Caliber Armor

Specifications Weight: 5oz Thickness: 1/4” Finish: waterproof ripstop material Caliber Armor Extreme Impact Trauma Pad Features Caliber Armor offers Extreme Impact Non-Ballistic Trauma Pads as an added layer to protect you from injuries from back face deformation in conjunction with wearing our body armor. These specially engineered pads absorb impact energy and provide comfort when wearing our body armor panels. The microcellular urethane foam that has been long trusted in sports impact protection has an extremely low compression set. The materials are high density and flexible. Trauma Pads work great to provide extra comfort with our AR550 Level III+ Armor Specifications Weight: 5oz Thickness: 1/4” Finish: waterproof ripstop material *Note: Caliber Armor Trauma Pads are NON-BALLISTIC. They offer no increase in ballistic protection.

Soft Body Armor Panel 5.75″x11.5″ (set of two) verified to fit Condor MOPC Gen II and EXO Gen II-S-M Cummerbund 5.75″X14″ (set of two) verified to fit Condor EXO Gen II L-XL Cummerbund 5″x14″ (set of two) verified to fit Chase Tactical MEAC and London Bridge Trading LBT 6094A Cummerbund Lightweight, ultra thin CaliberX™ .19″ thick Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Interior sewn together for longevity TSA Approved Proudly made in the U.S.A Side Panels are sold in a set of two Caliber Armor CaliberX Soft Armor Side Plate Panels Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density. We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing.

American Craftsmanship: Each AR550 Steel Body Armor Panel is proudly made in the U.S.A., ensuring an unmatched standard of quality that resonates with the patriotic spirit of our defenders. Elite Protection: NIJ STD-0101.06 Level III compliant and ready to combat special threats listed under NIJ STD-0101.07 Draft RF2 – offering peace of mind in the most unpredictable situations. Ergonomic Excellence: A unique multi-curve design, molded in one bend, ensures comfort and mobility without compromising on protection, empowering our heroes to move swiftly and securely. Shooters Cut Advantage: Strategically designed to shed extra weight but shield the most critical zones, ensuring agility in high-pressure situations. Unyielding Defense: The AR550 Level III+ Steel Body Armor & MOPC Gen II Package Enter the arena of life with the confidence that only world-class protection can provide. Designed for those who are the shield against adversities – police officers, military personnel, private security, and tactical gear enthusiasts – this armor is the embodiment of strength and safety. 🛡 Forge of Excellence: Each AR550 Steel Body Armor Panel stands as a testament to American craftsmanship. With its foundation in the USA, its quality, precision, and performance remain unmatched. 🛡 Maximum Protection, No Compromise: Experience a protection level that surpasses the norm. This armor is not only compliant with NIJ STD-0101.06 Level III but also faces the challenges posed by special threats under NIJ STD-0101.07 Draft RF2. From standard threats to special ones like M855 rounds, this armor has your back. 🛡 Ergonomic Mastery: Comfort doesn’t take a back seat. With a multi-curve design molded in a single bend process, it ensures less strain and a snug fit. This innovative design mimics the precision of multi-curve ceramic armor, ensuring you feel secure without compromising on comfort. 🛡 Shooters Cut - Agile and Efficient: Shedding extra weight but shielding essential zones, the Shooters Cut design maximizes mobility while ensuring your vital organs remain protected. 🛡 Guarded Against Nature and Fragmentation: The powder-coated finish keeps elements at bay, ensuring your armor's longevity. When it comes to shrapnel, team it up with the Caliber Anti-Spall add-on. Crafted in collaboration with Bullet Liner®, this specialized coating acts as an extra layer, safeguarding you from potential fragmentation. 🛡 MOPC Gen II - Tactical Brilliance: Chosen by countless law enforcement officers, the Modular Operator Plate Carrier (MOPC) Gen II stands tall in adaptability. MOLLE webbing ensures modular attachment, and the breathable 3D Mesh liner keeps ventilation in check. Whether you choose the full cummerbund or scale it down with the internal waist strap, flexibility remains at its core. Available in various shades, this carrier seamlessly integrates with Caliber Armor AR550 Steel Body Armor Plates, presenting options for side protection. Let every challenge know you're equipped with the best, ready to face whatever comes your way. With this package, you're not just buying armor; you're investing in unwavering confidence, superior safety, and an emblem of commitment to excellence. Stay guarded, stay ahead. Weights for AR550 Steel Body Armor: 10 x 12 – 8lb 13 oz with Anti-Spall Coating NIJ STANDARD-0101.06 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 Level III and also special threats tested included in the draft NIJ Standard- 0101.07 RF2. MANUFACTURING TOLERANCES: Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%. Cummerbund Size: Adjustable from 40″ – 48″ (measure around your navel) Accepts Caliber Armor AR550 Steel Plates in 10″ x 12″ and 11″x 14″ or any other ESAPI sizes up to 10.25″ x 13.25 Side plate capacity compatible with our CaliberX IIIA soft armor. This is a great option for side protection for a fraction of the weight. Available in:OD GreenBlackCoyote BrownScorpion OCP

