18
Spartan AR550 Body Armor And Sentinel Plate Carrier Package
$374.54
$401.54
SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER
Product Overview
The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.
Ready For Anything
Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike.
Spartan Armor Systems® Sentinel Plate Carrier Specs:
Adjustable from 38" To 48" Chest Size
Durable Emergency Drag Handle
Anti-slip Shoulder Padding With Velcro
Side Release Buckles On The Internal Waist Strap
Padded Mesh Separators For The Interior Of The Carrier For Breathability
Fits 10" X 12" Shooters Cut Plates
Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor
Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side
Velcro On The Back Of The Carrier Measures 9” X 3”
Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time
1000 Denier
Bottom Loading
Weighs Approximately 2lbs. 9oz.
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.
SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO
Product Overview
Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.
Protective Value Added
We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.
Battle Hardened
Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Blazing The Trail of Innovation
Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates.
Shooters Cut Plate Weight (per plate):.
10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz.
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Side Plate Weight (per plate):
6×6 approximately 2lbs 9oz (base coat)
AR550 Body Armor - Shooters Cut Specs:
Made in U.S.A.
Special Threat Tested to Level III+ Standards
Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See a Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor And Spartan Swimmers Cut Plate Carrier Entry Level Package
from $307.06
$293.13
SPARTAN ARMOR SYSTEMS® "SPARTAN" SWIMMERS CUT PLATE CARRIER
Product Overview
The Spartan Armor Systems® "Spartan" Swimmers Cut Plate Carrier is designed for use with our Swimmers Cut steel core armor: Spartan™ Omega™ AR500 and AR550. This minimalist “Spartan” carrier is designed for those seeking speed, agility, and ultimate maneuverability in their carrier. The Swimmers Cut Plate Carrier is adjustable from a Medium size to XL and can accommodate 6”x6” side plates in the cummerbund, should you desire to run it with enhanced side protection. Intended for highly active environments that require the wearer to remain nimble, this carrier is constructed of extremely durable 860 Denier poly construction, fits 10”x12” swimmers cut plates which provide coverage where you need it most, but reduces weight and allows for enhanced mobility by eliminating a small amount of plating from the shoulder regions. Don’t let the paired down design fool you though, this versatile and effective carrier affords a good degree of customization with PALS webbing on the front and back sides for the attachment of molle accessories and pouches, and velcro on front and back for patch placement and identifiers. If you’re looking for a versatile plate carrier that allows for a greater range of motion and mobility that won’t break the bank, the Spartan Swimmers Cut Plate Carrier is for you.
Spartan Armor Systems® “Spartan” Swimmers Cut Plate Carrier Specs:
Lightweight Plate Carrier That Accepts Side Plates
Designed For Spartan Armor Systems® 10" X 12" Swimmers Cut Steel Core Plates
Adjustable From Medium To XL
PALS Webbing On Front And Back For Versatility
Velcro On Front And Back For Patch Placement
Cummerbund Is Designed To Hold 6" X 6" Side Plates Comfortably
Shoulder Pads Included
860 Denier Poly Construction
Reinforced Drag Handle
NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems®. We can not guarantee a fit with plates made by other manufacturers.
SPARTAN™ OMEGA™ AR500 BODY ARMOR SWIMMERS CUT SET OF TWO
Product Overview
Sleek, lightweight, and ready to move, the Swimmers Cut Spartan™ Omega™ AR500 Body Armor affords operators with increased mobility, a decrease in overall weight. The “Swimmers Cut” gets its name from the improved range of motion in the shoulders due to the angle of cut in the top corners of the plate. This allows for a lighter and less obstructive body armor plate while still providing coverage for vital organs. Swimmers Cut Spartan™ Omega™ AR500 Body Armor is constructed from lab certified AR500 ballistic grade steel, (¼” thickness) and these body armor plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. When the environment dictates speed and mobility as primary and critical factors, the Spartan omega AR500 Body Armor Swimmers Cut Plates are an excellent choice.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.
Exceptional Comfort & Engineering
You have the choice of getting our AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved AR550 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.
Chest Plate Weight (per plate):
10x12 Plate: Base Coat 7lbs 7oz. Full Coat 8lbs 1oz.
Side Plate Weight (per plate):
6×6 approximately 2lbs 1oz (base coat) or 2lbs 15oz (full coat)
6×8 approximately 3lbs 10oz (base coat) or 3lbs 14oz (full coat)
Spartan™ Omega™ AR500 Body Armor Specs:
Made in U.S.A.
Meets NIJ 0101.06 Level III Specifications
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See A Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
20
Spartan AR550 Body Armor And Sentinel Swimmers Plate Carrier Package
from $358.43
$384.27
Spartan Armor Systems AR550 Body Armor And Sentinel Swimmers Plate Carrier Package
Spartan Armor Systems AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.
Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?
Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating.
Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+.
Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.
SPARTAN ARMOR SYSTEMS SENTINEL PLATE CARRIER
Durable emergency drag handle
Anti-Slip shoulder padding w/ velcro
Side release buckles on internal waist strap
Padded elevated mesh on the interior of carrier for breathability
Fits 10x12 Swimmers cut plates
Removable cummerbund with side plate pockets for 6x6 and 6x8 side plate armor
Velcro in front of the Carrier is 8x4 w/ a velcro loop on each side
Velcro on the back of the Carrier measures 9x3
Stronger carrier material that can withstand through wear and tear over a long period of time
1000 denier
Bottom loading
Weighs approximately 2lbs. 9oz.
NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems. We can not guarantee a fit with plates made by other manufacturers.
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates!
28
Spartan AR550 Body Armor And Achilles Plate Carrier Package
from $375.38
$402.45
Spartan Armor Systems AR550 Level III+ Armor with Achilles Laser Cut Plate Carrier
Package includes:
Front and Back AR550 shooters cut steel armor plates.
Two 6x6 side plates.
Achilles Laser Cut Plate Carrier in your choice of Black, Coyote Brown, or OD Green.
You have the option to upgrade to the ATC™ Advanced Triple Curve and Full Coat for fragmentation mitigation.
Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.
Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?
Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.
Achilles Plate Carrier Specs:
1000 Denier Materials
Light weight and Duty 1000 Denier laser Cut Molle
Zippered Admin Pouch
Kangaroo pouch with removable triple M4 Pouches
Padded Shoulder Pads
Padded Front and rear with ventilation vents
Low Profile Drag Handle
Molle Velcro front and rear for Identifier Patches
2-inch replaceable quick release buckles
Accepts 10X12 and 11x14 Body Armor
6x6 or 6x8 Side Plates
Fits S to XL
Buy Body Armor - Level III+ Spartan AR550 Armor
We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor! With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!
Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming.
Advanced Triple Curve (ATC) AR550 Spartan Body Armor. An industry FIRST! Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Level III+ Side Plates: Choose from either 6″ x 6″ (small) or 6″ x 8″ (large)
Chest Plate Weight (per plate): 10x12 AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz.
Side Plate Weight (per plate): 6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6oz (base coat), 3lbs 12oz (full coat).
Thickness: .25″ AR550 plus approximately .25″ coating (full coat) makes this slim profile plate overall .5-.6″ in total thickness
As with all of our Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
See A Comparison of Our Full Line of Body Armor:
8
Spartan Armor Systems AR500 Omega Leonidas Plate Carrier Package
from $440.76
$472.54
Advanced plate carrier that is feature packed
500 Denier
Front Top Zippered Admin Pouch
Front Lower Velcro kangaroo pouch
PALS web attachment points covering the front, back and shoulders of the vest
Mil spec laser cut PALS Webbing on the shoulders
Cummerbund is designed to hold a 5"x15" IIIA soft armor inside each side.
