Ballistic Plates Level 3

SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III Body Armor Essential protection ought to be affordable and reliable, which is why AR500 Armor is proud to offer one of the most cost-effective plates on the market with our Steel Level III (specifications below): An AR500 Steel plate, cut in our patented Advanced Shooters Cut shape and design, and covered with an exclusive FragLock™ Coat, in Base and Build-Up forms.  Our Level III Steel, unlike ceramic or polyethylene alternatives, is capable of protecting against several direct hits while still being less bulky than competing materials. It also has been independently tested in accordance with NIJ 0101.06 threat levels through Oregon Ballistics (OBL), and H.P. White Laboratories. This means it is rated to stop 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS, and special threat tested to stop 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS. A benefit not elsewhere found in the industry, the Advanced Shooters Cut shape affords you additional room for your rifle stock, improving comfort and shooting ergonomics; this is available in right and left-handed configurations. It is also compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor, given there is an appropriately sized chest plate pocket. Finally, the FragLock™ Coat is a unique feature that guarantees two benefits: First, it gives a twenty-year maintenance-free shelf life - making this steel plate far outlast ceramic or polyethylene alternatives. Second, the coating mitigates the dangers of spalling (when pieces of steel fragment off) and fragmentation (when the bullet’s remains fragment off), protecting the wearer from both the direct ballistic impact and the aftermath of the impact. The Build-Up Coat features stronger protection with the tradeoff of greater weight and size, while the Base Coat is lighter and thinner with less protection. SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA   Product Overview  True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.    Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing.   Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.    Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch      SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SHOOTERS CUT SET OF TWO    Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.     Protective Value Added    We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened   Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.   Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.    Laser Cut to Protect Ballistic Integrity   All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Blazing The Trail of Innovation  Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!   Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Plate Weight (per plate):    9.5”x12.5” AR550 Shooters Cut Single Curve Full Coat = 9 lbs 5 oz.    Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness   Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6 oz (base coat), 3lbs 12oz (full coat).    AR550 Body Armor - Shooters Cut Specs:   Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only       See a Comparison of Our Full Line of Body Armor:             Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:       Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.       The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.      

In addition to stopping the 7.62x51 M80 Ball at 2780 FPS, our PE plate has also been Special Threat tested against the following rounds: 5.56x45 M193 at 3150 FPS 7.62x39 AK-47 at 2380 FPS Highlights Peace of mind: Tested to NIJ Standard 0101.06 Level III and is multi-hit capable  Confidence: stops high-velocity military 5.56 and .30 caliber ammunition Safety: At 3.5 pounds, our PE plate is neutrally buoyant Specifications Tested to Level III threats 10”x12” plate weighs only 3.5 lbs Stand-Alone and Multi-Hit capable 1” Thick Profile Ergonomic Multiple Axis Curvature Durable polyurea coating seals out water and the elements Made in our Phoenix, Arizona, facility AR500 Armor Level III Lightweight UHMWPE Body Armor 10" x 12" There is a saying in the backpacking community, “take care of the ounces, and the pounds will take care of themselves.” When weight and mobility are everything in your body armor, the AR500 Armor® Level III ultra-high molecular weight polyethylene plate is the clear choice. Ultra-light Level III protection Our UHMWPE (aka PE) plate weighs a mere 3.5 pounds in our 10”x12” standard shooters cut. This stand-alone plate is tested to NIJ 0101.06 Level III threats and is multi-hit capable. It is manufactured in Phoenix, Arizona, and carries a 5-year shelf life. Our new PE lightweight armor plate is a great choice for those whose primary concern is weight.  In addition to stopping the 7.62x51 M80 Ball at 2780 FPS, our PE plate has also been Special Threat tested against the following rounds: 5.56x45 M193 at 3150 FPS 7.62x39 AK-47 at 2380 FPS Highlights Peace of mind: Tested to NIJ Standard 0101.06 Level III and is multi-hit capable  Confidence: stops high-velocity military 5.56 and .30 caliber ammunition Safety: At 3.5 pounds, our PE plate is neutrally buoyant Specifications Tested to Level III threats 10”x12” plate weighs only 3.5 lbs Stand-Alone and Multi-Hit capable 1” Thick Profile Ergonomic Multiple Axis Curvature Durable polyurea coating seals out water and the elements Made in our Phoenix, Arizona, facility Note: Due to its size and profile, this plate currently fits in our Testudo Gen 2.0 and AR Independence carriers only.

SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III Body Armor With Build Up Coat Essential protection ought to be affordable and reliable, which is why AR500 Armor is proud to offer one of the most cost-effective plates on the market with our Steel Level III (specifications below): An AR500 Steel plate, cut in our patented Advanced Shooters Cut shape and design, and covered with an exclusive FragLock™ Coat, in Base and Build-Up forms.  Our Level III Steel, unlike ceramic or polyethylene alternatives, is capable of protecting against several direct hits while still being less bulky than competing materials. It also has been independently tested in accordance with NIJ 0101.06 threat levels through Oregon Ballistics (OBL), and H.P. White Laboratories. This means it is rated to stop 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS, and special threat tested to stop 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS. A benefit not elsewhere found in the industry, the Advanced Shooters Cut shape affords you additional room for your rifle stock, improving comfort and shooting ergonomics; this is available in right and left-handed configurations. It is also compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor, given there is an appropriately sized chest plate pocket. Finally, the FragLock™ Coat is a unique feature that guarantees two benefits: First, it gives a twenty-year maintenance-free shelf life - making this steel plate far outlast ceramic or polyethylene alternatives. Second, the coating mitigates the dangers of spalling (when pieces of steel fragment off) and fragmentation (when the bullet’s remains fragment off), protecting the wearer from both the direct ballistic impact and the aftermath of the impact. The Build-Up Coat features stronger protection with the tradeoff of greater weight and size, while the Base Coat is lighter and thinner with less protection. SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

Highlights NIJ Level III Certified AR500 Steel Construction Polyurea Coated Stand Alone 5 Year Warranty Black What’s Included 1 Level III Steel Plate Specifications 10” X 12”  Thinness: .35” Shooters Cut Weighs 7.5 lbs Full Cut Weighs 8.7 lbs Level III Steel Plate This is our Level III NIJ Certified Steel Armor Plate. Easily fitting into any of our Plate Carriers this plate is constructed of high-carbon AR500 Steel and treated with our Polyurea Blast Coating to prevent spalling. We offer two different cut options to optimize coverage and performance based on your needs. Add this plate to maximize your ballistic package! Highlights NIJ Level III Certified AR500 Steel Construction Polyurea Coated Stand Alone 5 Year Warranty Black What’s Included 1 Level III Steel Plate Specifications 10” X 12”  Thinness: .35” Shooters Cut Weighs 7.5 lbs Full Cut Weighs 8.7 lbs  