Weights for AR550 Steel Body Armor: 6 x 6: 2.5 lbs with standard coating/3 lbs for Bullet Liner Spall Coating 6 x 8: 3.31 lbs with standard coating/4 lbs for Bullet Liner Spall Coating Caliber Armor AR550 III+ Steel Body Armor Side Plate This can be seen with our bend process, our fragmentation coating and our finishing details. This was the material that we started from and have the most experience with. We’ve seen it, done it, we’ve improved it. Steel Body Armor provides great protection that can stop multiple projectile hits. We have been working with different levels of abrasion resistant (AR) ballistic steel for years and have not found a better product than our AR550 Steel Body Armor Plates. This armor is rated at a level III+ as it can defeat special threats like M855 rounds. All of our steel plates come in one ergonomic curve option. We have worked with LE and first responders to design a curve that you can be comfortable wearing. We provide this at no additional cost. What is unique about the way that we bend our steel is important too. We have designed a press that creates a multi curve bend in ONE step. Why is this important? When you do multiple bends to achieve a multi curve, it puts extra strain on the plate which can weaken it. We have replicated the same curves that you have seen in multi curve ceramic armor for years. Our aggressive Shooters Cut body armor plates shaves off weight while still providing enough coverage to protect your vital organs. Use our CaliberX™ Soft Armor Backers for even more protection and comfort. Our standard AR550 plate comes coated to protect the plate from rust and the elements. One concern with Steel Armor is fragmentation containment. Some of that fragmentation is contained in the armor’s plate carrier, but there still is a risk of lethal shrapnel. We HIGHLY recommend our Caliber Anti-Spall add on. We have teamed up with our friends at Bullet Liner® to formulate an anti-spall coating specifically for our armor application. This addition to your steel plate gives you peace of mind when wearing steel armor.   Weights for AR550 Steel Body Armor: 6 x 6: 2.5 lbs with standard coating/3 lbs for Bullet Liner Spall Coating 6 x 8: 3.31 lbs with standard coating/4 lbs for Bullet Liner Spall Coating

Level III+ Rated for Advanced Threat Protection: Confidently face high-risk situations with armor that can stop specialized threats like M855 rounds. Ergonomic Multi-Curve Design: Customized comfort and fit, ensuring full mobility and endurance in prolonged operations. Shooter Cut for Weight Efficiency: Ideal balance of protection and agility, enhancing performance without sacrificing safety. CaliberX™ Soft Armor Backers: Additional protection layer that amplifies comfort and security. Bullet Liner Spall Coat for Fragmentation Safety: Minimize the risk of shrapnel injuries, offering peace of mind in volatile environments. The Caliber Armor AR550 III+ Multi-Curve Steel Body Armor with Bullet Liner Spall Coat is a pinnacle of protection, designed for those who face the most challenging and hazardous environments. This body armor excels in offering unparalleled safety and confidence to police officers, military personnel, private security, and tactical gear enthusiasts. Crafted with the finest AR550 steel, renowned for its superior strength and resilience, this armor is rated at level III+, capable of defeating specialized threats like M855 rounds. The innovative multi-curve design, developed in collaboration with law enforcement and first responders, ensures an ergonomic fit that offers both comfort and comprehensive protection. This unique design is achieved through a specialized one-step press, ensuring the steel's integrity and strength are maintained, a crucial aspect for those who cannot compromise on safety. The armor's Shooter Cut design strategically reduces weight while maintaining essential coverage, ensuring agility and ease of movement in critical situations. Coupled with the CaliberX™ Soft Armor Backers, it provides an added layer of protection and comfort, making it an indispensable asset in high-risk operations. The standard anti-rust coating on the AR550 plates is a testament to its durability and longevity. The highlight, however, is the partnership with Bullet Liner® to formulate an exclusive anti-spall coating. This innovation significantly reduces the risk of lethal shrapnel, providing an added layer of security and peace of mind for those in the line of duty. Size (inches) Weight with Anti-Spall Coating (lb) Weight with Anti-Spall Coating (kg) 10 x 12 8 lb 7 oz 3.83 kg 8 x 10 5 lb 14.8 oz 2.69 kg 11 x 14 9 lb 13.3 oz 4.46 kg

Specifications Weight: 5oz Thickness: 1/4” Finish: waterproof ripstop material Caliber Armor Extreme Impact Trauma Pad Shooters Cut Features Caliber Armor offers Extreme Impact Non-Ballistic Trauma Pads as an added layer to protect you from injuries from back face deformation in conjunction with wearing our body armor. These specially engineered pads absorb impact energy and provide comfort when wearing our body armor panels. The microcellular urethane foam that has been long trusted in sports impact protection has an extremely low compression set. The materials are high density and flexible. Trauma Pads work great to provide extra comfort with our AR550 Level III+ Armor Specifications Weight: 5oz Thickness: 1/4” Finish: waterproof ripstop material *Note: Caliber Armor Trauma Pads are NON-BALLISTIC. They offer no increase in ballistic protection.

Weights for Caliber Armor AR550 Steel Body Armor: 10 x 12 SAPI Style- 8lbs 6oz Standard Coating, 9lbs 7oz with Spall Coating Caliber Armor AR550 III+ Multi-Curve Steel Sapi Style Body Armor This can be seen with our bend process, our fragmentation coating and our finishing details. This was the material that we started from and have the most experience with. We’ve seen it, done it, we’ve improved it. Steel Body Armor provides great protection that can stop multiple projectile hits. We have been working with different levels of abrasion resistant (AR) ballistic steel for years and have not found a better product than our AR550 Steel Body Armor Plates. This armor is rated at a level III+ as it can defeat special threats like M855 rounds. All of our steel plates come in one ergonomic curve option. We have worked with LE, and first responders to design a curve that you can be comfortable wearing. We provide this at no additional cost. What is unique about the way that we bend our steel is important too. We have designed a press that creates a multi curve bend in ONE step. Why is this important? When you do multiple bends to achieve a multi curve, it puts extra strain on the plate which can weaken it. We have replicated the same curves that you have seen in multi curve ceramic armor for years. Our SAPI Style 10×12 can be used for more coverage than our aggressive Shooters Cut body armor plates shaves off weight while still providing enough coverage to protect your vital organs. Use our CaliberX™ Soft Armor Backers for even more protection and comfort. Our standard plate comes coated to protect the plate from rust and the elements. One concern with Steel Armor is fragmentation containment. Some of that fragmentation is contained in the armor’s plate carrier, but there still is a risk of lethal shrapnel. We recommend our Caliber Anti-Spall add on. We have teamed up with our friends at Bullet Liner® to formulate an anti-spall coating specifically for our armor application. This addition to your steel plate gives you peace of mind when wearing steel armor.   Weights for Caliber Armor AR550 Steel Body Armor: 10 x 12 SAPI Style- 8lbs 6oz Standard Coating, 9lbs 7oz with Spall Coating  

