS webbing. Open top design with bungee retention cords allows quick access to your magazines. Backed by our lifetime guarantee, you break it, we repair it or replace it free of charge. Order your Shellback Tactical Single Stacker Open Top M4 Mag Pouch today!
Specifications
Constructed of 500 denier nylon
Holds 2 M4/AR15 30 round magazines - single row double stacked
Compatible with all MOLLE systems
2 x 2 rows of PALS webbing on front of pouch
2 button snap webbing straps on back of pouch
2 adjustable bungee retention cords with pull tabs
2 bottom grommets for quick drainage
Low cut design for quick and easy reloads
Bar tacking and reverse stitching for enhanced durability
Lifetime warranty
Imported
Dimensions - 6" T x 3" W x 2.5" D
Weight - 4 OZ
Shellback Tactical Single Pistol Mag Pouch
from $13.99
$16.99
Shellback Tactical Single Pistol Mag Pouch
The Shellback Tactical Single Pistol Mag Pouch has a low profile, highly modular design that holds one pistol magazine. The elastic sides and adjustable flap allow it to fit nearly any pistol mag or even small tools and flashlight. This pouch is Molle compatible and comes with a single rear strap with snap closure for attachment to PALS webbing. Be ready for the fight, buy your Shellback Tactical Single Pistol Mag Pouch today!
Specifications
Made from 500 denier nylon
Holds 1 pistol mag that is compatible with most service pistols
Adjustable to comfortably fit magazines from 4 inches to 6 inches in height
1 button snap webbing strap on the back of pouch
1 bottom grommet for quick drainage
Fully MOLLE compatible
Low profile streamlined design for mobility
Bar tacking and reverse stitching for enhanced durability
Lifetime warranty
Imported
Dimensions - 6"T x 2.25"W x 1.5"D
Weight - 2.5 OZ
Shellback Tactical Banshee Elite Cummerbund
from $84.99
$104.99
Shellback Tactical Banshee Elite 2.0 Cummerbund
The Shellback Tactical Banshee Elite 2.0 Cummerbund features six integrated pockets with bungee retention which are perfect for AR mags or small duty radios. This cummerbund comes standard with our Shellback Tactical Banshee Elite 2.0 Plate Carrier and is the cummerbund of choice for operators who need the ability to store extra AR mags. This cummerbund also features interior pockets for soft body armor inserts and is backed by our lifetime warranty. Upgrade you existing plate carrier and order the Shellback Tactical Banshee Elite 2.0 Cummerbund today!
Specifications
Constructed of 500 denier Cordura nylon
Fully adjustable with rear bungee lacing system to accommodate most sizes
Six integrated pockets (three on each side) with bungee pull tab retention. Pockets fit AR mags or small duty radios
Three rows of PALS webbing on each exterior side to customize your kit with MOLLE pouches
Three rows of PALS webbing on each interior side to add MOLLE side plate pockets
Built in interior pockets on each side that are accessible from the rear to slide in soft armor inserts
Interior pockets fit soft armor panels that are sized at 13.75 inches long by 5.5 inches tall
Cummerbund fits all Shellback Tactical plate carriers and most other plate carriers on the market with rear pass through pocket
Heavy duty bar tacking at key stress points
GSA and TAA compliant
Lifetime Warranty
Shellback Tactical Double Stacker Open Top M4 Mag Pouch
from $21.99
$26.99
Shellback Tactical Double Stacker Open Top M4 Mag Pouch
The Shellback Tactical Double Stacker Open Top M4 Mag Pouch is the perfect modular solution to access four of your M4 magazines quickly and easily. This extremely durable pouch is constructed of lightweight 500 denier nylon. The pouch is engineered to hold four 30 round M4 magazines in a double row double stacked formation. Fully Molle compatible, this pouch features four button snap webbing straps to secure it to any plate carrier, tactical backpack or battle belt with PALS webbing. Backed by our lifetime guarantee, you break it, we repair it or replace it free of charge. Order your Shellback Tactical Double Stacker Open Top M4 Mag Pouch today!
