Soft Armor Inserts

Soft Body Armor Panel 5.75″x11.5″ (set of two) verified to fit Condor MOPC Gen II and EXO Gen II-S-M Cummerbund 5.75″X14″ (set of two) verified to fit Condor EXO Gen II L-XL Cummerbund 5″x14″ (set of two) verified to fit Chase Tactical MEAC and London Bridge Trading LBT 6094A Cummerbund Lightweight, ultra thin CaliberX™ .19″ thick Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Interior sewn together for longevity TSA Approved Proudly made in the U.S.A Side Panels are sold in a set of two Caliber Armor CaliberX Soft Armor Side Plate Panels Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density. We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing.

Made in the USA: This Tactical Scorpion Gear Level IIIA Concealable Ballistic Shirt is proudly made in the USA by dedicated craftsmen, ensuring premium quality, supporting local jobs, and delivering a product you can trust. Level IIIA NIJ Compliance: Stay cool & calm under fire knowing your gear has full Level IIIA compliance, even exceeding the latest US NIJ 0101.06 standards.  Superior Protection: The uniquely shaped soft aramid plates provide comprehensive front and back protection, going above and beyond the coverage of standard 10x12 plates. An armor you can rely on when situations escalate. Resilient Material: The shirt not only offers bulletproof features but also stands firm against corrosion and exhibits excellent performance in low temperatures, a robust companion in any environment. Breathable Spandex Blend: Crafted from a special spandex blend, this shirt assures comfort and breathability. It stretches to offer a snug fit, becoming virtually unnoticeable, ensuring maximum mobility during high-stakes situations. Introducing the Tactical Scorpion Gear Level IIIA Concealable Ballistic Shirt (TSG-014), an exceptional fusion of protection and discretion. Expertly crafted by their dedicated American artisans, this shirt is designed to safeguard front and back with uniquely shaped, soft aramid plates, delivering more coverage than standard 10x12 plates. Proudly made in the USA, this gear goes beyond expectation with full Level IIIA compliance, exceeding the latest US NIJ 0101.06 standards. Not only will this shirt provide resistance against six pistol rounds up to .44 Mag HP at 1430 fps at 5 meters, but it also displays unparalleled resilience against corrosion and impressive performance in low temperatures.Crafted from a special spandex blend, this shirt ensures breathability and a snug fit, making it nearly undetectable under your clothing. Removable inner armor plates make this shirt as practical as it is protective, allowing for easy care and washing.The Tactical Scorpion Gear Level IIIA Concealable Ballistic Shirt is more than just a piece of armor – it's a silent companion, unnoticeable but ever-present, offering optimal protection against unforeseen threats. Experience the assurance of American-made, NIJ-compliant armor designed with precision and care. Stay one step ahead with Tactical Scorpion Gear.                            TSG-014   Panel Size  Front Panel L x W & Length From Neck Down  Back Panel L x W   Medium            11” x 12.75” (11.5” at neck)  10” x 14.5”   Large            12” x 13” (11.5” at neck)  11” x 14.5”  Xlarge           12 5/8” x 14.5” (13” at neck)                         12” x 15”  ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NIJ tested Level IIIA Armor will defeat 6 pistol round shots up to .44 Mag HP – 1430 fps at 5 meters Protection Level Testing Bullets Weight of Bullet Speed of Bullet Shot Distance Effective Shots I .380ACP FMJ RN 6.2/95 322/1055 5m 6 .22 LRHV Lead 2.6/40 329/1080 5m 6 II A 40S&W FMJ 11.7/180 322/1055 5m 6 9MM FMJ RN 8.0/124 341/120 5m 6 II A .357 Mag JSP 10.2/158 436/1430 5m 6 .9mm FMJ RN 8.0/124 367/1205 5m 6 IIIA .44 Mag HP 8.0/124 436/1430 5m 6 9MM FMJ RN 15.6/240 436/1430 5m 6 III 7.62mm NATO M80 FMJ 9.6/148 838/2780 15m 6 IV 7.62mm Caliber M2 AP 1.8/166 869/2880 15m 1