Made in the USA: Proudly Made in Louisville, KY. Embodying the quality and craftsmanship expected from American-made gear. Trust and confidence that your armor is designed and manufactured to the highest standards. High-Level Protection: Level III+ armor, capable of stopping multiple projectiles and special threats like M855 rounds, offering users the ultimate safeguard in extreme situations. Ergonomic Curve Design: Uniquely designed with an ergonomic curve that provides comfortable wear and excellent coverage. This armor fits like a glove and doesn't compromise your movement. Single Step Multi-Curve Bend: Crafted using a specialized press that creates a multi-curve bend in one step, keeping the plate's strength intact while mimicking the curves of multi-curve ceramic armor. Aggressive Shooters Cut: Shaves off weight but maintains ample coverage, ensuring that vital organs are securely protected. You get the ideal blend of mobility and safety. Presenting the **Caliber Armor AR550 III+ Multi-Curve Steel Body Armor** - a tactical masterpiece crafted with precision and commitment to protection. This armor's manufacturing process speaks volumes about its resilience, from the meticulous bending process to its protective coating and fine finishing.Experience superior protection with this Level III+ armor, diligently designed to intercept multiple projectile hits and special threats like M855 rounds. Rest assured, it's not just another steel armor - it's the culmination of years of experience in handling abrasion-resistant ballistic steel. It's the epitome of dependable, life-saving gear.Incorporating a unique ergonomic curve, this body armor promises comfortable wear, making it a staple for law enforcement and first responders. And here's the best part: the curve isn't achieved by multiple bends which could weaken the plate. Instead, it's shaped using a specialized press that forms a multi-curve bend in one step, offering both comfort and strength.The armor's aggressive Shooters Cut design minimizes weight but maximizes coverage, securing vital organs effectively. Add the CaliberX™ Soft Armor Backers for an extra layer of protection and comfort.This armor comes with a standard coating that protects against rust and elemental wear. But in the demanding tactical world, every detail matters. That's why an optional Caliber Anti-Spall add-on is recommended to contain possible fragmentation and shrapnel, giving you additional peace of mind while wearing this steel armor.Weights for Caliber Armor AR550 Steel Body Armor are as follows: Size Standard Weight (lb) Standard Weight (kg) With Anti-Spall Coating (lb) With Anti-Spall Coating (kg) 10 x 12 7.375 lb 3.35 kg 8.4375 lb 3.83 kg 8 x 10 4.925 lb 2.23 kg 5.925 lb 2.69 kg 11 x 14 8.8313 lb 4.01 kg 9.8313 lb 4.46 kg Choose the **Caliber Armor AR550 III+ Multi-Curve Steel Body Armor** today. After all, those in high-stake situations deserve nothing less than the highest level of protection.  

Proudly American Craftsmanship: A symbol of unparalleled safety and excellence, ensuring frontline heroes carry a promise of premium protection. NIJ Standard-0101.06 Certification: Tested to not just meet, but exceed rigorous ballistic resistance standards for ultimate peace of mind. Innovative One-Step Multi-Curve Design: A groundbreaking approach ensuring uncompromised wearability without the usual strain on plate integrity. Nationally Celebrated Choice: Trusted by law enforcement nationwide, it's more than gear; it's a badge of unmatched safety. Caliber Armor AR550 Level III+ Body Armor With Spall Coat Experience a HIGHER CALIBER of protection with the Caliber Armor AR550 Level III+ Body Armor. Born from years of meticulous craftsmanship and innovation, this armor showcases American excellence, ensuring you wear not just armor, but a promise of unparalleled safety. Every inch of this AR550 steel body armor echoes protection that withstands even the formidable M855 rounds. Its unique one-step multi-curve design, a brainchild of feedback from the frontline's bravest, promises wearability without compromise. What sets it apart? While most multi-curve designs strain and weaken plates through multiple bends, Caliber Armor's innovative one-bend process ensures the armor's integrity, drawing inspiration from the best in multi-curve ceramic armor. But it's not just about the steel. The signature Shooters Cut trimmings shave off weight yet shield vital organs with precision. And while the armor stands robust against nature's whims, the true hero is the game-changing Bullet Liner® Anti-Spall Coating. Crafted in collaboration with Bullet Liner®, it's more than just a coating; it's a guardian against lethal shrapnel, offering an added layer of confidence in the face of adversity. Carry the weight of assurance, not burden, with the AR550 – an emblem of resilience, innovation, and unmatched protection. For those who stand fearless in the face of danger, this isn't just armor; it's a wearable testament to valor. Stand tall. Stand protected. Stand with Caliber Armor. Weights for AR550 Steel Body Armor: 10 x 12 – 8lb 7 oz with Anti-Spall Coating NIJ STANDARD-0101.06 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 Level III and also tested for special threats listed on the new draft NIJ Standard- 0101.07 RF2. MANUFACTURING TOLERANCES: Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%. Modular Operator Plate Carrier (MOPC) Gen II Experience unbeatable protection on the frontline with the Modular Operator Plate Carrier (MOPC) Gen II by Condor Outdoor, handpicked by Caliber Armor for those who demand only the best. This plate carrier, celebrated nationwide and trusted by law enforcement, isn't just equipment; it's a shield of valor. Embrace unparalleled modularity as MOLLE webbing envelopes all sides, ready to tailor to your mission needs and ensuring peak operational mobility. Whether you opt for the revered Caliber Armor AR550 Steel Body Armor Plates, or any other ESAPI sizes, this carrier ensures a snug fit, amplifying protection. But here's the clincher: Adaptability. Whether you’re gearing up for intense operations or scaling down, the choice between a full cummerbund or an internal waist strap offers flexibility without compromise. And every detail – from the emergency drag handle to the breathable 3D Mesh liner – speaks of a design that’s centered on the user's safety and comfort. Unveil your tactical prowess in a selection of finishes, from the commanding Black Multi-Cam to the resilient Scorpion OCP. This isn't just another plate carrier. It's a testament to unwavering strength, designed for those who stand on the thin line between order and chaos. Choose the MOPC Gen II and wear your armor with pride. Accepts Caliber Armor AR550 Steel Plates in 10″ x 12″ and 11″x 14″ or any other ESAPI sizes up to 10.25″ x 13.25 Available in:OD GreenBlackCoyote BrownScorpion OCPBlack Multi-Cam