Specifications
Constructed of 500 denier nylon
Holds 4 M4/AR15 30 round magazines - double row double stacked
Compatible with all MOLLE systems
4 x 2 rows of PALS webbing on front of pouch
4 button snap webbing straps on back of pouch
4 adjustable bungee retention cords with pull tabs
4 bottom grommets for quick drainage
Low cut design for quick and easy reloads
Bar tacking and reverse stitching for enhanced durability
Lifetime warranty
Imported
Dimensions - 6" T x 6.5" W x 2.5" D
Weight - 6 OZ
Shellback Tactical Adjustable MBITR Radio Pouch
from $20.99
$23.99
Shellback Tactical Adjustable MBITR Radio Pouch
The Shellback Tactical Adjustable MBITR Pouch is designed to fit the two most common military radios: Thales PRC-148 and Harris PRC-152 Falcon III MBITR radios. This MBITR radio pouch is designed to be worn with MBITR radio controls facing the operator and can easily attach to your kit with two self locking webbing straps. With the release of one buckle, the pouch quickly folds out and allows quick access to radio control buttons. Pouch includes an easy access flap at the bottom which allows operators to quickly change radio batteries without removing the entire radio. Stay connected and order your Shellback Tactical MBITR pouch today!
Specifications
Constructed from 500 denier nylon
Fits Thales PRC-148 MBITR Radio
Fits Harris PRC-152 Falcon III MBITR Radio
Compatible with all MOLLE systems
2 snapless self locking webbing straps on back of pouch
The access flap at the bottom of the pouch allow users to quickly change batteries without removing the radio from the pouch
Design to be worn with radio controls facing the user
Fold out design allows users to have quick access to control buttons, program indicators and digital screen.
Elastic retention band for positive control
Lifetime warranty
Imported
Dimensions - 8"T x3"W x 2.5"D
Weight - 5 oz
Shellback Tactical 6 x 8 Utility Pouch
from $13.32
$19.99
Shellback Tactical 6 x 8 Large Utility Pouch
The Shellback Tactical 6 x 8 Utility Pouch is a multipurpose all-weather pouch that can easily store a variety of tactical gear. Common items stored in this pouch are compasses, paracord, small maps, map pens, small notebooks and medical supplies. This pouch is perfect for plate carriers and tactical backpacks. Be ready for the fight and order your Shellback Tactical 6 x 8 Utility Pouch today!
Specifications
Constructed of durable 500 denier nylon
Compatible with all MOLLE systems
Zippered compartment is 8 x 6 x 2 inches and features dual zipper closure
Paracord pull tabs for easy zippered closure
2 snapless self locking webbing straps on back of pouch to attach to PALS webbing
1 metal grommet on bottom of pouch for drainage
6 x 3 rows of PALS webbing on front of pouch
Lifetime warranty
Dimension - 6"T x 8"W x 2.5"D
Weight - 4 oz
Imported
Elite Survival Systems Butt Stock Mag Pouches
$29.95
$40.69
Buttstock mag pouch attaches to fixed or collapsible stock rifles. Buttstock magazine holder is constructed of 1000 denier nylon Heavy-duty elastic straps with velcro closure Elastic cord retention provides immediate access to rifle stock pouch magazine Tactical buttstock shell holder available in Black and Coyote
Elite Survival Systems Velcro Attach Speed Strip, Shotgun Shells
$14.95
$25.41
Velcro shotshell carrier reload strips come in two styles to hold rifle cartridges or shotshells. Tactical shotshell holders available in black, olive drab, coyote tan, or MultiCam.
Elite Survival Systems Butt Stock Bullet Holders
$27.95
$38.65
Attach this buttstock ammo carrier to either side of your rifle or shotgun for maximum versatility. This butt stock bullet holder includes a Velcro reload strip which secures with hook and loop for tactical reloading.
Constructed of heavy-duty nylon webbing and elastic
Removable ammo strip holds 10 rifle cartridges or 6 shotshells
Additional ammo reload strips can be purchased separately here.
Available in Black and Coyote
Rifle cartridge carrier made in the USA
Elite Survival Systems Butt Stock Cartridge Holders
$14.95
$25.41
Attach this buttstock ammo carrier to either side of your rifle or shotgun for maximum versatility. This butt stock bullet holder includes a Velcro reload strip which secures with hook and loop for tactical reloading.
Constructed of heavy-duty nylon webbing and elastic
Removable ammo strip holds 10 rifle cartridges or 6 shotshells
Additional ammo reload strips can be purchased separately here.
Available in Black and Coyote
Rifle cartridge carrier made in the USA
Elite Survival Systems Flashlight Pouches w/Velcro
$15.95
$26.43
The #HL130 is a 1000 dernier nylon flashlight pouch with a Velcro closure. The velcro hook backing of this MOLLE flashlight holder is designed to attach to velcro loop panels on our bags and cases.This tactical flashlight holster for duty belts is designed to hold Surefire 6P and similar small lights.
