Spartan Armor Systems: Unmatched Ballistics Protection

The Target Man™ “Heads Up” AR500 Reactive Steel Shooting Target   This set up comes pre-welded. “Heads Up” is a reactive target system constructed from ballistic grade AR500. Heads Up doubles as a pertinent target head shot and gut shot target aid…. both of which are essential impact points for self defense. Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”.“Heads Up” is available with and without our patent-pending Multi-Purpose Base (MPB) and .22 Mild Steel Paddle.  Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY "Heads Up” AR500 Reactive Steel Shooting Target DIY "Heads Up” is a reactive target system constructed from ballistic grade AR500. DIY "Heads Up" doubles as a pertinent target head shot and gut shot target aid…. both of which are essential impact points for self defense. Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”.This kit is available in a few different configurations for all budget levels. DIY "Heads Up” is available with or without our patent-pending Multi-Purpose Base (MPB) and .22 Mild Steel Paddle. The DIY "Heads Up” is un-welded, but don’t worry as assembly is as easy as 1-2-3: (1) Assemble slotted “throat” (aka target holding fixture) like a puzzle using the slotted/tabbed pieces. Ensure all pieces are “square”. (2) Tack the kit into position with your welder. (3) Start welding!Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ “Triple Tap” – AR500 Steel Reactive Shooting TargetTriple Tap is a new 3-stage reactive target system constructed from ballistic grade AR500. When it’s manufactured by The Target Man™, you know you’re getting a quality tactical training aid!This three way target system is perfect for someone to enhance their tactical shooting skills. Here you have a head shot, hostage target, and center mass shot, and now a gut shot – all in one! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. We’ve engineered this to ensure your training focuses on all of the “take down” areas of the bad guy!This kit is available in a few different configurations for all budget levels. Here you are purchasing a pre-welded target with a throat. You can save by purchasing the un-welded kit and fab up your own base. This version is found in our DIY AR500 Target section. Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Gut Shot target hole: 9″ wide Hostage reactive paddle width: 5″ Target comes unpainted. We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ “Snipers Paradise” – AR500 Reactive Steel Shooting Target ** This version of our target comes pre-welded with a throat. You will need a base and angle iron to use the target. ***“Snipers Paradise” (named by FaceBook fan Alex A!!) is a 3-stage reactive target system constructed from ballistic grade AR500. This three way target system is perfect for someone to enhance their tactical shooting skills. Here you have a head shot, hostage target, and center mass shot all in one! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”.This kit is available with or without our patent-pending Multi-Purpose Base (MPB) and .22 Mild Steel Paddles. You can also purchase this kit un-welded in our DIY Shooting Targets section. Our setup is designed to be used with 46" angle iron with the dimensions of 1.5″x.25″. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally. Target Specifications….. Target height: 21.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ Target comes unpainted. We recommend using 46" angle iron for his target. This is basically a 2/3 scale IPSC  See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ Head Shot Gut Shot (HSGS) – AR500 Reactive Steel Shooting TargetHead Shot Gut Shot (HSGS)!! 4-stage reactive target system constructed from ballistic grade AR500. This four way target system is perfect for someone to enhance their tactical shooting skills. Here you have a head shot, gut shot, center mass shot, and a tactical “slap paddle” (to reset the center mass target)! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”.This kit is available in a few different configurations for all budget levels. This kit is pre-welded and you have the option to purchase it  with and without the our patent-pending Multi-Purpose Base (MPB) and you can also purchase this kit un-welded in our DIY Steel Target section. Save some decent coin by purchasing the un-welded kit and fab up your own base. If you’re purchasing the kit un-welded, don’t worry as assembly is as easy as 1-2-3. (1) Assemble slotted “throat” (aka target holding fixture) like a puzzle using the slotted/tabbed pieces. Ensure all pieces are “square”. (2) Tack the kit in to position with your welder. (3) Start welding!Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally. Target Specifications….. Target height: 19.5″ (with head in up position) Target width: 12″ Target comes unpainted. We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY “Triple Tap” – AR500 Steel Reactive Shooting TargetTriple Tap is a new 3-stage reactive target system constructed from ballistic grade AR500. When it’s manufactured by The Target Man™, you know you’re getting a quality tactical training aid!This three way target system is perfect for someone to enhance their tactical shooting skills. Here you have a head shot, hostage target, and center mass shot, and now a gut shot – all in one! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. We’ve engineered this to ensure your training focuses on all of the “take down” areas of the bad guy!This kit is available in a few different configurations for all budget levels. Here you are purchasing an un-welded kit, you can find a welded version in our "Reactive Steel Targets" section. You will also get an un-welded throat assembly. You will have to source your own angle iron and you can choose to purchase our MPB Multi Purpose Base or fabricate your own. Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Gut Shot target hole: 9″ wide Hostage reactive paddle width: 5″ Target comes unpainted. We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY “Snipers Paradise” – AR500 Reactive Steel Shooting Target“Snipers Paradise” (named by FaceBook fan Alex A) is a 3-stage reactive target system constructed from ballistic grade AR500 steel. All of our targets are laser cut for precision.  This three way target system is an excellent way to enhance your tactical shooting skills. Here you have a head shot, hostage target, and center mass shot all in one! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”. We offer this kit in a welded and DIY configuration for all budget levels and it is available with or without our patent-pending Multi-Purpose Base (MPB). You can also add .22, Mild Steel Paddles. To purchase this kit welded click here. The DIY Snipers Paradise assembly is as easy as 1-2-3.   Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets WITHOUT the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add On section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. We recommend you source it locally.   By purchasing the DIY Snipers Paradise you will receive: AR500 IPSC Target With Head and Chest Holes  Two Pivot Tubes Two AR500 Paddles for Target Un-welded Throat Assembly  Detailed Instructions Target Specifications….. Target height: 21.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ Target comes unpainted. Weight: 33lbs   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY Head Shot Gut Shot (HSGS) – AR500 Reactive Steel Shooting TargetHead Shot Gut Shot (HSGS)!! 4-stage reactive target system constructed from ballistic grade AR500. This four way target system is perfect for someone to enhance their tactical shooting skills. Here you have a head shot, gut shot, center mass shot, and a tactical “slap paddle” (to reset the center mass target)! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”.This kit is available in a few different configurations for all budget levels. This kit is a DIY un-welded version. You have the option to purchase it  with and without the our patent-pending Multi-Purpose Base (MPB) and you can also purchase this kit welded and ready to go in our Reactive Steel Target section. Save some decent coin by purchasing the un-welded kit and fab up your own base. If you’re purchasing the kit un-welded, don’t worry as assembly is as easy as 1-2-3. (1) Assemble slotted “throat” (aka target holding fixture) like a puzzle using the slotted/tabbed pieces. Ensure all pieces are “square”. (2) Tack the kit in to position with your welder. (3) Start welding!Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally. Target Specifications….. Target height: 19.5″ (with head in up position) Target width: 12″ Target comes unpainted. We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY CRITICAL SHOT – Reactive AR500 Steel Shooting TargetNamed by AR15.com member Jeffco55! The Target Man Critical Shot is a 2-stage reactive target system constructed from ballistic grade AR500. Critical shot doubles as a hostage target and a center-mass shot. Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”. This kit is available in a few different configurations for all budget levels. This version is the the DIY un-welded assembly that comes with an un-welded throat assembly. This kit is available with and without the our patent-pending Multi-Purpose Base (MPB) and you can also purchase this kit un-welded in our DIY Shooting Target section. Save by purchasing the un-welded kit and fab up your own base.  Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ CRITICAL SHOT – Reactive AR500 Steel Shooting TargetNamed by AR15.com member Jeffco55! The Target Man Critical Shot is a 2-stage reactive target system constructed from ballistic grade AR500. Critical shot doubles as a hostage target and a center-mass shot. Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”. This kit is available in a few different configurations for all budget levels. This version is the the pre-welded assembly that comes with a throat. This kit is available with and without the our patent-pending Multi-Purpose Base (MPB) and you can also purchase this kit un-welded in our DIY Shooting Target section. Save by purchasing the un-welded kit and fab up your own base.  Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ Reactive ThroatSo, you lost your reactive throat somewhere at the range? The solution is right here! This replacement throat is pre-welded and ships for FREE. With the AR500 armored deflector, you can be sure this will last damn near forever. It’s literally “bulletproof”. See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ Multi-Purpose Base (MPB)The base comes with 4 legs and hair pins.A TTM original design! We’ve taken everything in to consideration while designing our patent-pending Multi-Purpose Base (MPB). The MPB was engineered with many different key factors. Here’s some benefits of our MPB…     Portable! The MPB was designed with collapsible legs for easy transport. The MPB is designed to fit in to the trunk of the smallest sedan!     Durable! The MPB is constructed from 3/8″ mild steel with an AR500 protector plate. The AR500 protector plate protects the base from errant shots.     Replaceable components! Should you have a stray bullet hit the base, we offer replacement legs!     Light Weight! Compared to other bases, our base weighs much less     Universal! Engineered to easily adapt to ALL of our target systems     Collapsible! With the pull of a few pins, the legs quickly pop off our target base. Assembly is just as easy!     Sturdy! You don’t have to worry about “wobble”. The MPB features 2 angle iron inserts. One insert ensures the angle iron is in the vertical position. The vertical position is for our reactive series targets. The angled position, which ensures the angle iron sits at an approximate 22 degree “lean” toward the shooter, ensures the correct angle when utilizing our dueling tree target systems. The only needed for the shooter to source would be the angle iron. We offer angle iron here under Replacements and Add Ons, but with the cost of shipping, you may want to consider sourcing it locally. Expect to pay $5-$10 for a piece of angle iron. This target system will ONLY work with Standard American (most common size) 1.5″ x .25″ angle iron. See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ “Hostage Moe” – AR500 Reactive Hostage Shooting Target“Hostage Moe” is a 66% IPSC shooting target with a reactive hostage head location. Constructed from ballistic grade AR500, this target is sure to provide years upon years of enjoyment. Whether you’re a competition shooter, recreational shooter, or even LEO, this target is sure to hone your skills and provide hours of enjoyment.This target system is available in a few different variations. You can purchase either the do-it-yourself (DIY) target system, or you can have us do all the welding for you. The welding is super easy and we provide instructions for the reactive throat. The reactive throat (pictured) is what holds your target to the angle iron and it positions your target at the optimal 22 degree angle, which safely deflects bullet fragments down upon impact.Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Also, if you don’t already have one, you may want to consider our patent-pending multi-purpose base (MPB). The MPB works great for all of our reactive target systems, plus you can also use it for our dueling tree target systems. There are two angle insertion slots – one that holds the angle iron in the vertical position for use with our reactive target systems, and one that holds the angle iron at a 22 degree lean for our dueling tree target systems.Specifications                                      12″(W) x 20″(H)     Ballistic grade 3/8″ AR500     Weight – Approximately 22 lbs.     Target comes unpainted.     DIY kit includes un-welded throat, un-welded target, pivot tube, reactive hostage paddle, and instructions for throat     Welded kit includes pre-welded throat, pre-welded pivot tube, and reactive hostage paddle     OPTIONAL angle iron is approximately 4 ft. (+/- a couple of inches). You MUSTused 1.5″x.25″ angle for this to work! We recommend using 46" angle iron for his target.   OPTIONAL: Multi-Purpose Base specifications can be found here.  See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY “Hostage Moe” – AR500 Reactive Hostage Shooting Target“Hostage Moe” is a 66% IPSC shooting target with a reactive hostage head location. Constructed from ballistic grade AR500, this target is sure to provide years upon years of enjoyment. Whether you’re a competition shooter, recreational shooter, or even LEO, this target is sure to hone your skills and provide hours of enjoyment.This target system is available in a few different variations. You can purchase either the do-it-yourself (DIY) target system, or you can have us do all the welding for you. The welding is super easy and we provide instructions for the reactive throat. The reactive throat is what holds your target to the angle iron and it positions your target at the optimal 22 degree angle, which safely deflects bullet fragments down upon impact. This product is a DIY target. You will receive an un-welded target and throat assembly.  Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Also, if you don’t already have one, you may want to consider our patent-pending multi-purpose base (MPB). The MPB works great for all of our reactive target systems, plus you can also use it for our dueling tree target systems. There are two angle insertion slots – one that holds the angle iron in the vertical position for use with our reactive target systems, and one that holds the angle iron at a 22 degree lean for our dueling tree target systems.Specifications                                      12″(W) x 20″(H)     Ballistic grade 3/8″ AR500     Weight – Approximately 22 lbs.     Target comes unpainted.     DIY kit includes un-welded throat, un-welded target, pivot tube, reactive hostage paddle, and instructions for throat     Welded kit includes pre-welded throat, pre-welded pivot tube, and reactive hostage paddle     OPTIONAL angle iron is approximately 4 ft. (+/- a couple of inches). You MUSTused 1.5″x.25″ angle for this to work! We recommend using 46" angle iron for his target.   OPTIONAL: Multi-Purpose Base specifications can be found here.  See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ 3/8 AR500 IPSC & “D” Shaped Gong PackageIPSC / 12″ / 10″ / 8″ Target Bundle KitBuy in bulk and save! By purchasing this item, you will receive (1) 12″, (1) 10″, (1) 8″, and (1) 1/2 Scale IPSC(9″x13.6″) AR500 targets! Constructed from 3/8″ AR500, these targets are sure to last! See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Triple Tap Replacement Paddles           See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Replacement Springs for Texas Star AR500 Reactive Target Whether you've lost some springs or you need to replace old worn springs, we have you covered! This 5 spring replacement pack will get your Texas Star steel shooting target back in order.  PACK OF 5