Caliber Armor CaliberX IIIa Soft Body Armor Panel Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density. We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing.

AR550 Level III+ Steel Body Armor Panel Ergonomic Multi-Curve design at no extra cost Special Bullet Liner® Anti-Spall Coating Shooters Cut Rated and tested to: NIJ STD-0101.06 Level III and special threats listed in NIJ STD-0101.07 Draft Rifle 2 Proudly made in the U.S.A Features Emergency drag handle Removable anti-slip shoulder pads, with hook and loop guides Adjustable shoulder straps MOLLE webbing for modular attachments Hook and loop webbing Breathable 3D Mesh liner Quick release buckles Easy access plate pockets Accepts Caliber Armor AR550 Steel Plates in 10″ x 12″ Size: : Adjustable sizing from 32″ – 54″ waist size Available in:OD GreenBlackCoyote BrownScorpion OCP Caliber Armor AR550 Level III+ Active Shooter Response Package With Spall Coat AR550 Level III+ Steel Body Armor Panel Ergonomic Multi-Curve design at no extra cost Special Bullet Liner® Anti-Spall Coating Shooters Cut Rated and tested to: NIJ STD-0101.06 Level III and special threats listed in NIJ STD-0101.07 Draft Rifle 2 Proudly made in the U.S.A We have gone above and beyond to bring you steel body armor of a HIGHER CALIBER. This can be seen with our bend process, our fragmentation coating and our finishing details. This was the material that we started from and have the most experience with. We’ve seen it, done it, we’ve improved it. Steel Body Armor provides great protection that can stop multiple projectile hits. We have been working with different levels of abrasion resistant (AR) ballistic steel for years and have not found a better product than our AR550 Steel Body Armor Plates. This armor is rated at a level III+ as it can defeat special threats like M855 rounds. All of our steel plates come in one ergonomic curve option. We have worked with LE and first responders to design a curve that you can be comfortable wearing. We provide this at no additional cost. What is unique about the way that we bend our steel is important too. We have designed a press that creates a multi curve bend in ONE step. Why is this important? When you do multiple bends to achieve a multi curve, it puts extra strain on the plate which can weaken it. We have replicated the same curves that you have seen in multi curve ceramic armor for years. Our aggressive Shooters Cut body armor plates shaves off weight while still providing enough coverage to protect your vital organs. Use our CaliberX™ Soft Armor Backers for even more protection and comfort. Our standard AR550 plate comes coated to protect the plate from rust and the elements. One concern with Steel Armor is fragmentation containment. Some of that fragmentation is contained in the armor’s plate carrier, but there still is a risk of lethal shrapnel. We HIGHLY recommend our Caliber Anti-Spall add on. We have teamed up with our friends at Bullet Liner® to formulate an anti-spall coating specifically for our armor application. This addition to your steel plate gives you peace of mind when wearing steel armor. Weights for AR550 Steel Body Armor: 10 x 12 – 8lb 7 oz with Anti-Spall Coating NIJ STANDARD-0101.06 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 Level III and also special threats listed in the New NIJ Standard- 0101.07 (Draft) Rifle 2. MANUFACTURING TOLERANCES: Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%. Sentry Plate Carrier Caliber Armor offers the Sentry Plate Carrier by Condor Outdoor because it one of the highest selling plate carriers on the market. For good reason, as it is widely used by law enforcement throughout our country. It is designed for modular attachments with quick release and cinch buckles. This carrier accepts Caliber Armor AR550 Steel Body Armor Plates in  10” x 12”. This package is is perfect for rapid response situations or to add to your workout routine. Features Emergency drag handle Removable anti-slip shoulder pads, with hook and loop guides Adjustable shoulder straps MOLLE webbing for modular attachments Hook and loop webbing Breathable 3D Mesh liner Quick release buckles Easy access plate pockets Accepts Caliber Armor AR550 Steel Plates in 10″ x 12″ Size: : Adjustable sizing from 32″ – 54″ waist size Available in:OD GreenBlackCoyote BrownScorpion OCP

