Polyethylene Body Armor

Shellback Tactical Prevail Series 10 x 12 NIJ 0101.06 Certified Level IV Hard Armor Plate Model 1155 The Shellback Tactical 1155 Level IV Hard Body Armor Plate is a single-curve ballistic rifle plate designed to withstand rigorous usage. This hard body armor plate was designed to protect the user who has their lives on the line in critical situations. By wearing Shellback Tactical 1155 Level IV Hard Body Armor Plate it will instill confidence in the user and let them know that at the end of the day they will go home to the ones they love. If you are looking for a single-curve ballistic rifle plate that was designed to instill confidence then the Shellback Tactical 1155 Level IV Hard Body Armor Plate is where your search ends. Place your order today! Specifications NIJ threat level IV NIJ 0101.06 Certified Listed on NIJ CPL List SAPI/ESAPI Cut Weight 8.2lbs Stand alone protection Single curve Single plate 10” W x 12” L X 1” D Multihit Rated  M2AP - 5 Rounds  3 Rounds Total  B32,API - 1 Round  M855A1 - 1 Round  M193 - 1 Round  Constructed of monolithic ceramic face and polyethylene backing  600 Denier water resistant cover  10 year ballistic warranty USA Made - Berry Compliant GSA and TAA Compliant  ROUNDS DEFEATED  .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP   LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

The Shellback Tactical Rampage 2.0 Active Shooter Armor Kit with Level IV 1155 Plates is your ultimate armored kit solution to being prepared for an active shooter situation. This complete kit features our popular Rampage 2.0 plates carrier and two level IV model 1155 hard armor plates. Shellback Tactical Rampage 2.0 Active Shooter Kit with Level IV 1155 Plates  The Shellback Tactical Rampage 2.0 Active Shooter Armor Kit with Level IV 1155 Plates is your ultimate armored kit solution to being prepared for an active shooter situation. This complete kit features our popular Rampage 2.0 plates carrier and two level IV model 1155 hard armor plates. Stay protected and order your Shellback Tactical Rampage 2.0 Active Shooter Kit with Level IV 1155 Plates today! KIT COMPONENTS Shellback Tactical Rampage 2.0 Plate Carrier x 1 Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2  RAMPAGE 2.0 PLATE CARRIER FEATURES Constructed of durable 500 Denier Nylon  Front and rear plate pockets hold 10" x 12" shooter or SAPI cut ballistic plates  Laser cut Molle on front, rear and cummerbund to accessorize with pouches  Laser cut Molle loop panels on front and rear for ID placards  3D Spacer mesh padding on front, rear and shoulder pads for comfort  Removable front Molle placard  Cummerbund includes six integrated pockets with bungee retention for magazines or radios Cummerbund accepts 13.75" x 5.5" soft armor inserts  Rear drag handle Heavy duty bar tacking at key stress points Fully adjustable shoulder straps to fit most sizes   Fully adjustable cummerbund to fit most sizes  Lifetime Warranty  Imported  LEVEL IV MODEL 1155 PLATE FEATURES NIJ level IV threat protection NIJ 0101.06 certified and listed on NIJ CPL list Multi-Hit Rated Single Curve 10" x 12" SAPI cut  Weight - 8.2lbs  Stand alone protection 600 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing   Made in the USA  10 Year warranty  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.

Shellback Tactical Patriot Active Shooter Kit with Level IV 1155 Plates The Shellback Tactical Patriot Active Shooter Kit with Level IV 1155 Plates is your complete ballistic solution for active shooter preparation and response. This kit provides law enforcement and first responders protection against hand gun and rifle rounds.  Kit Components Shellback Tactical Patriot Plate Carrier x 1 Shellback Tactical Prevail 1155 Level IV 10 x 12 Hard Armor Plates x 2 Patriot Plate Carrier Features  500 Denier Cordura Nylon  Lightweight adjustable space mesh shoulder pads Super lightweight - 1.5LBS  Low profile design for mobility  Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes  Loops panels on front and back for ID placards  Heavy duty par tacking at key stress points  Fits 10 x 12 shooter cut plates  GSA Compliant  TAA Compliant  Level IV 1155 Plate Features NIJ 0101.06 Certified Meets level IV standards   10" W x 12" L x 1"D Weight - 8.3lbs  SAPI Cut  Made of Monolithic ceramic and polyethylene  Made in the USA  10 Year warranty on ballistics  Stopping Power  .357 SIG FMJ 9MM .38 40S&W .45 ACP .223 BALL  5.56 X 45  7.62 X 39 BALL  7.62 X 51 M80 NATO  M855/SS109 7.62 X 63 M2AP  Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.     

Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ Ares Level IV Ceramic Body Armor - Set of Two Plates The Ares level IV ceramic body armor plate is our toughest and lightest level IV plate yet. With a boron carbide strike face and UHMWPE backer, the Ares is a military grade plate that has been laboratory tested and proven to defeat .30-06 M2AP armor piercing rounds. Boron carbide is one of the hardest materials known to man. However, it’s lighter than other softer ceramics such as aluminum oxide, which is used in most civilian grade body armor. The Ares is a superior level IV plate that is proudly manufactured in our Tucson, AZ facility. Lightweight Level IV Protection It’s no secret that speed, agility and stamina are critical during hostile engagements. While many level IV ceramic body armor plates weigh around 7 or 8 lbs per plate, the Ares weighs in at just 6.1 lbs per plate.  Not only does the Ares plate provide the operator with a clear weight advantage, but the boron carbide strike face easily destroys .30-06 M2 AP rounds upon impact. The lightweight UHMWPE backer catches the remaining bullet fragments preventing any penetration or secondary spall injury to the operator.  The Ares level IV ceramic body armor plate is the perfect choice for Law Enforcement, Security Contractors, Military, First Responders or even concerned civilians looking for advanced threat protection and safety. Full Edge-To-Edge ESAPI Protection Get what you're paying for with full edge-to-edge protection! The Ares provides maximum protection for vital organs in a full 9.5" x 12.5" medium ESAPI shooters cut profile. This allows for better protection to the operator in the event of near-edge impacts. The highly compatible ESAPI sizing gives the operator the freedom to choose from a wide range of plate carriers. The Ares features a traditional multicurve design for added comfort during extended duty use. Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ

Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA   Product Overview  True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.    Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing.   Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.    Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch      Spartan Armor Systems ® Hercules Level IV Ceramic Advanced Compound Curve Body Armor -  Set of Two Plates   Product Overview The Hercules level IV body armor plate is manufactured in-house at the Spartan Armor Systems® facility in Tucson, AZ utilizing ballistic ceramic and UHMWPE materials. As with all body armor manufactured by Spartan Armor Systems®, the Hercules level IV ceramic body armor plate has been independently tested and verified by an NIJ Certified laboratory. Each Hercules level IV body armor plate is rated to stop armor piercing rifle rounds up to .30-06 M2 AP. Weighing in at just 6.9 lbs per plate, the Hercules is noticeably lighter than most level IV ceramic body armor plates available. With full edge-to-edge 10”x12” coverage and Advanced Compound Curve design, the Hercules is ideal for operators in need of maximum protection and comfort.    Full Edge-To-Edge Protection Get what you pay for! It might not be obvious, but some 10”x12” level IV ceramic body armor plates on the market only provide protection in a 8”x10” area to keep manufacturing costs low. However, the Hercules ceramic body armor plate provides full 10”x12” edge-to-edge protection for the operator. When your life is on the line, don’t take chances with other ceramic plates that measure 10”x12”, but only provide an 8”x10” area of protection. Buy ceramic level IV body armor plates that give you the protection you’re paying for.     Advanced Compound Curve - True Multi-Curve Design The Hercules level IV body armor plate features our Advanced Compound Curve (ACC). While many body armor plates claim to be “multi-curve”, the ACC profile is a true multi-curve design providing the operator with the most comfortable fit of any ceramic level IV body armor plate. This advanced ergonomic design is especially important during extended duty engagements, typical of Law Enforcement, Security, and Military operations.   Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Ceramic & UHMWPE Plate Size: 10”x12” Protection Area: 10”x12” Weight: 6.9 lbs Thickness: 1.1” Plate Quantity: Two (2) Plates Included Curve Profile: Advanced Compound Curve Cut: SAPI/ESAPI (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Condura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ.   NOTE: Ceramic armor cannot be resold, therefore ALL sales for this product are final. No returns or exchanges accepted.