Proudly Made in the USA and Berry Compliant: Support American industry while you ensure you're equipped with superior, locally-produced gear. NIJ 0101.06 Certified: Be confident that you're shielded by armor that meets the most rigorous industry safety standards, designed to keep our nation's bravest safe. Lightweight, Yet Robust Protection Against Handgun Rounds: Don't compromise on mobility or safety. This armor is light, allowing you to move freely and stay agile, while providing robust protection against common handgun threats. Constructed from High-Performance Woven Aramid Fibers: Rely on the strength of woven aramid fibers, crafting armor that can withstand the intensity of the field while keeping weight to a minimum. Water-Resistant Sonobond Sealed Ripstop Cover: Enhance your armor's durability and longevity with a ripstop cover, designed to keep the elements at bay, so your armor stays reliable, even in challenging conditions. Discover superior protection with the Shellback Tactical Level IIIA Model CLCIIIA Banshee Elite 3.0 Soft Armor Package. Manufactured in the USA and Berry Compliant, this package is tailored to flawlessly fit the Banshee Elite 3.0 plate carrier, providing an optimal balance of safety and comfort.Boasting NIJ 0101.06 certification, this lightweight soft armor package guarantees ballistic protection against common handgun rounds. This level of safety assurance lets you concentrate on the mission at hand, knowing you're well-protected. Available in three configurations, the package offers the flexibility to match your unique needs. You can choose from a plate backer set of two, cummerbund insert set of two, or the complete set, allowing for personalization of your protective gear.Composed of woven Aramid fibers, the armor is lightweight yet robust, presenting an aerial density of 1.55 PSF and thinness of .35". The protective cover, featuring Sonobond sealed ripstop, ensures water resistance, adding to the longevity and durability of the product.The armor comes with a five-year ballistic warranty, reflecting the confidence in its quality and performance. Note: This item is ITAR controlled and can only be shipped to US addresses. Due to the nature of this product, all sales are final.Stay shielded and order the Shellback Tactical Level IIIA Model CLCIIIA Banshee Elite 3.0 Soft Armor Package today, because your safety is their topmost priority. Rounds Defeated CARTRIDGE PROJECTILE VEL (ft/s ± 30) VEL (m/s ± 9) .357 SIG (NIJ06) 125 gr FMJ 1470 448 .44 Magnum (NIJ06) 240 gr SJHP 1430 436 .357 Magnum 158 gr JSP 1430 435 .44 Magnum 240 gr SWCGC 1400 426 9 x 19 mm  Parabellum 124 gr FMJ RN 1400 426 40 S&W 180 gr FMJ 1155 352   LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.     