Full coverage protection. Ultra-light comfort. Made in the USA.  CaliberX Panels for the NC Star VISM Expert Plate Carrier in XS deliver ultra-lightweight, full-coverage protection designed to fit seamlessly into the size X-Small VISM Expert Plate Carrier by NC STAR. This carrier is a great option for the people on your team that don’t fit into the standard size small carriers. The design blends with most department-issued vests. Our panels fit perfectly inside the full cavity of the front and back of the carrier.   Built with our hybrid UHMWPE/Para-Aramid armor system, these panels flex naturally to the body for superior comfort and mobility without compromising ballistic performance. This lightweight armor solution is easy to wear during long shifts and demanding environments.   Includes: (2) CaliberX Ultra-thin full coverage Soft Armor Panels (Front & Rear)   CaliberX Soft Armor Features: Lightweight Comfort – Meets the gold standard of 1.1 lb per sq. ft. areal density with ultralightweight hybrid of UHMWPE & Para-Aramid materials Only ¼ inch thick, with consistent ballistic performance NIJ Level IIIA/HG2 Protection – Rated and tested to NIJ 0101.06 Level IIIA and 0101.07 HG2 standards, defeating a wide range of handgun threats Water resistant ripstop panel covering Interior sewn for long term durability Full Coverage Panels – for complete front, back, and side coverage Ultimate Compatibility – made specifically for the Vism Expert Carrier (XS Only) for unmatched coverage TSA Approved Proudly Made in the USA – Manufactured in Louisville, Kentucky Sizing Guide: Measure your waist with a soft tape at navel height, wrapping fully around. Choose the size equal to or greater than your measurement: X-Small: 22”-33" CaliberX Soft Body Armor Panels The CaliberX Soft Ballistic Body Armor line is proudly manufactured in our Louisville, Kentucky facility. Designed to meet the gold standard of 1.1 lb per sq ft areal density, it delivers exceptional protection without unnecessary bulk. We engineered a hybrid layup of UHMWPE and Para-Aramid materials, creating panels that are 10% lighter and offer 15% less backface deformation than other soft armor systems — reducing blunt force trauma and increasing comfort. Our CaliberX Soft Armor system is crafted for resilience, withstanding multiple hits from powerful handguns. Each fiber absorbs and disperses energy to minimize trauma. This makes our armor comfortable, lightweight, and protective, enabling you to react quickly when it matters most. Ballistic Resistance & Protection Independently tested in accredited labs under NIJ-STD-0101.06 and 0101.07 HG2 guidelines, with additional special threat testing. Tested and verified to meet or exceed NIJ standards, the CaliberX Soft Armor Panels protect against multiple handgun threats. Rated to stop: 9mm FMJ .44 Magnum SJHP /JHP .357 SIG Why Choose Caliber Armor With its lightweight build, advanced materials, and American craftsmanship, CaliberX delivers unmatched comfort and proven protection for professionals and civilians alike. Our CaliberX body armor is proudly designed and made in the U.S.A. using domestic materials. This is the armor you can count on.

Caliber Armor RF2 Mini Shield with Value Line (VL) Fixed Handle | Advanced Ballistic Protection The Caliber Armor Mini RF2 Shield VL offers a superior level of ballistic protection. Designed for high-risk situations, this shield is a top choice for tactical professionals. Perfect for those who need top-level rifle & handgun protection in demanding environments. Built for durability, this ballistic shield can effectively stop & withstand multiple hits from both pistol & rifle rounds. With a minimalist design handle offering quick action without needing to strap the shield to your arm. ULTRA Series RF2 Shield Key Specifications Key Features: Dimensions: 12" x 18" Weight: 10.5 lbs Thickness: 0.35" Components: Includes a pre-mounted fixed center position handle and padded armrest Finish: Durable polyurea coating increases resistance to wear and tear Country of Origin: Proudly made in the U.S.A. Multi-shot rated: Ensures consistent protection across multiple impacts Entire Shield Tested: Including bolts and hardware, for complete reliability Our ULTRA Series RF2 Ballistic Shield is engineered to exceed industry standards, providing Level III++ and RF2 ballistic protection across the entire shield. It combines safety and adaptability, featuring a center position fixed handle for stability in the field. This shield's padded armrest enhances comfort during prolonged use. Unmatched Ballistic Protection The Caliber Armor ULTRA Series RF2 Ballistic Shield is rigorously tested to provide Level III++ / RF2 protection. Testing ensures comprehensive performance, meeting or exceeding NIJ standards and covering a range of special threats, including: 7.62x39mm Surrogate, 123 grain 5.56mm M855 BT, 62 grain 7.62x51mm M80 Ball, 149 grain 5.56mm M193, 56 grain DEA and Special Threats: 5.56x45mm M855A1 and 7.62x54R Testing Conditions: Muzzle positioned 50 feet from the target 0-degree obliquity impacts Velocity measured with infrared screens placed 8.25 feet from the target Testing Protocols and Performance Standards: Our testing adheres to NIJ-STD-0101.07 RF2 protocols, covering a range of threats and maintaining high standards in shield durability. Unlike many competitors, Caliber Armor tests the entire shield, including bolts and hardware, for complete reliability. QUALITY STANDARDS Caliber Armor follows a rigorous quality management systemto meet high industry standards. Every product undergoes extensive testing in accredited ballistic labs to ensure full compliance with industry standards.

Caliber Armor PRO Series IIIA-HG2 Shield Value Line (vl) Mini | Minimalist Handle The Caliber Armor PRO Series IIIA-HG2 Ballistic Shield is crafted for individuals who need top-level handgun protection in demanding environments. Built for durability, this ballistic shield effectively stops various handgun rounds while offering multi-hit resistance. With a minimalist design handle offering quick action without needing to strap the shield to your arm. PRO SERIES HG2 MINI Shield Key Specifications Key Features: Dimensions: 12" x 18" Weight: 6.38 lbs Thickness: 0.23" Components: Includes a pre-mounted fixed center position handle and padded armrest Construction: Made from ultra-hard alloy, ensuring superior multi-shot durability Finish: Polyurea coating that enhances durability Country of Origin: Proudly made in the U.S.A. Our PRO Series HG2 Shield is engineered to exceed industry standards, providing Level IIIA/HG2 ballistic protection across the entire shield. This includes bolts and all hardware for complete reliability. This shield is multi-shot rated to ensure consistent protection across multiple impacts. Superior Handgun Protection The Caliber Armor PRO Series IIIA-HG2 Shield is rigorously tested to provide Level IIIA/HG2 protection with enhanced special threats. Our testing ensures comprehensive performance, meeting or exceeding NIJ standards and covering a range of special threats including: 9mm FMJ and LCD .44 Magnum JHP and SJHP .357 SIG .45 ACP FN 5.7x28mm SS197 7.62x25 Tokarev 85gr FMJ *This Caliber Armor ballistic shield is fully compliant with Texas House Bill 33 (“Uvalde Strong Act”) school safety requirements. For details, specifications, or purchasing questions, please contact our team at sales@caliberarmor.com. Proven Performance with Industry-Leading Testing Caliber Armor prioritizes both performance and reliability. Therefore, each shield is tested to ensure it meets or exceeds industry standards. ThePRO Series IIIA-HG2 Shield complies with NIJ Level IIIA and HG2 standards, offering dependable protection against multiple handgun threats. Caliber Armor Ballistic Resistance Testing: Testing occurs indoors under carefully controlled conditions, following the guidelines of: NIJ-STD-0101.06, NIJ-STD-0101.07 HG2, and Special Threats Testing Protocols Include: Rounds: .44 Magnum SJHP, .357 SIG, 9mm FMJ Special Threats: .357 Magnum 158gr JSP, .44 Magnum 240gr SWCG, FN 5.7x28mm SS197, and others. QUALITY STANDARDS Caliber Armor follows a rigorous quality management system to meet high industry standards. Every product undergoes extensive testing in accredited ballistic labs.