Shellback Tactical Banshee Active Shooter Kit with IV 1155 Plates The Shellback Tactical Banshee Active Shooter Kit with Level IV 1155 Plates is a cost effective solution for active shooter preparation and response.  This kit provides protection against both hand gun and rifle rounds.  Kit Components  Shellback Tactical Banshee Rifle Plate Carrier® x 1 Shellback Tactical Prevail 1155 Level IV 10 x 12 Hard Armor Plates x 2  Banshee Rifle Plate Carrier® Features  Constructed of durable 500 Denier nylon  Holds 10 x 12 shooter or SAPI cut ballistic plates  Removable cummerbund with interior and exterior PALS for side plates Cummerbund accepts 13.75" x 5.5" soft armor inserts  Quick release secondary securing system Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest. Fully adjustable and padded front, back and shoulder areas. Two areas of loop on front and rear for id placards Front pocket accepts kangaroo inserts  Heavy Duty bar tacking at key stress points Wire, antenna or hydration hose guides Low profile design for mobility  Rear drag handle  Now approved with the Los Angeles Police Department (L.A.P.D.)- NTOA (NATIONAL TACTICAL OFFICER ASSOCIATION) APPROVED Lifetime warranty  GSA and TAA Compliant  Level IV 1155 Plate Features NIJ 0101.06 Certified  10" W x 12" L x 1"D Weight - 8.3lbs  SAPI Cut  Made of Monolithic ceramic and polyethylene  Made in the USA  10 Year warranty on ballistics  Stopping Power  .357 SIG FMJ 9MM .38 40S&W .45 ACP .223 BALL  5.56 X 45  7.62 X 39 BALL  7.62 X 51 M80 NATO  M855/SS109 7.62 X 63 M2AP  LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Highlights NIJ Level III Certified AR500 Steel Construction Polyurea Coated Stand Alone 5 Year Warranty Black What’s Included 1 Level III Steel Plate Specifications 10” X 12”  Thinness: .35” Shooters Cut Weighs 7.5 lbs Full Cut Weighs 8.7 lbs Level III Steel Plate This is our Level III NIJ Certified Steel Armor Plate. Easily fitting into any of our Plate Carriers this plate is constructed of high-carbon AR500 Steel and treated with our Polyurea Blast Coating to prevent spalling. We offer two different cut options to optimize coverage and performance based on your needs. Add this plate to maximize your ballistic package! Highlights NIJ Level III Certified AR500 Steel Construction Polyurea Coated Stand Alone 5 Year Warranty Black What’s Included 1 Level III Steel Plate Specifications 10” X 12”  Thinness: .35” Shooters Cut Weighs 7.5 lbs Full Cut Weighs 8.7 lbs  

In addition to stopping the 7.62x51 M80 Ball at 2780 FPS, our PE plate has also been Special Threat tested against the following rounds: 5.56x45 M193 at 3150 FPS 7.62x39 AK-47 at 2380 FPS Highlights Peace of mind: Tested to NIJ Standard 0101.06 Level III and is multi-hit capable  Confidence: stops high-velocity military 5.56 and .30 caliber ammunition Safety: At 3.5 pounds, our PE plate is neutrally buoyant Specifications Tested to Level III threats 10”x12” plate weighs only 3.5 lbs Stand-Alone and Multi-Hit capable 1” Thick Profile Ergonomic Multiple Axis Curvature Durable polyurea coating seals out water and the elements Made in our Phoenix, Arizona, facility AR500 Armor Level III Lightweight UHMWPE Body Armor 10" x 12" There is a saying in the backpacking community, “take care of the ounces, and the pounds will take care of themselves.” When weight and mobility are everything in your body armor, the AR500 Armor® Level III ultra-high molecular weight polyethylene plate is the clear choice. Ultra-light Level III protection Our UHMWPE (aka PE) plate weighs a mere 3.5 pounds in our 10”x12” standard shooters cut. This stand-alone plate is tested to NIJ 0101.06 Level III threats and is multi-hit capable. It is manufactured in Phoenix, Arizona, and carries a 5-year shelf life. Our new PE lightweight armor plate is a great choice for those whose primary concern is weight.  In addition to stopping the 7.62x51 M80 Ball at 2780 FPS, our PE plate has also been Special Threat tested against the following rounds: 5.56x45 M193 at 3150 FPS 7.62x39 AK-47 at 2380 FPS Highlights Peace of mind: Tested to NIJ Standard 0101.06 Level III and is multi-hit capable  Confidence: stops high-velocity military 5.56 and .30 caliber ammunition Safety: At 3.5 pounds, our PE plate is neutrally buoyant Specifications Tested to Level III threats 10”x12” plate weighs only 3.5 lbs Stand-Alone and Multi-Hit capable 1” Thick Profile Ergonomic Multiple Axis Curvature Durable polyurea coating seals out water and the elements Made in our Phoenix, Arizona, facility Note: Due to its size and profile, this plate currently fits in our Testudo Gen 2.0 and AR Independence carriers only.

Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch  Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.  Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing. Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.  Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch  Ares Level IV Ceramic Body Armor - Set of Two Plates The Ares level IV ceramic body armor plate is our toughest and lightest level IV plate yet. With a boron carbide strike face and UHMWPE backer, the Ares is a military grade plate that has been laboratory tested and proven to defeat .30-06 M2AP armor piercing rounds. Boron carbide is one of the hardest materials known to man. However, it’s lighter than other softer ceramics such as aluminum oxide, which is used in most civilian grade body armor. The Ares is a superior level IV plate that is proudly manufactured in our Tucson, AZ facility. Lightweight Level IV Protection It’s no secret that speed, agility and stamina are critical during hostile engagements. While many level IV ceramic body armor plates weigh around 7 or 8 lbs per plate, the Ares weighs in at just 6.1 lbs per plate.  Not only does the Ares plate provide the operator with a clear weight advantage, but the boron carbide strike face easily destroys .30-06 M2 AP rounds upon impact. The lightweight UHMWPE backer catches the remaining bullet fragments preventing any penetration or secondary spall injury to the operator.  The Ares level IV ceramic body armor plate is the perfect choice for Law Enforcement, Security Contractors, Military, First Responders or even concerned civilians looking for advanced threat protection and safety. Full Edge-To-Edge ESAPI Protection Get what you're paying for with full edge-to-edge protection! The Ares provides maximum protection for vital organs in a full 9.5" x 12.5" medium ESAPI shooters cut profile. This allows for better protection to the operator in the event of near-edge impacts. The highly compatible ESAPI sizing gives the operator the freedom to choose from a wide range of plate carriers. The Ares features a traditional multicurve design for added comfort during extended duty use. Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ

Specifications Stand -Alone Armor System 10” X 12” 3.5 lbs/plate (10”x12”) Ultra High Molecular Weight Polyethylene (UHMWPE) Hybrid Fibers Neutrally buoyant Multi-Shot Rated 1.2” profile Our Proprietary “Encapsaloc” Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Raised and Embedded 3D Spartan Armor Systems® Logo Made in U.S.A. SPARTAN ARMOR SYSTEMS® LEVEL III ELAPHROS SET OF TWO Spartan Armor Systems® Introduces our advanced “Elaphros” (Ultra Light Weight) Level III, Multi-curve, UHMWPE Body Armor. At only 3.5 lbs per plate, this Body Armor is for those that require rifle-rated protection over extended distances without being weighed down. Elaphros lightweight body armor offers NIJ Level III (certified) threat protection at approximately half the weight of most comparable body armor plates. Elaphros body armor is neutrally buoyant and so light that it floats in water! Light, Quick, Agile “Elaphros'' in greek translates to light, quick, agile, and easy to bear. Designed for the operator that requires minimal weight and maximum maneuverability, Eleaphros body armor allows the operator a distinct advantage in a wide range of tactical engagements. Elaphros body armor is NIJ certified to meet or exceed level III requirements under NIJ 0101.06.   Master Crafted, Laboratory Tested Spartan Armor Systems® Elaphros Body Armor Plates are lab tested and certified to meet or exceed ballistic resistance under NIJ-0101.06 Level III specifications. Elaphros body armor plates offer the comfort, reliability, quality, and affordability you’ve come to expect from Spartan Armor Systems®. Constructed with Multiple ply’s of Advanced UHMWPE Hybrid Fibers, Elaphros weighs in at 3.5lbs/per plate while maintaining a sleek 1.2” low profile design that allows the operator maximum mobility and comfort with Level III protection. Our Elaphros Shooters Cut, 10”X12”, multi-curved, UHMWPE body armor was designed in-house by our dedicated team of engineers that have decades of industry experience. These UHMWPE plates were developed using only the highest quality materials, production, and quality assurance standards, providing maximum confidence and supreme coverage for our customers. Next Level Armor Elaphros (Ultra Lightweight) Level III Body Armor Plates are coated/encapsulated with Spartan Armor Systems® proprietary “Encapsaloc” Polyurea Coating. Protecting the plate from water, contaminants, and daily wear and tear. Taking great pride in every piece of armor Spartan Armor Systems® produces, the raised 3D Spartan Armor Systems® logos is a symbol of our exceptionally high-quality standards and pride. If that weren’t enough, we provide a 5-year warranty and a 5-year shelf life with our Elaphros UHMWPE Body Armor! Specifications Stand -Alone Armor System 10” X 12” 3.5 lbs/plate (10”x12”) Ultra High Molecular Weight Polyethylene (UHMWPE) Hybrid Fibers Neutrally buoyant Multi-Shot Rated 1.2” profile Our Proprietary “Encapsaloc” Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Raised and Embedded 3D Spartan Armor Systems® Logo Made in U.S.A.