Our Rimelig option is made of p-Aramid Fibers and is available at both Level II and Level IIIA protection levels, which both provide multi-hit protection. The Rimelig is the most budget option of the three, making it a solid entry-level soft armor option, while still staying true to the goal of soft armor: Reliable lightweight protection, at just 0.45” thick and weighing 1.24 pounds. The next level up is the Slim, which is made of two separate Aramid laminates joined together for greater strength. The symmetrical design of our Slim armor gives it a bidirectional capability, meaning it's perfect for use in a backpack, where you might use it on your back, or in front of you as a shield (slim armor panels will still have a "strike face" label, though it will be equally effective from either side, making it perfect for use in armored backpacks or bags). It provides Level IIIA protection and is only 0.36” and 1.25 pounds in our 10x12 ASC model. Finally, for our most advanced option, the Hybrid is constructed from industry-leading materials from Honeywell Spectra Shield®, Honeywell Gold Shield®, and other ballistic fabric from respected manufacturers. The exceptional quality of these materials makes for an especially capable panel. The result is an ultra-thin and ultra-light piece of soft armor at 0.25” thick, 1.04 pounds. SPECIFICATIONS Material Rimelig: p-Aramid Fibers Slim: two separate Aramid Hybrid: Honeywell Spectra Shield®, Honeywell Gold Shield®, and other ballistic fabric from respected manufacturers Protection Level II (Rimelig): 124-grain 9mm FMJ RN bullets with a velocity of 1305 ft/s (± 30 ft/s) and with 158-grain .357 Magnum Jacketed Soft Point (JSP) bullets with a velocity of 1430 ft/s (± 30 ft/s) Level IIIA (Rimelig, Slim & Hybrid): 125-grain .357 SIG FMJ flat-nose bullets with a velocity of 1470 ft/s (± 30 ft/s) and with 240-grain .44 Magnum Semi-Jacketed Hollow Point (SJHP) bullets with a velocity of 1430 ft/s (± 30 ft/s) Capability: Multi-hit protection  Dimensions (chart below) Shelf life: 5 years Manufactured: United States AR500 Armor Soft Body Armor For lightweight protection that’s easy to carry, AR500 Armor’s soft armor (specifications below) options give you the most value for the least sacrifice in affordability and stopping power.  Multiple soft armor types are available to choose from, each of which uses a different soft armor material with different weights and protection levels. However, there are similarities across each option: Every panel is either rated at Level II and Level IIIA (two handgun threat levels from the NIJ recommendations). Every soft armor panel is cut, sewn, and assembled in-house. And, like ceramic and polyethylene hard armor, these panels all have a 5-year shelf life. Our Rimelig option is made of p-Aramid Fibers and is available at both Level II and Level IIIA protection levels, which both provide multi-hit protection. The Rimelig is the most budget option of the three, making it a solid entry-level soft armor option, while still staying true to the goal of soft armor: Reliable lightweight protection, at just 0.45” thick and weighing 1.24 pounds. The next level up is the Slim, which is made of two separate Aramid laminates joined together for greater strength. The symmetrical design of our Slim armor gives it a bidirectional capability, meaning it's perfect for use in a backpack, where you might use it on your back, or in front of you as a shield (slim armor panels will still have a "strike face" label, though it will be equally effective from either side, making it perfect for use in armored backpacks or bags). It provides Level IIIA protection and is only 0.36” and 1.25 pounds in our 10x12 ASC model. Finally, for our most advanced option, the Hybrid is constructed from industry-leading materials from Honeywell Spectra Shield®, Honeywell Gold Shield®, and other ballistic fabric from respected manufacturers. The exceptional quality of these materials makes for an especially capable panel. The result is an ultra-thin and ultra-light piece of soft armor at 0.25” thick, 1.04 pounds. SPECIFICATIONS Material Rimelig: p-Aramid Fibers Slim: two separate Aramid Hybrid: Honeywell Spectra Shield®, Honeywell Gold Shield®, and other ballistic fabric from respected manufacturers Protection Level II (Rimelig): 124-grain 9mm FMJ RN bullets with a velocity of 1305 ft/s (± 30 ft/s) and with 158-grain .357 Magnum Jacketed Soft Point (JSP) bullets with a velocity of 1430 ft/s (± 30 ft/s) Level IIIA (Rimelig, Slim & Hybrid): 125-grain .357 SIG FMJ flat-nose bullets with a velocity of 1470 ft/s (± 30 ft/s) and with 240-grain .44 Magnum Semi-Jacketed Hollow Point (SJHP) bullets with a velocity of 1430 ft/s (± 30 ft/s) Capability: Multi-hit protection  Dimensions (chart below) Shelf life: 5 years Manufactured: United States Product Comparisons Body Armor Thickness (all) 10"x12" 11"x14" 11"x15" (backpack) II Rimelig 0.45" 1.24 lbs n/a n/a IIIA Rimelig 0.55" 1.43 lbs 1.75 lbs 1.95 lbs IIIA Slim 0.36" 1.25 lbs 1.54 lbs 1.76 lbs IIIA Hybrid 0.25" 1.04 lbs 1.30 lbs 1.47 lbs  

