Plate Carriers with Plates

Proudly Made in the U.S.A: Guarantees adherence to the highest manufacturing standards, reinforcing the commitment to quality. Lifetime Warranty: Offers peace of mind and assurance of a product that stands by its quality and durability.  Level IV 4S17 Hard Armor Plates: With NIJ Level IV certification, DEA compliance, and 100% Berry Compliant, these plates offer unparalleled ballistic protection, providing the highest level of safety against multiple high-powered rounds. Constructed from Heavy-duty 500 D CORDURA® Nylon: Ensures durability and long-lasting wear, even in the most challenging environments, which increases the lifespan of the product and reliability in demanding situations. Laser-cut MOLLE: Allows seamless integration of additional pouches or gear, offering versatility to customize the carrier according to mission-specific needs. CATEGORY ARMOR SPEC NIJ Threat Level Level IV Certification NIJ 0101.06 Certified Special Threat ------------- Protection Type Stand Alone     Construction Alumina ceramic & composite Exterior Cover 1000 Denier Cordura nylon     Size Nominal 9.5" x 11.5" Thickness .95" Weight 7.2 lbs Cut Shooter cut Curvature Single curve     Spall Protection Yes Multi-Hit Protection Yes Protective Area Edge to Edge Warranty 10 Years Country of Origin USA Experience the ultimate in safety and operational effectiveness with the Shellback Tactical Rampage 2.0 Active Shooter Kit featuring Level IV 4S17 Plates. Designed for dynamic scenarios, this top-of-the-line kit delivers unmatched protection while offering convenient storage for essential gear. The core of this kit is the heavy-duty Rampage 2.0 Plate Carrier. Constructed from 500 D CORDURA® nylon, it's built to withstand demanding environments. Its laser-cut MOLLE enables seamless integration of pouches and tools, while the cummerbund's six bungee retention pockets offer versatile storage for magazines, radios, and more. What sets this kit apart is the included Shellback Tactical Prevail Series Model 4S17 Level IV Hard Armor Plates. These plates are not only NIJ Level IV certified and DEA compliant but are also 100% Berry Compliant, underscoring an uncompromising commitment to quality and adherence to rigorous standards. These U.S.A-made plates offer critical protection against multiple high-powered rounds. To enhance user comfort, the carrier features 3D Spacer mesh padding, fully adjustable shoulder straps, and a customizable cummerbund. The plate carrier also comes with a removable front MOLLE placard and a practical rear drag handle for rapid extraction. Defend, protect, and prevail with the Shellback Tactical Rampage 2.0 Active Shooter Kit, offering unmatched reliability when it matters most. Rampage 2.0 Plate Carrier Features Constructed of durable 500 Denier Nylon  Front and rear plate pockets hold 10" x 12" shooter or SAPI cut ballistic plates  Laser cut Molle on front, rear and cummerbund to accessorize with pouches  Laser cut Molle loop panels on front and rear for ID placards  3D Spacer mesh padding on front, rear and shoulder pads for comfort  Removable front Molle placard  Cummerbund includes six integrated pockets with bungee retention for magazines or radios Cummerbund accepts 13.75" x 5.5" soft armor inserts  Rear drag handle Heavy duty bar tacking at key stress points Fully adjustable shoulder straps to fit most sizes   Fully adjustable cummerbund to fit most sizes  Lifetime Warranty  Imported  Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" 1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Armor Rating Ammo Type Hit Rating Multi-hit Rated M2AP 3 Rounds Multi-hit Rated M80 Ball, Steel 3 Rounds Multi-hit Rated M43 MSC PS 3 Rounds Multi-hit Rated M855 Ball 3 Rounds Multi-hit Rated 223 REM 3 Rounds Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