Cummerbund has a proprietary retained shock cord system to allow stretch while being held in place to stop sagging.
Cummerbund is removable and the carrier is equipped with removable quick release buckles
Genuine US Mil Spec Webbing
Velcro on the back Drag Handle keeps it in place
Heavy Duty bar tacking at key stress points
Communication or hydration hose guides
Padded Front and back interior of carrier with airflow channels sewn in
Front and back areas of Velcro for identifiers
Bottom Loading Plate Pockets accepts 10x12, SAPI and Similar Armor
All pieces Made in USA, assembled in Mexico
*Note* This plate carrier by itself will only hold 5x15 Soft Armor Panels, this package will come with a molle system to attach on your 6x6 or 6x8 side plates.
Leonidas Plate Carrier System with Spartan Armor Systems™ Omega™ AR500 Body Armor
The Leonidas plate carrier is an advanced plate carrier system is fit for a Spartan King, hence the name "Leonidas". This versatile plate carrier hosts a wide variety of proven features including a removable cummerbund. When you are looking for the toughest plate carrier available to take into battle this is it. Take a look at all the features below.
Advanced plate carrier that is feature packed
500 Denier
Front Top Zippered Admin Pouch
Front Lower Velcro kangaroo pouch
PALS web attachment points covering the front, back and shoulders of the vest
Mil spec laser cut PALS Webbing on the shoulders
Cummerbund is designed to hold a 5"x15" IIIA soft armor inside each side.
Cummerbund has a proprietary retained shock cord system to allow stretch while being held in place to stop sagging.
Cummerbund is removable and the carrier is equipped with removable quick release buckles
Genuine US Mil Spec Webbing
Velcro on the back Drag Handle keeps it in place
Heavy Duty bar tacking at key stress points
Communication or hydration hose guides
Padded Front and back interior of carrier with airflow channels sewn in
Front and back areas of Velcro for identifiers
Bottom Loading Plate Pockets accepts 10x12, SAPI and Similar Armor
All pieces Made in USA, assembled in Mexico
*Note* This plate carrier by itself will only hold 5x15 Soft Armor Panels, this package will come with a molle system to attach on your 6x6 or 6x8 side plates.
Spartan™ Omega™ AR500 Body Armor - High Quality Ballistic Threat Protection
With all of our Spartan™ Omega™ AR500 Body Armor products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about Spartan™ Omega™ AR500 Body Armor and the steel we use to construct our body armor!
You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die. Or with our Advanced Triple Curve ™. Instead of bending our formed plates in 2 different locations as we used to, we have machined custom tooling to give these plates a nice curvature to best conform to the side of your torso. Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems’ ATC™ body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC™ armor better “hugs” the operator’s body, resulting in a significant increase in comfort. Our CNC equipment capabilities have allowed us to create dies which form our body armor without any “crease” bends. Crease bends, “work hardens” the plate and causes a significant amount of stress to the portion of the plate under load. We HIGHLY suggest when doing research to ask if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems™ has gone the extra mile to create this die process.
These plates come as a pair.
Full Coat or Base Coat Options:
We are excited to announce our potentially “life saving” breakthrough! The strike face for our plates is mark embedded with our Spartan logo! Both sides of these plates are coated, however, the back side only has a “courtesy coat” to protect against wear and rust. The front of the plate is lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™. The result is a plate approximately 1/2-5/8” total thickness. See our FAQ for more information about our Encapsaloc ™ process. By purchasing, you will receive (2) Formed Spartan™ Omega™ AR500 Body Armor 10″x12” chest plates. Due to popular demand, we have added a “base coat” only option for our AR500 Omega™ armor products. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.
23
Spartan Armor Systems AR550 Active Shooter Kit / Police Tactical Gear
from $340.39
$324.95
Spartan Armor Systems Active Shooter Kit With Level III+ AR550
Spartan Armor Systems AR550 Body Armor with Hydra Plate Carrier. This active shooter kit set up is designed to allow a quick response time and comfortable performance fit with superior Level III+ Rifle Rated Protection. Carrier includes emergency drag handle, quick cinch adjustments for the front and hook and loop adjustments on the shoulders. The Spartan Armor Active Shooter Kit is perfect for rapid response situations.
Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.
Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?
Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.
The Hydra Plate Carrier is a highly adaptable carrier ideal for quick deployment and emergency situations such as active shooter scenarios. Easily adjustable buckles ensure a snug and comfortable fit on the sides. Ample length shoulder straps allow the Hydra plate carrier to be easily adjusted to fit a wide variety of body types. Breathable mesh is used at chest, back and shoulder contact points to allow for maximum breathability. The Hydra plate carrier is a great choice for anyone looking for a lightweight and versatile body armor configuration.
Front map pocket
Emergency drag handle
Removable padded mesh shoulder pads with hook and loop guides
Adjustable shoulder straps
Hook and loop webbing
Heavyweight webbing for modular attachments
Padded mesh interior lining
Quick adjust cinches
Quick release buckles
Easy access plate pockets
Waist Size: 30″ – 46″ adjustable sizing
Accepts traditional Medium or Large SAPI plates up to 10.25″ x 13.25″. Best fit for our shooters cut and swimmers cut AR500 and AR550 body armor.
This package includes our Level III+AR550 10x12 Armor. 1/4" thickness and provides the operator with Level III+ protection IAW NIJ0101.06 standards.
Our Level III+ AR550 Armor has been tested to go beyond the Level III testing protocol (6 shots .308/M80 Ball, 2780 fps).
Special Threat Ratings:
SS109/M855 3505 fps 6 shots
30-06 up to 2,719 fps
With all of our AR550 Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR550! All purchases of our Spartan Armor products have current lab certificates and secondary ballistics available on request. Remember, not all body armor is created equal!
Coating Options:
Choose the Full Coat option to have the plate lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™. The result is a plate approximately 1/2-5/8” total thickness. See our FAQ for more information about our Encapsaloc ™ process. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.
To learn more check out our blog on the coating options:
https://www.spartanarmorsystems.com/blog/encapsaloc-fragmentation-mitigation-antispall-body-armor-coating/
Chest Plate Weight (per plate): 10x12 AR500 Omega Armor Shooters Cut: Base Coat 8lbs 7oz. Full Coat 9lbs 3oz.
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
Shellback Tactical Prevail Series Level IV Single Curve 10 x 12 Hard Armor Plate - Model 4S17
$189.99
$264.80
Shellback Tactical Prevail Series 10 x 12 NIJ 0101.06 Certified Level IV Hard Armor Plate Model 4S17
The Shellback Tactical 4S17 Level IV Hard Armor plate is both NIJ Certified and DEA Compliant which provides level IV protection against 7.62 x 63 mm M2AP rifle rounds. This plate is prefect to add to your tactical kit and provides protection against armor piercing rifle rounds. Be ready for the fight and order your Shellback Tactical 4S17 Level IV Hard Armor plate today!