Velcro flashlight holder made in the USA.
Elite Survival Systems Magazine Pouches/Knife Pouches
$14.90
$23.11
Product Info for Elite Survival Systems Magazine Pouches/Knife Pouches w/Velcro AttachElite Survival Systems makes hard-charging holsters , belts , holster accessories , pouches and other law enforcement equipment that is designed for soldiers and police officers on duty. ESS built its reputation for durable, high-performance tactical gear by providing innovative, top quality leather holsters and other duty gear. From concealed gun holster styles like shoulder holsters and ankle holsters, to military and police equipment like handcuff cases and magazine pouches, the Elite Survival Systems design team has created the finest duty holsters and tactical equipment in the industry. The skilled craftspeople at ESS have been making law enforcement gear and military gear for the Police, Government, and Military fields. Pistol holsters, tactical belts and pouches from Elite Survival Systems have been placed in military and law enforcement service on every continent. Count on ESS to deliver the durable police gear and tactical holsters you need to get the job done right.
The Magazine Pouch/Knife Pouch #HL110 is constructed of 1000 denier nylon with velcro closure. Velcro hook backing is designed to attach to velcro loop panels in Elite bags and cases. Elite Survival Systems Magazine Pouch/Knife Pouch designed to hold one pistol magazine or folding pocket knife.
Specifications for Elite Survival Systems Magazine Pouches/Knife Pouches w/Velcro Attach:Color: BlackFabric/Material: 1000 Denier NylonHand: AmbidextrousConcealable: YesAttachment/Mount Type: RingAccessory Attachment System: RingFastener/Closure Type: VelcroPackage Contents:Elite Survival Systems Magazine Pouches/Knife Pouches w/Velcro Attach
Elite Survival Systems Velcro Attach Magazine Pouches
$36.95
$47.82
The velcro attaching magazine pouches are constructed of heavy-duty durable fabric with velcro closure. See the chart below for triple mag pouch options and configurations. The 223/308 mag pouch has a hook backing and is designed to attach to velcro loop panels in our bags and cases. Each velcro backed magazine pouch also includes "D" rings for attaching a shoulder strap.3-magazine holder made in the USA
Size
Holds
HL103
Three .223 pouches(two in each pouch, holds 6 total) orThree .308 pouches (one in each pouch, holds 3 total) $36.95
HL104
HL105
Three AK47/7.62x39 magazines $36.95
HL106
Two 50rd 5.7 magazines $36.95
HL107
HL109
Three pistol caliber extended/stick magazines$36.95
Elite Survival Systems Flashlight Pouches
$16.99
$27.49
Product Info for Elite Survival Systems Flashlight PouchesElite Survival Systems makes hard-charging holsters , belts , holster accessories , pouches and other law enforcement equipment that is designed for soldiers and police officers on duty. ESS built its reputation for durable, high-performance tactical gear by providing innovative, top quality leather holsters and other duty gear. From concealed gun holster styles like shoulder holsters and ankle holsters, to military and police equipment like handcuff cases and magazine pouches, the Elite Survival Systems design team has created the finest duty holsters and tactical equipment in the industry. The skilled craftspeople at ESS have been making law enforcement gear and military gear for the Police, Government, and Military fields. Pistol holsters, tactical belts and pouches from Elite Survival Systems have been placed in military and law enforcement service on every continent. Count on ESS to deliver the durable police gear and tactical holsters you need to get the job done right.
This pouch is constructed of heavy-duty nylon webbing with velcro closure. MSK-L Fits AA mini flashlights, FH6P Fits Surefire 6P flashlights.
Specifications for Elite Survival Systems Flashlight Pouches:Color: BlackFastener/Closure Type: VelcroFabric/Material: Heavy-Duty Nylon WebbingBelt Width: 2.25 inFeatures of Elite Survival Systems Flashlight Pouch:Constructed of heavy-duty nylon webbingVelcro closureFits belts up to 2.25" wideCompatible with M/ASH shoulder holster systemmade in specialized factoriesPackage Contents:Elite Survival Systems Flashlight Pouches
Elite Survival Systems Single/Double Speedloader Pouches
from $9.30
$19.30
Product Info for Elite Survival Systems Single/Double Speedloader PouchesKeep a speedloader or two on your belt with this built-to-last concealed carry speedloader pouch by Elite Survival Systems. Constructed of 1000 denier nylon. Velcro enclosure. Speedloader carrier fits belts up to 2.25" wide. Speedloader pouch is available in single or double compartment versions.