American Craftsmanship: Each AR550 Steel Body Armor Panel is proudly made in the U.S.A., ensuring an unmatched standard of quality that resonates with the patriotic spirit of our defenders. Elite Protection: NIJ STD-0101.06 Level III compliant and ready to combat special threats listed under NIJ STD-0101.07 Draft RF2 – offering peace of mind in the most unpredictable situations. Ergonomic Excellence: A unique multi-curve design, molded in one bend, ensures comfort and mobility without compromising on protection, empowering our heroes to move swiftly and securely. Shooters Cut Advantage: Strategically designed to shed extra weight but shield the most critical zones, ensuring agility in high-pressure situations. Unyielding Defense: The AR550 Level III+ Steel Body Armor & MOPC Gen II Package Enter the arena of life with the confidence that only world-class protection can provide. Designed for those who are the shield against adversities – police officers, military personnel, private security, and tactical gear enthusiasts – this armor is the embodiment of strength and safety. 🛡 Forge of Excellence: Each AR550 Steel Body Armor Panel stands as a testament to American craftsmanship. With its foundation in the USA, its quality, precision, and performance remain unmatched. 🛡 Maximum Protection, No Compromise: Experience a protection level that surpasses the norm. This armor is not only compliant with NIJ STD-0101.06 Level III but also faces the challenges posed by special threats under NIJ STD-0101.07 Draft RF2. From standard threats to special ones like M855 rounds, this armor has your back. 🛡 Ergonomic Mastery: Comfort doesn’t take a back seat. With a multi-curve design molded in a single bend process, it ensures less strain and a snug fit. This innovative design mimics the precision of multi-curve ceramic armor, ensuring you feel secure without compromising on comfort. 🛡 Shooters Cut - Agile and Efficient: Shedding extra weight but shielding essential zones, the Shooters Cut design maximizes mobility while ensuring your vital organs remain protected. 🛡 Guarded Against Nature and Fragmentation: The powder-coated finish keeps elements at bay, ensuring your armor's longevity. When it comes to shrapnel, team it up with the Caliber Anti-Spall add-on. Crafted in collaboration with Bullet Liner®, this specialized coating acts as an extra layer, safeguarding you from potential fragmentation. 🛡 MOPC Gen II - Tactical Brilliance: Chosen by countless law enforcement officers, the Modular Operator Plate Carrier (MOPC) Gen II stands tall in adaptability. MOLLE webbing ensures modular attachment, and the breathable 3D Mesh liner keeps ventilation in check. Whether you choose the full cummerbund or scale it down with the internal waist strap, flexibility remains at its core. Available in various shades, this carrier seamlessly integrates with Caliber Armor AR550 Steel Body Armor Plates, presenting options for side protection. Let every challenge know you're equipped with the best, ready to face whatever comes your way. With this package, you're not just buying armor; you're investing in unwavering confidence, superior safety, and an emblem of commitment to excellence. Stay guarded, stay ahead. Weights for AR550 Steel Body Armor: 10 x 12 – 8lb 13 oz with Anti-Spall Coating NIJ STANDARD-0101.06 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 Level III and also special threats tested included in the draft NIJ Standard- 0101.07 RF2. MANUFACTURING TOLERANCES: Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%. Cummerbund Size: Adjustable from 40″ – 48″ (measure around your navel) Accepts Caliber Armor AR550 Steel Plates in 10″ x 12″ and 11″x 14″ or any other ESAPI sizes up to 10.25″ x 13.25 Side plate capacity compatible with our CaliberX IIIA soft armor. This is a great option for side protection for a fraction of the weight. Available in:OD GreenBlackCoyote BrownScorpion OCP

Made in the USA: This Tactical Scorpion Gear Level IIIA Concealable Ballistic Shirt is proudly made in the USA by dedicated craftsmen, ensuring premium quality, supporting local jobs, and delivering a product you can trust. Level IIIA NIJ Compliance: Stay cool & calm under fire knowing your gear has full Level IIIA compliance, even exceeding the latest US NIJ 0101.06 standards.  Superior Protection: The uniquely shaped soft aramid plates provide comprehensive front and back protection, going above and beyond the coverage of standard 10x12 plates. An armor you can rely on when situations escalate. Resilient Material: The shirt not only offers bulletproof features but also stands firm against corrosion and exhibits excellent performance in low temperatures, a robust companion in any environment. Breathable Spandex Blend: Crafted from a special spandex blend, this shirt assures comfort and breathability. It stretches to offer a snug fit, becoming virtually unnoticeable, ensuring maximum mobility during high-stakes situations.