CATEGORY
ARMOR SPEC
NIJ Threat Level
Level IV
Certification
NIJ 0101.06 Certified
Special Threat
-------------
Protection Type
Stand Alone
Construction
Alumina ceramic & composite
Exterior Cover
1000 Denier Cordura nylon
Size
Nominal 9.5" x 11.5"
Thickness
.95"
Weight
7.2 lbs
Cut
Shooter cut
Curvature
Single curve
Spall Protection
Yes
Multi-Hit Protection
Yes
Protective Area
Edge to Edge
Warranty
10 Years
Country of Origin
USA
SPECIFICATIONS
NIJ threat level IV
NIJ 0101.06 Certified
DEA Compliant
Listed on NIJ compliant products list
Weight 7.2lbs
Stand alone protection
Single Curve
Single Plate
10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"
Thickness - .95"
Multi-hit rated
M2AP - 3 Rounds
M80 Ball, Steel - 3 Rounds
M43 MSC PS - 3 Rounds
M855 Ball - 3 Rounds
223 REM - 3 Rounds
1000 denier Cordura nylon exterior cover
Constructed of ceramic face with composite backing
10 year ballistic warranty
USA Made - Berry compliant
ROUNDS DEFEATED
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
M855/SS109
7.62x54R API
7.62x63 M2AP
Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Single Plate With Base Coat Corrosion Protection
from $71.95
$76.90
SPARTAN™ OMEGA™ AR500 BODY ARMOR SINGLE PLATE With Base Coat Corrosion Protection
Product Overview
Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.
Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection
Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Exceptional Comfort & Engineering
You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.
Chest Plate Weight (per plate):
8”x10” Plate: Base Coat 5lbs 13oz. Full Coat 6lbs 7oz
10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz.
11"x14" Plate: Base Coat 10lbs 1oz. Full Coat 11lbs 6oz.
Additional Spartan™ Omega™ AR500 Body Armor - Specs:
Made in U.S.A.
Meets NIJ 0101.06 Level III Specifications
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
Includes 1 Armor Plate Per Order
Available in Shooters Cut or Swimmers Cut
See A Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Single Plate With Full Coat Frag Mitigation Coating
from $71.95
$76.90
SPARTAN™ OMEGA™ AR500 BODY ARMOR SINGLE PLATE With Full Coat Frag Mitigation Coating
Product Overview
Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.
Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection
Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Exceptional Comfort & Engineering
You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.
Chest Plate Weight (per plate):
8”x10” Plate: Base Coat 5lbs 13oz. Full Coat 6lbs 7oz
10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz.
11"x14" Plate: Base Coat 10lbs 1oz. Full Coat 11lbs 6oz.
Additional Spartan™ Omega™ AR500 Body Armor - Specs:
Made in U.S.A.
Meets NIJ 0101.06 Level III Specifications
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
Includes 1 Armor Plate Per Order
Available in Shooters Cut or Swimmers Cut
See A Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
23
Spartan Armor Systems Spall Containment Sleeve
$56.00
$53.46
Spartan Armor Systems® Spall Containment Sleeve
Product Overview
Spartan Armor Systems® strives to afford their customers and operators in the field with the highest quality body armor and every advantage possible. Spartan Armor Systems® Spall Containment Sleeves provide an extra layer of protection from fragmentation (spalling) and a high degree of confidence when wearing our Base Coat or Full Coat Spartan™ Omega™ AR500 and AR550 Steel Core body armor plates. These spall containment sleeves will reduce or potentially eliminate spalling as projectiles ricochet off the AR Plate, effectively containing such fragments within layers of Aramid Fibers and the rugged 1000D Cordura Ballistic Nylon Casing.
Added Shielding
Spalling is a reality of steel core plates that do not have a means of mitigation such as our Encapsaloc™ fragmentation mitigation coating. It’s the nature of high-velocity ballistic impacts and it is unavoidable. However, it is possible to add spall mitigation to base coat plates after the fact, or even increase the level of mitigation for full coat plates. The Spartan Armor Systems® Spall Containment Sleeve effectively helps shield the operator against spalling and fragmentation in an engagement by capturing the small projectiles within the highly flexible and durable ballistic nylon casing composed of 1000D Cordura fabric. Boiled down, the Spartan Armor Systems® Spall Containment Sleeve is another level of shielding and protection you can opt to carry into battle without adding any noticeable weight to your loadout.
Spartan Armor Systems® Spall Containment Sleeve Specs:
Ballistic Nylon Casing 1000D Cordura
Multiple Layers of Laminated Ballistic Aramid Fibers (Front Facing)
For Front and Back Protection
Fits 10" X 12" Shooters Cut Plate Sizes
Flexible and Durable 7.4 oz. each
Made in U.S.A.
Includes One (1) Sleeve
Note: You Will Receive One (1) Spall Containment Sleeve With Your Order.
Note: Body Armor Plates Not Included.
Note: No Spall containment sleeve will stop 100% of spalling.
Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor And Spartan Shooters Cut Plate Carrier Entry Level Package
$311.82
$297.69
SPARTAN ARMOR SYSTEMS® "SPARTAN" SHOOTERS CUT PLATE CARRIER
Product Overview
The Spartan Armor Systems® "Spartan" Plate Carrier is true to its name: sleek, minimalist, and highly capable on the battlefield. Designed to be lightweight, agile, and to enable the wearer to rapidly engage, the Spartan Armor Systems® “Spartan” Shooters Cut Plate Carrier is designed for use with our shooters cut steel core armor: Spartan™ Omega™ AR500 and AR550. Adjustable from Medium to XL, this carrier fits 10”x12” shooters cut plates and will accommodate 6”x6” side plates in the cummerbund. The Spartan Shooters Cut Plate Carrier is built to last and gives you the key essential features you need without sacrificing quality. The Spartan Shooters Cut Carrier is a great entry-level carrier that offers a variety of features at an affordable price point. When the situation dictates less is more, this carrier delivers the goods where it counts.
Spartan Armor Systems® Spartan Shooters Cut Plate Carrier Specs:
Lightweight Plate Carrier That Accepts Side Plates
Designed For Spartan Armor Systems® 10” X 12” Shooters Cut Steel Core Plates
Adjustable From Medium To XL
PALS Webbing On Front And Back For Versatility And Customization
Velcro On Front And Back For Id Patch Placement
Cummerbund Is Designed To Hold 6” X 6” Side Plates Comfortably
Shoulder Pads Included
860 Denier Poly Construction
Reinforced Drag Handle
SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO
Product Overview
Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.
Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection
Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Exceptional Comfort & Engineering
You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.
Chest Plate Weight (per plate):
10"x12" Plate: Base Coat 8lbs 10oz.
Side Plate Weight (per plate):
6×6 approximately 2lbs 1oz (base coat)
Additional Spartan™ Omega™ AR500 Body Armor - Specs:
Made in U.S.A.
Meets NIJ 0101.06 Level III Specifications
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See A Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
22
Spartan Armor Systems Spartan™ Omega™ Ar500 Body Armor Active Shooter Kit / Police Tactical Gear
from $242.80
$231.78
PRODUCT DETAILS
Spartan Armor Systems Active Shooter Kit
Spartan™ Omega™ AR500 Body Armor with Hydra Plate Carrier. This active shooter kit set up is designed to allow a quick response time and comfortable performance fit with superior Level III Rifle Rated Protection. Carrier includes emergency drag handle, quick cinch adjustments for the front and hook and loop adjustments on the shoulders. The Spartan Armor Active Shooter Kit is perfect for rapid response situations.