Caliber Armor RF2 Mini Shield with Streamlined (SL) Fixed Handle | Advanced Ballistic Protection The Caliber Armor Mini RF2 Shield SL offers a superior level of ballistic protection. Designed for high-risk situations, this shield is a top choice for tactical professionals. Perfect for those who need top-level rifle & handgun protection in demanding environments. Built for durability, this ballistic shield can effectively stop & withstand multiple hits from both pistol & rifle rounds. Featuring a streamlined center-position handle and a secure forearm strap, it provides rapid, responsive control with a reliable hold. ULTRA Series RF2 Shield Key Specifications Key Features: Dimensions: 12" x 18" Weight: 13 lbs Thickness: 0.34" Components: Includes a pre-mounted fixed center position handle and padded armrest Finish: Durable polyurea coating increases resistance to wear and tear Country of Origin: Proudly made in the U.S.A. Multi-shot rated: Ensures consistent protection across multiple impacts Entire Shield Tested: Including bolts and hardware, for complete reliability Our ULTRA Series RF2 Ballistic Shield is engineered to exceed industry standards, providing Level III++ and RF2 ballistic protection across the entire shield. It combines safety and adaptability, featuring a center position fixed handle for stability in the field. This shield's padded armrest enhances comfort during prolonged use. Unmatched Ballistic Protection The Caliber Armor ULTRA Series RF2 Ballistic Shield is rigorously tested to provide Level III++ / RF2 protection. Testing ensures comprehensive performance, meeting or exceeding NIJ standards and covering a range of special threats, including: 7.62x39mm Surrogate, 123 grain 5.56mm M855 BT, 62 grain 7.62x51mm M80 Ball, 149 grain 5.56mm M193, 56 grain DEA and Special Threats: 5.56x45mm M855A1 and 7.62x54R *This Caliber Armor ballistic shield is fully compliant with Texas House Bill 33 (“Uvalde Strong Act”) school safety requirements. For details, specifications, or purchasing questions, please contact our team at sales@caliberarmor.com. Testing Conditions: Muzzle positioned 50 feet from the target 0-degree obliquity impacts Velocity measured with infrared screens placed 8.25 feet from the target Testing Protocols and Performance Standards: Our testing adheres to NIJ-STD-0101.07 RF2 protocols, covering a range of threats and maintaining high standards in shield durability. Unlike many competitors, Caliber Armor tests the entire shield, including bolts and hardware, for complete reliability. QUALITY STANDARDS Caliber Armor follows a rigorous quality management systemto meet high industry standards. Every product undergoes extensive testing in accredited ballistic labs to ensure full compliance with industry standards.

Caliber Armor PRO Series IIIA-HG2 Shield Mini | Streamlined (SL) Handle The Caliber Armor PRO Series IIIA-HG2 Ballistic Shield is crafted for individuals who need top-level handgun protection in demanding environments. Built for durability, this ballistic shield effectively stops various handgun rounds while offering multi-hit resistance. Featuring a streamlined center-position handle and a secure forearm strap, it provides rapid, responsive control with a reliable hold. PRO SERIES HG2 MINI Shield Key Specifications Key Features: Dimensions: 12" x 18" Weight: 7 lbs Thickness: 0.23" Components: Includes a pre-mounted fixed center position handle, adjustable arm strap, and padded armrest Construction: Made from ultra-hard alloy, ensuring superior multi-shot durability Finish: Polyurea coating that enhances durability Country of Origin: Proudly made in the U.S.A. Our PRO Series HG2 Shield is engineered to exceed industry standards, providing Level IIIA/HG2 ballistic protection across the entire shield. This includes bolts and all hardware for complete reliability. This shield is multi-shot rated to ensure consistent protection across multiple impacts. Superior Handgun Protection The Caliber Armor PRO Series IIIA-HG2 Shield is rigorously tested to provide Level IIIA/HG2 protection with enhanced special threats. Our testing ensures comprehensive performance, meeting or exceeding NIJ standards and covering a range of special threats including: 9mm FMJ and LCD .44 Magnum JHP and SJHP .357 SIG .45 ACP FN 5.7x28mm SS197 7.62x25 Tokarev 85gr FMJ *This Caliber Armor ballistic shield is fully compliant with Texas House Bill 33 (“Uvalde Strong Act”) school safety requirements. For details, specifications, or purchasing questions, please contact our team at sales@caliberarmor.com. Proven Performance with Industry-Leading Testing Caliber Armor prioritizes both performance and reliability. Therefore, each shield is tested to ensure it meets or exceeds industry standards. ThePRO Series IIIA-HG2 Shield complies with NIJ Level IIIA and HG2 standards, offering dependable protection against multiple handgun threats. Caliber Armor Ballistic Resistance Testing: Testing occurs indoors under carefully controlled conditions, following the guidelines of: NIJ-STD-0101.06, NIJ-STD-0101.07 HG2, and Special Threats Testing Protocols Include: Rounds: .44 Magnum SJHP, .357 SIG, 9mm FMJ Special Threats: .357 Magnum 158gr JSP, .44 Magnum 240gr SWCG, FN 5.7x28mm SS197, and others. QUALITY STANDARDS Caliber Armor follows a rigorous quality management system to meet high industry standards. Every product undergoes extensive testing in accredited ballistic labs.