- Level IIIA Soft Armor Panels Included Introducing the Tactical Scorpion Gear Level IIIA Concealable Ballistic Shirt (TSG-014), an exceptional fusion of protection and discretion. Expertly crafted by their dedicated American artisans, this shirt is designed to safeguard front and back with uniquely shaped, soft aramid plates, delivering more coverage than standard 10x12 plates. Proudly made in the USA, this gear goes beyond expectation with full Level IIIA compliance, exceeding the latest US NIJ 0101.06 standards. Not only will this shirt provide resistance against six pistol rounds up to .44 Mag HP at 1430 fps at 5 meters, but it also displays unparalleled resilience against corrosion and impressive performance in low temperatures.Crafted from a special spandex blend, this shirt ensures breathability and a snug fit, making it nearly undetectable under your clothing. Removable inner armor plates make this shirt as practical as it is protective, allowing for easy care and washing.The Tactical Scorpion Gear Level IIIA Concealable Ballistic Shirt is more than just a piece of armor – it's a silent companion, unnoticeable but ever-present, offering optimal protection against unforeseen threats. Experience the assurance of American-made, NIJ-compliant armor designed with precision and care. Stay one step ahead with Tactical Scorpion Gear.                            TSG-014   Panel Size  Front Panel L x W & Length From Neck Down  Back Panel L x W   Medium            11” x 12.75” (11.5” at neck)  10” x 14.5”   Large            12” x 13” (11.5” at neck)  11” x 14.5”  Xlarge           12 5/8” x 14.5” (13” at neck)                         12” x 15”  ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NIJ tested Level IIIA Armor will defeat 6 pistol round shots up to .44 Mag HP – 1430 fps at 5 meters Protection Level Testing Bullets Weight of Bullet Speed of Bullet Shot Distance Effective Shots I .380ACP FMJ RN 6.2/95 322/1055 5m 6 .22 LRHV Lead 2.6/40 329/1080 5m 6 II A 40S&W FMJ 11.7/180 322/1055 5m 6 9MM FMJ RN 8.0/124 341/120 5m 6 II A .357 Mag JSP 10.2/158 436/1430 5m 6 .9mm FMJ RN 8.0/124 367/1205 5m 6 IIIA .44 Mag HP 8.0/124 436/1430 5m 6 9MM FMJ RN 15.6/240 436/1430 5m 6 III 7.62mm NATO M80 FMJ 9.6/148 838/2780 15m 6 IV 7.62mm Caliber M2 AP 1.8/166 869/2880 15m 1

Proudly American Craftsmanship: A symbol of unparalleled safety and excellence, ensuring frontline heroes carry a promise of premium protection. NIJ Standard-0101.06 Certification: Tested to not just meet, but exceed rigorous ballistic resistance standards for ultimate peace of mind. Innovative One-Step Multi-Curve Design: A groundbreaking approach ensuring uncompromised wearability without the usual strain on plate integrity. Nationally Celebrated Choice: Trusted by law enforcement nationwide, it's more than gear; it's a badge of unmatched safety. Caliber Armor AR550 Level III+ Body Armor With Spall Coat Experience a HIGHER CALIBER of protection with the Caliber Armor AR550 Level III+ Body Armor. Born from years of meticulous craftsmanship and innovation, this armor showcases American excellence, ensuring you wear not just armor, but a promise of unparalleled safety. Every inch of this AR550 steel body armor echoes protection that withstands even the formidable M855 rounds. Its unique one-step multi-curve design, a brainchild of feedback from the frontline's bravest, promises wearability without compromise. What sets it apart? While most multi-curve designs strain and weaken plates through multiple bends, Caliber Armor's innovative one-bend process ensures the armor's integrity, drawing inspiration from the best in multi-curve ceramic armor. But it's not just about the steel. The signature Shooters Cut trimmings shave off weight yet shield vital organs with precision. And while the armor stands robust against nature's whims, the true hero is the game-changing Bullet Liner® Anti-Spall Coating. Crafted in collaboration with Bullet Liner®, it's more than just a coating; it's a guardian against lethal shrapnel, offering an added layer of confidence in the face of adversity. Carry the weight of assurance, not burden, with the AR550 – an emblem of resilience, innovation, and unmatched protection. For those who stand fearless in the face of danger, this isn't just armor; it's a wearable testament to valor. Stand tall. Stand protected. Stand with Caliber Armor. Weights for AR550 Steel Body Armor: 10 x 12 – 8lb 7 oz with Anti-Spall Coating NIJ STANDARD-0101.06 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 Level III and also tested for special threats listed on the new draft NIJ Standard- 0101.07 RF2. MANUFACTURING