Spartan Armor Systems: Unmatched Ballistics Protection

The Ghost Concealment Shirt provides discreet level IIIA protection against handgun threats up to .44 MAG SJHP and .357 SIG. This concealable body armor package provides front, back and side protection in a slim profile that is virtually undetectable under a loose shirt or jacket.This package comes with:- Ghost Concealment Shirt (your size of choice S, M, L, XL, XXL)- 2 Qty: 10"x12" Level IIIA Flexed Fused Core™ Soft Armor Panels- 2 Qty: 5"x7" Level IIIA Flexed Fused Core™ Soft ArmorSide PanelsShirt sizing is very similar to men's collared shirts. If you're looking for a tight fit then consider going down 1 size.*THIS PACKAGE IS SOLD AS IS, NO RETURNS OR EXCHANGES* SPARTAN ARMOR SYSTEMS® Ghost Concealment Shirt for Flex Fused Core™ IIIA Soft Armor  Product Overview   The Ghost concealment shirt extends your Everyday Carry (EDC) capabilities by providing 4 zones of level IIIA ballistic protection. Our Flex Fused Core IIIA™ soft armor panels fit discreetly into front, back and side pockets sewn directly into the Ghost Concealment Shirt. This allows the Ghost Concealment Shirt to be worn covertly under loose clothing with little to no “printing”, or visible outlines on top layers of clothing.   Designed for Everyday Protection   Whether you’re out on the street, at work, school, etc. there are increasingly fewer opportunities to protect yourself. The Ghost Concealment Shirt and our Flex Fused Core™ IIIA soft armor provides protection against handgun threats up to .44 Magnum SJHP and .357 SIG FMJ. For maximum ballistic coverage, we include two 10”x12” front and back panels as well as two 5”x7” side panels with each order. Made of a breathable lightweight fabric similar to an athletic jersey, the Ghost Concealment Shirt is designed to be comfortable even when worn for long periods of time. When it’s time to wash the shirt, it’s as simple as removing the IIIA soft armor panels and placing the Ghost Concealment Shirt in your washing machine and it is machine dryable as well.   Low profile design minimizes printing when worn under loose clothing  Made of breathable materials designed to stay cool  Available in S, M, L, XL and XXL  Holds 10”x12” front/back armor panels and 5”x7” side panels  Machine washable (use delicate/low cycles)  Flex Fused Core™ IIIA Soft Armor provides .44 MAG SJHP and .357 SIG FMJ protection  Flex Fused Core™ IIIA Soft Armor is made in USA, manufactured in Tucson, AZ  Available in black, black & grey and black with black/grey camo   SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR  Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards. Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.  Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A.

Spartan Armor Systems® Leonidas Plate Carrier System Specs: 500 Denier Construction Front Top Zippered Admin Pouch Front Lower Velcro Kangaroo Pouch Pals Web Attachment Points Covering The Front, Back, And Shoulders Of The Vest Mil-spec Laser Cut Pals Webbing On The Shoulders Cummerbund Is Designed To Hold A 5"X15" IIIa Soft Armor Inside Each Side Includes 2 Molle Side Plate Pouches That Accept 6”X6” Or 6”X8” Side Plates Cummerbund Has A Proprietary Retained Shock Cord System To Allow Stretch While Being Held In Place To Stop Sagging Cummerbund Is Removable And The Carrier Is Equipped With Removable Quick-release Buckles Genuine US Mil-Spec Webbing Velcro On The Back Drag Handle Keeps It In Place Heavy Duty Bar Tacking At Key Stress Points Communication Or Hydration Hose Guides Padded Front And Back Interior Of Carrier With Airflow Channels Sewn In Front And Back Areas Of Velcro For Identifiers Bottom Loading Plate Pockets Accepts 10"X12", SAPI, And Similar Armor All Pieces Made In The USA, Assembled In Mexico Note: This plate carrier by itself will only hold 5"x15" Soft Armor Panels, this package will come with a MOLLE system to attach on your 6"x6" or 6"x8" side plates. SPARTAN ARMOR SYSTEMS® LEONIDAS PLATE CARRIER  Product Overview The Leonidas plate carrier is an advanced, feature-rich plate carrier system fit for a Spartan King, hence the name… “Leonidas". This highly versatile plate carrier hosts a wide variety of battle-proven features including a removable cummerbund capable of holding 5”x15” IIIA soft armor panels on each side. Additional Molle side plate pouches are included to attach 6”x6” or 6”x8” side plates to the inside PALS webbing of the cummerbund. When you are looking for the toughest plate carrier available to take into battle, the Leonidas Plate Carrier holds the throne.   A War Chest of Features The Leonidas Plate Carrier System hosts a full array of tactical accommodations and features designed to keep you in the fight. The 500 Denier construction with front top-zippered admin pouch and front lower velcro kangaroo pouch allows you to store accessories, administrative gear, and more. True US Mil-Spec Webbing and PALS webbing attachment points are provided in ample placement throughout the front, back and shoulder areas of the vest allowing for ultimate customization and accessorization. The removable cummerbund is equipped with quick-release buckles and allows you to expand your armor coverage with 5"x15" IIIA soft armor inside each side. If that weren’t enough, the Leonidas Plate Carrier also implements heavy-duty bar tacking at key stress points to ensure longevity in the field and communication or hydration hose guides, all critical features for sustaining and enduring through long operations.    Spartan Armor Systems® Leonidas Plate Carrier System Specs: 500 Denier Construction Front Top Zippered Admin Pouch Front Lower Velcro Kangaroo Pouch Pals Web Attachment Points Covering The Front, Back, And Shoulders Of The Vest Mil-spec Laser Cut Pals Webbing On The Shoulders Cummerbund Is Designed To Hold A 5"X15" IIIa Soft Armor Inside Each Side Includes 2 Molle Side Plate Pouches That Accept 6”X6” Or 6”X8” Side Plates Cummerbund Has A Proprietary Retained Shock Cord System To Allow Stretch While Being Held In Place To Stop Sagging Cummerbund Is Removable And The Carrier Is Equipped With Removable Quick-release Buckles Genuine US Mil-Spec Webbing Velcro On The Back Drag Handle Keeps It In Place Heavy Duty Bar Tacking At Key Stress Points Communication Or Hydration Hose Guides Padded Front And Back Interior Of Carrier With Airflow Channels Sewn In Front And Back Areas Of Velcro For Identifiers Bottom Loading Plate Pockets Accepts 10"X12", SAPI, And Similar Armor All Pieces Made In The USA, Assembled In Mexico Note: This plate carrier by itself will only hold 5"x15" Soft Armor Panels, this package will come with a MOLLE system to attach on your 6"x6" or 6"x8" side plates.