Made in the USA: Ensures that the product is made with the highest standards. Multiple hit capability: Protection against multiple impacts, allowing for quick and easy plate replacement in the field. Rated for up to six hits from 7.62 Nato bullets: Protection against a wide range of high-powered rifle rounds, providing peace of mind in the field. Passed NIJ 0101.06 6 shot stand alone tests: Rigorously tested and proven to protect against a wide range of high-powered rifle rounds. Laser cut for precision: Tailored to fit your body and provide maximum coverage. Your choice of Level III AR500 or Lightweight Level III+ steel core armor plates. Tactical Scorpion Gear AR500 steel core armor (Made in the USA) A stand alone armor plate with multiple hit capability, which means that you'll be protected from multiple impacts and the plate can be quickly and easily swapped out to get you back in the fight ASAP. Manufactured from certified AR-500 steel with a Brinnell Hardness Rating of 505-518BHN, which ensures that the plate is durable and can withstand heavy use. Laser cut for precision, which ensures that the plate is tailored to fit your body and provide maximum coverage. Fully tested by independent lab, which means that the plate has been evaluated for performance and quality by experts in the field. Rated for up to six hits from 7.62 Nato bullets (.308 Winchester) with velocities up to 2780 fps, which means that the plate can protect you from a wide range of high-powered rifle rounds, providing you with the peace of mind that you need in the field. Tactical Scorpion Gear Level III+ steel plate armor (Made in the USA) Our armor plates comply with all NIJ standards, ensuring that you receive top quality products at an unbeatable price. A stand alone armor plate with multiple hit capability, which means that you'll be protected from multiple impacts and the plate can be quickly and easily swapped out to get you back in the fight ASAP. Passed NIJ 0101.06 6 shot stand alone tests against 5.56 M855 M80 ball (greentip) at 2800fps and 5.56 M193 55 Grain FMJ at 2900fps, and in-house testing defeated 30-06 165 grain copper tip trophy, which means that the plate has been rigorously tested and proven to protect against a wide range of high-powered rifle rounds, providing you with the peace of mind that you need in the field. Listed on the Department of Justice NIJ certification website, which means that the plate is recognized as meeting the highest standards for ballistic resistance by the government. Level 3+ plates are manufactured from a proprietary steel reaching Brinnell Hardness ratings in 600 - 630, which ensures that the plate is durable and can withstand heavy use. Laser cut for precision, which ensures that the plate is tailored to fit your body and provide maximum coverage. Simply Stronger, Thinner and lighter than the competition, which means that you'll have the protection you need without the added weight or bulk, allowing you to move freely and easily in the field. By using our new proprietary steel core, you will be getting a plate that is far stronger than traditional AR500 - AR650 steel cores. Unlike the traditional cores, our core is hardened all the way through, making it 20% lighter and superior in strength. With our plates, you can move freely and with confidence, knowing that you have the best protection. Our build-up spall coating, done with the Graco EXP-2, which is the top of the line high pressure heated coating system, ensures that you will be protected from any shrapnel that may escape from the armored assembly when hit. The plate core is chemically washed and etched on the strike surface to eliminate the coating from delaminating when shot, giving you an added layer of safety. Tactical Scorpion Gear 10 mm Trauma Pad Custom made to fit our armor plate perfectly, using a computer cut on a triple axis CNC router machine. Will absorb the impact of any projectile, protecting your ribs from compression, giving you an added layer of safety and comfort. ** This model complies with NIJ Standard-0101.06 for Ballistic resistance of Body Armor.** At Tactical Scorpion Gear, we use CNC laser cutting table to cut all our Steel core products, ensuring precision, accuracy and perfect fit of the plate to your body, providing maximum coverage and protection. We don't settle for other inferior cutting methods like plasma cutting that can generate excessive heat, causing damage to the plate, and can cause the edges to soften. This can lead to chipping, damage, and even shattering when hit. We manufacture all our vest carriers, Kevlar level IIIA vests and all our products in-house, ensuring their availability and quick shipping. Trust us to provide you top-quality, durable and reliable products. Tested by HP White laboratory ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NIJ tested Level III Armor will defeat 6 rifles round shots up to 7.6251/.308 @ 2780 ft/s @ 15 METERS Level III+ lightweight base coated Plate Size Weight (pounds) Weight (kilograms) 6x6 2.08 0.93 6x8 2.75 1.25 8x10 4.4 1.98 10x12 6.45 2.93 10x12 modified 5.5 2.49 11x14 8.74 3.91 Level III AR500 base coated Plate Size Weight (pounds) Weight (kilograms) 6x6 2.67 1.21 6x8 3.32 1.51 8x10 5.17 2.35 10x12 7.82 3.56 10x12 modified 7.24 3.28 11x14 11.24 5.11 Level III+ lightweight spall coated Plate Size Weight (pounds) Weight (kilograms) 6x6 2.44 1.1 6x8 3.25 1.47 8x10 5 2.27 10x12 7.5 3.4 10x12 modified 6.75 3.06 11x14 9.94 4.53 Level III AR500 spall coated Plate Size Weight (pounds) Weight (kilograms) 6x6 2.94 1.33 6x8 4 1.81 8x10 6.13 2.79 10x12 9.38 4.27