TOLERANCES: Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%. Modular Operator Plate Carrier (MOPC) Gen II Experience unbeatable protection on the frontline with the Modular Operator Plate Carrier (MOPC) Gen II by Condor Outdoor, handpicked by Caliber Armor for those who demand only the best. This plate carrier, celebrated nationwide and trusted by law enforcement, isn't just equipment; it's a shield of valor. Embrace unparalleled modularity as MOLLE webbing envelopes all sides, ready to tailor to your mission needs and ensuring peak operational mobility. Whether you opt for the revered Caliber Armor AR550 Steel Body Armor Plates, or any other ESAPI sizes, this carrier ensures a snug fit, amplifying protection. But here's the clincher: Adaptability. Whether you’re gearing up for intense operations or scaling down, the choice between a full cummerbund or an internal waist strap offers flexibility without compromise. And every detail – from the emergency drag handle to the breathable 3D Mesh liner – speaks of a design that’s centered on the user's safety and comfort. Unveil your tactical prowess in a selection of finishes, from the commanding Black Multi-Cam to the resilient Scorpion OCP. This isn't just another plate carrier. It's a testament to unwavering strength, designed for those who stand on the thin line between order and chaos. Choose the MOPC Gen II and wear your armor with pride. Accepts Caliber Armor AR550 Steel Plates in 10″ x 12″ and 11″x 14″ or any other ESAPI sizes up to 10.25″ x 13.25 Available in:OD GreenBlackCoyote BrownScorpion OCPBlack Multi-Cam

Kit Components  Shellback Tactical Banshee Elite Plate Carrier x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Banshee Elite 2.0 Plate Carrier Features  Constructed of durable 500 denier nylon Plate pockets load from the bottom and hold 10 x 12 plates  Integrated zipper admin pouch located on chest  Extreme versatility with PALS webbing covering the front, back and shoulders of the vest 3D Mesh padding for comfort and allows air flow to keep you cool  Hypalon shoulder straps for radio wires and hydration tubes  Rear drag handle lays flat and secures with hook and loop Heavy duty bar tacking at key stress points for durability Quick release buckles on shoulders for quick on and off access  Removable cummerbund with interior and exterior PALS for side plate pocket attachment Cummerbund includes 6 integrated pockets with bungee retention for magazines or radios Cummerbund accepts 13.75" x 5.5" soft armor inserts  Carrier is fully adjustable at cummerbund and shoulder straps to fit all body types Built in rear hydration pocket accepts most common bladders Integrated nylon vertical strips to accommodate QASM buckles Two areas of loop on front and rear for id placards GSA and TAA compliant Lifetime Warranty  Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Shellback Tactical Banshee Elite 2.0 Active Shooter Kit with Level IV 4S17 Plates The Shellback Tactical Banshee Elite 2.0 Active Shooter Kit with Level IV 4S17 Plates is a superior solution for active shooter preparation and response.  This kit provides first responders protection against hand gun and rifle rounds.   Kit Components  Shellback Tactical Banshee Elite Plate Carrier x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Banshee Elite 2.0 Plate Carrier Features  Constructed of durable 500 denier nylon Plate pockets load from the bottom and hold 10 x 12 plates  Integrated zipper admin pouch located on chest  Extreme versatility with PALS webbing covering the front, back and shoulders of the vest 3D Mesh padding for comfort and allows air flow to keep you cool  Hypalon shoulder straps for radio wires and hydration tubes  Rear drag handle lays flat and secures with hook and loop Heavy duty bar tacking at key stress points for durability Quick release buckles on shoulders for quick on and off access  Removable cummerbund with interior and exterior PALS for side plate pocket attachment Cummerbund includes 6 integrated pockets with bungee retention for magazines or radios Cummerbund accepts 13.75" x 5.5" soft armor inserts  Carrier is fully adjustable at cummerbund and shoulder straps to fit all body types Built in rear hydration pocket accepts most common bladders Integrated nylon vertical strips to accommodate QASM buckles Two areas of loop on front and rear for id placards GSA and TAA compliant Lifetime Warranty  Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.   