Tactical Scorpion Gear IIIA Soft Armor inserts for the Voodoo 20-0096 series Lightweight Tactical Plate Carrier vest. ( Carrier vest displayed in photos is not included) Tactical Scorpion Gear helps you take your Voodoo Tactical armor plate carrier to the next level with these level IIIA soft armor inserts custom designed to fit the Voodoo Tactical Lightweight plate carriers. This set of two soft inserts provides protection to Level IIIA NIJ standards. These inserts measure at 11" X 13" and 16" x 14" providing far more coverage than the standard 10x12 plates. Custom made by our craftsmen, our armor inserts fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates. They may be used as stand-alone level IIIA protection or behind your hard plates, adding extra protection from spalling and trauma. With a weight of approximately 2.5 pounds, they are significantly lighter than steel plates and can be comfortably worn for long periods of time. Features This is a set of matching front and back stand-alone armor panels with multiple hit capability Made in the USA Lightweight, soft, flexible, comfortable material Inserts are custom made to fit the Voodoo Tactical Lightweight Carrier vest, model number 20-0096 7/16" thick Fully tested by independent lab Rated for up to six hits from .44 magnum bullets Two panels provide both front and back protection and limited side protection Plate panel Sizes: Here at Tactical Scorpion Gear we manufacture our own vest carriers, level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Item Specifications Type: Plates Threat Level Rating: III-A Color: Black Style: Soft Body Armor Plates Model: Voodoo 20-0096 Carrier Vest Body Armor Plates

Shellback Tactical Level IIIA Model CLCIIIA Soft Armor Package The Shellback Tactical Level IIIA Model CLCIIIA Soft Armor Package is specifically designed to fit our Shellback Tactical plate carriers. This ballistic package is NIJ 0101.06 certified, lightweight and provides ballistic protection against common hand gun rounds. Available in two different configurations: plate backer set of two or cummerbund inserts set of two.  Stay protected and order the Shellback Tactical Level IIIA Model CLCIIIA Soft Armor Package today!  Specifications Plate backers - come in a set of two  Sizes Small - 8.75" Wide x 11.75" Tall  Medium - 9.5" Wide x 12.5" Tall  Size Medium fits the following  Banshee Rifle PC Banshee Elite 2.0 PC Stealth Low Viz PC Patriot PC Shield PC Skirmish PC Rampage PC Defender 2.0 Large - 10.25" Wide x 13.25" Tall  XLarge - 11" Wide x 14" Tall  Cummerbund Inserts - come in a set of two Size 13.75" Wide x 5.50" Tall Protection - Level IIIA multi hit stand alone against common handgun rounds Testing Standards - NIJ 0101.06 Certified and listed on the NIJ compliant product list   Materials - Woven Aramid fibers  Aerial Density - 1.55 PSF Thinness - .35" Protective Cover - Sonobond sealed rip stop water resistant cover  Warranty - 5 year ballistic warranty  USA Made and Berry Compliant Ballistic Protection Rounds Defeated CARTRIDGE PROJECTILE VEL (ft/s ± 30) VEL (m/s ± 9) .357 SIG (NIJ06) 125 gr FMJ 1470 448 .44 Magnum (NIJ06) 240 gr SJHP 1430 436 .357 Magnum 158 gr JSP 1430 435 .44 Magnum 240 gr SWCGC 1400 426 9 x 19 mm  Parabellum 124 gr FMJ RN 1400 426 40 S&W 180 gr FMJ 1155 352 LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.     

Caliber Armor CaliberX IIIa Soft Body Armor Panel Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density. We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing.

Level IIIA 3A Soft Body Armor Inserts for Wildcat Vest Plate Carrier Scorpion IIIA Soft Armor inserts for the Tactical Scorpion Gear Wildcat armor carrier vest. Tactical Scorpion Gear has taken the armor plate carrier to the next level. We have produced these level IIIA soft armor inserts to fit in our Wildcat series carrier vests. These inserts provide protection to Level IIIA NIJ standards. These inserts measure at 13” X 14.5” providing far more coverage than the standard 10x12 plates. They are custom made by our craftsmen to fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates. They may be used as stand alone level IIIA protection or behind your hard plates adding extra protection from spalling and trauma. With a weight of 2 pounds 11 ounces, They can be worn for long periods of time without exhaustion unlike the heavy hard plates. A stand alone armor plate with multiple hit capability Made in USA Lightweight soft flexible comfortable Material 7/16" thick Will fit our Wildcat series carrier vests Soft armor plate design Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets For front and back protection Plate panel Sizes: Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**