Spartan Armor Systems ® Hercules Level IV Ceramic Advanced Compound Curve Body Armor -  Set of Two Plates Product Overview The Hercules level IV body armor plate is manufactured in-house at the Spartan Armor Systems® facility in Tucson, AZ utilizing ballistic ceramic and UHMWPE materials. As with all body armor manufactured by Spartan Armor Systems®, the Hercules level IV ceramic body armor plate has been independently tested and verified by an NIJ Certified laboratory. Each Hercules level IV body armor plate is rated to stop armor piercing rifle rounds up to .30-06 M2 AP. Weighing in at just 6.9 lbs per plate, the Hercules is noticeably lighter than most level IV ceramic body armor plates available. With full edge-to-edge 10”x12” coverage and Advanced Compound Curve design, the Hercules is ideal for operators in need of maximum protection and comfort.  Full Edge-To-Edge Protection Get what you pay for! It might not be obvious, but some 10”x12” level IV ceramic body armor plates on the market only provide protection in a 8”x10” area to keep manufacturing costs low. However, the Hercules ceramic body armor plate provides full 10”x12” edge-to-edge protection for the operator. When your life is on the line, don’t take chances with other ceramic plates that measure 10”x12”, but only provide an 8”x10” area of protection. Buy ceramic level IV body armor plates that give you the protection you’re paying for.   Advanced Compound Curve - True Multi-Curve Design The Hercules level IV body armor plate features our Advanced Compound Curve (ACC). While many body armor plates claim to be “multi-curve”, the ACC profile is a true multi-curve design providing the operator with the most comfortable fit of any ceramic level IV body armor plate. This advanced ergonomic design is especially important during extended duty engagements, typical of Law Enforcement, Security, and Military operations. Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Ceramic & UHMWPE Plate Size: 10”x12” Protection Area: 10”x12” Weight: 6.9 lbs Thickness: 1.1” Plate Quantity: Two (2) Plates Included Curve Profile: Advanced Compound Curve Cut: SAPI/ESAPI (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Condura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ.   NOTE: Ceramic armor cannot be resold, therefore ALL sales for this product are final. No returns or exchanges accepted.

Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA Predator Armor Level III+ Shooters Cut Predator Armor Level III+ Body Armor is manufactured in the U.S. using ballistic grade steel and has the option for a kevlar lined spall and fragmentation protective layer. Our plates use a unique heat-treating, quenching and tempering process that results in an extra hardened steel. Predator Armor plates are lightweight, impact-resistant steel that hold superior ballistic properties. This allows us to use thinner plates without sacrificing protection levels. All of our plates come with a base coat that aesthetically enhances the plate as well as provides durable characteristics. This coating does not provide fragmentation mitigation. You have the option to add kevlar lining to your plate. This provides anti spall and frag characteristics. It also enhances the performance of your plate. If your carrier does not have anti frag characteristics it is strongly advised to include the kevlar lining. Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA

Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA Predator Armor Level III Shooters Cut Predator Armor Level III Body Armor is manufactured in the U.S. using ballistic grade steel and has the option for a kevlar lined spall and fragmentation protective layer. Our plates use a unique heat-treating, quenching and tempering process that results in an extra hardened steel. Predator Armor plates are lightweight, impact-resistant steel that hold superior ballistic properties. This allows us to use thinner plates without sacrificing protection levels.  Our ballistic steel plate is tested to NIJ standards. All of our plates come with a base coat that aesthetically enhances the plate as well as provides durable characteristics. This coating does not provide fragmentation mitigation. You have the option to add kevlar lining to your plate. This provides anti spall and frag characteristics. It also enhances the performance of your plate. If your carrier does not have anti frag characteristics it is strongly advised to include the kevlar lining. Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA Our Testing Target is a smaller cut from the same material as the Level III Plates. It is an add on item you can order with your plates and test the body armor out for yourself. We guarantee our plates will meet the Level III standards. Add a test plate to your order and try it yourself. If it does not meet the standards we will refund your order.