Sniper's Paradise Replacement Paddles See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ Replacement DIY tree paddlesLose your DIY dueling tree paddle? Here you’ll find individual replacement paddles for your Target Man DIY Dueling Tree kit! Buy 1 or as many as you need. Remember, FREE SHIPPING as with all of our products!3/8″ AR500 paddles. 6″ paddle face See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Replacement Leg Kit for Multipurpose Base  See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ 66% IPSC Target AR500Here you have it…. a 66% (2/3 scale) IPSC cut from 3/8″ AR500 ballistic rated steel! This target is sure to provide hours upon hours of fun to shooters of ALL levels. If you follow the guidelines in our FAQ for shooting parameters, you can realistically expect this target to last you tens of thousands of impacts!Specifications:     3/8″ AR500 + (most of our steel comes in at 515-520)     CNC cut to perfection!     12″(W) x 20″(H)     2 mounting hole locations. As with all of our products, our popular FREE SHIPPING applies! See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ IPSC Target 3/8″ AR500 ***1/2 Scale*** 3/8″ AR500 Shooting Target IPSC Half-Scale 13.625(H) x 9″(W) See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ IPSC Target 1/2″ AR500 ***1/2 Scale*** 1/2″ AR500 Shooting Target IPSC Half-Scale 13.625(H) x 9″(W) See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ IPSC “Mini”3/8″ AR500Measures 8.25″(H) x 5″(W) See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ IPSC “Mini”1/2″ AR500Measures 8.25″(H) x 5″(W) See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Hostage Moe Replacement Paddle See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Heads Up Replacement Paddles See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Head Shot Gut Shot Replacement Paddles           See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Critical Shot Replacement Paddles           See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Challenge Tree Paddle   3/8″ AR500 paddles with 4″ paddle face.      See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ 3/8” AR500 “D” Shaped Gong Package 6″ / 8″ / 10″/12" Gong Target Package “D” Shaped. Buy in bulk and save! By purchasing this item, you will receive (1) 6″, (1) 8″, (1) 10″ and (1) 12" AR500 targets! Constructed from 3/8″ AR500, these targets are sure to last! See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ .22 LR PaddlesBought an AR500 dueling tree kit from us and want to use the cheapest ammo possible? TTM has solved your problem! We now offer a .22LR “retrofit” kit for our DIY dueling trees. Simply remove your AR500 dueling tree paddles and drop these in. Perfect for .22LR all day long!Please remember these are A36 mild steel paddles and NOT AR500! Heavier caliber weapons WILL damage your targets!5.5″ diameter paddles. Choose your configuration below. See A Comparison of Our Full Line Reactive Steel Targets on page 2:

SPARTAN ARMOR SYSTEMS® "SPARTAN" SHOOTERS CUT PLATE CARRIER   Product Overview The Spartan Armor Systems® "Spartan" Plate Carrier is true to its name: sleek, minimalist, and highly capable on the battlefield. Designed to be lightweight, agile, and to enable the wearer to rapidly engage, the Spartan Armor Systems® “Spartan” Shooters Cut Plate Carrier is designed for use with our shooters cut steel core armor: Spartan™ Omega™ AR500 and AR550. Adjustable from Medium to XL, this carrier fits 10”x12” shooters cut plates and will accommodate 6”x6” side plates in the cummerbund. The Spartan Shooters Cut Plate Carrier is built to last and gives you the key essential features you need without sacrificing quality. The Spartan Shooters Cut Carrier is a great entry-level carrier that offers a variety of features at an affordable price point. When the situation dictates less is more, this carrier delivers the goods where it counts.    Spartan Armor Systems® Spartan Shooters Cut Plate Carrier Specs: Lightweight Plate Carrier That Accepts Side Plates Designed For Spartan Armor Systems® 10” X 12” Shooters Cut Steel Core Plates Adjustable From Medium To XL PALS Webbing On Front And Back For Versatility And Customization Velcro On Front And Back For Id Patch Placement Cummerbund Is Designed To Hold 6” X 6” Side Plates Comfortably Shoulder Pads Included 860 Denier Poly Construction Reinforced Drag Handle   SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.    Chest Plate Weight (per plate):  10"x12" Plate: Base Coat 8lbs 10oz. Side Plate Weight (per plate):  6×6 approximately 2lbs 1oz (base coat)  Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.  

PRODUCT DETAILS Spartan Armor Systems Active Shooter Kit   Spartan™ Omega™ AR500 Body Armor with Hydra Plate Carrier. This active shooter kit set up is designed to allow a quick response time and comfortable performance fit with superior Level III Rifle Rated Protection. Carrier includes emergency drag handle, quick cinch adjustments for the front and hook and loop adjustments on the shoulders. The Spartan Armor Active Shooter Kit is perfect for rapid response situations.   Front map pocket Emergency drag handle Removable padded mesh shoulder pads with hook and loop guides Adjustable shoulder straps Hook and loop webbing Heavyweight webbing for modular attachments Padded mesh interior lining Quick adjust cinches Quick release buckles Easy access plate pockets Waist Size: 30″ – 46″ adjustable sizing Accepts traditional Medium or Large SAPI plates up to 10.25″ x 13.25″. Best fit for our shooters cut and swimmers cut Spartan™ Omega™ AR500 Body Armor and AR550 Body Armor. This package includes our Spartan™ Omega™ AR500 Body Armor 10x12 lab certified Armor. 1/4" thickness and provides the operator with Level III protection IAW NIJ0101.06 standards.    Our Spartan™ Omega™ AR500 Body Armor has also been tested to go beyond the Level III testing protocol (6 shots .308/M80 Ball, 2780 fps).  Special Threat Ratings: SS109/M855 3148 fps 6 shots .223 REM 60gr. Partition 2762 fps 6 shots M43 MSC 2407 fps 6 shots M67 Led Core 2375 fps 6 shoots     With all of our AR500 Omega™ Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates and secondary ballistics available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about the Spartan™ Omega™ AR500 Body Armor we use to construct out body armor! Coating Options:  Choose the Full Coat option to have the plate lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities. To learn more check out our blog on the coating options: https://www.spartanarmorsystems.com/blog/encapsaloc-fragmentation-mitigation-antispall-body-armor-coating/   Chest Plate Weight (per plate): 10x12 Spartan™ Omega™ AR500 Body Armor Shooters Cut: Base Coat 8lbs 7oz. Full Coat 9lbs 3oz.      Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.         *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