Spartan Armor Systems AR550 Level III+ Armor with Achilles Laser Cut Plate Carrier Package includes: Front and Back AR550 shooters cut steel armor plates. Two 6x6 side plates. Achilles Laser Cut Plate Carrier in your choice of Black, Coyote Brown, or OD Green.  You have the option to upgrade to the ATC™ Advanced Triple Curve and Full Coat for fragmentation mitigation. Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.  Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.  Achilles Plate Carrier Specs: 1000 Denier Materials Light weight and Duty 1000 Denier laser Cut Molle Zippered Admin Pouch Kangaroo pouch with removable triple M4 Pouches Padded Shoulder Pads Padded Front and rear with ventilation vents Low Profile Drag Handle Molle Velcro front and rear for Identifier Patches 2-inch replaceable quick release buckles Accepts 10X12 and 11x14 Body Armor 6x6 or 6x8 Side Plates Fits S to XL Buy Body Armor - Level III+ Spartan AR550 Armor We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor!  With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated! Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our  ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming. Advanced Triple Curve (ATC) AR550 Spartan Body Armor. An industry FIRST! Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Level III+ Side Plates:   Choose from either 6″ x 6″ (small) or 6″ x 8″ (large) Chest Plate Weight (per plate):   10x12 AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz. Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6oz (base coat), 3lbs 12oz (full coat). Thickness:   .25″ AR550 plus approximately .25″ coating (full coat) makes this slim profile plate overall .5-.6″ in total thickness As with all of our Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited. The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.   See A Comparison of Our Full Line of Body Armor:

AR550 Level III+ Steel Body Armor Panel Ergonomic Multi-Curve design at no extra cost Special Bullet Liner® Anti-Spall Coating Shooters Cut Rated and tested to: NIJ STD-0101.06 Level III and special threats listed in NIJ STD-0101.07 Draft Rifle 2 Proudly made in the U.S.A Features Emergency drag handle Removable anti-slip shoulder pads, with hook and loop guides Adjustable shoulder straps MOLLE webbing for modular attachments Hook and loop webbing Breathable 3D Mesh liner Quick release buckles Easy access plate pockets Accepts Caliber Armor AR550 Steel Plates in 10″ x 12″ Size: : Adjustable sizing from 32″ – 54″ waist size Available in:OD GreenBlackCoyote BrownScorpion OCP Caliber Armor AR550 Level III+ Active Shooter Response Package With Spall Coat AR550 Level III+ Steel Body Armor Panel Ergonomic Multi-Curve design at no extra cost Special Bullet Liner® Anti-Spall Coating Shooters Cut Rated and tested to: NIJ STD-0101.06 Level III and special threats listed in NIJ STD-0101.07 Draft Rifle 2 Proudly made in the U.S.A We have gone above and beyond to bring you steel body armor of a HIGHER CALIBER. This can be seen with our bend process, our fragmentation coating and our finishing details. This was the material that we started from and have the most experience with. We’ve seen it, done it, we’ve improved it. Steel Body Armor provides great protection that can stop multiple projectile hits. We have been working with different levels of abrasion resistant (AR) ballistic steel for years and have not found a better product than our AR550 Steel Body Armor Plates. This armor is rated at a level III+ as it can defeat special threats like M855 rounds. All of our steel plates come in one ergonomic curve option. We have worked with LE and first responders to design a curve that you can be comfortable wearing. We provide this at no additional cost. What is unique about the way that we bend our steel is important too. We have designed a press that creates a multi curve bend in ONE step. Why is this important? When you do multiple bends to achieve a multi curve, it puts extra strain on the plate which can weaken it. We have replicated the same curves that you have seen in multi curve ceramic armor for years. Our aggressive Shooters Cut body armor plates shaves off weight while still providing enough coverage to protect your vital organs. Use our CaliberX™ Soft Armor Backers for even more protection and comfort. Our standard AR550 plate comes coated to protect the plate from rust and the elements. One concern with Steel Armor is fragmentation containment. Some of that fragmentation is contained in the armor’s plate carrier, but there still is a risk of lethal shrapnel. We HIGHLY recommend our Caliber Anti-Spall add on. We have teamed up with our friends at Bullet Liner® to formulate an anti-spall coating specifically for our armor application. This addition to your steel plate gives you peace of mind when wearing steel armor. Weights for AR550 Steel Body Armor: 10 x 12 – 8lb 7 oz with Anti-Spall Coating NIJ STANDARD-0101.06 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 Level III and also special threats listed in the New NIJ Standard- 0101.07 (Draft) Rifle 2. MANUFACTURING