Front map pocket
Emergency drag handle
Removable padded mesh shoulder pads with hook and loop guides
Adjustable shoulder straps
Hook and loop webbing
Heavyweight webbing for modular attachments
Padded mesh interior lining
Quick adjust cinches
Quick release buckles
Easy access plate pockets
Waist Size: 30″ – 46″ adjustable sizing
Accepts traditional Medium or Large SAPI plates up to 10.25″ x 13.25″. Best fit for our shooters cut and swimmers cut Spartan™ Omega™ AR500 Body Armor and AR550 Body Armor.
This package includes our Spartan™ Omega™ AR500 Body Armor 10x12 lab certified Armor. 1/4" thickness and provides the operator with Level III protection IAW NIJ0101.06 standards.
Our Spartan™ Omega™ AR500 Body Armor has also been tested to go beyond the Level III testing protocol (6 shots .308/M80 Ball, 2780 fps).
Special Threat Ratings:
SS109/M855 3148 fps 6 shots
.223 REM 60gr. Partition 2762 fps 6 shots
M43 MSC 2407 fps 6 shots
M67 Led Core 2375 fps 6 shoots
With all of our AR500 Omega™ Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates and secondary ballistics available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about the Spartan™ Omega™ AR500 Body Armor we use to construct out body armor!
Coating Options:
Choose the Full Coat option to have the plate lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™. The result is a plate approximately 1/2-5/8” total thickness. See our FAQ for more information about our Encapsaloc ™ process. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.
To learn more check out our blog on the coating options:
https://www.spartanarmorsystems.com/blog/encapsaloc-fragmentation-mitigation-antispall-body-armor-coating/
Chest Plate Weight (per plate): 10x12 Spartan™ Omega™ AR500 Body Armor Shooters Cut: Base Coat 8lbs 7oz. Full Coat 9lbs 3oz.
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
23
Spartan Armor Systems Hydra Plate Carrier And AR500 Omega™ Body Armor (Swimmers Cut) Platform
from $228.50
$218.14
The Hydra Plate Carrier is a highly adaptable carrier ideal for quick deployment and emergency situations such as active shooter scenarios. Easily adjustable buckles ensure a snug and comfortable fit on the sides. Ample length shoulder straps allow the Hydra plate carrier to be easily adjusted to fit a wide variety of body types. Breathable mesh is used at chest, back and shoulder contact points to allow for maximum breathability. The Hydra plate carrier is a great choice for anyone looking for a lightweight and versatile body armor configuration.
Front map pocket
Emergency drag handle
Removable padded mesh shoulder pads with hook and loop guides
Adjustable shoulder straps
Hook and loop webbing
Heavyweight webbing for modular attachments
Padded mesh interior lining
Quick adjust cinches
Quick release buckles
Easy access plate pockets
Waist Size: 30″ – 46″ adjustable sizing
Accepts Medium or Large SAPI plates up to 10.25″ x 13.25″
Constructed from lab certified AR500 Omega™ Armor, (1/4” thickness) these plates provide the operator with Level III protection IAW NIJ0101.06 standards.
With all of our AR500 Omega™ Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about the AR500 Omega™ Armor we use to construct out body armor!
Full Coat or Base Coat Options:
We are excited to announce our potentially “life saving” breakthrough! The strike face for our plates is mark embedded with our Spartan logo! Both sides of these plates are coated, however, the back side only has a “courtesy coat” to protect against wear and rust. The front of the plate is lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™. The result is a plate approximately 1/2-5/8” total thickness. See our FAQ for more information about our Encapsaloc ™ process. Due to popular demand, we have added a “base coat” only option for our AR500 Omega™ armor products. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.
Chest Plate Weight (per plate): 10x12 AR500 Omega™ Armor Swimmers Cut: Base Coat 7lbs 7oz. Full Coat 8lbs 1oz.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega™ Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
Spartan Armor Systems AR550 Body Armor Shooters Cut Set Of Two
from $189.52
$203.18
SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SHOOTERS CUT SET OF TWO
Product Overview
Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.
Protective Value Added
We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.
Battle Hardened
Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Blazing The Trail of Innovation
Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates.
Plate Weight (per plate):
8”x10” AR550 Shooters Cut: Base Coat 5lbs 5oz. Full Coat 6lbs 1oz.
10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz.
11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs.
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.
AR550 Body Armor - Shooters Cut Specs:
Made in U.S.A.
Special Threat Tested to Level III+ Standards
Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See a Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
21
Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Shooters Cut Set Of Two
from $149.62
$160.40
SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO
Product Overview
Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.
Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection
Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Exceptional Comfort & Engineering
You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.
Chest Plate Weight (per plate):
8”x10” Plate: Base Coat 5lbs 13oz. Full Coat 6lbs 7oz
10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz.
11"x14" Plate: Base Coat 10lbs 1oz. Full Coat 11lbs 6oz.
Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.
Additional Spartan™ Omega™ AR500 Body Armor - Specs:
Made in U.S.A.
Meets NIJ 0101.06 Level III Specifications
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See A Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
19
Spartan Armor Systems AR550 Body Armor Swimmers Cut Set Of Two
from $164.57
$176.44
Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor is specifically designed to feature a streamlined cut, which reduces overall weight, enhances mobility, comfort, and ergonomics in the field while affording this higher degree of threat protection.
SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SWIMMERS CUT SET OF TWO
Product Overview
Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor is specifically designed to feature a streamlined cut, which reduces overall weight, enhances mobility, comfort, and ergonomics in the field while affording this higher degree of threat protection. As with our other AR550 body armor products, Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications.
Protective Value Added
We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.
Battle Hardened
Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.
Blazing The Trail of Innovation
Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates.
Chest Plate Weight (per plate):
8x10 AR550 Swimmers Cut: Base Coat 4lbs 6oz. Full Coat 4lbs 14oz.
10x12 AR550 Swimmers Cut: Base Coat 6lbs 10oz. Full Coat 7lbs 8oz.
11x14 AR550 Swimmers Cut: Base Coat 8lbs 5oz. Full Coat 8lbs 13oz.
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.
AR550 Body Armor - Swimmers Cut Specs:
Made in U.S.A.
Special Threat Tested to Level III+ Standards
Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See a Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
9
Spartan™ Omega™ AR500 Body Armor Side Plates Set Of Two
from $67.58
$72.46
SPARTAN™ OMEGA™ AR500 BODY ARMOR SIDE PLATES
Product Overview
Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. Spartan™ Omega™ AR500 plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.
Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection
Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Side Plate Weight (per plate):
6×6 approximately 2lbs 1oz (base coat) or 2lbs 15oz (full coat)
6×8 approximately 3lbs 10oz (base coat) or 3lbs 14oz (full coat)
Additional Spartan™ Omega™ AR500 Body Armor - Specs:
Made in U.S.A.
Meets NIJ 0101.06 Level III Specifications
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See A Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
Spartan Armor Systems AR550 Body Armor Side Plates Set Of Two
from $67.58
$72.46
Level III+ Spartan AR550 Armor
We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor! With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!
Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive two side plates. Choose from either 6″ x 6″ (small) or 6″ x 8″ (large)
Side Plate Weight (per plate): 6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6 oz (base coat), 3lbs 12oz (full coat).
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Please see our FAQ for weight specifications and other questions you may have.
As with all of our AR550 Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
See A Comparison of Our Full Line of Body Armor:
23
Spartan Armor Systems Spartan Sentinel Plate Carrier And Spartan™ Omega™ AR500 Body Armor Platform
from $330.67
$354.51
SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER
Product Overview
The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.
Ready For Anything
Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike.