SPARTAN ARMOR SYSTEMS® "SPARTAN" SWIMMERS CUT PLATE CARRIER   Product Overview The Spartan Armor Systems® "Spartan" Swimmers Cut Plate Carrier is designed for use with our Swimmers Cut steel core armor: Spartan™ Omega™ AR500 and AR550. This minimalist “Spartan” carrier is designed for those seeking speed, agility, and ultimate maneuverability in their carrier. The Swimmers Cut Plate Carrier is adjustable from a Medium size to XL and can accommodate 6”x6” side plates in the cummerbund, should you desire to run it with enhanced side protection. Intended for highly active environments that require the wearer to remain nimble, this carrier is constructed of extremely durable 860 Denier poly construction, fits 10”x12” swimmers cut plates which provide coverage where you need it most, but reduces weight and allows for enhanced mobility by eliminating a small amount of plating from the shoulder regions. Don’t let the paired down design fool you though, this versatile and effective carrier affords a good degree of customization with PALS webbing on the front and back sides for the attachment of molle accessories and pouches, and velcro on front and back for patch placement and identifiers. If you’re looking for a versatile plate carrier that allows for a greater range of motion and mobility that won’t break the bank, the Spartan Swimmers Cut Plate Carrier is for you.   Spartan Armor Systems® “Spartan” Swimmers Cut Plate Carrier Specs: Lightweight Plate Carrier That Accepts Side Plates Designed For Spartan Armor Systems® 10" X 12" Swimmers Cut Steel Core Plates Adjustable From Medium To XL PALS Webbing On Front And Back For Versatility Velcro On Front And Back For Patch Placement Cummerbund Is Designed To Hold 6" X 6" Side Plates Comfortably Shoulder Pads Included 860 Denier Poly Construction Reinforced Drag Handle NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems®. We can not guarantee a fit with plates made by other manufacturers.   SPARTAN™ OMEGA™ AR500 BODY ARMOR SWIMMERS CUT SET OF TWO   Product Overview Sleek, lightweight, and ready to move, the Swimmers Cut Spartan™ Omega™ AR500 Body Armor affords operators with increased mobility, a decrease in overall weight. The “Swimmers Cut” gets its name from the improved range of motion in the shoulders due to the angle of cut in the top corners of the plate. This allows for a lighter and less obstructive body armor plate while still providing coverage for vital organs. Swimmers Cut Spartan™ Omega™ AR500 Body Armor is constructed from lab certified AR500 ballistic grade steel, (¼” thickness) and these body armor plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. When the environment dictates speed and mobility as primary and critical factors, the Spartan omega AR500 Body Armor Swimmers Cut Plates are an excellent choice.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.   Exceptional Comfort & Engineering You have the choice of getting our AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved AR550 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.  Chest Plate Weight (per plate):  10x12 Plate: Base Coat 7lbs 7oz. Full Coat 8lbs 1oz. Side Plate Weight (per plate):  6×6 approximately 2lbs 1oz (base coat) or 2lbs 15oz (full coat) 6×8 approximately 3lbs 10oz (base coat) or 3lbs 14oz (full coat)    Spartan™ Omega™ AR500 Body Armor Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.   *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.  

Spartan Armor has stepped up the game for our customers! We have constructed a wraparound vest that is 1000 denier material, extremely durable and comfortable while still protecting whats yours. Spartan Armor Systems International Tactical Level IIIA Certified Wraparound Outer Carrier is designed for streamlined use in the field. This carrier can be a standard Level IIIA Protection or you can add in a rifle rated ballistic insert up to a 10x12 plate. This carrier is fully adjustable at the shoulder straps as well as the side closures.    Specifications: Constructed of durable 1000 denier  Modular system with the capability to accommodate additional accessories Front and Back Pockets (will hold our 10x12 Steel Core Plates as well as the Composite/Ceramic Plates) Shoulder straps are fully adjustable for fitment while being able to keep your carrier on  Side closure cummerbund Heavy-duty drag handle Front and Back ID attachment platforms measuring 10.5" x 3" Sizing Options: Small Medium Large X-Large XX-Large   Ballistic Specifications: This product is NIJ Certified under the Level IIIA Specifications Rated to stop .44 MAG SJHP, as well as Special Threat Rated to stop a .357 SIG FMJ. This soft armor can be used stand-alone, giving level IIIA protection or ICW (in conjunction with) as a backer on any of hard armor systems. All parts of this product are proudly American made.

Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ Ares Level IV Ceramic Body Armor - Set of Two Plates The Ares level IV ceramic body armor plate is our toughest and lightest level IV plate yet. With a boron carbide strike face and UHMWPE backer, the Ares is a military grade plate that has been laboratory tested and proven to defeat .30-06 M2AP armor piercing rounds. Boron carbide is one of the hardest materials known to man. However, it’s lighter than other softer ceramics such as aluminum oxide, which is used in most civilian grade body armor. The Ares is a superior level IV plate that is proudly manufactured in our Tucson, AZ facility. Lightweight Level IV Protection It’s no secret that speed, agility and stamina are critical during hostile engagements. While many level IV ceramic body armor plates weigh around 7 or 8 lbs per plate, the Ares weighs in at just 6.1 lbs per plate.  Not only does the Ares plate provide the operator with a clear weight advantage, but the boron carbide strike face easily destroys .30-06 M2 AP rounds upon impact. The lightweight UHMWPE backer catches the remaining bullet fragments preventing any penetration or secondary spall injury to the operator.  The Ares level IV ceramic body armor plate is the perfect choice for Law Enforcement, Security Contractors, Military, First Responders or even concerned civilians looking for advanced threat protection and safety. Full Edge-To-Edge ESAPI Protection Get what you're paying for with full edge-to-edge protection! The Ares provides maximum protection for vital organs in a full 9.5" x 12.5" medium ESAPI shooters cut profile. This allows for better protection to the operator in the event of near-edge impacts. The highly compatible ESAPI sizing gives the operator the freedom to choose from a wide range of plate carriers. The Ares features a traditional multicurve design for added comfort during extended duty use. Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ

Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA   Product Overview  True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.    Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing.   Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.    Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch      Spartan Armor Systems ® Hercules Level IV Ceramic Advanced Compound Curve Body Armor -  Set of Two Plates   Product Overview The Hercules level IV body armor plate is manufactured in-house at the Spartan Armor Systems® facility in Tucson, AZ utilizing ballistic ceramic and UHMWPE materials. As with all body armor manufactured by Spartan Armor Systems®, the Hercules level IV ceramic body armor plate has been independently tested and verified by an NIJ Certified laboratory. Each Hercules level IV body armor plate is rated to stop armor piercing rifle rounds up to .30-06 M2 AP. Weighing in at just 6.9 lbs per plate, the Hercules is noticeably lighter than most level IV ceramic body armor plates available. With full edge-to-edge 10”x12” coverage and Advanced Compound Curve design, the Hercules is ideal for operators in need of maximum protection and comfort.    Full Edge-To-Edge Protection Get what you pay for! It might not be obvious, but some 10”x12” level IV ceramic body armor plates on the market only provide protection in a 8”x10” area to keep manufacturing costs low. However, the Hercules ceramic body armor plate provides full 10”x12” edge-to-edge protection for the operator. When your life is on the line, don’t take chances with other ceramic plates that measure 10”x12”, but only provide an 8”x10” area of protection. Buy ceramic level IV body armor plates that give you the protection you’re paying for.     Advanced Compound Curve - True Multi-Curve Design The Hercules level IV body armor plate features our Advanced Compound Curve (ACC). While many body armor plates claim to be “multi-curve”, the ACC profile is a true multi-curve design providing the operator with the most comfortable fit of any ceramic level IV body armor plate. This advanced ergonomic design is especially important during extended duty engagements, typical of Law Enforcement, Security, and Military operations.   Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Ceramic & UHMWPE Plate Size: 10”x12” Protection Area: 10”x12” Weight: 6.9 lbs Thickness: 1.1” Plate Quantity: Two (2) Plates Included Curve Profile: Advanced Compound Curve Cut: SAPI/ESAPI (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Condura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ.   NOTE: Ceramic armor cannot be resold, therefore ALL sales for this product are final. No returns or exchanges accepted.

Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA   Product Overview  True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.    Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing.   Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.    Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch      SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SHOOTERS CUT SET OF TWO    Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.     Protective Value Added    We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened   Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.   Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.    Laser Cut to Protect Ballistic Integrity   All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Blazing The Trail of Innovation  Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!   Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Plate Weight (per plate):    9.5”x12.5” AR550 Shooters Cut Single Curve Full Coat = 9 lbs 5 oz.    Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness   Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6 oz (base coat), 3lbs 12oz (full coat).    AR550 Body Armor - Shooters Cut Specs:   Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only       See a Comparison of Our Full Line of Body Armor:             Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:       Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.       The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.      

Spartan Armor Systems Active Shooter Kit With Level III+ AR550  Spartan Armor Systems AR550 Body Armor with Hydra Plate Carrier. This active shooter kit set up is designed to allow a quick response time and comfortable performance fit with superior Level III+ Rifle Rated Protection. Carrier includes emergency drag handle, quick cinch adjustments for the front and hook and loop adjustments on the shoulders. The Spartan Armor Active Shooter Kit is perfect for rapid response situations.  Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.  Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.   The Hydra Plate Carrier is a highly adaptable carrier ideal for quick deployment and emergency situations such as active shooter scenarios. Easily adjustable buckles ensure a snug and comfortable fit on the sides. Ample length shoulder straps allow the Hydra plate carrier to be easily adjusted to fit a wide variety of body types. Breathable mesh is used at chest, back and shoulder contact points to allow for maximum breathability. The Hydra plate carrier is a great choice for anyone looking for a lightweight and versatile body armor configuration. Front map pocket Emergency drag handle Removable padded mesh shoulder pads with hook and loop guides Adjustable shoulder straps Hook and loop webbing Heavyweight webbing for modular attachments Padded mesh interior lining Quick adjust cinches Quick release buckles Easy access plate pockets Waist Size: 30″ – 46″ adjustable sizing Accepts traditional Medium or Large SAPI plates up to 10.25″ x 13.25″. Best fit for our shooters cut and swimmers cut AR500 and AR550 body armor. This package includes our Level III+AR550 10x12 Armor. 1/4" thickness and provides the operator with Level III+ protection IAW NIJ0101.06 standards.      Our Level III+ AR550 Armor has been tested to go beyond the Level III testing protocol (6 shots .308/M80 Ball, 2780 fps).  Special Threat Ratings: SS109/M855 3505 fps 6 shots 30-06 up to 2,719 fps     With all of our AR550 Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR550! All purchases of our Spartan Armor products have current lab certificates and secondary ballistics available on request. Remember, not all body armor is created equal!  Coating Options:  Choose the Full Coat option to have the plate lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities. To learn more check out our blog on the coating options: https://www.spartanarmorsystems.com/blog/encapsaloc-fragmentation-mitigation-antispall-body-armor-coating/   Chest Plate Weight (per plate): 10x12 AR500 Omega Armor Shooters Cut: Base Coat 8lbs 7oz. Full Coat 9lbs 3oz.      Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.         *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SINGLE PLATE With Base Coat Corrosion Protection    Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Shooters Cut Plate Weight (per plate): 8”x10” AR550 Shooters Cut: Base Coat 5lbs 5oz. Full Coat 6lbs 1oz. 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs. Swimmers Cut Plate Weight (per plate): 8x10 AR550 Swimmers Cut: Base Coat 4lbs 6oz. Full Coat 4lbs 14oz. 10x12 AR550 Swimmers Cut: Base Coat 6lbs 10oz. Full Coat 7lbs 8oz. 11x14 AR550 Swimmers Cut: Base Coat 8lbs 5oz. Full Coat 8lbs 13oz.   Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.        

SPARTAN™ OMEGA™ AR500 BODY ARMOR SINGLE PLATE With Base Coat Corrosion Protection Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.   Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor! Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.   Chest Plate Weight (per plate):  8”x10” Plate: Base Coat 5lbs 13oz. Full Coat 6lbs 7oz 10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz. 11"x14" Plate: Base Coat 10lbs 1oz. Full Coat 11lbs 6oz. Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only Includes 1 Armor Plate Per Order Available in Shooters Cut or Swimmers Cut   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

Individual First Aid Kits (IFAK) | Spartan Armor Systems™ Our Spartan Armor Systems™ Individual First Aid Kit (IFAK) sets the standard for comprehensive MOLLE based medical kits. We provide you with all the essentials….nothing more, and nothing less. The Spartan™ IFAK includes all of the necessary aids required to treat life threatening bleeding wounds (knife/stab wounds, gunshots, or other serious bleeding injuries including arterial bleeding). At Spartan Armor Systems™ we provide you with packaged and pre-sorted components, yet there is still room in your IFAK to add your personal touches. Rest assured you’re going to the range with a COMPLETE first aid kit that will handle most range-related injuries. Some benefits of the Spartan™ IFAK is that it is compact, portable, and designed to be attached to your MOLLE compatible gear (plate carrier, range bag, or even your backpack). The best thing about the Spartan Armor Systems™ IFAK is its rapid deployment characteristics. With readily accessible design and compact size, rapid deployment is very easily achieved. This IFAK is designed to be unzipped quickly and features an adjustable retention cord which prevents the pouch from opening all the way and releasing the contents. The result is an extremely compact, stable platform which promotes rapid donning of your first aid supplies. The contents of the Spartan Armor Systems™ IFAK include the following… (1) Spartan Armor Systems™ Tactical IFAK Pouch with MOLLE first aid pouch (Choose color below) (1) Spartan Armor Systems™ Trauma Shears (1) Color matching Velcro medical patch (removable) (1) Celox™15g Hemostatic Granule Packet (1) Swat-Tourniquet (Swat-T Tourniquet pressure dressing elastic bandage) (2) Foxseal Chest Seals (in single package) – or equivalent based on availability (1) 4″ Sterile Compressed Bandage (1) Olaes® 4″ Modular Bandage (for treatment of moderate hemorrhage) (1) Waterproof Medical Tape – .5″ x 2.5 yards (1) Pair Heavy Duty Tan Nitrile Medical Gloves (Universal Size) It is important to remember that comprehensive training should be received prior to deploying your IFAK. Each and every IFAK comes pre-assembled and ready for immediate use. We recommend reviewing all of the contents of our IFAK for their limitations/capabilities and we also recommend recurring training to stay current on emergency first aid procedures.  