The Hydra Plate Carrier is a highly adaptable carrier ideal for quick deployment and emergency situations such as active shooter scenarios. Easily adjustable buckles ensure a snug and comfortable fit on the sides. Ample length shoulder straps allow the Hydra plate carrier to be easily adjusted to fit a wide variety of body types. Breathable mesh is used at chest, back and shoulder contact points to allow for maximum breathability. The Hydra plate carrier is a great choice for anyone looking for a lightweight and versatile body armor configuration. Front map pocket Emergency drag handle Removable padded mesh shoulder pads with hook and loop guides Adjustable shoulder straps Hook and loop webbing Heavyweight webbing for modular attachments Padded mesh interior lining Quick adjust cinches Quick release buckles Easy access plate pockets Waist Size: 30″ – 46″ adjustable sizing Accepts Medium or Large SAPI plates up to 10.25″ x 13.25″   Constructed from lab certified AR500 Omega™ Armor, (1/4” thickness) these plates provide the operator with Level III protection IAW NIJ0101.06 standards.   With all of our AR500 Omega™ Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about the AR500 Omega™ Armor we use to construct out body armor!     Full Coat or Base Coat Options:    We are excited to announce our potentially “life saving” breakthrough!  The strike face for our plates is mark embedded with our Spartan logo! Both sides of these plates are coated, however, the back side only has a “courtesy coat” to protect against wear and rust. The front of the plate is lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. Due to popular demand, we have added a “base coat” only option for our AR500 Omega™ armor products. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.   Chest Plate Weight (per plate): 10x12 AR500 Omega™ Armor Swimmers Cut: Base Coat 7lbs 7oz. Full Coat 8lbs 1oz.    *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega™ Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch  Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.  Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing. Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.  Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch  Ares Level IV Ceramic Body Armor - Set of Two Plates The Ares level IV ceramic body armor plate is our toughest and lightest level IV plate yet. With a boron carbide strike face and UHMWPE backer, the Ares is a military grade plate that has been laboratory tested and proven to defeat .30-06 M2AP armor piercing rounds. Boron carbide is one of the hardest materials known to man. However, it’s lighter than other softer ceramics such as aluminum oxide, which is used in most civilian grade body armor. The Ares is a superior level IV plate that is proudly manufactured in our Tucson, AZ facility. Lightweight Level IV Protection It’s no secret that speed, agility and stamina are critical during hostile engagements. While many level IV ceramic body armor plates weigh around 7 or 8 lbs per plate, the Ares weighs in at just 6.1 lbs per plate.  Not only does the Ares plate provide the operator with a clear weight advantage, but the boron carbide strike face easily destroys .30-06 M2 AP rounds upon impact. The lightweight UHMWPE backer catches the remaining bullet fragments preventing any penetration or secondary spall injury to the operator.  The Ares level IV ceramic body armor plate is the perfect choice for Law Enforcement, Security Contractors, Military, First Responders or even concerned civilians looking for advanced threat protection and safety. Full Edge-To-Edge ESAPI Protection Get what you're paying for with full edge-to-edge protection! The Ares provides maximum protection for vital organs in a full 9.5" x 12.5" medium ESAPI shooters cut profile. This allows for better protection to the operator in the event of near-edge impacts. The highly compatible ESAPI sizing gives the operator the freedom to choose from a wide range of plate carriers. The Ares features a traditional multicurve design for added comfort during extended duty use. Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ

Spartan Armor Systems® Spartan DL Plate Carrier Specs:  Low-profile Minimalist Carrier Bottom-loading Design Supports The Plate In The Pocket 4″ Fully Adjustable Elastic Cummerbund 2” Low Profile Shoulder Adjustment Velcro On Front And Back For Name, Id, Blood Type, Etc. Material: 500 Denier Nylon/Pu Nylon Webbing Size: 11.4" X 12.5" Integrated Mag Pouches Hold M4 Mags As Well As A Pistol Mags (2 On Each Side) Note: Due to the extremely low profile design of the Spartan DL Plate Carrier, they WILL NOT ACCEPT SIDE PLATES. Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A. SPARTAN ARMOR SYSTEMS® SPARTAN DL PLATE CARRIER Product Overview When the environment you are operating in demands discretion and stealth, the Spartan Armor Systems® DL Plate Carrier offers minimalist features for extreme concealment. Virtually indiscernible when worn beneath loose clothing, these ultra-minimalist carriers are designed to fit with Spartan Armor Systems® Flex Fused Core Soft Armor Panels. Covert, comfortable, and concealed - the Spartan DL Plate Carrier is made for environments that demand maintaining a low profile. The Spartan DL Concealment carrier can also be worn overt (on the outside of clothing) and can accept hard armor such as Spartan™ Omega™ AR500, AR550, or Armis IIIA Hard Armor. Rugged, Reliable, Versatile The Low-profile design of the Spartan Armor Systems® DL Plate Carrier features bottom-loading plate insertion capability and a 4” fully adjustable cummerbund. This carrier comes in two sizes and can accommodate 10"x12" or 11"x14" body armor plates. The 500 Denier/Nylon blended material makes for an extremely durable, comfortable carrier that will flex and bend, contouring to your torso as you move throughout your day and activities. The inclusion of built-in soft Mag Pouches provides a tactical advantage. The Spartan DL Plate Carrier can accept AR Mags as well as a Pistol Mag (2 on each side) for versatility and quick access to your reloads.  Spartan Armor Systems® Spartan DL Plate Carrier Specs:  Low-profile Minimalist Carrier Bottom-loading Design Supports The Plate In The Pocket 4″ Fully Adjustable Elastic Cummerbund 2” Low Profile Shoulder Adjustment Velcro On Front And Back For Name, Id, Blood Type, Etc. Material: 500 Denier Nylon/Pu Nylon Webbing Size: 11.4" X 12.5" Integrated Mag Pouches Hold M4 Mags As Well As A Pistol Mags (2 On Each Side) Note: Due to the extremely low profile design of the Spartan DL Plate Carrier, they WILL NOT ACCEPT SIDE PLATES. SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards. Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.  Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A.

SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR   Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards.   Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.    Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A.

Specifications Stand -Alone Armor System 10” X 12” 3.5 lbs/plate (10”x12”) Ultra High Molecular Weight Polyethylene (UHMWPE) Hybrid Fibers Neutrally buoyant Multi-Shot Rated 1.2” profile Our Proprietary “Encapsaloc” Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Raised and Embedded 3D Spartan Armor Systems® Logo Made in U.S.A. SPARTAN ARMOR SYSTEMS® LEVEL III ELAPHROS SET OF TWO Spartan Armor Systems® Introduces our advanced “Elaphros” (Ultra Light Weight) Level III, Multi-curve, UHMWPE Body Armor. At only 3.5 lbs per plate, this Body Armor is for those that require rifle-rated protection over extended distances without being weighed down. Elaphros lightweight body armor offers NIJ Level III (certified) threat protection at approximately half the weight of most comparable body armor plates. Elaphros body armor is neutrally buoyant and so light that it floats in water! Light, Quick, Agile “Elaphros'' in greek translates to light, quick, agile, and easy to bear. Designed for the operator that requires minimal weight and maximum maneuverability, Eleaphros body armor allows the operator a distinct advantage in a wide range of tactical engagements. Elaphros body armor is NIJ certified to meet or exceed level III requirements under NIJ 0101.06.   Master Crafted, Laboratory Tested Spartan Armor Systems® Elaphros Body Armor Plates are lab tested and certified to meet or exceed ballistic resistance under NIJ-0101.06 Level III specifications. Elaphros body armor plates offer the comfort, reliability, quality, and affordability you’ve come to expect from Spartan Armor Systems®. Constructed with Multiple ply’s of Advanced UHMWPE Hybrid Fibers, Elaphros weighs in at 3.5lbs/per plate while maintaining a sleek 1.2” low profile design that allows the operator maximum mobility and comfort with Level III protection. Our Elaphros Shooters Cut, 10”X12”, multi-curved, UHMWPE body armor was designed in-house by our dedicated team of engineers that have decades of industry experience. These UHMWPE plates were developed using only the highest quality materials, production, and quality assurance standards, providing maximum confidence and supreme coverage for our customers. Next Level Armor Elaphros (Ultra Lightweight) Level III Body Armor Plates are coated/encapsulated with Spartan Armor Systems® proprietary “Encapsaloc” Polyurea Coating. Protecting the plate from water, contaminants, and daily wear and tear. Taking great pride in every piece of armor Spartan Armor Systems® produces, the raised 3D Spartan Armor Systems® logos is a symbol of our exceptionally high-quality standards and pride. If that weren’t enough, we provide a 5-year warranty and a 5-year shelf life with our Elaphros UHMWPE Body Armor! Specifications Stand -Alone Armor System 10” X 12” 3.5 lbs/plate (10”x12”) Ultra High Molecular Weight Polyethylene (UHMWPE) Hybrid Fibers Neutrally buoyant Multi-Shot Rated 1.2” profile Our Proprietary “Encapsaloc” Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Raised and Embedded 3D Spartan Armor Systems® Logo Made in U.S.A.

Backpack Armor -  Spartan Armor Systems™ Flex Fused Core™ IIIA Soft Armor 11" x 14" Panel Due to popular demand, we have developed our own version of pistol rated level IIIA soft armor which is now available in single 11" x 14" panels to function as inserts for backpacks or similar applications. As it's name implies, the Spartan Armor Systems™ Flex Fused Core™ Soft Armor flexible and easily forms to most properly sized backpack chambers. Keeping with Spartan Armor tradition, it offers GREAT protection at a GREAT price. Composed of only the best American made materials and proudly assembled in our new state of the art facility in Tucson, Arizona.   Rated to stop .44 MAG SJHP, as well as Special Threat Rated to stop .357 SIG FMJ  This soft armor can be used stand alone, giving level IIIA protection or ICW (in conjunction with) as backer on any hard armor systems. Multi-hit rated to stop 6 rounds All parts of this product are proudly American made. Thinness: .35" profile Weight: 1lb 9.4 oz Includes One  (1) 11"x14" Panel