Spartan Armor Systems® Sentinel Plate Carrier Specs:
Adjustable from 38" To 48" Chest Size
Durable Emergency Drag Handle
Anti-slip Shoulder Padding With Velcro
Side Release Buckles On The Internal Waist Strap
Padded Mesh Separators For The Interior Of The Carrier For Breathability
Fits 10" X 12" Shooters Cut Plates
Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor
Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side
Velcro On The Back Of The Carrier Measures 9” X 3”
Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time
1000 Denier
Bottom Loading
Weighs Approximately 2lbs. 9oz.
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.
SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO
Product Overview
Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.
Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection
Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Exceptional Comfort & Engineering
You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.
Chest Plate Weight (per plate):
10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz.
Side Plate Weight (per plate):
6×6 approximately 2lbs 1oz (base coat) or 2lbs 15oz (full coat)
6×8 approximately 3lbs 10oz (base coat) or 3lbs 14oz (full coat)
Additional Spartan™ Omega™ AR500 Body Armor - Specs:
Made in U.S.A.
Meets NIJ 0101.06 Level III Specifications
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See A Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
24
Spartan Armor Systems Level III+ AR550 And Legion Xl Plate Carrier Package
from $430.49
$461.53
Sentinel Legion XL Plate Carrier Specs:
Durable Emergency Drag Handle
Anti-slip Shoulder Padding With Velcro
Side Release Buckles On The Internal Waist Strap
Elevated Mesh Allowing For Extreme Breathability
Holds 11"X14" Front And Back Plates
Removable Cummerbund With Side Plate Pockets For 6"X6" And 6"X8" Armor
Velcro In Front Of The Carrier Is 8"x4" With A Velcro Loop On Each Side
Velcro On The Back Of The Carrier Measures 9x3
Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time
1000 Denier
Bottom Loading
Weighs Approximately 3lbs. 9oz.
Shooters Cut Plate Weight (per plate):.
11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Side Plate Weight (per plate):
6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat)
6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat)
AR550 Body Armor - Shooters Cut Specs:
Made in U.S.A.
Special Threat Tested to Level III+ Standards
Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
SPARTAN ARMOR SYSTEMS® SENTINEL LEGION XL PLATE CARRIER
The Spartan Armor Systems® Legion XL Plate Carrier is rugged, reliable, and fully adjustable from 2XL-4XL. Designed to hold our 11”x14” body armor plates, the Legion XL can also accommodate 6”x6” or 6”x8” side plates for additional protection and features a completely removable cummerbund.
Developed For You
Born of numerous customer inquiries and feedback, we developed the Sentinel Legion XL Plate Carrier to be adjustable from a 2XL-4XL size. The Sentinel Legion XL weighs in at approximately 3lbs. 9oz., will hold our Steel Core AR500 Omega and AR550 11”x14” body armor plates, while also offering the option to add in 6"x6" or 6"x8" side plates. If you don't want to run the Sentinel Legion XL with the cummerbund - no sweat! The cummerbund is easily removable so you can run your plate carrier with just the front and back plates or the full set-up with side plates.
Comfort And Convenience
The Spartan Armor Systems® Legion XL Plate Carrier includes features designed for customization, modularity, and comfort while affording supreme protection in the field. Anti-slip shoulder padding with velcro, side release buckles on the waist strap, and elevated mesh for breathability make this one big, bad, carrier.
Sentinel Legion XL Plate Carrier Specs:
Durable Emergency Drag Handle
Anti-slip Shoulder Padding With Velcro
Side Release Buckles On The Internal Waist Strap
Elevated Mesh Allowing For Extreme Breathability
Holds 11"X14" Front And Back Plates
Removable Cummerbund With Side Plate Pockets For 6"X6" And 6"X8" Armor
Velcro In Front Of The Carrier Is 8"x4" With A Velcro Loop On Each Side
Velcro On The Back Of The Carrier Measures 9x3
Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time
1000 Denier
Bottom Loading
Weighs Approximately 3lbs. 9oz.
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.
SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO
Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.
Protective Value Added
We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.
Battle Hardened
Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Blazing The Trail of Innovation
Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates.
Shooters Cut Plate Weight (per plate):.
11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Side Plate Weight (per plate):
6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat)
6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat)
AR550 Body Armor - Shooters Cut Specs:
Made in U.S.A.
Special Threat Tested to Level III+ Standards
Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See a Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
24
Spartan Armor Systems AR500 And Legion Xl Plate Carrier Package
from $392.12
$420.40
Specifications:
Durable emergency drag handle
Anti-Slip shoulder padding w/ velcro
Side release buckles on internal waist strap
Elevated mesh allowing for extreme breathability
Holds 11x14 Front and Back Plates
Removable cummerbund with side plate pockets for 6x6 and 6x8 armor
Velcro in front of the Carrier is 8x4 w/ a velcro loop on each side
Velcro on the back of the Carrier measures 9x3
Stronger carrier material that can withstand through wear and tear over a long period of time
1000 denier
Bottom loading
Spartan Armor Systems Sentinel Legion XL Plate Carrier with Level III AR500 Plates
You asked for it, we produced it. We value our customers opinions and suggestions, from all the recommendations we've had for the next plate carrier design, we came up with a Sentinel Legion XL Plate Carrier that is fully adjustable from a 2XL-4XL. It will hold our Steel Core AR500 Omega, and AR550 11x14 body armor plates true to form. You also have the option to add in 6x6 or 6x8 side plates. If you don't want to run with the cummerbund no problem! The cummerbund is completely removable to run your plate carrier with just front and back plates or the full set up with side plates. User friendly.
Specifications:
Durable emergency drag handle
Anti-Slip shoulder padding w/ velcro
Side release buckles on internal waist strap
Elevated mesh allowing for extreme breathability
Holds 11x14 Front and Back Plates
Removable cummerbund with side plate pockets for 6x6 and 6x8 armor
Velcro in front of the Carrier is 8x4 w/ a velcro loop on each side
Velcro on the back of the Carrier measures 9x3
Stronger carrier material that can withstand through wear and tear over a long period of time
1000 denier
Bottom loading
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates!
24
Spartan Armor/Sentinel Plate Carrier And AR550 Level III+ Body Armor Package
from $374.54
$401.54
SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER
Product Overview
The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.
Ready For Anything
Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike.
Spartan Armor Systems® Sentinel Plate Carrier Specs:
Adjustable from 38" To 48" Chest Size
Durable Emergency Drag Handle
Anti-slip Shoulder Padding With Velcro
Side Release Buckles On The Internal Waist Strap
Padded Mesh Separators For The Interior Of The Carrier For Breathability
Fits 10" X 12" Shooters Cut Plates
Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor
Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side
Velcro On The Back Of The Carrier Measures 9” X 3”
Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time
1000 Denier
Bottom Loading
Weighs Approximately 2lbs. 9oz.
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.
SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO
Product Overview
Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.
Protective Value Added
We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.
Battle Hardened
Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Blazing The Trail of Innovation
Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates.
Shooters Cut Plate Weight (per plate):.
10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. or Full Coat 8lbs 10oz.
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Side Plate Weight (per plate):
6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat)
6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat).
AR550 Body Armor - Shooters Cut Specs:
Made in U.S.A.