The ALL NEW MAXX-DRI VEST 3.0 has been completely re-designed to MAXXIMIZE body armor ventilation, airflow and improve weight-distribution of your ballistic vest, making it feel lighter and more comfortable on your body!! The MAXX-DRI Vest allows exceptional ventilation and cooling making it perfect for extended duty use by Law Enforcement, Security Professionals and Civilians who train often. Wearing a plate carrier for a long period of time, or even just in a warm climate creates additional fatigue and dehydration for the operator. We highly recommend the MAXX-DRI Vest to increase the comfort of your plate carrier and reduce fatigue. FEATURES Patented Full Maxx-Dri Construction (Maxximum body armor ventilation) NEW patented dual-chambered design for increased cooling/ventilation NEW Velcro Side Closures for easy donning and doffing NEW Stay-put Grip Technology prevents your Maxx-Dri vest from shifting Triple reinforced stitching for Maxximum strength and durability Lifetime Warranty against manufacturer defects (does not include wear) FULL 360 DEGREE COVERAGE everywhere your body armor rests Velcro shoulder straps allow you to keep it secured to your body armor Anti-microbial and Anti-Fungal Does not retain moisture Anti-Gravity effect helps reduce neck/back pain and fatigue A decrease in the likelihood of developing dangerous skin rashes and infections A less stinky under shirt and a less sweat-soaked body armor carrier to bring home to launder An overall feeling of comfort by having your ballistic vest feel lighter on your body N.T.O.A. Member Tested and Recommended   

Finally, a way to hang your plate carrier for easy storage! The Tough Hook is the perfect way to hang your outfitted plate carrier. With a 150+ lbs load capacity and a versatile design, the Tough Hook can handle a wide variety of tactical gear. Each Tough Hook hanger is made of GP22 high impact ABS plastic and manufactured in the USA.

Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA   Product Overview  True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.    Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing.   Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.    Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch 

PRODUCT SPECS Emergency drag handle Removable padded anti-slip shoulder pads with hook and loop guidelines Adjustable shoulder straps MOLLE webbing for modular attachments Hook and loop webbing Front map pocket with snap, hook and loop closure Back auxiliary pocket with hook and loop closure Adjustable cummerbund with built-in soft armor pockets Breathable 3D Mesh liner Ballistic plates/soft armor not included Easy access plate pockets Plate Capacity: Small/Medium: accepts Medium BALCS/SPEAR cut soft armor & plates up to 10” x 12.5” Large/X-Large: accepts Large BALCS/SPEAR cut soft armor & plates up to 11” x 14” (Plate thickness should be less than 1/2” to fit) Cummerbund Size: Small/Medium: adjustable from 34” - 42” Large/X-Large: adjustable from 43” - 50” Soft Armor cummerbund capacity: Small/Medium: accepts Medium 6” x 10” soft armor Large/X-Large: accepts Large 6” x 12” soft armor CONDOR EXO PLATE CARRIER GEN II Condor had maximum protection in mind when it came this plate carrier. The Condor EXO Gen II Plate Carrier is designed to hold soft armor and plates. The EXO Plate Carrier will not leave you unprotected when you need it most whether you are just being prepared or knowingly entering a dangerous environment. This carrier offers a padded interior and shoulders for the utmost comfort and articulation. You will never have to worry again about performance as the EXO Plate Carrier will keep you performing at the best of your ability so the team doesn’t have to use the emergency drag handle because you can hardly keep up. PRODUCT SPECS Emergency drag handle Removable padded anti-slip shoulder pads with hook and loop guidelines Adjustable shoulder straps MOLLE webbing for modular attachments Hook and loop webbing Front map pocket with snap, hook and loop closure Back auxiliary pocket with hook and loop closure Adjustable cummerbund with built-in soft armor pockets Breathable 3D Mesh liner Ballistic plates/soft armor not included Easy access plate pockets Plate Capacity: Small/Medium: accepts Medium BALCS/SPEAR cut soft armor & plates up to 10” x 12.5” Large/X-Large: accepts Large BALCS/SPEAR cut soft armor & plates up to 11” x 14” (Plate thickness should be less than 1/2” to fit) Cummerbund Size: Small/Medium: adjustable from 34” - 42” Large/X-Large: adjustable from 43” - 50” Soft Armor cummerbund capacity: Small/Medium: accepts Medium 6” x 10” soft armor Large/X-Large: accepts Large 6” x 12” soft armor

TRAUMA PAD SET OF TWO - SINGLE PAD   Product Overview Spartan Armor Systems® Non-Ballistic Trauma Pads utilize extremely light micro-cellular urethane foam padding that significantly decreases backface deformation and dissipates the impact energy sustained on your plate armor, reducing the transmitted force to the operator’s body. Additionally, our trauma pads dramatically increase comfort and ergonomics while wearing body armor. Simply put, the Spartan Armor Systems® Trauma Pad will drastically reduce blunt force trauma by absorbing energy over the increased surface area of the pad.   Increasing Comfort While Decreasing Trauma Backface deformation has the potential to occur when a round impacts any type of body armor. This energy transfer has the potential to be felt regardless of which advanced Spartan Armor Systems® body armor ballistic panel you decide to protect yourself with. In minor cases, the result is bruising around the area of impact. However, in more severe cases backface deformation can result in serious bruising, skin puncture, internal bleeding, and even broken bones. Though most of our body armor has inherently good energy disbursing properties throughout the strike face, our advanced Trauma Pads will further mitigate energy transfer and back face deformation hazards which your body may absorb. The added benefit of the sleek and thin .25” Trauma Pad is increased comfort and mobility, as the pad itself serves as a cushion between body armor plates and the operator. Spartan Armor Systems® Trauma Pads are constructed utilizing highly durable and comfortable Nylon Ripstop fabric, the same material BDUs are made from. We recommend the use of trauma pads with all body armor, especially ceramic body armor which is more prone to backface deformation.    Spartan Armor Systems® Trauma Pad Specs:  Dimensions: 8″ X 10″, 10″ X 12″, Or 11″ X 14″ – Compatible With All Spartan Armor Systems® Body Armor Chest Pad Weights: 4.9 Ounces (Per 8″x10″ Chest Pad), 5.7 Ounces (Per 10″ X 12″ Chest Pad), 6.4 Ounces (Per 11″ X 14″ Chest Pad) Thickness: .25″ Thin Profile