The Shellback Tactical Skirmish Active Shooter Armor Kit with Level IV 1155 Plates is tactical armored kit solution to being prepared for an active shooter situation. This complete kit features the Skirmish Plate Carrier and two level IV model 1155 hard armor plates. Shellback Tactical Skirmish Active Shooter Kit with Level IV 1155 Plates Kit Components Shellback Tactical Skirmish Plate Carrier x 1 Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2  Skirmish Plate Carrier Features 500 Denier Nylon Low profile design for mobility 3D Spacer mesh padding for comfort Front kangaroo pouch Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes Heavy duty par tacking at key stress points  Fits 10 x 12 shooter cut plates  Lifetime Warranty Imported Level IV Model 1155 Plate Features NIJ level IV threat protection NIJ 0101.06 certified and listed on NIJ CPL list Multi-Hit Rated Single Curve 10" x 12" SAPI cut  Weight - 8.2lbs  Stand alone protection 600 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing   Made in the USA  10 Year warranty  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 1155 Plates   The Shellback Tactical Defender 2.0 Active Shooter Armor Kit with Level IV 1155 Plates is your complete armored kit answer to being prepared for an active shooter situation. This complete kit is packed with features - Fully adjustable lightweight carrier, two model 1155 level IV armor plates and a convenient carry bag for storage. Stay protected and order your Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 1155 Plates today!  Kit Components Shellback Tactical Defender 2.0 Plate Carrier x 1  Shellback Tactical Kit Carrying Bag x 1 Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2  Defender 2.0 Plate Carrier Features Constructed of durable 500 denier Nylon  Holds 10 x 12 shooter cut plates Lightweight laser cut molle  Fully adjustable side straps and shoulders One size fits most  Integrated padded shoulder pads for comfort Front and back molle loop panels for placards and patches Two integrated kangaroo M4 magazine pouches with bungee retention One integrated tourniquet pouch marked with a red tab for easy identification Drag handle on the rear Lifetime warranty  Imported Kit Carrying Bag Constructed of 500 denier nylon Bag will hold Shellback Defender 2.0 Plate Carrier, plates and magazines Two carrying straps Loop panels for hook placard and patches Zipper closure Lifetime warranty Imported LEVEL IV MODEL 1155 PLATE FEATURES NIJ level IV threat protection NIJ 0101.06 certified and listed on NIJ CPL list Multi-Hit Rated Single Curve 10" x 12" SAPI cut  Weight - 8.2lbs  Stand alone protection 600 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing   Made in the USA  10 Year warranty  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

SPECIFICATIONS Protection: .357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1 g (125 gr) and a velocity of 1470 ft/s (+/- 30 ft/s) and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6 g Dimensions: Size: Small/Medium: ~20.5in - 22.4in (52-57cm) Thickness: 0.3" (8mm) Manufactured: United States AR500 Armor The Protector Helmet If you’re looking for a lightweight, affordable ACH-style helmet, then take a look at the AR500 Armor® Protector helmet. Level IIIA protection, modern materials The Protector is an NIJ 0106.01 Level IIIA-compliant helmet rated for 9mm and .44 magnum threats. It is fitted with a fully adjustable and removable 4-point harness and the adjustable chin strap with side release buckle closure provides ultimate ease and comfort.  Constructed from high-strength composite materials, the Protector is lightweight (S/M is 2.7 pounds),  this helmet is finished with a matt/textured PU paint with a low IR signature. Comes with a nylon carry bag. Designed to defeat 95% of ammunition used in shooting incidents. SPECIFICATIONS Protection: .357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1 g (125 gr) and a velocity of 1470 ft/s (+/- 30 ft/s) and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6 g Dimensions: Size: Small/Medium: ~20.5in - 22.4in (52-57cm) Thickness: 0.3" (8mm) Manufactured: United States

SPECIFICATIONS Material: Polycarbonate frames & triacetate cellulose (TAC) polarized lenses Protection: block 100% of harmful UV rays and meet ANSI Z87.1 impact resistance standards AR500 Shooting Glasses If you’re looking for tactical shades that are both stylish and affordable, look no further. Fashionable affordable eye protection Our Shooting Glasses are designed for both fashion and function. With 1.1mm Triacetate Cellulose (TAC) polarized lenses, our shooting glasses offer superior visual clarity and block out 100% of all harmful UVA, UVB, and UVC rays, up to 400 nanometers. The hard-coated, scratch-resistant lenses are lightweight and impact-resistant and meet all ANSI Z87.1 standards. The polycarbonate frames have more than four times the impact resistance of fiberglass and have a tensile strength of 900 pounds per square inch (compared to fiberglass at 200 psi). Our Shooting glasses come with a zippered case and microfiber cleaning cloth. SPECIFICATIONS Material: Polycarbonate frames & triacetate cellulose (TAC) polarized lenses Protection: block 100% of harmful UV rays and meet ANSI Z87.1 impact resistance standards

Highlights NIJ Certified Level III+ Made with Ceramic and UHMWPE Materials User-Friendly Design Stress Fracture Resistant Fully Sealed Stand Alone Single Curve What’s Included 1 Level III+ Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 4.3 Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs Level III+ Lightweight Poly Plate This is our lightweight and durable Ultra High Molecular Weight Polyethylene (UHMWPE), NIJ Certified Level III+ Single Curve Plate. Made with UHMWPE fabrics, ceramics and special pressing techniques the single curve design fits to the body for maximum safety and comfort for a lighter, thinner, high performing plate. Rugged, reliable, and stress fracture resistant our plates are also fully sealed with Polyurea to protect against liquids, chemicals and harsh elements. Highlights NIJ Certified Level III+ Made with Ceramic and UHMWPE Materials User-Friendly Design Stress Fracture Resistant Fully Sealed Stand Alone Single Curve What’s Included 1 Level III+ Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 4.3 Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs

Highlights NIJ Certified Level III UHMWPE Material Construction Fully Sealed Stand Alone Multi Curve Stress Fracture Resistant Light Weight User Friendly Design Special Threat Performance 7.62 x 39mm, 123gr, FMJ 5.56 x 45mm, 55gr M193 Ball Whats Included 1 Level III Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 3.2 Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs Level III Lightweight Poly Plate This is our Level III Polyethylene Plate. This stand alone Ultra High Molecular Weight Polyethylene (UHMWPE) Plate is lightweight, durable, and easily fits into our plate carriers and vests. The Multi Curve design fits to the contours of the body for maximum safety and comfort while maintaining peak performance in the field. This ultra light weight plate is  meant to increase your ballistic coverage with out weighing you down! Highlights NIJ Certified Level III UHMWPE Material Construction Fully Sealed Stand Alone Multi Curve Stress Fracture Resistant Light Weight User Friendly Design Special Threat Performance 7.62 x 39mm, 123gr, FMJ 5.56 x 45mm, 55gr M193 Ball Whats Included 1 Level III Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 3.2 Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs

Highlights IIIA+ ICW our Soft Armor Inserts 100% Polyethylene Construction Increased Protection Concealable Black Special Threat Performance 5.7mm x 28MM, 27gr. (SS195) 5.7mm x 28MM 40gr. (HORNADY BLUE TIP) .357 SIG 115gr. (JHP) .357 SIG 125gr. (GDHP) 9mm FIOCCHI 115gr. FMJ 9mm WINCHESTER RANGER 127gr. (SXT) .40 CAL 95gr. (HP) 7.62mm x 25mm TOKAREV NORINCO 85gr. FMJ 7.62mm x 25mm TOKAREV FOREIGN 85gr. FMJ 7.62mm x 25mm TOKAREV S&B 85gr. What’s Included 1 Special Threat Insert Level IIIA+ Special Threat Insert Plate This is our ultra thin IIIA+ SPECIAL THREAT PLATE designed to be worn in the chest pocket of our Freedom Concealable Vests. This plate weighs less than two pounds and is made of 100% polyethylene. This Special Threat plate is certified to withstand multiple hits from an array of unconventional rounds. Adding this Special Threat Plate In Conjunction With with our Certified Level IIIA ballistics upgrades your armor to a Level IIIA+. Highlights IIIA+ ICW our Soft Armor Inserts 100% Polyethylene Construction Increased Protection Concealable Black Special Threat Performance 5.7mm x 28MM, 27gr. (SS195) 5.7mm x 28MM 40gr. (HORNADY BLUE TIP) .357 SIG 115gr. (JHP) .357 SIG 125gr. (GDHP) 9mm FIOCCHI 115gr. FMJ 9mm WINCHESTER RANGER 127gr. (SXT) .40 CAL 95gr. (HP) 7.62mm x 25mm TOKAREV NORINCO 85gr. FMJ 7.62mm x 25mm TOKAREV FOREIGN 85gr. FMJ 7.62mm x 25mm TOKAREV S&B 85gr. What’s Included 1 Special Threat Insert

Highlights NIJ Certified Level III+ Made with Ceramic and UHMWPE Materials User-Friendly Design Stress Fracture Resistant Fully Sealed Single Curve Stand Alone Black Special Threat Performance 5.56 x 45mm, 55gr M193 Ball 5.56 x 45mm, 62gr, M855 Green Tip 7.62 x 39mm, 123gr, MSC 7.62 x 39mm 121gr BZ API 7.62 x 54Rmm 148gr LPS What’s Included 2 Polyethylene Side Plates  Side Plates Lightweight Poly Set of 2 Our Polyethylene Side Armor Plates easily fit into our Advanced Plate Carrier with Cummerbund as well as numerous other plate carriers utilizing a cummerbund for additional side coverage. These Polyethylene Plates are NIJ Certified Level III and perform at Level III+. We offer two different single curve size options to optimize side coverage based on your needs. Maximize the potential of your Plate Carrier with our Polyethylene Side Plates. Highlights NIJ Certified Level III+ Made with Ceramic and UHMWPE Materials User-Friendly Design Stress Fracture Resistant Fully Sealed Single Curve Stand Alone Black Special Threat Performance 5.56 x 45mm, 55gr M193 Ball 5.56 x 45mm, 62gr, M855 Green Tip 7.62 x 39mm, 123gr, MSC 7.62 x 39mm 121gr BZ API 7.62 x 54Rmm 148gr LPS What’s Included 2 Polyethylene Side Plates 