Special Threat Tested to Level III+ Standards
Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See a Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
12
Spartan Armor Systems Spartan Omega AR500 Body Armor And Sentinel Swimmers Plate Carrier Package
from $318.79
$341.78
SPARTAN ARMOR SYSTEMS SENTINEL SWIMMERS PLATE CARRIER
Durable emergency drag handle
Anti-Slip shoulder padding w/ velcro
Side release buckles on internal waist strap
Padded elevated mesh on interior of carrier for breathability
Fits 10x12 Swimmers cut plates
Removable cummberbund with side plate pockets for 6x6 and 6x8 side plate armor
Velcro in front of the Carrier is 8x4 w/ a velcro loop on each side
Velcro on the back of the Carrier measures 9x3
Stronger carrier material that can withstand through wear and tear over a long period of time
1000 denier
Bottom loading
Weighs approximately 2lbs. 9oz.
NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems. We can not guarantee a fit with plates made by other manufacturers.
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates!
14
Spartan Armor Systems AR550 Leonidas Plate Carrier Package
from $502.56
$538.80
Advanced plate carrier that is feature packed
500 Denier
Front Top Zippered Admin Pouch
Front Lower Velcro kangaroo pouch
PALS web attachment points covering the front, back and shoulders of the vest
Mil spec laser cut PALS Webbing on the shoulders
Cummerbund is designed to hold a 5"x15" IIIA soft armor inside each side.
Cummerbund has a proprietary retained shock cord system to allow stretch while being held in place to stop sagging.
Cummerbund is removable and the carrier is equipped with removable quick release buckles
Genuine US Mil Spec Webbing
Velcro on the back Drag Handle keeps it in place
Heavy Duty bar tacking at key stress points
Communication or hydration hose guides
Padded Front and back interior of carrier with airflow channels sewn in
Front and back areas of Velcro for identifiers
Bottom Loading Plate Pockets accepts 10x12, SAPI and Similar Armor
All pieces Made in USA, assembled in Mexico
*Note* This plate carrier by itself will only hold 5x15 Soft Armor Panels, this package will come with a molle system to attach on your 6x6 or 6x8 side plates.
Leonidas Plate Carrier System with AR550 Omega Body Armor
The Leonidas plate carrier is an advanced plate carrier system is fit for a Spartan King, hence the name "Leonidas". This versatile plate carrier hosts a wide variety of proven features including a removable cummerbund. When you are looking for the toughest plate carrier available to take into battle this is it. Take a look at all the features below.
Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.
Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?
Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.
Advanced plate carrier that is feature packed
500 Denier
Front Top Zippered Admin Pouch
Front Lower Velcro kangaroo pouch
PALS web attachment points covering the front, back and shoulders of the vest
Mil spec laser cut PALS Webbing on the shoulders
Cummerbund is designed to hold a 5"x15" IIIA soft armor inside each side.
Cummerbund has a proprietary retained shock cord system to allow stretch while being held in place to stop sagging.
Cummerbund is removable and the carrier is equipped with removable quick release buckles
Genuine US Mil Spec Webbing
Velcro on the back Drag Handle keeps it in place
Heavy Duty bar tacking at key stress points
Communication or hydration hose guides
Padded Front and back interior of carrier with airflow channels sewn in
Front and back areas of Velcro for identifiers
Bottom Loading Plate Pockets accepts 10x12, SAPI and Similar Armor
All pieces Made in USA, assembled in Mexico
*Note* This plate carrier by itself will only hold 5x15 Soft Armor Panels, this package will come with a molle system to attach on your 6x6 or 6x8 side plates.
Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel perfectly hits the “sweet spot”. It’s much harder than AR500, but not too hard to cause severe stress while forming.
Our AR550 Spartan Body Armor now has the option of Advanced Triple Curve (ATC). An industry FIRST! Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates, and optional side plates
Level III+ Side Plates: Choose from either 6″ x 6″ (small) or 6″ x 8″ (large)
Full Coat or Base Coat Options:
We are excited to announce our potentially “life saving” breakthrough! The strike face for our plates is mark embedded with our Spartan logo! Both sides of these plates are coated, however, the back side only has a “courtesy coat” to protect against wear and rust. The front of the plate is lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™. The result is a plate approximately 1/2-5/8” total thickness. See our FAQ for more information about our Encapsaloc ™ process. By purchasing, you will receive (2) Formed Spartan™ Omega™ AR500 Body Armor 10″x12” chest plates. Due to popular demand, we have added a “base coat” only option for our AR500 Omega™ armor products. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.
24
Spartan Armor Systems Spartan AR550 Body Armor And Tactical Response Kit
from $317.94
$340.86
Spartan Armor Systems Spartan AR550 Body Armor And Tactical Response Kit
When purchasing this package you will receive:
(1) Tactical Response Laser Cut Plate Carrier (Black, Coyote Brown, OD Green).
(2) 10x12 Spartan AR550 Body Armor Shooters Cut Chest/Back Plates.
Plate Carrier Specs:
1000 Denier Materials
Light weight and Duty 1000 Denier laser Cut Molle
Zippered Admin Pouch
Kangaroo pouch with removable triple M4 Pouches
Padded Shoulder Pads
Padded Front and rear with ventilation vents
Low Profile Drag Handle
Molle Velcro front and rear for Identifier Patches
2-inch replaceable quick release buckles
Accepts 10" x 12" Body Armor
Comes with a Storage Bag
Fits S to XL
Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.
Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?
Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.
Buy Body Armor - Level III+ Spartan AR550 Armor
We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor! With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!
Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming.
Advanced Triple Curve (ATC) AR550 Spartan Body Armor. An industry FIRST! Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Level III+ Side Plates: Choose from either 6″ x 6″ (small) or 6″ x 8″ (large)
Chest Plate Weight (per plate): 10x12 AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz.
Side Plate Weight (per plate): 6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6oz (base coat), 3lbs 12oz (full coat).
Thickness: .25″ AR550 plus approximately .25″ coating (full coat) makes this slim profile plate overall .5-.6″ in total thickness
As with all of our Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
10
Spartan Armor AR550 Level III+ Body Armor And 221B Tactical Phantom Plate Carrier
from $373.95
$399.94
FEATURES:
Maxx-Dri Technology offers 100% breathability compared to traditional PCs
Ultra Lightweight
Ultra Fast Donning and Doffing
Ideal for donning over a Police Uniform
Lightning Fast Infinity Adjustment System for a truly Custom Fit
Anti-Gravity weight management technology
Heavy Duty Mil-spec construction
Heavy Duty Genuine YKK buckles and straps
Molle and Velcro Molle front and rear
Front Velcro for ID patches
Heavy Duty Rear Drag/Rescue Handle
Available with rifle and pistol mag pouches and pistol holster (chest)
(2) LEVEL 3+ AR550 10x12 Shooters Cut Plates
This plate carrier was designed by 221B Tactical
SIZING:
One Size Fits All (Adjustable Heavy Duty Genuine YKK Side Release Buckles and Straps)
Spartan Armor AR550 Level III+ Body Armor and 221B Tactical Phantom Plate Carrier
Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.
Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?
Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.
FEATURES:
Maxx-Dri Technology offers 100% breathability compared to traditional PCs
Ultra Lightweight
Ultra Fast Donning and Doffing
Ideal for donning over a Police Uniform
Lightning Fast Infinity Adjustment System for a truly Custom Fit
Anti-Gravity weight management technology
Heavy Duty Mil-spec construction
Heavy Duty Genuine YKK buckles and straps
Molle and Velcro Molle front and rear
Front Velcro for ID patches
Heavy Duty Rear Drag/Rescue Handle
Available with rifle and pistol mag pouches and pistol holster (chest)
(2) LEVEL 3+ AR550 10x12 Shooters Cut Plates
This plate carrier was designed by 221B Tactical
SIZING:
One Size Fits All (Adjustable Heavy Duty Genuine YKK Side Release Buckles and Straps)
7
Spartan Armor Systems Spartan Omega AR500 Body Armor And Tactical Response Kit
from $268.06
$287.39
When purchasing this package you will receive:
(1) Tactical Response Laser Cut Plate Carrier (Black, Coyote Brown, OD Green).