Features: Holds radio, with space for antenna, ear bud, and/or microphone Elastic band and hook and loop flap MOLLE compatible Overall dimensions: 8"H x 4.5"W x 2"D Available in: Olive Drab Black Navy Multicam Condor Radio Pouch Features: Holds radio, with space for antenna, ear bud, and/or microphone Elastic band and hook and loop flap MOLLE compatible Overall dimensions: 8"H x 4.5"W x 2"D Available in: Olive Drab Black Navy Multicam

Condor MOPC GEN2 Multicam The Condor Outdoor Modular Operator Plate Carrier is made up of quality nylon material and is designed for complete ballistic protection carrier (Ballistic plates/soft armor not included). MOLLE webbing surrounds the carrier to allow for modular attachments and personalization. The padded adjustable shoulder straps and cummerbund ensure a true fit. This unique cummerbund features integrated soft armor pockets and it’s compatible with our side plate. The interior is lined with 3D mesh to ensure ventilation and active comfort. The MOPC by Condor Outdoor is ready to take on any fight.   Specifications:  Cummerbund Size: Adjustable from 40" - 48" Plate capacity: Cummerbund accepts soft armor inserts up to 6" x 11" Accepts Medium or Large Swimmer/ESAPI plates up to 10.25" x 13.25 Removable low profile shoulder pads Adjustable shoulder straps Breathable 3D mesh liner Front map pocket with snap, hook and loop closure Adjustable cummerbund with built-in soft armor pockets MOLLE webbing for modular attachments Hook and loop webbing Easy access plate pockets Ballistic plates/soft armor not included Imported **Gen2 cummerbund will only accept soft armor.    

Spartan Armor Systems and Nine Line Apparel teamed up in creating a new Spartan Armor Systems T-shirt. Get yours today, 2 different styles and colors!   Sizing: Small Medium Large XL 2XL3XL   *Standard shirt sizing*

Overview Warrior’s Covert Plate Carrier (CPC) is a low profile slick armor carrier designed to hold 10 x 12 plates and US style SAPI Plates. The CPC is fully adjustable on the shoulders for size. The  sides are made from double layer high quality elastic, and incorporate 2 internal pouches on each side which can hold mag pouches and/or radio. The sides are fully adjustable for girth by way of Velcro closure. The CPC can be upgraded to create the CPC-MK1 Combo by adding Warrior’s TVMP Triple Velcro Mag Pouch for 5.56mm mags, which attaches to the front of the carrier by means of Velcro and is then secured shut by overlapping the Velcro elements of the side elastic side sections. Made from Genuine U.S. Mil Spec materials.) 500D Nylon Performance Specifications Weight: 7.1 Ounces per Square Yard Tensile Strength: Warp 453 lbs / Fill 348 lbs Tears Strength: Warp 14.1 + lbs / Fill 14.1 + lbs Abrasion: Wear Cycles 1955 Water Repellency: 100% Webbing Genuine US Mil Spec Webbing Standard Color Option include Genuine Crye Multicam, Coyote 25mm (1 Inch ) Breaking Strain: 1200 lbs 38mm (1.5 Inch ) Breaking Strain: 1800 lbs 50mm (2 Inch ) ) Breaking Strain: 2200 lbs Threads Thread quality is fundamental to the construction, durability and strength of tactical equipment.Two factors have a negative impact on the life Span of threads1) Mildew is one of the most common factors in the deterioration of military kit, causing it to rot and ultimately results in unacceptable failure.2) Sunlight has a harmful effect on the performance of threads, and over time causes their deterioration.Warrior only uses the highest quality US Mil Spec nylon threads imported from the USA which are threaded against both UV and Mildew.

The Condor Defender Plate Carrier is designed to carry both soft armor and plate. It will accept Large or X-Large SPEAR/BALC cut soft armor, up to 10.25" x 13.25" front and back plates, and up to 6" x 8" side plates. The DFPC also features mesh padding for airflow and padded shoulders for added comfort. The Condor Defender Plate Carrier The Condor Defender Plate Carrier is designed to carry both soft armor and plate. It will accept Large or X-Large SPEAR/BALC cut soft armor, up to 10.25" x 13.25" front and back plates, and up to 6" x 8" side plates. The DFPC also features mesh padding for airflow and padded shoulders for added comfort. Available in genuine Crye-Precision™ MultiCam® Emergency drag handle. Removable padded shoulder pads, with hook and loop guides Adjustable shoulder straps Heavyweight webbing for modular attachments Padded mesh interior lining Adjustable cummerbund with soft armor pockets Accepts up to 6" x 8" side panel plates Internal sleeves for soft armor Easy access plate pockets Adjustable in girth and height Medium - XX-Large adjustable sizing Accepts Large or X-Large BALCS/SPEAR cut soft armor, and plates up to 10.25" x 13.25" Imported

SPARTAN ARMOR SYSTEMS® SPARTAN DL PLATE CARRIER Product Overview When the environment you are operating in demands discretion and stealth, the Spartan Armor Systems® DL Plate Carrier offers minimalist features for extreme concealment. Virtually indiscernible when worn beneath loose clothing, these ultra-minimalist carriers are designed to fit with Spartan Armor Systems® Flex Fused Core Soft Armor Panels. Covert, comfortable, and concealed - the Spartan DL Plate Carrier is made for environments that demand maintaining a low profile. The Spartan DL Concealment carrier can also be worn overt (on the outside of clothing) and can accept hard armor such as Spartan™ Omega™ AR500, AR550, or Armis IIIA Hard Armor. Rugged, Reliable, Versatile The Low-profile design of the Spartan Armor Systems® DL Plate Carrier features bottom-loading plate insertion capability and a 4” fully adjustable cummerbund. This carrier comes in two sizes and can accommodate 10"x12" or 11"x14" body armor plates. The 500 Denier/Nylon blended material makes for an extremely durable, comfortable carrier that will flex and bend, contouring to your torso as you move throughout your day and activities. The inclusion of built-in soft Mag Pouches provides a tactical advantage. The Spartan DL Plate Carrier can accept AR Mags as well as a Pistol Mag (2 on each side) for versatility and quick access to your reloads.  Spartan Armor Systems® Spartan DL Plate Carrier Specs:  Low-profile Minimalist Carrier Bottom-loading Design Supports The Plate In The Pocket 4″ Fully Adjustable Elastic Cummerbund 2” Low Profile Shoulder Adjustment Velcro On Front And Back For Name, Id, Blood Type, Etc. Material: 500 Denier Nylon/Pu Nylon Webbing Size: 11.4" X 12.5" Integrated Mag Pouches Hold M4 Mags As Well As A Pistol Mags (2 On Each Side) Note: Due to the extremely low profile design of the Spartan DL Plate Carrier, they WILL NOT ACCEPT SIDE PLATES. Note: The Spartan DL Plate Carrier will hold 10"x12" Swimmers and Shooters Cut plates. Click Here to view Spartan DL and Flex Fused Core™ IIIA Soft Armor Package