Features of Level III ICW Lightweight Plate Made with UHMWPE fabrics and special pressing techniques to create a lighter and thinner plate NIJ 0101.06 Level III In-Conjunction with Level IIIA Light Soft Armor Multi Curve design fits to the contours of the body for maximum safety and comfort Rugged, reliable, and stress fracture resistant Fully sealed with Polyurea to protect against liquids, chemicals and harsh elements Special Threats: 7.62 x 39mm, PS Ball (MSC) 5.56 x 45mm, 55gr M193 Ball Specifications: NIJ Level III ICW IIIA Multi Curve Size 10” x 12” Weight (lbs): 2.4 Thickness: (in): 0.60 Tolerences: +/_ .25” - +/_ 0.25 lbs WHAT IS INCLUDED: 1 Qty. Level III ICW Plate Level III ICW Lightweight Plate Introducing our Lightweight and Durable Ultra High Molecular Weight Polyethylene (UHMWPE), NIJ 0101.06 Level III In-Conjunction with IIIA, Multi Curve plate. Features of Level III ICW Lightweight Plate Made with UHMWPE fabrics and special pressing techniques to create a lighter and thinner plate NIJ 0101.06 Level III In-Conjunction with Level IIIA Light Soft Armor Multi Curve design fits to the contours of the body for maximum safety and comfort Rugged, reliable, and stress fracture resistant Fully sealed with Polyurea to protect against liquids, chemicals and harsh elements Special Threats: 7.62 x 39mm, PS Ball (MSC) 5.56 x 45mm, 55gr M193 Ball Specifications: NIJ Level III ICW IIIA Multi Curve Size 10” x 12” Weight (lbs): 2.4 Thickness: (in): 0.60 Tolerences: +/_ .25” - +/_ 0.25 lbs WHAT IS INCLUDED: 1 Qty. Level III ICW Plate

Highlights Made with UHMWPE fabrics and special pressingtechniques to create a lighter and thinner plate NIJ 0101.06 Certified Level III User-friendly design fits to the contours of the body for maximum safety and comfort Rugged, reliable, and stress fracture resistant Fully sealed with polyurea to protect against the hard elements Special Threat Performance 7.62 x 51 M80 (NIJ III) 7.62 x 39 PS BALL (MSC) 5.56 x 45 M855 (GREEN TIP) Whats Included 1 Level III Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 4.8lbs Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs Level III+ Lightweight Poly Plate Limited Edition This is our Limited Edition Level III Polyethylene Plate that is sealed with Polyurea. This Polyurea is a Limited Edition application to our Poly plates. This stand alone Ultra High Molecular Weight Polyethylene (UHMWPE) Plate is lightweight, durable, and easily fits into our plate carriers and vests. The Multi Curve design fits to the contours of the body for maximum safety and comfort while maintaining peak performance in the field. This ultra light weight plate is  meant to increase your ballistic coverage with out weighing you down! Highlights Made with UHMWPE fabrics and special pressingtechniques to create a lighter and thinner plate NIJ 0101.06 Certified Level III User-friendly design fits to the contours of the body for maximum safety and comfort Rugged, reliable, and stress fracture resistant Fully sealed with polyurea to protect against the hard elements Special Threat Performance 7.62 x 51 M80 (NIJ III) 7.62 x 39 PS BALL (MSC) 5.56 x 45 M855 (GREEN TIP) Whats Included 1 Level III Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 4.8lbs Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs

Specifications: Includes 2 Plates NIJ Certified Level III 9.5"x12.5" 4.8 lbs 1.1" thick Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Ballistic Threats Tested:  7.62x39mm M67 (FMJ Ball) 7.62x39mm M43 (MSC) 7.62x51mm (M-80 Ball) 5.56x45mm (M193 Ball) 5.56x45mm (M855/SS109) Spartan Armor Systems Level III+ Composite/Ceramic Multi Curve 10"x12" Set of Two At only 4.8 lbs this is our lightest level III+ body armor plate we've ever offered. This stand-alone composite/ceramic body armor is multi-hit rated and special threat validated against high velocity rounds such as SS109/M855. The combination of multi curve design and light weight makes this armor comfortable and easy to wear for for extended periods of time. Each plate measures 9.5"x12.5" inches and is only 1.1" inches thick  Specifications: Includes 2 Plates NIJ Certified Level III 9.5"x12.5" 4.8 lbs 1.1" thick Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Ballistic Threats Tested:  7.62x39mm M67 (FMJ Ball) 7.62x39mm M43 (MSC) 7.62x51mm (M-80 Ball) 5.56x45mm (M193 Ball) 5.56x45mm (M855/SS109) Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited. The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.