Spartan Armor Systems has teamed up with Contact Armor to offer our customers an extreme concealable package that you can wear to the gym, the grocery store, wherever you feel it is deemed necessary.  *THIS PACKAGE IS SOLD AS IS, NO RETURNS OR EXCHANGES* Introducing Spartan Armor Systems™ Flex Fused Core™ IIIA Soft Body Armor Due to popular demand, we have developed our own version of pistol rated level IIIA soft body armor. The Spartan Armor Systems™ Flex Fused Core™ Soft Armor is comfortable and easy to wear. Keeping with Spartan Armor tradition, it offers GREAT protection at a GREAT price. Composed of only the best American made materials and proudly assembled in our new state of the art facility in Tucson, Arizona. Tested and passed in accordance with NIJ-STD-0101.06 / MIL-STD-662F. Rated to stop .44 MAG SJHP, as well as Special Threat Rated to stop.357 SIG FMJ  This soft armor can be used stand alone, giving level IIIA protection or ICW (in conjunction with) as backer on any of hard armor systems. All parts of this product are proudly American made. .35" profile 10"x12" Panel: Weight 1.14 lb This package comes with: Level IIIA Flexed Fused Core Soft Armor:10x12 Front and Back Panel5x7 Side Panels Contact Armor Hybrid Cool Carrier:Hybrid Cool Carrier (your size of choice M, L, or XL) If you have any questions about sizing and or the IIIA Soft Armor please feel free to reach out to us at: contact@spartanarmorsystems.com (520)396-3335  

SPARTAN ARMOR SYSTEMS® CONCEALABLE IIIA CERTIFIED WRAPAROUND VEST   Product Overview Spartan Armor Systems® has constructed a Level IIIA Wraparound Concealable Vest that is designed to be an exceptionally discrete option while protecting the user from most handgun rounds. This lightweight, breathable, water repellant carrier has a convenient four-point adjustable strapping system that was developed with a high degree of comfort and ease of use in mind.    NIJ Certified, Covert and Effective Spartan Armor Systems® Concealable IIIA Wraparound Vest is certified under NIJ 0101.06 specifications and testing. Rated to stop .44 MAG SJHP, as well as Special Threat Rated to stop a .357 SIG FMJ, this flexible, comfortable, discrete soft armor wraparound vest can be used stand-alone, giving level IIIA protection. This wraparound concealment vest is a popular choice for Law Enforcement Officers and Security Professionals who need a comfortable armor solution for extended duty use but with the ability to wear this wraparound body armor vest as a backer ICW (in conjunction with) any of Spartan Armor’s hard armor systems. All parts of this product are proudly American-made. Concealable Level IIIA Certified Wraparound Vest Specifications: Side Opening Design Moisture-wicking, Anti-Microbial Inner Liner (This Draws Moisture Away From The Body For A Faster Cool-Down Time) Shoulder Straps Are Fully Adjustable For Fitment While Being Able To Keep Your Carrier On  5” X 8” Trauma Plate (Meant To Reduce Back Face Deformation) Dual 6” X 8” And 7” X 9” Front Plate Inserts Low-profile Loop For Less Bulkiness And Reduced Friction Against Clothing Sizing Options: Small, Medium, Large, X-large, And XX-large Made In U.S.A.   Note: If you are a department looking to get more information on this product please feel free to give our Bulk Sales Department a call or send an email for more specifications and product guides.   Note: Custom Sizing for Spartan Armor Systems® Concealable Level IIIA Certified Wraparound Vest is available.

SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR   Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards.   Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.    Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds .35" Profile 6"x6", 6"x8", 6"x11", and 5"x15" Panel sizes  Made In U.S.A.

Specifications: Includes 2 Plates NIJ Certified Level III 9.5"x12.5" 4.8 lbs 1.1" thick Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Ballistic Threats Tested:  7.62x39mm M67 (FMJ Ball) 7.62x39mm M43 (MSC) 7.62x51mm (M-80 Ball) 5.56x45mm (M193 Ball) 5.56x45mm (M855/SS109) Spartan Armor Systems Level III+ Composite/Ceramic Multi Curve 10"x12" Set of Two At only 4.8 lbs this is our lightest level III+ body armor plate we've ever offered. This stand-alone composite/ceramic body armor is multi-hit rated and special threat validated against high velocity rounds such as SS109/M855. The combination of multi curve design and light weight makes this armor comfortable and easy to wear for for extended periods of time. Each plate measures 9.5"x12.5" inches and is only 1.1" inches thick  Specifications: Includes 2 Plates NIJ Certified Level III 9.5"x12.5" 4.8 lbs 1.1" thick Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Ballistic Threats Tested:  7.62x39mm M67 (FMJ Ball) 7.62x39mm M43 (MSC) 7.62x51mm (M-80 Ball) 5.56x45mm (M193 Ball) 5.56x45mm (M855/SS109) Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited. The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.  

Spartan Armor Systems Armis Level IIIA Multi Curve Plates Spartan Armor Systems has had a lot of customers ask for combination threat level IIIA plates. What is a combination threat level plate? A combination threat level plate is a plate that is stab-resistant as well as bullet-resistant. The plates have a multi curvature to conform to the body for improved comfort. Our Spartan Armis Level IIIA Plates are coated/encapsulated with Spartan Armor Systems proprietary “Encapsaloc” Polyurea Coating. Along with a raised, embedded, and 3D Spartan Armor Systems Logo the “Armis” Plates set the standard for those looking for level IIIA Body Armor at an affordable price.    Two (2) Body Armor Plates Are Included With Each Order. These Plates come with a 5-year warranty and a 5-year shelf life! Specifications: Stand-Alone Armor System 10” X 12” 1.5 lbs/plate Multi-Shot Rated 3/8” profile Our Proprietary “Encapsaloc” Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Raised and Embedded 3D Spartan Armor Systems Logo     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited. The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.  