SPARTAN ARMOR SYSTEMS® "SPARTAN" SWIMMERS CUT PLATE CARRIER   Product Overview The Spartan Armor Systems® "Spartan" Swimmers Cut Plate Carrier is designed for use with our Swimmers Cut steel core armor: Spartan™ Omega™ AR500 and AR550. This minimalist “Spartan” carrier is designed for those seeking speed, agility, and ultimate maneuverability in their carrier. The Swimmers Cut Plate Carrier is adjustable from a Medium size to XL and can accommodate 6”x6” side plates in the cummerbund, should you desire to run it with enhanced side protection. Intended for highly active environments that require the wearer to remain nimble, this carrier is constructed of extremely durable 860 Denier poly construction, fits 10”x12” swimmers cut plates which provide coverage where you need it most, but reduces weight and allows for enhanced mobility by eliminating a small amount of plating from the shoulder regions. Don’t let the paired down design fool you though, this versatile and effective carrier affords a good degree of customization with PALS webbing on the front and back sides for the attachment of molle accessories and pouches, and velcro on front and back for patch placement and identifiers. If you’re looking for a versatile plate carrier that allows for a greater range of motion and mobility that won’t break the bank, the Spartan Swimmers Cut Plate Carrier is for you.   Spartan Armor Systems® “Spartan” Swimmers Cut Plate Carrier Specs: Lightweight Plate Carrier That Accepts Side Plates Designed For Spartan Armor Systems® 10" X 12" Swimmers Cut Steel Core Plates Adjustable From Medium To XL PALS Webbing On Front And Back For Versatility Velcro On Front And Back For Patch Placement Cummerbund Is Designed To Hold 6" X 6" Side Plates Comfortably Shoulder Pads Included 860 Denier Poly Construction Reinforced Drag Handle NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems®. We can not guarantee a fit with plates made by other manufacturers.

SPARTAN ARMOR SYSTEMS® "SPARTAN" SHOOTERS CUT PLATE CARRIER   Product Overview The Spartan Armor Systems® "Spartan" Plate Carrier is true to its name: sleek, minimalist, and highly capable on the battlefield. Designed to be lightweight, agile, and to enable the wearer to rapidly engage, the Spartan Armor Systems® “Spartan” Shooters Cut Plate Carrier is designed for use with our shooters cut steel core armor: Spartan™ Omega™ AR500 and AR550. Adjustable from Medium to XL, this carrier fits 10”x12” shooters cut plates and will accommodate 6”x6” side plates in the cummerbund. The Spartan Shooters Cut Plate Carrier is built to last and gives you the key essential features you need without sacrificing quality. The Spartan Shooters Cut Carrier is a great entry-level carrier that offers a variety of features at an affordable price point. When the situation dictates less is more, this carrier delivers the goods where it counts.    Spartan Armor Systems® Spartan Shooters Cut Plate Carrier Specs: Lightweight Plate Carrier That Accepts Side Plates Designed For Spartan Armor Systems® 10” X 12” Shooters Cut Steel Core Plates Adjustable From Medium To XL PALS Webbing On Front And Back For Versatility And Customization Velcro On Front And Back For Id Patch Placement Cummerbund Is Designed To Hold 6” X 6” Side Plates Comfortably Shoulder Pads Included 860 Denier Poly Construction Reinforced Drag Handle  

The M4 Double Mag Pouch will secure two M4/M16 mags. This pouch will secure the mags with a velcro flap to make sure your mags aren't going anywhere untill you reach for them. Import   NOTE: Magazines not included.

SPARTAN ARMOR SYSTEMS ® ADVANCED INDIVIDUAL FIRST AID KIT (AFAK)   Product Overview Includes select first aid and trauma tools to handle and treat severe bleeding, airway/respiratory issues, and more. The AFAK features the 600 D Compact IFAK Ripaway Pouch to efficiently store and organize critical life-saving and wound care components and allows the responder to rapidly and reliably address scenarios with the proper products. We highly recommend this kit for LEO/MIL and standard civilian use.    Ability To Respond Being able to assess and address life-threatening injuries and wounds in the field, from minor cuts and abrasions to more extensive life-threatening injuries, is a crucial skill that requires a capable tool-set. The Advanced Individual First Aid Kit (AFAK) by Spartan Armor Systems® was designed to allow operators to be their own first-responder and to attend to colleagues when traumatic scenarios occur. Don’t be caught in a critical moment without the components you need to assist and rescue. The AFAK is a compact kit that can easily be stowed in a vehicle, backpack, locker, and virtually any other easy-access location.    Advanced Individual First Aid Kit (AFAK) Specs and Components: 600 D Compact IFAK Ripaway Pouch WithMolle and Velcro  NAR Combat Application Tourniquet (CAT) in Black Triton Grip SE Nitrile Gloves Large NAR S Rolled Gauze- 4.5 x 4.1 yards NAR Emergency Trauma Dressing- 4" (FLAT) Hyfin Vent Compact Chest Seal Twin Pack Rusch Latex Free Robertazzi 28fr Naso Airway With lube 5.5 EMT Shears Black Handle Survival Rescue Blanket-Compact TCCCC Cards 1 Sharpie Marker

Features: Tri-fold design Multiple pockets and elastic loops for storage Double zipper closure Additional 2" webbing, with pull-tab for quick/temporary closing Two inch patch area across front of pouch Wide handle for carrying or rapid removal Two D-rings on the back for shoulder strap The Condor Rip-Away EMT Pouch The Condor Rip-Away EMT Pouch carries all your 1st aid gear. The pouch is designed to be rip-away from the modular platform when needed, and the strap on the platform keeps it from falling off accidentally. The Rip-Away design gives the ability to utilize the bag in place or "rip" it away for easier access or even to transfer items to another medic. Features of Condor Rip-Away EMT Pouch Tri-fold design Multiple pockets and elastic loops for storage Double zipper closure Additional 2" webbing, with pull-tab for quick/temporary closing Two inch patch area across front of pouch Wide handle for carrying or rapid removal Two D-rings on the back for shoulder strap

The M4 Double Pistol Mag Pouch can fit two M4/M16 mags in EACH pouch. Having the velcro flap will secure your mags and won't go anywhere until you need them.  Each pouch holds 2 M4 Mags Has adjustable hook loop flap Includes grommets for drainage

Condor Singe Flash Bang Mag Pouch Specifications: Overall dimension: 5.25"H x 2.25"W x 2"DMag Capacity:Fits One flashbang (not included)

The Condor Handcuff Case is a compact carrying case that can store up to two pairs handcuffs. The flip-open design features a hook and loop closure for maximum security, while still providing quick access thanks to a pull tab on top that makes opening and closing simple. While it cannot accommodate two sets of ASP cuffs, it can fit one pair of ASP cuffs, one set of Peerless cuffs or two sets of Peerless cuffs, providing you with a versatile case for your load out. Features of Condor Handcuff Case Depth: 1.25" Rugged nylon construction Hook and loop closure Dedicated top pull tab Protective internal divider Can be mounted on a belt or universal webbing Cannot fit two sets of ASP cuffs Can hold either one pair of ASP, one pair of Peerless or two pairs of Peerless cuffs Handcuffs not included

Specifications Holds six M4/M16 mag Adjustable hook & loop flap Import Note: Magazines not included.