TOLERANCES: Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%. Sentry Plate Carrier Caliber Armor offers the Sentry Plate Carrier by Condor Outdoor because it one of the highest selling plate carriers on the market. For good reason, as it is widely used by law enforcement throughout our country. It is designed for modular attachments with quick release and cinch buckles. This carrier accepts Caliber Armor AR550 Steel Body Armor Plates in  10” x 12”. This package is is perfect for rapid response situations or to add to your workout routine. Features Emergency drag handle Removable anti-slip shoulder pads, with hook and loop guides Adjustable shoulder straps MOLLE webbing for modular attachments Hook and loop webbing Breathable 3D Mesh liner Quick release buckles Easy access plate pockets Accepts Caliber Armor AR550 Steel Plates in 10″ x 12″ Size: : Adjustable sizing from 32″ – 54″ waist size Available in:OD GreenBlackCoyote BrownScorpion OCP

Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 4S17 Plates   The Shellback Tactical Defender 2.0 Active Shooter Armor Kit with Level IV 4S17 Plates is your complete armored kit answer to being prepared for an active shooter situation. This complete kit is packed with features - Fully adjustable lightweight carrier, two model 4S17 level IV armor plates and a convenient carry bag for storage. Stay protected and order your Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 4S17 Plates today!  Kit Components Shellback Tactical Defender 2.0 Plate Carrier x 1  Shellback Tactical Kit Carrying Bag x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Defender 2.0 Plate Carrier Features Constructed of durable 500 denier Nylon  Holds 10 x 12 shooter cut plates Lightweight laser cut molle  Fully adjustable side straps and shoulders One size fits most  Integrated padded shoulder pads for comfort Front and back molle loop panels for placards and patches Two integrated kangaroo M4 magazine pouches with bungee retention One integrated tourniquet pouch marked with a red tab for easy identification Drag handle on the rear Lifetime warranty  Imported Kit Carrying Bag Constructed of 500 denier nylon Bag will hold Shellback Defender 2.0 Plate Carrier, plates and magazines Two carrying straps Loop panels for hook placard and patches Zipper closure Lifetime warranty Imported Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER  Product Overview The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.  Ready For Anything Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike. Spartan Armor Systems® Sentinel Plate Carrier Specs: Adjustable from 38" To 48" Chest Size Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Padded Mesh Separators For The Interior Of The Carrier For Breathability Fits 10" X 12" Shooters Cut Plates Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9” X 3” Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 2lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates. SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO  Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.  Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process. Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo. IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation. Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates. Shooters Cut Plate Weight (per plate):. 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side Plate Weight (per plate):     6×6 approximately 2lbs 9oz (base coat) AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only  See a Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.  The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.  

Wearing the Shellback Tactical Skirmish Active Shooter Armor Kit with Level IV 4S17 Plates means taking a tactical advantage into any active shooter situation. This complete kit features the Skirmish Plate Carrier and two level IV model 4S17 hard armor plates.  Shellback Tactical Skirmish Active Shooter Kit with Level IV 4S17 Plates Kit Components Shellback Tactical Skirmish Plate Carrier x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Skirmish Plate Carrier Features 500 Denier Nylon Low profile design for mobility 3D Spacer mesh padding for comfort Front kangaroo pouch Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes Heavy duty par tacking at key stress points  Fits 10 x 12 shooter cut plates  Lifetime Warranty Imported Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Shellback Tactical Skirmish Active Shooter Kit with Level IV 4S17 Plates Kit Components Shellback Tactical Skirmish Plate Carrier x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Skirmish Plate Carrier Features 500 Denier Nylon Low profile design for mobility 3D Spacer mesh padding for comfort Front kangaroo pouch Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes Heavy duty par tacking at key stress points  Fits 10 x 12 shooter cut plates  Lifetime Warranty Imported Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Shellback Tactical Banshee Elite 3.0 Active Shooter Kit with Level IV 4S17 Plates  Kit Components  Shellback Tactical Banshee Elite 3.0 Plate Carrier x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Banshee