Spartan Armor Systems ® Hercules Level IV Ceramic Advanced Compound Curve Body Armor -  Set of Two Plates Product Overview The Hercules level IV body armor plate is manufactured in-house at the Spartan Armor Systems® facility in Tucson, AZ utilizing ballistic ceramic and UHMWPE materials. As with all body armor manufactured by Spartan Armor Systems®, the Hercules level IV ceramic body armor plate has been independently tested and verified by an NIJ Certified laboratory. Each Hercules level IV body armor plate is rated to stop armor piercing rifle rounds up to .30-06 M2 AP. Weighing in at just 6.9 lbs per plate, the Hercules is noticeably lighter than most level IV ceramic body armor plates available. With full edge-to-edge 10”x12” coverage and Advanced Compound Curve design, the Hercules is ideal for operators in need of maximum protection and comfort.  Full Edge-To-Edge Protection Get what you pay for! It might not be obvious, but some 10”x12” level IV ceramic body armor plates on the market only provide protection in a 8”x10” area to keep manufacturing costs low. However, the Hercules ceramic body armor plate provides full 10”x12” edge-to-edge protection for the operator. When your life is on the line, don’t take chances with other ceramic plates that measure 10”x12”, but only provide an 8”x10” area of protection. Buy ceramic level IV body armor plates that give you the protection you’re paying for.   Advanced Compound Curve - True Multi-Curve Design The Hercules level IV body armor plate features our Advanced Compound Curve (ACC). While many body armor plates claim to be “multi-curve”, the ACC profile is a true multi-curve design providing the operator with the most comfortable fit of any ceramic level IV body armor plate. This advanced ergonomic design is especially important during extended duty engagements, typical of Law Enforcement, Security, and Military operations. Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Ceramic & UHMWPE Plate Size: 10”x12” Protection Area: 10”x12” Weight: 6.9 lbs Thickness: 1.1” Plate Quantity: Two (2) Plates Included Curve Profile: Advanced Compound Curve Cut: SAPI/ESAPI (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Condura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ.   NOTE: Ceramic armor cannot be resold, therefore ALL sales for this product are final. No returns or exchanges accepted.

SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SHOOTERS CUT SET OF TWO Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Plate Weight (per plate): 8”x10” AR550 Shooters Cut: Base Coat 5lbs 5oz. Full Coat 6lbs 1oz. 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs.   Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.        

SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO   Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.    Chest Plate Weight (per plate):  8”x10” Plate: Base Coat 5lbs 13oz. Full Coat 6lbs 7oz 10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz. 11"x14" Plate: Base Coat 10lbs 1oz. Full Coat 11lbs 6oz. Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.   Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

SPARTAN™ OMEGA™ AR500 BODY ARMOR SWIMMERS CUT SET OF TWO   Product Overview Sleek, lightweight, and ready to move, the Swimmers Cut Spartan™ Omega™ AR500 Body Armor affords operators with increased mobility, a decrease in overall weight. The “Swimmers Cut” gets its name from the improved range of motion in the shoulders due to the angle of cut in the top corners of the plate. This allows for a lighter and less obstructive body armor plate while still providing coverage for vital organs. Swimmers Cut Spartan™ Omega™ AR500 Body Armor is constructed from lab certified AR500 ballistic grade steel, (¼” thickness) and these body armor plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. When the environment dictates speed and mobility as primary and critical factors, the Spartan omega AR500 Body Armor Swimmers Cut Plates are an excellent choice.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.   Exceptional Comfort & Engineering You have the choice of getting our AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved AR550 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.  Chest Plate Weight (per plate):  8x10 Plate: Base Coat 5lbs. Full Coat 5lbs 11oz. 10x12 Plate: Base Coat 7lbs 7oz. Full Coat 8lbs 1oz. 11x14 Plate: Base Coat 9lbs 2oz. Full Coat 10lbs 15oz. Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    Spartan™ Omega™ AR500 Body Armor Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.   *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.  

Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor is specifically designed to feature a streamlined cut, which reduces overall weight, enhances mobility, comfort, and ergonomics in the field while affording this higher degree of threat protection. SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SWIMMERS CUT SET OF TWO Product Overview Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor is specifically designed to feature a streamlined cut, which reduces overall weight, enhances mobility, comfort, and ergonomics in the field while affording this higher degree of threat protection. As with our other AR550 body armor products, Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.  IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.    Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Chest Plate Weight (per plate): 8x10 AR550 Swimmers Cut: Base Coat 4lbs 6oz. Full Coat 4lbs 14oz. 10x12 AR550 Swimmers Cut: Base Coat 6lbs 10oz. Full Coat 7lbs 8oz. 11x14 AR550 Swimmers Cut: Base Coat 8lbs 5oz. Full Coat 8lbs 13oz.   Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    AR550 Body Armor - Swimmers Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.