Specifications Stand -Alone Armor System 10” X 12” 3.5 lbs/plate (10”x12”) Ultra High Molecular Weight Polyethylene (UHMWPE) Hybrid Fibers Neutrally buoyant Multi-Shot Rated 1.2” profile Our Proprietary “Encapsaloc” Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Raised and Embedded 3D Spartan Armor Systems® Logo Made in U.S.A. SPARTAN ARMOR SYSTEMS® LEVEL III ELAPHROS SET OF TWO Spartan Armor Systems® Introduces our advanced “Elaphros” (Ultra Light Weight) Level III, Multi-curve, UHMWPE Body Armor. At only 3.5 lbs per plate, this Body Armor is for those that require rifle-rated protection over extended distances without being weighed down. Elaphros lightweight body armor offers NIJ Level III (certified) threat protection at approximately half the weight of most comparable body armor plates. Elaphros body armor is neutrally buoyant and so light that it floats in water! Light, Quick, Agile “Elaphros'' in greek translates to light, quick, agile, and easy to bear. Designed for the operator that requires minimal weight and maximum maneuverability, Eleaphros body armor allows the operator a distinct advantage in a wide range of tactical engagements. Elaphros body armor is NIJ certified to meet or exceed level III requirements under NIJ 0101.06.   Master Crafted, Laboratory Tested Spartan Armor Systems® Elaphros Body Armor Plates are lab tested and certified to meet or exceed ballistic resistance under NIJ-0101.06 Level III specifications. Elaphros body armor plates offer the comfort, reliability, quality, and affordability you’ve come to expect from Spartan Armor Systems®. Constructed with Multiple ply’s of Advanced UHMWPE Hybrid Fibers, Elaphros weighs in at 3.5lbs/per plate while maintaining a sleek 1.2” low profile design that allows the operator maximum mobility and comfort with Level III protection. Our Elaphros Shooters Cut, 10”X12”, multi-curved, UHMWPE body armor was designed in-house by our dedicated team of engineers that have decades of industry experience. These UHMWPE plates were developed using only the highest quality materials, production, and quality assurance standards, providing maximum confidence and supreme coverage for our customers. Next Level Armor Elaphros (Ultra Lightweight) Level III Body Armor Plates are coated/encapsulated with Spartan Armor Systems® proprietary “Encapsaloc” Polyurea Coating. Protecting the plate from water, contaminants, and daily wear and tear. Taking great pride in every piece of armor Spartan Armor Systems® produces, the raised 3D Spartan Armor Systems® logos is a symbol of our exceptionally high-quality standards and pride. If that weren’t enough, we provide a 5-year warranty and a 5-year shelf life with our Elaphros UHMWPE Body Armor! Specifications Stand -Alone Armor System 10” X 12” 3.5 lbs/plate (10”x12”) Ultra High Molecular Weight Polyethylene (UHMWPE) Hybrid Fibers Neutrally buoyant Multi-Shot Rated 1.2” profile Our Proprietary “Encapsaloc” Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Raised and Embedded 3D Spartan Armor Systems® Logo Made in U.S.A.

Specifications: Includes 2 Plates NIJ Certified Level III 9.5"x12.5" 4.8 lbs 1.1" thick Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Ballistic Threats Tested:  7.62x39mm M67 (FMJ Ball) 7.62x39mm M43 (MSC) 7.62x51mm (M-80 Ball) 5.56x45mm (M193 Ball) 5.56x45mm (M855/SS109) Spartan Armor Systems Level III+ Composite/Ceramic Multi Curve 10"x12" Set of Two At only 4.8 lbs this is our lightest level III+ body armor plate we've ever offered. This stand-alone composite/ceramic body armor is multi-hit rated and special threat validated against high velocity rounds such as SS109/M855. The combination of multi curve design and light weight makes this armor comfortable and easy to wear for for extended periods of time. Each plate measures 9.5"x12.5" inches and is only 1.1" inches thick  Specifications: Includes 2 Plates NIJ Certified Level III 9.5"x12.5" 4.8 lbs 1.1" thick Polyurea Coating Multi-Curve Ergonomic Design Stab Resistant Ballistic Threats Tested:  7.62x39mm M67 (FMJ Ball) 7.62x39mm M43 (MSC) 7.62x51mm (M-80 Ball) 5.56x45mm (M193 Ball) 5.56x45mm (M855/SS109) Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited. The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.  

Sentinel Legion XL Plate Carrier Specs:  Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Elevated Mesh Allowing For Extreme Breathability  Holds 11"X14" Front And Back Plates Removable Cummerbund With Side Plate Pockets For 6"X6" And 6"X8" Armor Velcro In Front Of The Carrier Is 8"x4" With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9x3 Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 3lbs. 9oz. Shooters Cut Plate Weight (per plate):. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side Plate Weight (per plate):     6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat) 6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat) AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only SPARTAN ARMOR SYSTEMS® SENTINEL LEGION XL PLATE CARRIER  The Spartan Armor Systems® Legion XL Plate Carrier is rugged, reliable, and fully adjustable from 2XL-4XL. Designed to hold our 11”x14” body armor plates, the Legion XL can also accommodate 6”x6” or 6”x8” side plates for additional protection and features a completely removable cummerbund. Developed For You Born of numerous customer inquiries and feedback, we developed the Sentinel Legion XL Plate Carrier to be adjustable from a 2XL-4XL size. The Sentinel Legion XL weighs in at approximately 3lbs. 9oz., will hold our Steel Core AR500 Omega and AR550 11”x14” body armor plates, while also offering the option to add in 6"x6" or 6"x8" side plates. If you don't want to run the Sentinel Legion XL with the cummerbund - no sweat! The cummerbund is easily removable so you can run your plate carrier with just the front and back plates or the full set-up with side plates. Comfort And Convenience The Spartan Armor Systems® Legion XL Plate Carrier includes features designed for customization, modularity, and comfort while affording supreme protection in the field. Anti-slip shoulder padding with velcro, side release buckles on the waist strap, and elevated mesh for breathability make this one big, bad, carrier.  Sentinel Legion XL Plate Carrier Specs:  Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Elevated Mesh Allowing For Extreme Breathability  Holds 11"X14" Front And Back Plates Removable Cummerbund With Side Plate Pockets For 6"X6" And 6"X8" Armor Velcro In Front Of The Carrier Is 8"x4" With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9x3 Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 3lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates. SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.  Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process. Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo. IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation. Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Shooters Cut Plate Weight (per plate):. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness   Side Plate Weight (per plate):     6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat) 6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat)   AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor: Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.  

SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER   Product Overview The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.  Ready For Anything Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike. Spartan Armor Systems® Sentinel Plate Carrier Specs: Adjustable from 38" To 48" Chest Size Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Padded Mesh Separators For The Interior Of The Carrier For Breathability Fits 10" X 12" Shooters Cut Plates Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9” X 3” Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 2lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates. SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO   Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Shooters Cut Plate Weight (per plate):. 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. or Full Coat 8lbs 10oz. Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness   Side Plate Weight (per plate):     6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat) 6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat).   AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.        

FEATURES: Maxx-Dri Technology offers 100% breathability compared to traditional PCs Ultra Lightweight Ultra Fast Donning and Doffing Ideal for donning over a Police Uniform Lightning Fast Infinity Adjustment System for a truly Custom Fit Anti-Gravity weight management technology Heavy Duty Mil-spec construction Heavy Duty Genuine YKK buckles and straps Molle and Velcro Molle front and rear Front Velcro for ID patches Heavy Duty Rear Drag/Rescue Handle Available with rifle and pistol mag pouches and pistol holster (chest) (2) LEVEL 3+ AR550 10x12 Shooters Cut Plates This plate carrier was designed by 221B Tactical SIZING: One Size Fits All (Adjustable Heavy Duty Genuine YKK Side Release Buckles and Straps) Spartan Armor AR550 Level III+ Body Armor and 221B Tactical Phantom Plate Carrier Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.  Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection. FEATURES: Maxx-Dri Technology offers 100% breathability compared to traditional PCs Ultra Lightweight Ultra Fast Donning and Doffing Ideal for donning over a Police Uniform Lightning Fast Infinity Adjustment System for a truly Custom Fit Anti-Gravity weight management technology Heavy Duty Mil-spec construction Heavy Duty Genuine YKK buckles and straps Molle and Velcro Molle front and rear Front Velcro for ID patches Heavy Duty Rear Drag/Rescue Handle Available with rifle and pistol mag pouches and pistol holster (chest) (2) LEVEL 3+ AR550 10x12 Shooters Cut Plates This plate carrier was designed by 221B Tactical SIZING: One Size Fits All (Adjustable Heavy Duty Genuine YKK Side Release Buckles and Straps)

Spartan AR550 Body Armor and Sentinel Plate Carrier Package Fits 38" to 48" chest size Durable emergency drag handle Anti-Slip shoulder padding w/ velcro Side release buckles on internal waist strap Padded mesh separators for the interior of carrier for breathability Removable cummerbund with side plate pockets for 6x6 and 6x8 side plate armor NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates! Velcro in front of the Carrier is 8x4 Velcro on the back of the Carrier is 9x3 Stronger carrier material that can withstand through wear and tear over a long period of time 1000 denier Bottom loading By purchasing you will receive: Set of Two 10x12 AR550 Body Armor Single Curve, Full Coat Set of Two AR550 Side Plates Base Coat One Sentinel Plate Carrier (your choice in color) Level III+ Side Plates:   6″ x 6″  Chest Plate Weight (per plate):   10x12 AR550 Shooters Cut Full Coat: 8lbs 10oz. Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat) Thickness:   .25″ AR550 Spartan Armor Systems AR550 Level III+ Armor NIJ Certified with Spartan Sentinel Plate Carrier Package includes both front and back AR550 shooters cut steel armor plates with a single curve, with full coat of Encapsuloc™ anti-fragmentation coating, two 6x6 side plates (base coat) and Spartan Sentinel Plate Carrier. Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection. Spartan AR550 Body Armor and Sentinel Plate Carrier Package Fits 38" to 48" chest size Durable emergency drag handle Anti-Slip shoulder padding w/ velcro Side release buckles on internal waist strap Padded mesh separators for the interior of carrier for breathability Removable cummerbund with side plate pockets for 6x6 and 6x8 side plate armor NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates! Velcro in front of the Carrier is 8x4 Velcro on the back of the Carrier is 9x3 Stronger carrier material that can withstand through wear and tear over a long period of time 1000 denier Bottom loading By purchasing you will receive: Set of Two 10x12 AR550 Body Armor Single Curve, Full Coat Set of Two AR550 Side Plates Base Coat One Sentinel Plate Carrier (your choice in color) Buy Body Armor - Level III+ Spartan AR550 Armor We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor!  With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated! Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates. Note: AR550 side plates are NIJ compliant, are not NIJ certified.  Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our  ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Level III+ Side Plates:   6″ x 6″  Chest Plate Weight (per plate):   10x12 AR550 Shooters Cut Full Coat: 8lbs 10oz. Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat) Thickness:   .25″ AR550

Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA Predator Armor Level III+ Shooters Cut Predator Armor Level III+ Body Armor is manufactured in the U.S. using ballistic grade steel and has the option for a kevlar lined spall and fragmentation protective layer. Our plates use a unique heat-treating, quenching and tempering process that results in an extra hardened steel. Predator Armor plates are lightweight, impact-resistant steel that hold superior ballistic properties. This allows us to use thinner plates without sacrificing protection levels. All of our plates come with a base coat that aesthetically enhances the plate as well as provides durable characteristics. This coating does not provide fragmentation mitigation. You have the option to add kevlar lining to your plate. This provides anti spall and frag characteristics. It also enhances the performance of your plate. If your carrier does not have anti frag characteristics it is strongly advised to include the kevlar lining. Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA

Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA Predator Armor Level III Shooters Cut Predator Armor Level III Body Armor is manufactured in the U.S. using ballistic grade steel and has the option for a kevlar lined spall and fragmentation protective layer. Our plates use a unique heat-treating, quenching and tempering process that results in an extra hardened steel. Predator Armor plates are lightweight, impact-resistant steel that hold superior ballistic properties. This allows us to use thinner plates without sacrificing protection levels.  Our ballistic steel plate is tested to NIJ standards. All of our plates come with a base coat that aesthetically enhances the plate as well as provides durable characteristics. This coating does not provide fragmentation mitigation. You have the option to add kevlar lining to your plate. This provides anti spall and frag characteristics. It also enhances the performance of your plate. If your carrier does not have anti frag characteristics it is strongly advised to include the kevlar lining. Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA Our Testing Target is a smaller cut from the same material as the Level III Plates. It is an add on item you can order with your plates and test the body armor out for yourself. We guarantee our plates will meet the Level III standards. Add a test plate to your order and try it yourself. If it does not meet the standards we will refund your order.

SPECIFICATIONS Material: Ballistic steel of 650 hardness on the Brinell scale, with FragLock™ Coating Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10"x12" Base Coat Weight: 8 lbs Thickness: 0.31" Build-Up Coat Weight: 9.5 lbs Thickness: 0.56" 11”x14” Base Coat Weight: 10 lbs Thickness: 0.31" Build-Up Coat Weight: 11.5 lbs Thickness: 0.56" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III+ Body Armor The Level III+ Steel Plate (specifications below) is able to stop threats such as 7.62x39/7.62x51/5.56 M193s, 5.56 M855 penetrators, and .223/.308 WIN rounds. And unlike ceramic or polyethylene, Steel is able to take several hits from these rounds without fail. This multi-hit special threat resistance is the distinguishing quality of the Level III Plus. The plate features our patented Advanced Shooter Cut, which improves comfort and shooting ergonomics by affording you extra room for your rifle cut. It is available in both right and left-handed versions and is compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor (given you have an appropriate carrier size).  The included FragLock™ Coat is a feature special to our AR500 Armor plates, which we apply for two reasons: First, it helps reduce the dangers of spalling (when broken pieces of steel come off the plate) and fragmentation (when a bullet’s remains bounce off the plate), protecting you from the aftermath of a bullet’s impact once it has been stopped. Second, the coat gives our plates a maintenance-free shelf life of twenty years, which makes this steel plate last much longer than polyethylene or ceramic alternatives. The Base Coat, which all our plates come with by default, is lighter and thinner with less protection, while the Build-Up Coat can be added for greater protection but also slightly more weight. SPECIFICATIONS Material: Ballistic steel of 650 hardness on the Brinell scale, with FragLock™ Coating Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10"x12" Base Coat Weight: 8 lbs Thickness: 0.31" Build-Up Coat Weight: 9.5 lbs Thickness: 0.56" 11”x14” Base Coat Weight: 10 lbs Thickness: 0.31" Build-Up Coat Weight: 11.5 lbs Thickness: 0.56" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