This Condor Double Pistol Mag Pouch secures your mags with a reinforced full flap of velcro to ensure your pistol mags aren't going ANYWHERE until you reach for them. Secure your Double Pistol Mag Pouch to your carrier, put your mags in and you are ready for what comes your way. Fits all 9mm, .40, .45 common handgun mags.  

The Condor Sidekick pouch is a low profile, versatile, utility pouch for all your tools, such as allen wrench, mini flashlight, pocket knife, pen, and other accessories. The para-cord creates a 90 degree angle and makes it work station. Features of Condor Side Kick Pouch Fully opens with paracords to adjust One internal pocket Multiple elastic holders One external pocket with zipper closure Webbing over entire pouch for more attachments 3"H x 5"W ID/ Patch panel

Warrior Assault Systems Low Profile Carrier V1 MK1   The Patent Pending Warrior Laser Cut Low Profile Plate Carrier (LPC) is at the forefront of cutting edge innovation. Manufactured using our proprietary laminate material and precision cut using the highest quality laser technology for optimum production accuracy to produce a flawless lightweight solution.  Designed with direct input from serving operators within the SF community, the Laser Cut LPC incorporates many new features that combine to make it one of the best carriers on the market today.  The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.  The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.  Holds stand-alone plates front and back.    Features:  Laser Cut  Proprietary Laminated Material  Lightweight  Thermo Pads for Cooling  Thermo Pads for Comfort  Quick Release Speed Clips  Interchangeable Front Panels  Upper Admin Pocket  Removable Shoulder Pads  Low Profile  Holds side plates 

Spartan Armor Systems is proud to offer the DCS (Dynamic Combat System) plate carrier by Warrior Assualt Systems. The DCS Special Forces plate carrier is lightweight with removable sides. The DCS plate carrier is a perfect fit with our 10x12 Shooter's Cut body armor which is available in level III and level III+. Additionally, the DCS carrier allows 6x6 and 6x8 side plates. The DCS is fully adjustable for height and width, comes with 3D Spacer mesh lining for cooling and comfort.   Specifications:  500D Cordura Performance Specifications Weight: 7.1 Ounces per Square Yard Tensile Strength: Warp 453 lbs / Fill 348 lbs Tears Strength: Warp 14.1 + lbs / Fill 14.1 + lbs Abrasion: Wear Cycles 1955 Water Repellency: 100% Webbing Genuine US Mil Spec Webbing Standard Color Option include Genuine Crye Multicam, Coyote, A-TACS AU, A-TACS FG Special Projects Color Options include Black, Ranger Green, Olive Green 25mm (1 Inch ) Breaking Strain: 1200 lbs 38mm (1.5 Inch ) Breaking Strain: 1800 lbs 50mm (2 Inch ) ) Breaking Strain: 2200 lbs Infra-Red Properties All our Clips, Fabrics, Plastic Hardware, Threads and MultiCam/Coyote Webbing are treated at source to deliver the lowest I.R. Signature possible. This product is capable of holding NEXUS soft armor and hard armor.

High Speed Gear's line of polymer TACOs® function much the same as their nylon counterparts. The body and brackets are made with a durable and flexible, proprietary polymer and are laced together with bungee cord for the same versatility our customers have come to expect from the TACO® brand. As with the originals, these pouches grip and retain a wide variety of pistol magazine styles, calibers and small tools, like knives, multitools and flashlights. Key Features: • Mounts to both MOLLE and belts up to 2” with our new universal HSGI® Clips • Pop lock configuration orients excess bungee down and out of the way • Features grommet on bottom for drainage • Made with water proof materials (does not waterproof inserted items) • Flared tops enable easy reinsertion of magazines •Universal mounting configuration works with most mounting hardware   NOTE: Magazines not included.

SPARTAN ARMOR SYSTEMS® SENTINEL SWIMMERS PLATE CARRIER Product Overview The Spartan Armor Systems® Sentinel Swimmers Plate Carrier is specifically designed and cut to accommodate Swimmers Cut Body Armor Plates manufactured by Spartan Armor Systems®. Sleek, ergonomic, comfortable, and designed for highly kinetic environments when movement and speed are of utmost importance, the Sentinel Swimmers Plate Carrier is ready for action.  Made To Move Weighing in at a mere 2lbs. 9oz. the feature-rich Sentinel Swimmers Plate Carrier is made of highly durable, long-lasting 1000 denier material and features ventilated mesh padding, emergency drag handle, and a removable cummerbund with side plate pockets for 6"x6" and 6"x8" side plate armor. Designed to pair perfectly with our Swimmers Cut Spartan™ Omega™ AR500 and AR550 steel core armor, this carrier provides the operator with increased mobility, increased comfort, and a decrease in weight, while minimally sacrificing armor coverage. The smaller, more compact, and lightweight form factor of the Spartan Armor Systems® Sentinel Swimmers Cut Plate Carrier makes it an ideal carrier for active situations that require rapid response, while still providing coverage to vital organs. Spartan Armor Systems® Sentinel Swimmers Plate Carrier Specs: Adjustable Size Ranging From M To 2XL Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Padded Elevated Mesh On The Interior Of The Carrier For Breathability Fits 10"X12" Swimmers Cut Plates Removable Cummerbund With Side Plate Pockets For 6"X6" And 6"X8" Side Plate Armor Velcro In Front Of The Carrier Is 8x4” With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9x3” Extremely Durable Carrier Material That Can Withstand Wear And Tear Over A Long Period Of Time 1000 Denier Bottom-loading Weighs 2lbs. 9oz. NOTE: This carrier is designed to fit swimmer’s cut plates manufactured by SPARTAN ARMOR SYSTEMS®. We can not guarantee a fit with plates made by other manufacturers. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates!

SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER   Product Overview The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.  Ready For Anything Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike. Spartan Armor Systems® Sentinel Plate Carrier Specs: Adjustable from 38" To 48" Chest Size Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Padded Mesh Separators For The Interior Of The Carrier For Breathability Fits 10" X 12" Shooters Cut Plates Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9” X 3” Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 2lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.

SPARTAN ARMOR SYSTEMS® SENTINEL LEGION XL PLATE CARRIER    Product Overview The Spartan Armor Systems® Legion XL Plate Carrier is rugged, reliable, and fully adjustable from 2XL-4XL. Designed to hold our 11”x14” body armor plates, the Legion XL can also accommodate 6”x6” or 6”x8” side plates for additional protection and features a completely removable cummerbund. Developed For You Born of numerous customer inquiries and feedback, we developed the Sentinel Legion XL Plate Carrier to be adjustable from a 2XL-4XL size. The Sentinel Legion XL weighs in at approximately 3lbs. 9oz., will hold our Steel Core AR500 Omega and AR550 11”x14” body armor plates, while also offering the option to add in 6"x6" or 6"x8" side plates. If you don't want to run the Sentinel Legion XL with the cummerbund - no sweat! The cummerbund is easily removable so you can run your plate carrier with just the front and back plates or the full set-up with side plates. Comfort And Convenience The Spartan Armor Systems® Legion XL Plate Carrier includes features designed for customization, modularity, and comfort while affording supreme protection in the field. Anti-slip shoulder padding with velcro, side release buckles on the waist strap, and elevated mesh for breathability make this one big, bad, carrier.  Sentinel Legion XL Plate Carrier Specs:  Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Elevated Mesh Allowing For Extreme Breathability  Holds 11"X14" Front And Back Plates Removable Cummerbund With Side Plate Pockets For 6"X6" And 6"X8" Armor Velcro In Front Of The Carrier Is 8"x4" With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9x3 Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 3lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.

Our patented line of polymer TACOs® function much the same as their nylon counterparts. The body and brackets are made with our durable and flexible, proprietary polymer and are laced together with bungee cord for the same versatility our customers have come to expect from the TACO®brand. As with the originals, these pouches grip and retain a wide variety of magazine styles and calibers. Key Features: • Mounts to both MOLLE and belts up to 2” with our new universal HSGI® Clips • Pop lock configuration orients excess bungee down and out of the way • Features grommets for drainage • Made with water proof materials (does not water proof inserted items) • Flared tops enable easy reinsertion of magazines • Features attachment points on front for addition of other pouches • Opposite interior magazine catch channels enable smooth insertion of both left- and right-facing AR-style mags • Universal mounting configuration works with most mounting hardware

Our patented line of polymer TACOs® function much the same as their nylon counterparts. The body and brackets are made with our durable and flexible, proprietary polymer and are laced together with bungee cord for the same versatility our customers have come to expect from the TACO®brand. As with the originals, these pouches grip and retain a wide variety of magazine styles and calibers. Key Features: • Mounts to both MOLLE and belts up to 2” with our new universal HSGI® Clips • Pop lock configuration orients excess bungee down and out of the way • Features grommets for drainage • Made with water proof materials (does not water proof inserted items) • Flared tops enable easy reinsertion of magazines • Features attachment points on front for addition of other pouches • Opposite interior magazine catch channels enable smooth insertion of both left- and right-facing AR-style mags • Universal mounting configuration works with most mounting hardware

Our patented line of polymer TACOs® function much the same as their nylon counterparts. The body and brackets are made with our durable and flexible, proprietary polymer and are laced together with bungee cord for the same versatility our customers have come to expect from the TACO®brand. As with the originals, these pouches grip and retain a wide variety of magazine styles and calibers. Key Features: • Mounts to both MOLLE and belts up to 2” with our new universal HSGI® Clips • Pop lock configuration orients excess bungee down and out of the way • Features grommets for drainage • Made with water proof materials (does not water proof inserted items) • Flared tops enable easy reinsertion of magazines • Opposite magazine catch channels inside rifle magazine portion enable smooth insertion of both left- and right-facing AR-style mags • Universal mounting configuration works with most mounting hardware

This compact leg rig is perfect for a day at the range, a training class or in the field when you want to run a low-profile set up. The combination of 2 Double Decker Tacos and an additional Pistol Taco between them gives you an endless number of applications. It is easily adjustable to your mission or training. The Double Decker TACO® combines our modular rifle mag pouch and a modular pistol mag pouch into one secure unit. This unique pouch can securely hold an infinite combination of mags and other accessories. The original Taco® forms the base and USGI, HK, PMAG, ARC, FAL, AK 30/ 40, LR20 and M14 magazines are all held securely and deployed easily and silently on demand. The Taco® even works for certain radios, flash bangs and smoke grenades and provides this versatility while taking up only 3” horizontal inches on your platform. On top, we attached a Pistol Taco®. This versatile pouch will hold almost any pistol magazine. Single stack, double stack. It makes no difference. 1911, HK 45, M9/Beretta 92, Glock, XD mags are all held securely . The Pistol Taco® can also hold a variety of multi-tools and flashlights. All Taco® pouches are made of Cordura, an injection molded polymer and shock-cord. The pouches maintain a positive, adjustable grip of the mags and do not require any other securing systems unless desired. Webbing tabs are sewn in on the top for use of "over the top" bungee retainers (not included). Additional loop Velcro® is sewn in the inside of the rifle pouch if the user wishes to use adhesive backed hook velcro on his magazine body for added security. The padded leg panel attaches to your belt in two places for comfort and function. The padded mesh back and rubberized leg strap ensure performance and stability. Running, jumping or lunging will not displace this panel from where you want it. Covered by HSGI's® Lifetime Warranty. Note: TACOS are threaded together and cannot be reused in other configurations.  

The molle Radio Pop-up TACO® uses HSGI's patent-pending TACO® technology and durable webbing in multiple sizes to create a secure but easily accessible storage solution for a wide variety of items, including Mil/LE personal communication devices. Comes with HSGI® clips for easy installation on PALS 2" x 3" x 6.5" - .33lbs 5cm x 762cm x 16.5cm - 150g

The Double Decker TACO® combines our modular rifle mag pouch and a modular pistol mag pouch into one secure unit. This unique pouch can securely hold an infinite combination of mags and other accessories. The original TACO® forms the base and USGI, HK, PMAG, ARC, FAL, AK 30/ 40, LR20 and M14 magazines are all held securely and deployed easily and silently on demand. The TACO® even works for certain radios, flash bangs and smoke grenades providing versatility while taking up only 3 horizontal inches on your platform. On top, we attached a Pistol TACO®. This versatile pouch will hold almost any pistol magazine. Single stack, double stack; it makes no difference. 1911, HK 45, M9/Beretta 92, Glock, XD mags are all held securely and deployed easily and silently on demand. The Pistol Taco® can also hold a variety of multi-tools and flashlights. Both TACO® pouches are made of Cordura™, an injection molded polymer and shock cord. The pouches both maintain a positive, adjustable grip of the mag and do not require any other securing systems unless desired. Webbing tabs are sewn in on the top for use of "over the top" bungee retainers (not included). Additional loop Velcro® is sewn in the inside of the rifle pouch if the user wishes to utilize adhesive backed hook Velcro® on his magazine body for added security.  

This molle handcuff pouch will hold almost any brand of handcuff.  Retention strap is adjustable in length.  Also ideal for dip cans and other similar products.  Dimensions: 1.5”H x 3.0”W x 4. 5”L