Caliber Armor PRO Series HG2 RAPID RESPONSE Shield TheCaliber Armor PRO Series IIIA-HG2 Ballistic Rapid Response Shield offers a superior level of handgun rated ballistic protection. Crafted for individuals who need top-level pistol protection in demanding environments. Designed to be placed near other emergency response tools in businesses, municipalities, schools, and places of worship. These easy to use shields can be picked up by law enforcement, security staff, or emergency response teams during active shooter situations. They can also be handled by other staff members easily in case of emergency situations. Industrial handles are bolted into the shield with ballistic grade hardware. Having two hands on the shield enables the user to protect themselves or use the shield as a defense tool as well. The shield can be pivoted to one arm use so that you can use your firearm while still using the shield for coverage. The shield comes in an unassuming gray color with optional custom wording on the front of the shield for an inconspicuous presentation at your facility. PRO Series HG2 Rapid Response Shield Key Specifications Key Features: Dimensions: 18" x 20" Weight: 12.5 lbs Thickness: 0.23" Components: Includes pre-mounted dual grab handles Finish: Durable polyurea coating increases resistance to wear and tear Country of Origin: Proudly made in the U.S.A. Multi-shot rated: Ensures consistent protection across multiple impacts Entire Shield Tested: Including bolts and hardware, for complete reliability Our PRO Series HG2 Shield is engineered to exceed industry standards, providing Level IIIA/HG2 ballistic protection across the entire shield. This includes bolts and all hardware for complete reliability. This shield is multi-shot rated to ensure consistent protection across multiple impacts. Superior Handgun Protection The Caliber Armor PRO Series IIIA-HG2 Shield?is rigorously tested to provide Level IIIA/HG2 protection with enhanced special threats. Our testing ensures comprehensive performance, meeting or exceeding NIJ standards and covering a range of special threats including: 9mm FMJ?and?LCD .44 Magnum JHP?and?SJHP .357 SIG .45 ACP FN 5.7x28mm SS197 7.62x25 Tokarev 85gr FMJ *This Caliber Armor ballistic shield is fully compliant with Texas House Bill 33 (“Uvalde Strong Act”) school safety requirements. For details, specifications, or purchasing questions, please contact our team at sales@caliberarmor.com. Proven Performance with Industry-Leading Testing Caliber Armor prioritizes both performance and reliability. Therefore, each shield is tested to ensure it meets or exceeds industry standards. The?PRO Series IIIA-HG2 Shield?complies with NIJ Level IIIA and HG2 standards, offering dependable protection against multiple handgun threats. Caliber Armor Ballistic Resistance Testing: Testing occurs indoors under carefully controlled conditions, following the guidelines of: NIJ-STD-0101.06, NIJ-STD-0101.07 HG2, and Special Threats Testing Protocols Include:? Rounds: .44 Magnum SJHP, .357 SIG, 9mm FMJ Special Threats: .357 Magnum 158gr JSP, .44 Magnum 240gr SWCG, FN 5.7x28mm SS197, and others. QUALITY STANDARDS Caliber Armor follows a rigorous quality management system to meet high industry standards. Every product undergoes extensive testing in accredited ballistic labs to ensure full compliance with industry standards.

Features Heavy Duty nylon reinforcement at high wear areas Elastic cummerbund with integrated mag/radio/tourniquet holders 8" x 3" loop ID panels on front and back Imported Specifications Size: : Adjustable sizing from 34" - 48" waist size (measurement around navel)  Armor Sizing: Accepts 10" x 12" Caliber X Level IIIA soft armor Available in: Black 

Product Features:  Soft Body Armor Panel for Viktos Backpacks (insert ONLY does NOT come with backpack) Lightweight CaliberX™ inserts 1/4" thin Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 HG2 Water Resistant Cover Interior sewn together for longevity Proudly Made in the U.S.A Caliber Armor manufacturers our CaliberX™ Soft Ballistic Body Armor line of body armor inserts in our facility in Louisville, Kentucky. We have created an affordable soft armor system that meets the gold standard of 1.1 lb per sqft areal density. At Caliber Armor we are always innovating and improving our armor products. During testing we found that we were able to achieve a better preforming armor layup using a hybrid of both UHMWPE and Para-Aramid materials. We have fully maximized this material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of advanced fabric. The material absorbs and disperses the energy of the impact to underlying layers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing. NIJ STANDARD-0101.06 and 0101.07 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2

Product Features:  Soft Body Armor Panel for Vertx Backpacks (insert ONLY does NOT come with backpack) Lightweight CaliberX™ inserts 1/4" thin Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 HG2 Water Resistant Cover Interior sewn together for longevity Proudly Made in the U.S.A Caliber Armor manufacturers our CaliberX™ Soft Ballistic Body Armor line of body armor inserts in our facility in Louisville, Kentucky. We have created an affordable soft armor system that meets the gold standard of 1.1 lb per sqft areal density. At Caliber Armor we are always innovating and improving our armor products. During testing we found that we were able to achieve a better preforming armor layup using a hybrid of both UHMWPE and Para-Aramid materials. We have fully maximized this material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of advanced fabric. The material absorbs and disperses the energy of the impact to underlying layers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing. NIJ STANDARD-0101.06 and 0101.07 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2

As we navigate an ever-changing world, we have received numerous requests from our customers for backpack panels that fit various styles of backpacks. We have listened to your feedback and are pleased to announce that we now offer a wide range of backpack panels. If you do not see your specific backpack listed, please feel free to contact us with your backpack dimensions, and we will be happy to create a custom backpack panel tailored to your needs.  Features: Lightweight Soft Body Armor Panel Made with domestic UHMWPE/Para-Aramid Hybrid materials and only 1/4 thin Custom sizes available email sales@caliberarmor.com Rated and tested to stop handgun rounds: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 HG2 Water resistant cover Interior sewn together for longevity TSA Approved Proudly made in the U.S.A Caliber Armor manufacturers our CaliberX™ Soft Ballistic Body Armor line of body armor inserts in our facility in Louisville, Kentucky. We have created an affordable soft armor system that meets the gold standard of 1 lb per sqft areal density. At Caliber Armor we are always innovating and improving our armor products. During testing we found that we were able to achieve a better preforming armor layup using a hybrid of both UHMWPE and Para-Aramid materials. We have fully maximized this material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of advanced fabric. The material absorbs and disperses the energy of the impact to underlying layers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing. NIJ STANDARD-0101.06 and 0101.07 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2 

Product Features:  Soft Body Armor Panel for Lyxn Backpacks (insert ONLY does NOT come with backpack) Lightweight CaliberX™ inserts 1/4" thin Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 HG2 Water Resistant Cover Interior sewn together for longevity Proudly Made in the U.S.A Caliber Armor manufacturers our CaliberX™ Soft Ballistic Body Armor line of body armor inserts in our facility in Louisville, Kentucky. We have created an affordable soft armor system that meets the gold standard of 1.1 lb per sqft areal density. At Caliber Armor we are always innovating and improving our armor products. During testing we found that we were able to achieve a better preforming armor layup using a hybrid of both UHMWPE and Para-Aramid materials. We have fully maximized this material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of advanced fabric. The material absorbs and disperses the energy of the impact to underlying layers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing. NIJ STANDARD-0101.06 and 0101.07 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2

Product Features:  Soft Body Armor Panel for Haley Strategic Backpacks (insert ONLY does NOT come with backpack) Lightweight CaliberX™ inserts 1/4" thin Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 HG2 Water Resistant Cover Interior sewn together for longevity Proudly Made in the U.S.A Caliber Armor manufacturers our CaliberX™ Soft Ballistic Body Armor line of body armor inserts in our facility in Louisville, Kentucky. We have created an affordable soft armor system that meets the gold standard of 1.1 lb per sqft areal density. At Caliber Armor we are always innovating and improving our armor products. During testing we found that we were able to achieve a better preforming armor layup using a hybrid of both UHMWPE and Para-Aramid materials. We have fully maximized this material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of advanced fabric. The material absorbs and disperses the energy of the impact to underlying layers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing. NIJ STANDARD-0101.06 and 0101.07 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2

Product Features:  Soft Body Armor Panel for Eberlestock Backpacks (insert ONLY does NOT come with backpack) Lightweight CaliberX™ inserts 1/4" thin Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 HG2 Water Resistant Cover Interior sewn together for longevity Proudly Made in the U.S.A Caliber Armor manufacturers our CaliberX™ Soft Ballistic Body Armor line of body armor inserts in our facility in Louisville, Kentucky. We have created an affordable soft armor system that meets the gold standard of 1.1 lb per sqft areal density. At Caliber Armor we are always innovating and improving our armor products. During testing we found that we were able to achieve a better preforming armor layup using a hybrid of both UHMWPE and Para-Aramid materials. We have fully maximized this material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of advanced fabric. The material absorbs and disperses the energy of the impact to underlying layers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing. NIJ STANDARD-0101.06 and 0101.07 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2

Product Features:  Soft Body Armor Panel for 5.11 Tactical Backpacks (insert ONLY does NOT come with backpack) Lightweight CaliberX™ inserts 1/4" thin Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 HG2 Water Resistant Cover Interior sewn together for longevity Proudly Made in the U.S.A Caliber Armor manufacturers our CaliberX™ Soft Ballistic Body Armor line of body armor inserts in our facility in Louisville, Kentucky. We have created an affordable soft armor system that meets the gold standard of 1.1 lb per sqft areal density. At Caliber Armor we are always innovating and improving our armor products. During testing we found that we were able to achieve a better preforming armor layup using a hybrid of both UHMWPE and Para-Aramid materials. We have fully maximized this material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of advanced fabric. The material absorbs and disperses the energy of the impact to underlying layers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing. NIJ STANDARD-0101.06 and 0101.07 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2

Elevate your gear and make a statement with our Caliber Armor Morale Patch. This patch is more than just an accessory; it's a symbol of unwavering protection and commitment to safety.  Key Features: Premium Quality: Crafted with precision and attention to detail, our morale patch is made to last, featuring vibrant and enduring colors. Guardian Shield Design: The patch showcases a striking Guardian Shield design, symbolizing the shield of protection that Caliber Armor offers to its wearers. Hook Backing: With a convenient hook backing, it's easy to attach this patch to your tactical gear, backpack, or any clothing that has loop material.  Show Your Allegiance: Whether you're a first responder, military personnel, or a safety-conscious individual, proudly display your allegiance to Caliber Armor's commitment to security and protection. Collectible: Add this unique patch to your collection of morale patches, showcasing your dedication to safety and your appreciation for quality gear. Embrace the Caliber Armor ethos of safety and preparedness with our Caliber Armor Morale Patch. It's more than a patch; it's a symbol of your dedication to safety and the peace of mind that comes with it. Attach it to your gear and wear it proudly

Caliber Armor Decal is a great way to show your support!