Tactical Scorpion Gear Level IIIA Inserts for the Muircat MOLLE Vest - IIIA Soft Armor inserts for the Tactical Scorpion Gear Muircat armor carrier vest. Tactical Scorpion Gear has taken the armor plate carrier to the next level. We have produced these level IIIA soft armor inserts to fit in our Muircat series carrier vests. These inserts provide protection to Level IIIA NIJ standards. These inserts provide full coverage for front , rear and sides providing far more coverage than the standard 10x12 plates. They are custom made by our craftsmen to fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates. They may be used as stand alone level IIIA protection or behind your hard plates adding extra protection from spalling and trauma. With a weight of 4 pounds 3 ounces, They can be worn for long periods of time without exhaustion unlike the heavy hard plates. Features A stand alone armor plate with multiple hit capability Made in USA Lightweight soft flexible comfortable Material 7/16" thick Will fit our Muircat series carrier vests Soft armor plate design Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets For front and back protection Plate panel Sizes: Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Item Specifications Protection Against: Ballistic Type: Plates & Plate Carrier Threat Level Rating: III-A

Tactical Scorpion Gear IIIA Soft Armor inserts for the Voodoo 20-9099 series Tactical Heavy Plate Carrier vest. ( Carrier vest displayed in photos is not included) Tactical Scorpion Gear helps you take your Voodoo Tactical armor plate carrier to the next level with these level IIIA soft armor inserts custom designed to fit the Voodoo Tactical Lightweight plate carriers. This set of two soft inserts provides protection to Level IIIA NIJ standards. These inserts measure at 16" X 25" and 14" x 25" providing far more coverage than the standard 10x12 plates. Custom made by our craftsmen, our armor inserts fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates. They may be used as stand-alone level IIIA protection or behind your hard plates, adding extra protection from spalling and trauma. With a weight of approximately 4.3 pounds, they are significantly lighter than steel plates and can be comfortably worn for long periods of time. Features This is a set of matching front and back stand-alone armor panels with multiple hit capability Made in the USA Lightweight, soft, flexible, comfortable material Inserts are custom made to fit the Voodoo Tactical Heavy Carrier vest, model number 20-9099 7/16" thick Fully tested by independent lab Rated for up to six hits from .44 magnum bullets Two panels provide both front and back protection and limited side protection Plate panel Sizes: Here at Tactical Scorpion Gear we manufacture our own vest carriers, level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Item Specifications Type: Plates Threat Level Rating: III-A Color: Black Style: Soft Level IIIA Body Armor Plates Model: Voodoo 20-9099 Vest Body Armor Plates

Tactical Scorpion Gear IIIA Soft Armor inserts for the Voodoo 20-0097 series Hayden Tactical Plate Carrier vest. ( Carrier vest displayed in photos is not included) Tactical Scorpion Gear helps you take your Voodoo Tactical armor plate carrier to the next level with these level IIIA soft armor inserts custom designed to fit the Voodoo Tactical Lightweight plate carriers. This set of two soft inserts provides protection to Level IIIA NIJ standards. These inserts measure at 15" X 16" providing far more coverage than the standard 10x12 plates. Custom made by our craftsmen, our armor inserts fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates. They may be used as stand-alone level IIIA protection or behind your hard plates, adding extra protection from spalling and trauma. With a weight of approximately 2.8 pounds, they are significantly lighter than steel plates and can be comfortably worn for long periods of time. Features This is a set of matching front and back stand-alone armor panels with multiple hit capability Made in the USA Lightweight, soft, flexible, comfortable material Inserts are custom made to fit the Voodoo Tactical Hayden Carrier vest, model number 20-0097 7/16" thick Fully tested by independent lab Rated for up to six hits from .44 magnum bullets Two panels provide both front and back protection and limited side protection Plate panel Sizes: Here at Tactical Scorpion Gear we manufacture our own vest carriers, level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Item Specifications Type: Plates Threat Level Rating: III-A Color: Black Style: Soft Level IIIA Body Armor Plates Model: Voodoo 20-0097 Vest Body Armor Plates