Elite 3.0 Plate Carrier Features  Laser cut Molle platform on front, rear and cummerbund reduces weight and adds durability  Two quick release cummerbund buckles to quickly don and doff plate carrier  Rear drag handle extends up to 34 inches in length Constructed of durable 500 denier Cordura nylon Plate pockets load from the bottom hold 10 x 12 shooter or SAPI cut plates Two Shoulder buckles allow quick adjustments to raise or lower plate carrier for the perfect fit 3D Spacer mesh padding on front, rear and shoulder pads for ventilation and comfort Cummerbund features 6 integrated M4 magazine pockets Cummerbund features 2 pockets to insert Banshee Elite 3.0 soft armor panels  Cummerbund features interior laser cut Molle panels to attach side armor plate pockets Front zipper admin pouch for small field gear such as notepads, pens and multitools Rear hydration pocket holds 2L hydration bladder Integrated nylon vertical strips to accommodate QASM buckles for chest rigs  Loop panels on front and rear for ID placards  Lifetime warranty  Made in the USA  Berry Compliant  Banshee Elite 3.0 Sizing  Plate pockets load from the bottom and accept up to 10 x 12 shooter or SAPI cut plates  2 Shoulder buckles allow for quick adjustment to raise or lower plate carrier for the perfect fit  Cummerbund comes in 2 sizes  Small/Medium - 32 inches to 39 inches Large/XLarge - 39 inches to 46 inches  How to Select a Size  Measure the circumference of your body where the bottom of your plate would sit on your torso  Take the measurement and add 2 inches to get your final measurement  Use your final measurement to select from the sizing chart above  Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP

Spartan Armor Systems AR550 Body Armor And Sentinel Swimmers Plate Carrier Package Spartan Armor Systems AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.  Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.   SPARTAN ARMOR SYSTEMS SENTINEL PLATE CARRIER Durable emergency drag handle Anti-Slip shoulder padding w/ velcro Side release buckles on internal waist strap Padded elevated mesh on the interior of carrier for breathability Fits 10x12 Swimmers cut plates Removable cummerbund with side plate pockets for 6x6 and 6x8 side plate armor Velcro in front of the Carrier is 8x4 w/ a velcro loop on each side Velcro on the back of the Carrier measures 9x3 Stronger carrier material that can withstand through wear and tear over a long period of time 1000 denier Bottom loading Weighs approximately 2lbs. 9oz. NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems. We can not guarantee a fit with plates made by other manufacturers.  NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates!

Shellback Tactical Defender 2.0 Active Shooter Kit  The Shellback Tactical Defender 2.0 Active Shooter Kit is your complete kit answer to being prepared for an active shooter situation. This kit is packed with features - lightweight laser cut molle, built in mag and tourniquet pouch and wrapped up in one convenient carrying bag.  For complete protection, add your personal hard armor plates or purchase a set Shellback Prevail series plates. Stay protected and order your Shellback Tactical Defender 2.0 Active Shooter Kit today!  Kit Components  Shellback Tactical Defender 2.0 Plate Carrier  Shellback Tactical Kit Carrying Bag  Defender 2.0 Plate Carrier Features  Constructed of durable 500 Denier Nylon  Holds 10 x 12 shooter cut plates Lightweight laser cut molle  Fully adjustable side straps and shoulders One size fits most  Integrated padded shoulder pads for comfort Front and back molle loop panels for placards and patches Two integrated kangaroo M4 magazine pouches with bungee retention One integrated tourniquet pouch marked with a red tab for easy identification Drag handle on the rear Lifetime warranty  Imported Shellback Kit Carrying Bag  Constructed of 500 Denier Nylon Bag will hold plate carrier fully loaded with plates Two carrying straps  Loop panels for ID placard and patches  Zipper closure  Lifetime warranty  Imported

Shellback Tactical Banshee Active Shooter Kit with Level IV 4S17 Plates The Shellback Tactical Banshee Active Shooter Kit with Level IV 4S17 Plates is a cost effective solution for active shooter preparation and response.  This kit provides protection against both hand gun and rifle rounds.  Kit Components  Shellback Tactical Banshee Rifle Plate Carrier® x 1 Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2  Banshee Rifle Plate Carrier® Features  Constructed of durable 500 Denier nylon  Holds 10 x 12 shooter or SAPI cut ballistic plates  Removable cummerbund with interior and exterior PALS for side plates Cummerbund accepts 13.75" x 5.5" soft armor inserts  Quick release secondary securing system Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest. Fully adjustable and padded front, back and shoulder areas. Two areas of loop on front and rear for id placards Front pocket accepts kangaroo inserts  Heavy Duty bar tacking at key stress points Wire, antenna or hydration hose guides Low profile design for mobility  Rear drag handle  Now approved with the Los Angeles Police Department (L.A.P.D.)