(2) 10x12 Spartan™ Omega™ AR500 Body Armor Shooters Cut Chest/Back Plates.
Plate Carrier Specs:
1000 Denier Materials
Light weight and Duty 1000 Denier laser Cut Molle
Zippered Admin Pouch
Kangaroo pouch with removable triple M4 Pouches
Padded Shoulder Pads
Padded Front and rear with ventilation vents
Low Profile Drag Handle
Molle Velcro front and rear for Identifier Patches
2-inch replaceable quick release buckles
Accepts 10" x 12" Body Armor
Comes with a Storage Bag
Fits S to XL
Constructed from lab certified Spartan™ Omega™ AR500 Body Armor, (1/4” thickness) these plates provide the operator with Level III protection IAW NIJ0101.06 standards.
With all of our Spartan™ Omega™ AR500 Body Armor products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about the steel we use to construct out body armor!
You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die. Or with our Advanced Triple Curve ™. Instead of bending our formed plates in 2 different locations as we used to, we have machined custom tooling to give these plates a nice curvature to best conform to the side of your torso. Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems’ ATC™ body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC™ armor better “hugs” the operator’s body, resulting in a significant increase in comfort. Our CNC equipment capabilities have allowed us to create dies which form our body armor without any “crease” bends. Crease bends, “work hardens” the plate and causes a significant amount of stress to the portion of the plate under load. We HIGHLY suggest when doing research to ask if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems™ has gone the extra mile to create this die process.
Full Coat or Base Coat Options:
We are excited to announce our potentially “life saving” breakthrough! The strike face for our plates is mark embedded with our Spartan logo! Both sides of these plates are coated, however, the back side only has a “courtesy coat” to protect against wear and rust. The front of the plate is lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™. The result is a plate approximately 1/2-5/8” total thickness. See our FAQ for more information about our Encapsaloc ™ process. Due to popular demand, we have added a “base coat” only option for our AR500 armor products. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.
Chest Plate Weight (per plate): 10x12 Spartan™ Omega™ AR500 Body Armor Shooters Cut: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz.
Side Plate Weight (per plate): 6×6 approximately 2lbs 1oz (base coat) 2lbs 15oz (full coat), 6×8 approximately 3lbs 10oz (base coat) 3lbs 14oz (full coat).
Advanced Triple Curve™ (ATC) Spartan™ Omega™ AR500 Body Armor | Spartan Armor Systems™
With our Spartan™ Omega™ AR500 Body Armor Advanced Triple Curve™ body armor, the operator now has increased comfort. The Spartan™ Omega™ AR500 Body Armor, cut from genuine lab-certified Omega Armor, offers advanced Level III protection. We’ve taken everything in to consideration, to include ergonomics, functionality, and price point.
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
See A Comparison of Our Full Line of Body Armor:
26
Spartan Armor Systems Spartan Omega AR500 Body Armor And Sentinel Plate Carrier Package
$327.95
$351.32
SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER
Product Overview
The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.
Ready For Anything
Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike.
Spartan Armor Systems® Sentinel Plate Carrier Specs:
Adjustable from 38" To 48" Chest Size
Durable Emergency Drag Handle
Anti-slip Shoulder Padding With Velcro
Side Release Buckles On The Internal Waist Strap
Padded Mesh Separators For The Interior Of The Carrier For Breathability
Fits 10" X 12" Shooters Cut Plates
Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor
Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side
Velcro On The Back Of The Carrier Measures 9” X 3”
Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time
1000 Denier
Bottom Loading
Weighs Approximately 2lbs. 9oz.
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.
SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO
Product Overview
Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. Spartan Omega AR500 plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.
Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection
Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Exceptional Comfort & Engineering
You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.
Chest Plate Weight (per plate):
10"x12" Plate: Base Coat 8lbs 10oz.
Side Plate Weight (per plate):
6×6 approximately 2lbs 1oz (base coat)
Additional Spartan™ Omega™ AR500 Body Armor - Specs:
Made in U.S.A.
Meets NIJ 0101.06 Level III Specifications
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See A Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
24
Spartan Armor Systems Level III+ AR550 Certified Plates And Sentinel Plate Carrier Package
$427.96
$458.81
Spartan AR550 Body Armor and Sentinel Plate Carrier Package
Fits 38" to 48" chest size
Durable emergency drag handle
Anti-Slip shoulder padding w/ velcro
Side release buckles on internal waist strap
Padded mesh separators for the interior of carrier for breathability
Removable cummerbund with side plate pockets for 6x6 and 6x8 side plate armor
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates!
Velcro in front of the Carrier is 8x4
Velcro on the back of the Carrier is 9x3
Stronger carrier material that can withstand through wear and tear over a long period of time
1000 denier
Bottom loading
By purchasing you will receive:
Set of Two 10x12 AR550 Body Armor Single Curve, Full Coat
Set of Two AR550 Side Plates Base Coat
One Sentinel Plate Carrier (your choice in color)
Level III+ Side Plates: 6″ x 6″
Chest Plate Weight (per plate): 10x12 AR550 Shooters Cut Full Coat: 8lbs 10oz.
Side Plate Weight (per plate): 6×6 approximately 2lbs 9oz (base coat)
Thickness: .25″ AR550
Spartan Armor Systems AR550 Level III+ Armor NIJ Certified with Spartan Sentinel Plate Carrier
Package includes both front and back AR550 shooters cut steel armor plates with a single curve, with full coat of Encapsuloc™ anti-fragmentation coating, two 6x6 side plates (base coat) and Spartan Sentinel Plate Carrier.
Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?
Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.
Spartan AR550 Body Armor and Sentinel Plate Carrier Package
Fits 38" to 48" chest size
Durable emergency drag handle
Anti-Slip shoulder padding w/ velcro
Side release buckles on internal waist strap
Padded mesh separators for the interior of carrier for breathability
Removable cummerbund with side plate pockets for 6x6 and 6x8 side plate armor
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates!
Velcro in front of the Carrier is 8x4
Velcro on the back of the Carrier is 9x3
Stronger carrier material that can withstand through wear and tear over a long period of time
1000 denier
Bottom loading
By purchasing you will receive:
Set of Two 10x12 AR550 Body Armor Single Curve, Full Coat
Set of Two AR550 Side Plates Base Coat
One Sentinel Plate Carrier (your choice in color)
Buy Body Armor - Level III+ Spartan AR550 Armor
We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor! With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!
Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates. Note: AR550 side plates are NIJ compliant, are not NIJ certified.
Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming.
With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Level III+ Side Plates: 6″ x 6″
Chest Plate Weight (per plate): 10x12 AR550 Shooters Cut Full Coat: 8lbs 10oz.
Side Plate Weight (per plate): 6×6 approximately 2lbs 9oz (base coat)
Thickness: .25″ AR550
Spartan Armor Systems AR550 Body Armor Swimmers Cut And Spartan Plate Carrier Entry Level Package
$316.95
$338.81
The "Spartan" Swimmers Cut Plate Carrier is adjustable from Medium to XL When purchasing this package you will receive: (1) "Spartan" Swimmers Cut Plate Carrier (2) AR550 10x12 Swimmers Cut Body Armor Chest/Back Plates, Single Curve, Base Coat (2) AR550 6x6 Body Armor Side Plates, Curved, Base Coat
While Supplies Last....
"Spartan" Swimmers Cut Plate Carrier with AR550 Level III+ Body Armor (Front, Back and Side Plates)
When purchasing this package you will receive:
(1) "Spartan" Swimmers Cut Plate Carrier (Choose between, Black, OD Green, Tan or Wolf Gray)(2) AR550 10x12 Swimmers Cut Body Armor Chest/Back Plates, Single Curve, Base Coat(2) AR550 6x6 Omega Body Armor Side Plates, Curved, Base Coat
With all of our AR500, AR550 & AR650 Armaply Spartan Armor Systems™ products, we only use ballistic grade LAB CERTIFIED Steel! All purchases of our Spartan Armor products have current lab certificates included. Remember, not all body armor is created equal!
Weight on the AR550 Swimmers Cut Plates: Base Coat 10x12: 6lbs 10OZ 6x6 Side Plates: 2lbs 9oz
Features of the Spartan Carrier:
Adjustable from Medium to XL.
Designed for our Steel Core armor plates.
Molle on front and back for versatility. Velcro on front and back for patch placement.
Cummerbund is designed to hold 6x6 side plates comfortably.
Shoulder pads included.
860 Denier Poly construction.
Reinforced drag handle
Designed in the USA
NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems. We can not guarantee a fit with plates made by other manufacturers.
Level III+ Spartan AR550 Armor
We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor! With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!
Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming.
With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Chest Plate Weight (per plate): 10x12 AR550 Swimmers Cut: Base Coat 6lbs 10oz.
Side Plate Weight (per plate): 6×6 approximately 2lbs 9oz (base coat)
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Please see our FAQ for weight specifications and other questions you may have.
As with all of our AR550 Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
See A Comparison of Our Full Line of Body Armor:
26
Spartan Armor Systems AR550 Body Armor Shooters Cut And Spartan Plate Carrier Entry Level Package
$324.51
$347.91
SPARTAN ARMOR SYSTEMS® "SPARTAN" SHOOTERS CUT PLATE CARRIER
Product Overview
The Spartan Armor Systems® "Spartan" Plate Carrier is true to its name: sleek, minimalist, and highly capable on the battlefield. Designed to be lightweight, agile, and to enable the wearer to rapidly engage, the Spartan Armor Systems® “Spartan” Shooters Cut Plate Carrier is designed for use with our shooters cut steel core armor: Spartan™ Omega™ AR500 and AR550. Adjustable from Medium to XL, this carrier fits 10”x12” shooters cut plates and will accommodate 6”x6” side plates in the cummerbund. The Spartan Shooters Cut Plate Carrier is built to last and gives you the key essential features you need without sacrificing quality. The Spartan Shooters Cut Carrier is a great entry-level carrier that offers a variety of features at an affordable price point. When the situation dictates less is more, this carrier delivers the goods where it counts.
Spartan Armor Systems® Spartan Shooters Cut Plate Carrier Specs:
Lightweight Plate Carrier That Accepts Side Plates
Designed For Spartan Armor Systems® 10” X 12” Shooters Cut Steel Core Plates
Adjustable From Medium To XL
PALS Webbing On Front And Back For Versatility And Customization
Velcro On Front And Back For Id Patch Placement
Cummerbund Is Designed To Hold 6” X 6” Side Plates Comfortably
Shoulder Pads Included
860 Denier Poly Construction
Reinforced Drag Handle
SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO
Product Overview
Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.
Protective Value Added
We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.
Battle Hardened
Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Blazing The Trail of Innovation
Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates.
Shooters Cut Plate Weight (per plate):.
10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz.
Thickness: .25″
Side Plate Weight (per plate):
6×6 approximately 2lbs 9oz (base coat)
AR550 Body Armor - Shooters Cut Specs:
Made in U.S.A.
Special Threat Tested to Level III+ Standards
Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See a Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
Predator Armor Level III+ Shooters Cut
from $100.02
$101.85
Features:
Dimensions: 10” x 12” shooter cut
Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor
Single Curve
Stab and Slash Resistant
Kevlar lined to protect against spall and frag (optional)
Durable and water resistant coating on plate
Maintenance Free
Thickness .25”
Designed to be used as a front or back plate
Lightweight
Approximate Weight: 7.5 lb’s
100% Made in the USA
Predator Armor Level III+ Shooters Cut
Predator Armor Level III+ Body Armor is manufactured in the U.S. using ballistic grade steel and has the option for a kevlar lined spall and fragmentation protective layer. Our plates use a unique heat-treating, quenching and tempering process that results in an extra hardened steel. Predator Armor plates are lightweight, impact-resistant steel that hold superior ballistic properties. This allows us to use thinner plates without sacrificing protection levels.
All of our plates come with a base coat that aesthetically enhances the plate as well as provides durable characteristics. This coating does not provide fragmentation mitigation. You have the option to add kevlar lining to your plate. This provides anti spall and frag characteristics. It also enhances the performance of your plate. If your carrier does not have anti frag characteristics it is strongly advised to include the kevlar lining.
Features:
Dimensions: 10” x 12” shooter cut
Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor
Single Curve
Stab and Slash Resistant
Kevlar lined to protect against spall and frag (optional)
Durable and water resistant coating on plate
Maintenance Free
Thickness .25”
Designed to be used as a front or back plate
Lightweight
Approximate Weight: 7.5 lb’s
100% Made in the USA
Predator Armor Level III Shooters Cut
from $66.68
$66.20
Features:
Dimensions: 10” x 12” shooter cut
Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor
Single Curve
Stab and Slash Resistant
Kevlar lined to protect against spall and frag (optional)
Durable and water resistant coating on plate
Maintenance Free
Thickness .25”
Designed to be used as a front or back plate
Lightweight
Approximate Weight: 7.5 lb’s
100% Made in the USA
Predator Armor Level III Shooters Cut
Predator Armor Level III Body Armor is manufactured in the U.S. using ballistic grade steel and has the option for a kevlar lined spall and fragmentation protective layer. Our plates use a unique heat-treating, quenching and tempering process that results in an extra hardened steel. Predator Armor plates are lightweight, impact-resistant steel that hold superior ballistic properties. This allows us to use thinner plates without sacrificing protection levels. Our ballistic steel plate is tested to NIJ standards.
All of our plates come with a base coat that aesthetically enhances the plate as well as provides durable characteristics. This coating does not provide fragmentation mitigation. You have the option to add kevlar lining to your plate. This provides anti spall and frag characteristics. It also enhances the performance of your plate. If your carrier does not have anti frag characteristics it is strongly advised to include the kevlar lining.
Features:
Dimensions: 10” x 12” shooter cut
Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor
Single Curve
Stab and Slash Resistant
Kevlar lined to protect against spall and frag (optional)
Durable and water resistant coating on plate
Maintenance Free
Thickness .25”
Designed to be used as a front or back plate
Lightweight
Approximate Weight: 7.5 lb’s
100% Made in the USA
Our Testing Target is a smaller cut from the same material as the Level III Plates. It is an add on item you can order with your plates and test the body armor out for yourself. We guarantee our plates will meet the Level III standards. Add a test plate to your order and try it yourself. If it does not meet the standards we will refund your order.