SPECIFICATIONS Material: Ballistic steel of 650 hardness on the Brinell scale, with FragLock™ Coating Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10"x12" Base Coat Weight: 8 lbs Thickness: 0.31" Build-Up Coat Weight: 9.5 lbs Thickness: 0.56" 11”x14” Base Coat Weight: 10 lbs Thickness: 0.31" Build-Up Coat Weight: 11.5 lbs Thickness: 0.56" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III+ Body Armor With Build Up Coat The Level III+ Steel Plate (specifications below) is able to stop threats such as 7.62x39/7.62x51/5.56 M193s, 5.56 M855 penetrators, and .223/.308 WIN rounds. And unlike ceramic or polyethylene, Steel is able to take several hits from these rounds without fail. This multi-hit special threat resistance is the distinguishing quality of the Level III Plus. The plate features our patented Advanced Shooter Cut, which improves comfort and shooting ergonomics by affording you extra room for your rifle cut. It is available in both right and left-handed versions and is compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor (given you have an appropriate carrier size).  The included FragLock™ Coat is a feature special to our AR500 Armor plates, which we apply for two reasons: First, it helps reduce the dangers of spalling (when broken pieces of steel come off the plate) and fragmentation (when a bullet’s remains bounce off the plate), protecting you from the aftermath of a bullet’s impact once it has been stopped. Second, the coat gives our plates a maintenance-free shelf life of twenty years, which makes this steel plate last much longer than polyethylene or ceramic alternatives. The Base Coat, which all our plates come with by default, is lighter and thinner with less protection, while the Build-Up Coat can be added for greater protection but also slightly more weight. SPECIFICATIONS Material: Ballistic steel of 650 hardness on the Brinell scale, with FragLock™ Coating Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10"x12" Base Coat Weight: 8 lbs Thickness: 0.31" Build-Up Coat Weight: 9.5 lbs Thickness: 0.56" 11”x14” Base Coat Weight: 10 lbs Thickness: 0.31" Build-Up Coat Weight: 11.5 lbs Thickness: 0.56" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

Highlights NIJ Certified Level III+ Made with Ceramic and UHMWPE Materials User-Friendly Design Stress Fracture Resistant Fully Sealed Stand Alone Single Curve What’s Included 1 Level III+ Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 4.3 Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs Level III+ Lightweight Poly Plate This is our lightweight and durable Ultra High Molecular Weight Polyethylene (UHMWPE), NIJ Certified Level III+ Single Curve Plate. Made with UHMWPE fabrics, ceramics and special pressing techniques the single curve design fits to the body for maximum safety and comfort for a lighter, thinner, high performing plate. Rugged, reliable, and stress fracture resistant our plates are also fully sealed with Polyurea to protect against liquids, chemicals and harsh elements. Highlights NIJ Certified Level III+ Made with Ceramic and UHMWPE Materials User-Friendly Design Stress Fracture Resistant Fully Sealed Stand Alone Single Curve What’s Included 1 Level III+ Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 4.3 Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs

Highlights NIJ Level III+ 10 Year warranty Maximum Durability Multi-Hit Capability Single curve Black Whats Included 1 Level III+ Steel Plate Specifications 6.9 lbs. Each 13/64 or 5mm Thickness 10” x 12” Level III+ Steel Plate This is our NIJ Certified Level III+ Steel Hard Armor plate. This plate is capable of stopping all types of handgun rounds, 5.56mm x 45mm and even up to 7.62mm x 51mm (.308). This is one of our top selling Steel Plate options and is always in stock for expedited shipping. Compatible with all of our Tactical Armor and a number of our Concealable Vests as well this plate is a great addition for increased protection or as a stand alone in one of our Carriers.  Highlights NIJ Level III+ 10 Year warranty Maximum Durability Multi-Hit Capability Single curve Black Whats Included 1 Level III+ Steel Plate Specifications 6.9 lbs. Each 13/64 or 5mm Thickness 10” x 12”