- NTOA (NATIONAL TACTICAL OFFICER ASSOCIATION) APPROVED Lifetime warranty  GSA and TAA Compliant  Level IV Model 4S17 Plate Features NIJ threat level IV  NIJ 0101.06 Certified  DEA Compliant  Listed on NIJ compliant products list  Weight 7.2lbs Stand alone protection Single Curve Single Plate 10" x 12" Shooters Cut plate is considered nominal with actual measurement 9.5" x 11.5"  Thickness - .95" Multi-hit rated  M2AP - 3 Rounds  M80 Ball, Steel - 3 Rounds  M43 MSC PS - 3 Rounds  M855 Ball - 3 Rounds   223 REM - 3 Rounds  1000 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing  10 year ballistic warranty  USA Made - Berry compliant  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Advanced plate carrier that is feature packed 500 Denier  Front Top Zippered Admin Pouch Front Lower Velcro kangaroo pouch PALS web attachment points covering the front, back and shoulders of the vest Mil spec laser cut PALS Webbing on the shoulders Cummerbund is designed to hold a 5"x15" IIIA soft armor inside each side. Cummerbund has a proprietary retained shock cord system to allow stretch while being held in place to stop sagging. Cummerbund is removable and the carrier is equipped with removable quick release buckles Genuine US Mil Spec Webbing Velcro on the back Drag Handle keeps it in place Heavy Duty bar tacking at key stress points Communication or hydration hose guides  Padded Front and back interior of carrier with airflow channels sewn in Front and back areas of Velcro for identifiers Bottom Loading Plate Pockets accepts 10x12, SAPI and Similar Armor All pieces Made in USA, assembled in Mexico *Note* This plate carrier by itself will only hold 5x15 Soft Armor Panels, this package will come with a molle system to attach on your 6x6 or 6x8 side plates.  Leonidas Plate Carrier System with Spartan Armor Systems™ Omega™ AR500 Body Armor The Leonidas plate carrier is an advanced plate carrier system is fit for a Spartan King, hence the name "Leonidas". This versatile plate carrier hosts a wide variety of proven features including a removable cummerbund. When you are looking for the toughest plate carrier available to take into battle this is it. Take a look at all the features below. Advanced plate carrier that is feature packed 500 Denier  Front Top Zippered Admin Pouch Front Lower Velcro kangaroo pouch PALS web attachment points covering the front, back and shoulders of the vest Mil spec laser cut PALS Webbing on the shoulders Cummerbund is designed to hold a 5"x15" IIIA soft armor inside each side. Cummerbund has a proprietary retained shock cord system to allow stretch while being held in place to stop sagging. Cummerbund is removable and the carrier is equipped with removable quick release buckles Genuine US Mil Spec Webbing Velcro on the back Drag Handle keeps it in place Heavy Duty bar tacking at key stress points Communication or hydration hose guides  Padded Front and back interior of carrier with airflow channels sewn in Front and back areas of Velcro for identifiers Bottom Loading Plate Pockets accepts 10x12, SAPI and Similar Armor All pieces Made in USA, assembled in Mexico *Note* This plate carrier by itself will only hold 5x15 Soft Armor Panels, this package will come with a molle system to attach on your 6x6 or 6x8 side plates.  Spartan™ Omega™ AR500 Body Armor - High Quality Ballistic Threat Protection With all of our Spartan™ Omega™ AR500 Body Armor products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about Spartan™ Omega™ AR500 Body Armor and the steel we use to construct our body armor! You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die. Or with our Advanced Triple Curve ™.  Instead of bending our formed plates in 2 different locations as we used to, we have machined custom tooling to give these plates a nice curvature to best conform to the side of your torso. Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems’ ATC™ body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC™ armor better “hugs” the operator’s body, resulting in a significant increase in comfort. Our CNC equipment capabilities have allowed us to create dies which form our body armor without any “crease” bends. Crease bends, “work hardens” the plate and causes a significant amount of stress to the portion of the plate under load. We HIGHLY suggest when doing research to ask if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems™ has gone the extra mile to create this die process. These plates come as a pair.  Full Coat or Base Coat Options:  We are excited to announce our potentially “life saving” breakthrough!  The strike face for our plates is mark embedded with our Spartan logo! Both sides of these plates are coated, however, the back side only has a “courtesy coat” to protect against wear and rust. The front of the plate is lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. By purchasing, you will receive (2) Formed Spartan™ Omega™ AR500 Body Armor 10″x12” chest plates.  Due to popular demand, we have added a “base coat” only option for our AR500 Omega™ armor products. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.