Specifications for Elite Survival Systems Single/Double Speedloader Pouches:Belt Width: 2.25 inAttachment/Mount Type: Belt Loop/SlotAccessory Attachment System: Belt SlotColor: BlackFastener/Closure Type: VelcroFabric/Material: 1000D NylonPackage Contents:Elite Survival Systems Single/Double Speedloader Pouches
Elite Survival Systems Handcuff Pouches
$19.95
$30.50
Elite handcuff pouch holds one pair of standard or link cuffs on the belt. * Constructed of 1000 denier nylon * Velcro closure * Fits belts up to 2.25" wideNylon cuff case made in the USA
Elite Survival Systems Belt Mag Holders
from $28.95
$39.67
The MOLLE Mag Pouch M4 holds two .223 or one .308 mag in one pouch. This rifle magazine holder is available in black, coyote tan, and multicam. Made in the USA. The rifle mag pouch attaches to any MOLLE compatible vest, pack, etc. Rifle magazine pouch is constructed of CORDURA® 500D nylon for maximum durability. The flap of this MOLLE single mag holder has a Velcro closure and glove-friendly tabs.
Elite Survival Systems Belt Keepers
$14.90
$23.37
Specifications for Elite Survival Systems Belt Keepers:
Fastener/Closure Type: Snap Color: Black Fabric/Material: Nylon Quantity: 4 Package Contents: Elite Survival Systems Belt Keepers Similar Products to Elite Survival Systems Belt Keepers
Elite Survival Systems Belt Keepers
Nylon belt keepers come in sets of 4, and are available to fit 2 inch or 2.25" belts. Duty belt keepers attach with dual snap closures.
Made in the USA.
Elite Survival Systems DuraTek Molded Glove Pouches
$18.95
$29.49
Tactical glove pouch constructed of padded Ballistic nylon for durability
Molded & form-fitted MOLLE latex glove pouch design
Snap closure
Nylon glove pouch holds two pairs of latex gloves in two compartments
Duty belt glove pouch fits belts up to 2.25" wide
Elite Survival Systems Dura-Tek Silent Key Pouches
$12.95
$23.37
Key silencer constructed of molded Ballistic nylon
Key case holds keys securely and silently
Includes key ring
Hook & loop closure
Silent key holder fits duty belts up to 2.25" wide
Elite Survival Systems Dura-Tek Baton Pouches
from $18.95
$29.49
Baton pouch is constructed of padded ballistic nylon for durability
Molded & form-fitted design
Available to fit 16"-26" batons
Nightstick holder fits belts up to 2.25" wide
Elite Survival Systems DuraTek Molded Open Top Cuff Pouches
$21.95
$32.54
Open top handcuff pouch design for quick access to cuffs
Constructed of padded Ballistic nylon for durability
Molded & form-fitted design
Snap closure
Handcuff case for duty belt holds one pair standard or linked cuffs
Nylon handcuff case fits belts up to 2.25" wide
Elite Survival Systems Dura-Tek Handcuff Pouches
from $21.95
$32.54
Open top handcuff pouch design for quick access to cuffs
Constructed of padded Ballistic nylon for durability
Molded & form-fitted design
Snap closure
Handcuff case for duty belt holds one pair standard or linked cuffs
Nylon handcuff case fits belts up to 2.25" wide
Elite Survival Systems Dura-Tek Mace Pouches MV170-B Fastener/Closure
$21.95
$32.54
Mace case constructed of padded Ballistic nylon for durability
Molded & form-fitted design
Snap closure
Pepper spray pouch holds 1 can MK-III or MK-IV style mace
Fits belts up to 2.25" wide
#MV170 (MK-IV large mace)
Elite Survival Systems DuraTek Dual Flashlight Rings MV421-B Belt Loop/Snap
$11.95
$22.36
Constructed of 1" nylon webbing
Dual flashlight belt rings fit most medium or large lights
Nylon belt holder fits law enforcement and military belts up to 2.25" wide
Flashlight Ring #MV421
Elite Survival Systems Dura-Tek Glove or M3/M6 Light Pouches
$19.95
$30.50
Small tactical belt pouch constructed of padded Ballistic nylon for durability Molded & form-fitted design Snap closure Holds latex gloves or M3/M6 and similar rail mounted lights M3/M6 light or glove pouch for duty belts up to 2.25" wide