Highlights NIJ Certified Level III UHMWPE Material Construction Fully Sealed Stand Alone Multi Curve Stress Fracture Resistant Light Weight User Friendly Design Special Threat Performance 7.62 x 39mm, 123gr, FMJ 5.56 x 45mm, 55gr M193 Ball Whats Included 1 Level III Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 3.2 Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs Level III Lightweight Poly Plate This is our Level III Polyethylene Plate. This stand alone Ultra High Molecular Weight Polyethylene (UHMWPE) Plate is lightweight, durable, and easily fits into our plate carriers and vests. The Multi Curve design fits to the contours of the body for maximum safety and comfort while maintaining peak performance in the field. This ultra light weight plate is  meant to increase your ballistic coverage with out weighing you down! Highlights NIJ Certified Level III UHMWPE Material Construction Fully Sealed Stand Alone Multi Curve Stress Fracture Resistant Light Weight User Friendly Design Special Threat Performance 7.62 x 39mm, 123gr, FMJ 5.56 x 45mm, 55gr M193 Ball Whats Included 1 Level III Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 3.2 Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs

Features of Level III ICW Lightweight Plate Made with UHMWPE fabrics and special pressing techniques to create a lighter and thinner plate NIJ 0101.06 Level III In-Conjunction with Level IIIA Light Soft Armor Multi Curve design fits to the contours of the body for maximum safety and comfort Rugged, reliable, and stress fracture resistant Fully sealed with Polyurea to protect against liquids, chemicals and harsh elements Special Threats: 7.62 x 39mm, PS Ball (MSC) 5.56 x 45mm, 55gr M193 Ball Specifications: NIJ Level III ICW IIIA Multi Curve Size 10” x 12” Weight (lbs): 2.4 Thickness: (in): 0.60 Tolerences: +/_ .25” - +/_ 0.25 lbs WHAT IS INCLUDED: 1 Qty. Level III ICW Plate Level III ICW Lightweight Plate Introducing our Lightweight and Durable Ultra High Molecular Weight Polyethylene (UHMWPE), NIJ 0101.06 Level III In-Conjunction with IIIA, Multi Curve plate. Features of Level III ICW Lightweight Plate Made with UHMWPE fabrics and special pressing techniques to create a lighter and thinner plate NIJ 0101.06 Level III In-Conjunction with Level IIIA Light Soft Armor Multi Curve design fits to the contours of the body for maximum safety and comfort Rugged, reliable, and stress fracture resistant Fully sealed with Polyurea to protect against liquids, chemicals and harsh elements Special Threats: 7.62 x 39mm, PS Ball (MSC) 5.56 x 45mm, 55gr M193 Ball Specifications: NIJ Level III ICW IIIA Multi Curve Size 10” x 12” Weight (lbs): 2.4 Thickness: (in): 0.60 Tolerences: +/_ .25” - +/_ 0.25 lbs WHAT IS INCLUDED: 1 Qty. Level III ICW Plate

Highlights Made with UHMWPE fabrics and special pressingtechniques to create a lighter and thinner plate NIJ 0101.06 Certified Level III User-friendly design fits to the contours of the body for maximum safety and comfort Rugged, reliable, and stress fracture resistant Fully sealed with polyurea to protect against the hard elements Special Threat Performance 7.62 x 51 M80 (NIJ III) 7.62 x 39 PS BALL (MSC) 5.56 x 45 M855 (GREEN TIP) Whats Included 1 Level III Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 4.8lbs Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs Level III+ Lightweight Poly Plate Limited Edition This is our Limited Edition Level III Polyethylene Plate that is sealed with Polyurea. This Polyurea is a Limited Edition application to our Poly plates. This stand alone Ultra High Molecular Weight Polyethylene (UHMWPE) Plate is lightweight, durable, and easily fits into our plate carriers and vests. The Multi Curve design fits to the contours of the body for maximum safety and comfort while maintaining peak performance in the field. This ultra light weight plate is  meant to increase your ballistic coverage with out weighing you down! Highlights Made with UHMWPE fabrics and special pressingtechniques to create a lighter and thinner plate NIJ 0101.06 Certified Level III User-friendly design fits to the contours of the body for maximum safety and comfort Rugged, reliable, and stress fracture resistant Fully sealed with polyurea to protect against the hard elements Special Threat Performance 7.62 x 51 M80 (NIJ III) 7.62 x 39 PS BALL (MSC) 5.56 x 45 M855 (GREEN TIP) Whats Included 1 Level III Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 4.8lbs Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs