All

Lower Back IFAK Refill contents: 1 x CAT TQ 1 x Hyfin compact twin chest seal 1 x H&H Decomp Needle 1 x Celox EMS 1 x Compressed Gauze 1 x NAR Bear Claw Gloves 1 x Responder Bandage 1 x Casualty Card 1 x Trauma Shears 1 x Marker AR500 Armor AR Lower Back Trauma Refill Kit The AR500 LBIFAK Refill is designed to resupply our Lower Back IFAK pouch. Serious contents for serious situations Our LBIFAK Refill is compact and portable. This refill includes the necessary tools to treat life-threatening bleeding wounds such as gunshots, knife/stab wounds, or other serious bleeding injuries including arterial bleeding.  Using Keep It Simple principles we’ve designed this trauma kit for use by anyone with basic knowledge of compressing a wound or using a tourniquet. The chest needle decomp and chest seals provide necessities for advanced users and additional capability. Lower Back IFAK Refill contents: 1 x CAT TQ 1 x Hyfin compact twin chest seal 1 x H&H Decomp Needle 1 x Celox EMS 1 x Compressed Gauze 1 x NAR Bear Claw Gloves 1 x Responder Bandage 1 x Casualty Card 1 x Trauma Shears 1 x Marker

 Highlights: Rugged: front and rear plate pockets made of 500D Cordura® nylon Modular: Six rows of PALS webbing in the front and back, and up to 9 PALS channels on the cummerbund, depending on user-size Expandable: up to 46” cummerbund adjustment Carrier Weight: 1.1 lbs AR500 Armor AR Independence Plate Carrier The new Armored Republic Independence™ plate carrier is 100% made in America with everything you need and nothing you don’t.  No Frills, Full Functionality This no-frills carrier has PALS webbing for your MOLLE-compatible pouches and accessories, and a skeletonized cummerbund to reduce weight. Perfect for those who are looking for an American-made, entry-level carrier.  The carrier is constructed of 500D nylon for the perfect balance between durability and weight reduction. Each row of PALS webbing is bar-tack reinforced for maximum durability, and we use Hypalon® for the shoulder straps for added strength.  Front PALS webbing is compatible with most chest rig adapters and allows for upper and lower mounting options. The AR Independence™ plate carrier is proudly made in our Phoenix, AZ facility.  Highlights: Rugged: front and rear plate pockets made of 500D Cordura® nylon Modular: Six rows of PALS webbing in the front and back, and up to 9 PALS channels on the cummerbund, depending on user-size Expandable: up to 46” cummerbund adjustment Carrier Weight: 1.1 lbs

SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts AR500 Armor® 1/2" Steel Target - Silhouette AR500 Armor® is proud to offer our AR500 Armor® Steel Targets for sale. AR500 Armor® provides consumers access to the best Steel Targets made of quality ½” steel. These steel targets were built from the ground up to be an affordable and dependable option for serious and casual shooters alike. The AR500 Armor® silhouette target is essential for shooters looking to enhance their tactical shooting skills on a realistic target. All of the AR500 Armor® Steel Targets are manufactured in the USA and meet strict quality control guidelines, making AR500 Armor® your #1 choice when you’re looking for steel silhouette targets for sale. Whether you are looking for steel targets shaped like gongs, silhouettes, or something a little different, all of our steel targets are rated to handle even the heaviest of common firearm calibers. These ½” AR500 Armor® Steel Plate Targets are rated for use with the most common pistol calibers at a distance of no less than 7 meters and the most common rifle calibers at a distance of no less than 50 meters. We strongly discourage the use of steel core ammunition. As always, be safe out there, always be situationally aware, and understand that spall and frag are always a danger with uncoated ballistic steel targets. Respect your distances and your aim points. SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts

SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts AR500 Armor® 1/2" Steel Target - 9" x 16.5" A-Zone AR500 Armor® is proud to offer our AR500 Armor® Steel Targets for sale. AR500 Armor® provides consumers access to the best Steel Targets made of quality ½” steel. These steel targets were built from the ground up to be an affordable and dependable option for serious and casual shooters alike. The AR500 Armor® 9” x 16.5” An A-Zone target is essential for shooters looking to enhance their tactical shooting skills on a realistic target. All of the AR500 Armor® Steel Targets are manufactured in the USA and meet strict quality control guidelines, making AR500 Armor® your #1 choice when you’re looking for steel silhouette targets for sale. Whether you are looking for steel targets shaped like gongs, silhouettes, or something a little different, all of our steel targets are rated to handle even the heaviest of common firearm calibers. These ½” AR500 Armor® Steel Plate Targets are rated for use with the most common pistol calibers at a distance of no less than 7 meters and the most common rifle calibers at a distance of no less than 50 meters. We strongly discourage the use of steel core ammunition. As always, be safe out there, always be situation-aware, and understand that spall and frag are always a danger with uncoated ballistic steel targets. Respect your distances and your aim points. SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts  

The Firebird features plenty of storage for your laptop and other personal gear.  The generously sized primary compartment features a laptop sleeve, compatible with nearly all laptops. Perfect for all-around general use. Hypalon® accented front upper pocket is designed for compatibility with the largest smartphones on the market, including their cases The large front lower pocket is complete with a key lanyard with hook, and retention pockets for pens and other accessories. It will easily accommodate a full-sized pistol for concealment.  The lined top pocket is located right next to the backpack drag handle. This pocket is lined on the inside with a non-scratch soft fabric and is ideal for storing your sunglasses, wallet, keys, or other accessories. Highlights Confidence: stops bullets used in 95% of gun-related homicides Discreet: multiple low-profile colors available  Peace of mind: protect the entire family Features Durable zippers with Hypalon® pull tabs Padded rear backing for comfort, and padded fully adjustable backpack straps High traction Hypalon bottom is abrasion and water-resistant Compartments & pockets Primary Compartment: 18” x 15” x 5" (with laptop sleeve) Front Upper Pocket: 4.5” x 8” Front Lower Pocket: 6” x 10”  Top Pocket: 8” x 8” Integrated Body Armor: Pistol Rated - Built-In Body Armor Level IIIA integrated soft armor: Rated to defeat 6 rounds of .44 Magnum, and .357 Sig at 1,430 feet per second Protective and lightweight anti-microbial and water-resistant rip-stop laminate cover Backpack + 11” x 15” soft armor: Less than 3lbs Shelf life: 5 years Rifle Rated - Built-In Body Armor Level III+ Lightweight integrated steel armor: Rated to defeat calibers up to 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39 and 7.62x51 NATO Backpack + 11” x 15” steel armor (base coat): 10.05 pounds  Shelf life: 20 years AR500 Armor Firebird Armored Backpack (11"x15" Panel) Looking for a functional item you can take practically anywhere and which will stop 95% of the rounds used in shooting incidents but want something larger than our Phoenix armored backpack? Look no further than our Firebird Armored Backpack. An invisible shield, always available Like the Phoenix, the AR500 Armor® Firebird Armored Backpack is built to stop the bullets used in 95% of gun-related homicides. Nobody will know your backpack doubles as a lifesaving tool. The Firebird is a low-profile armor system designed to stop the ammunition used in the majority of shootings but provides more armor coverage than the standard Phoenix Armor Backpack. Made from 1000 Denier Cordura, the Firebird weighs less than 3 pounds in its lightest configuration and comes ready to use. The armor is sewn into the pack, so you never have to worry about forgetting to install your armor or having it shift during use. The Firebird features plenty of storage for your laptop and other personal gear.  The generously sized primary compartment features a laptop sleeve, compatible with nearly all laptops. Perfect for all-around general use. Hypalon® accented front upper pocket is designed for compatibility with the largest smartphones on the market, including their cases The large front lower pocket is complete with a key lanyard with hook, and retention pockets for pens and other accessories. It will easily accommodate a full-sized pistol for concealment.  The lined top pocket is located right next to the backpack drag handle. This pocket is lined on the inside with a non-scratch soft fabric and is ideal for storing your sunglasses, wallet, keys, or other accessories. Highlights Confidence: stops bullets used in 95% of gun-related homicides Discreet: multiple low-profile colors available  Peace of mind: protect the entire family Features Durable zippers with Hypalon® pull tabs Padded rear backing for comfort, and padded fully adjustable backpack straps High traction Hypalon bottom is abrasion and water-resistant Compartments & pockets Primary Compartment: 18” x 15” x 5" (with laptop sleeve) Front Upper Pocket: 4.5” x 8” Front Lower Pocket: 6” x 10”  Top Pocket: 8” x 8” Integrated Body Armor: Pistol Rated - Built-In Body Armor Level IIIA integrated soft armor: Rated to defeat 6 rounds of .44 Magnum, and .357 Sig at 1,430 feet per second Protective and lightweight anti-microbial and water-resistant rip-stop laminate cover Backpack + 11” x 15” soft armor: Less than 3lbs Shelf life: 5 years Rifle Rated - Built-In Body Armor Level III+ Lightweight integrated steel armor: Rated to defeat calibers up to 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39 and 7.62x51 NATO Backpack + 11” x 15” steel armor (base coat): 10.05 pounds  Shelf life: 20 years The Trauma Pad Option: AR500 Armor® Trauma Pads are designed to decrease the blunt force energy felt upon impact when worn behind body armor. Our trauma pads feature non-Newtonian layers which instantly harden upon impact, creating a larger rigid surface area decreasing energy transfer, and increasing absorption throughout the trauma pad. When you choose to add a trauma pad, we will hand sew the trauma pad properly in place within The Phoenix Armored Backpack, no work or installation on your part is required. Trauma pads are ultra-lightweight, adding merely 5.9 ounces for 10” x 12” or 6.5 ounces for 11” x 15”.

SPARTAN ARMOR SYSTEMS® "SPARTAN" SWIMMERS CUT PLATE CARRIER   Product Overview The Spartan Armor Systems® "Spartan" Swimmers Cut Plate Carrier is designed for use with our Swimmers Cut steel core armor: Spartan™ Omega™ AR500 and AR550. This minimalist “Spartan” carrier is designed for those seeking speed, agility, and ultimate maneuverability in their carrier. The Swimmers Cut Plate Carrier is adjustable from a Medium size to XL and can accommodate 6”x6” side plates in the cummerbund, should you desire to run it with enhanced side protection. Intended for highly active environments that require the wearer to remain nimble, this carrier is constructed of extremely durable 860 Denier poly construction, fits 10”x12” swimmers cut plates which provide coverage where you need it most, but reduces weight and allows for enhanced mobility by eliminating a small amount of plating from the shoulder regions. Don’t let the paired down design fool you though, this versatile and effective carrier affords a good degree of customization with PALS webbing on the front and back sides for the attachment of molle accessories and pouches, and velcro on front and back for patch placement and identifiers. If you’re looking for a versatile plate carrier that allows for a greater range of motion and mobility that won’t break the bank, the Spartan Swimmers Cut Plate Carrier is for you.   Spartan Armor Systems® “Spartan” Swimmers Cut Plate Carrier Specs: Lightweight Plate Carrier That Accepts Side Plates Designed For Spartan Armor Systems® 10" X 12" Swimmers Cut Steel Core Plates Adjustable From Medium To XL PALS Webbing On Front And Back For Versatility Velcro On Front And Back For Patch Placement Cummerbund Is Designed To Hold 6" X 6" Side Plates Comfortably Shoulder Pads Included 860 Denier Poly Construction Reinforced Drag Handle NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems®. We can not guarantee a fit with plates made by other manufacturers.

The Target Man™ Dueling Tree Target Kit (Complete and ready to go)We’ve added pre-built dueling tree target kits to our site.The Dueling Tree is a fun and challenging reactive target system designed to increase the response time of shooters under pressure. Grab your buddy and see who can knock all the paddles to the opponents side first! First person with all the paddles on their opponents side wins the game. This target system brings hours of fun to all shooters, regardless of skill level.Please note the angle iron ships separately. You’ll receive 2 packages…. the first package will have the targets (and optional multi-purpose base) and the second package, which will be the angle iron with the pre-welded pivot tubes) will come in a shipping tube via UPS ground.All you have to do is select your kit size (4 paddle kit, 6 paddle kit, or 8 paddle kit) and we’ll do the rest of the work for you. Your angle iron will come with pre-welded 1.5″ x .25″ heavy-duty DOM pivot tubes.Decide if you want to add .22 paddles. The .22 paddles are for use with inexpensive .22 ammo ONLY. If you’re not shooting .22, don’t buy them.If you do not already own one of our patent-pending multi-purpose bases (MPB), you can add it as an option. The MPB can be used with any of our reactive target systems, obviously including the dueling tree. If you already have an MPB, do not purchase the base unless you’re looking to have a stand-alone dueling tree. Constructed from 3/8″ AR500, these paddles can take some severe abuse! Shoot with any pistol/magnum round from any safe distance! Shoot with high-caliber (lead only) center-fire weapons traveling 3200 FPS (or ANY pistol from any SAFE distance) or less from 100 yards. We have sold thousands of these kits and everyone loves how easy this tree is to build!   Angle iron measurements: 4 paddle tree- 46" 6 paddle tree- 66" 8 paddle tree- 84" NEW: You can add  TTM “challenge tree” 4" AR500 paddles to provide the shooter with a more challenging, smaller reactive paddle platform. If interested, you can now purchase optional 4″ AR500 challenge tree paddles as part of this kit. It literally takes just seconds to swap paddles. So, if you’re like Cory and Erika (from Range Time Tactical Shooting) and you’re looking for an even tougher challenge, please be sure to add our 4″ “challenge tree” paddles to your order! See A Comparison of Our Full Line Reactive Steel Targets on page 2:

DIY Texas Star Shooting Target AR500DIY Texas Star! Another INDUSTRY FIRST from The Target Man™**Minor welding requiredTexas Stars are popular targets. They increase response time, shooter coordination, and are just plain old fun to shoot! The Target Man™ has developed a Do-It-Yourself (DIY) Texas Star shooting kit so they are finally affordable... at last!By purchasing the DIY Texas Star, you will receive the spindle/pivot assembly, AR500 knock off paddles, and everything you’ll need to get started. All you will need to purchase is some angle iron, and materials to fabricate a base if you do not buy our optional Multi-Purpose Base.Here’s what’s included….     Rotating hub assemble     Rotating center pivot assembly with nylon bearings for wear resistance     All hardware needed     (5) AR500 “knock off” paddles with 6″ diameter or 8″ diameter, depending on selection.     Instructions     OPTIONAL A36 knock off paddles for .22LR ONLY Here’s what you’ll need to source…     (5) pieces of 1.5″x.25″ angle iron for arms. Recommend approximately 22″ in length     (1) piece of 1.5″x.25″ angle iron for post assembly. Recommend approximately 46″ in length     You will have to fabricate your own base with miscellaneous materials, or you can purchase our optional MPB. We recommend using 46" angle iron for his target.   *** Please note. Due to the design theory of the Texas Star, you may have to use sand bags on top of the MPB. The uneven weight distribution makes the target spin unbalanced, causing slight “drift”. If you decide to make your own target base, you can certainly create a more robust design for added stability.   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY “Triple Tap” – AR500 Steel Reactive Shooting TargetTriple Tap is a new 3-stage reactive target system constructed from ballistic grade AR500. When it’s manufactured by The Target Man™, you know you’re getting a quality tactical training aid!This three way target system is perfect for someone to enhance their tactical shooting skills. Here you have a head shot, hostage target, and center mass shot, and now a gut shot – all in one! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. We’ve engineered this to ensure your training focuses on all of the “take down” areas of the bad guy!This kit is available in a few different configurations for all budget levels. Here you are purchasing an un-welded kit, you can find a welded version in our "Reactive Steel Targets" section. You will also get an un-welded throat assembly. You will have to source your own angle iron and you can choose to purchase our MPB Multi Purpose Base or fabricate your own. Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Gut Shot target hole: 9″ wide Hostage reactive paddle width: 5″ Target comes unpainted. We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY “Snipers Paradise” – AR500 Reactive Steel Shooting Target“Snipers Paradise” (named by FaceBook fan Alex A) is a 3-stage reactive target system constructed from ballistic grade AR500 steel. All of our targets are laser cut for precision.  This three way target system is an excellent way to enhance your tactical shooting skills. Here you have a head shot, hostage target, and center mass shot all in one! Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”. We offer this kit in a welded and DIY configuration for all budget levels and it is available with or without our patent-pending Multi-Purpose Base (MPB). You can also add .22, Mild Steel Paddles. To purchase this kit welded click here. The DIY Snipers Paradise assembly is as easy as 1-2-3.   Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets WITHOUT the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add On section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. We recommend you source it locally.   By purchasing the DIY Snipers Paradise you will receive: AR500 IPSC Target With Head and Chest Holes  Two Pivot Tubes Two AR500 Paddles for Target Un-welded Throat Assembly  Detailed Instructions Target Specifications….. Target height: 21.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ Target comes unpainted. Weight: 33lbs   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ DIY CRITICAL SHOT – Reactive AR500 Steel Shooting TargetNamed by AR15.com member Jeffco55! The Target Man Critical Shot is a 2-stage reactive target system constructed from ballistic grade AR500. Critical shot doubles as a hostage target and a center-mass shot. Perfect for the LEO, gun enthusiast, and even the recreational weekend “plinker”. Get one of the best training aids to sharpen your skills should you ever need to take that “critical shot”. This kit is available in a few different configurations for all budget levels. This version is the the DIY un-welded assembly that comes with an un-welded throat assembly. This kit is available with and without the our patent-pending Multi-Purpose Base (MPB) and you can also purchase this kit un-welded in our DIY Shooting Target section. Save by purchasing the un-welded kit and fab up your own base.  Our setup is designed to be used with 1.5″x.25″ angle iron. We sell all of our reactive targets without the angle iron. You can source it locally for $12-$15, or you can buy it separately in the Replacements and Add on section of this site. It’s a more expensive option simply due to the shipping cost. Remember, we want to make this target kit affordable for all budgets. If possible we recommend you source it locally.Target Specifications….. Target height: 19.5″ Target width: 12″ Center hole of target diameter: 4.5 Center hole reactive paddle diameter: 6″ Hostage reactive paddle width: 5″ We recommend using 46" angle iron for his target.   This is basically a 2/3 scale IPSC   See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Spartan Armor Systems has teamed up with Contact Armor to offer our customers an extreme concealable package that you can wear to the gym, the grocery store, wherever you feel it is deemed necessary.  *THIS PACKAGE IS SOLD AS IS, NO RETURNS OR EXCHANGES* Introducing Spartan Armor Systems™ Flex Fused Core™ IIIA Soft Body Armor Due to popular demand, we have developed our own version of pistol rated level IIIA soft body armor. The Spartan Armor Systems™ Flex Fused Core™ Soft Armor is comfortable and easy to wear. Keeping with Spartan Armor tradition, it offers GREAT protection at a GREAT price. Composed of only the best American made materials and proudly assembled in our new state of the art facility in Tucson, Arizona. Tested and passed in accordance with NIJ-STD-0101.06 / MIL-STD-662F. Rated to stop .44 MAG SJHP, as well as Special Threat Rated to stop.357 SIG FMJ  This soft armor can be used stand alone, giving level IIIA protection or ICW (in conjunction with) as backer on any of hard armor systems. All parts of this product are proudly American made. .35" profile 10"x12" Panel: Weight 1.14 lb This package comes with: Level IIIA Flexed Fused Core Soft Armor:10x12 Front and Back Panel5x7 Side Panels Contact Armor Hybrid Cool Carrier:Hybrid Cool Carrier (your size of choice M, L, or XL) If you have any questions about sizing and or the IIIA Soft Armor please feel free to reach out to us at: contact@spartanarmorsystems.com (520)396-3335  

SPARTAN ARMOR SYSTEMS® CONCEALABLE IIIA CERTIFIED WRAPAROUND VEST   Product Overview Spartan Armor Systems® has constructed a Level IIIA Wraparound Concealable Vest that is designed to be an exceptionally discrete option while protecting the user from most handgun rounds. This lightweight, breathable, water repellant carrier has a convenient four-point adjustable strapping system that was developed with a high degree of comfort and ease of use in mind.    NIJ Certified, Covert and Effective Spartan Armor Systems® Concealable IIIA Wraparound Vest is certified under NIJ 0101.06 specifications and testing. Rated to stop .44 MAG SJHP, as well as Special Threat Rated to stop a .357 SIG FMJ, this flexible, comfortable, discrete soft armor wraparound vest can be used stand-alone, giving level IIIA protection. This wraparound concealment vest is a popular choice for Law Enforcement Officers and Security Professionals who need a comfortable armor solution for extended duty use but with the ability to wear this wraparound body armor vest as a backer ICW (in conjunction with) any of Spartan Armor’s hard armor systems. All parts of this product are proudly American-made. Concealable Level IIIA Certified Wraparound Vest Specifications: Side Opening Design Moisture-wicking, Anti-Microbial Inner Liner (This Draws Moisture Away From The Body For A Faster Cool-Down Time) Shoulder Straps Are Fully Adjustable For Fitment While Being Able To Keep Your Carrier On  5” X 8” Trauma Plate (Meant To Reduce Back Face Deformation) Dual 6” X 8” And 7” X 9” Front Plate Inserts Low-profile Loop For Less Bulkiness And Reduced Friction Against Clothing Sizing Options: Small, Medium, Large, X-large, And XX-large Made In U.S.A.   Note: If you are a department looking to get more information on this product please feel free to give our Bulk Sales Department a call or send an email for more specifications and product guides.   Note: Custom Sizing for Spartan Armor Systems® Concealable Level IIIA Certified Wraparound Vest is available.

Caliber Armor CaliberX IIIA Body Armor Panels For Exo Carrier Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density. We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm.

Soft Body Armor Panel available in 10×12 and 11×14 options SAPI style cut Lightweight CaliberX™ 10×12 15.8oz, 11×14 1lb 4oz Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Waterproof Interior sewn together for longevity Proudly made in the U.S.A Features Removable cummerbund with double layer Mil-Spec Velcro® Two (2) internal pouches on each side of cummerbund Fully adjustable shoulder straps Large soft side Velcro® area for placards Made with Mil-Spec IR Treaded 500D Cordura® Mil-Spec IR Treated Murdock Webbing® All of the fabrics, webbing and plastic hardware are treated at source to deliver the lowest I.R. signature possible Weight 1 lb Available in: Black, Coyote Tan, Ranger Green and MultiCam® The Low-Visibility Plate Carrier is made with high quality U.S. Mil-Spec sourced materials and designed by U.S. Veterans. Sizing:Regular: Fits 10×12” plates or soft armor panelsX-Large: Fits 11×14 plates or soft armor panels Caliber Armor CaliberX Ultra Light Weight Soft Armor With Concealment Carrier Soft Body Armor Panel available in 10×12 and 11×14 options SAPI style cut Lightweight CaliberX™ 10×12 15.8oz, 11×14 1lb 4oz Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Waterproof Interior sewn together for longevity Proudly made in the U.S.A Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density. We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing. NIJ STANDARD-0101.06 and .07 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2 MANUFACTURING TOLERANCES: Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%. Low-Visibility Plate Carrier This Low-Visibility Plate Carrier is low profile and designed to endure and outlast any mission. It is fully adjustable for size, comfort, and protection. The sides are made from double layer Mil-Spec elastic and incorporates two internal pouches on each side which can hold magazine pouches and/or communication tools. The shoulder and sides of the Low-Visibility Plate Carrier are fully adjustable with Velcro® closures.  Features Removable cummerbund with double layer Mil-Spec Velcro® Two (2) internal pouches on each side of cummerbund Fully adjustable shoulder straps Large soft side Velcro® area for placards Made with Mil-Spec IR Treaded 500D Cordura® Mil-Spec IR Treated Murdock Webbing® All of the fabrics, webbing and plastic hardware are treated at source to deliver the lowest I.R. signature possible Weight 1 lb Available in: Black, Coyote Tan, Ranger Green and MultiCam® The Low-Visibility Plate Carrier is made with high quality U.S. Mil-Spec sourced materials and designed by U.S. Veterans. Sizing:Regular: Fits 10×12” plates or soft armor panelsX-Large: Fits 11×14 plates or soft armor panels

The Shellback Tactical Skirmish Active Shooter Armor Kit with Level IV 1155 Plates is tactical armored kit solution to being prepared for an active shooter situation. This complete kit features the Skirmish Plate Carrier and two level IV model 1155 hard armor plates. Shellback Tactical Skirmish Active Shooter Kit with Level IV 1155 Plates Kit Components Shellback Tactical Skirmish Plate Carrier x 1 Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2  Skirmish Plate Carrier Features 500 Denier Nylon Low profile design for mobility 3D Spacer mesh padding for comfort Front kangaroo pouch Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes Heavy duty par tacking at key stress points  Fits 10 x 12 shooter cut plates  Lifetime Warranty Imported Level IV Model 1155 Plate Features NIJ level IV threat protection NIJ 0101.06 certified and listed on NIJ CPL list Multi-Hit Rated Single Curve 10" x 12" SAPI cut  Weight - 8.2lbs  Stand alone protection 600 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing   Made in the USA  10 Year warranty  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Shellback Tactical Level IIIA Ballistic PASGT Helmet  The Shellback Tactical Level IIIA Ballistic PASGT Helmet provides ballistic protection against handgun ammunition. The PASGT or Personnel Armor System for Ground Troops helmet, has been used for many decades by military and law enforcement personnel all across the world.  This basic helmet features adjustable three point harness, cushioned leather headband and the ability to attach a face shield. Stay protected and purchase your Shellback Tactical Level IIIA Ballistic PASGT Helmet today.  Specifications PASGT - Personnel Armor System for Ground Troops helmet Designed according to the latest US Military requirements Level IIIA ballistic protection against hand gun rounds  Meets NIJ Standard 0101.06  Kevlar ballistic fiber construction Adjustable 3 Point US PASGT harness  5 Year Ballistic Warranty Sizing Circumference is measured around head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes. Medium Circumference - 21.9" to 22.7" Hat Size - 6 7/8 - 7 1/8 Weight - 2.9 lbs Large  Circumference - 22.7" to 24" Hat Size - 7 1/4 - 7 3/8 Weight - 3.1 lbs  XLarge Circumference - 24" to 26" Hat Size - 7 1/2 to 7 3/4 Weight - 3.3 lbs    Rounds Defeated  .357 SIG FMJ  9MM .38 .40 S&W .44 MAG Legal THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 1155 Plates   The Shellback Tactical Defender 2.0 Active Shooter Armor Kit with Level IV 1155 Plates is your complete armored kit answer to being prepared for an active shooter situation. This complete kit is packed with features - Fully adjustable lightweight carrier, two model 1155 level IV armor plates and a convenient carry bag for storage. Stay protected and order your Shellback Tactical Defender 2.0 Active Shooter Kit with Level IV 1155 Plates today!  Kit Components Shellback Tactical Defender 2.0 Plate Carrier x 1  Shellback Tactical Kit Carrying Bag x 1 Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2  Defender 2.0 Plate Carrier Features Constructed of durable 500 denier Nylon  Holds 10 x 12 shooter cut plates Lightweight laser cut molle  Fully adjustable side straps and shoulders One size fits most  Integrated padded shoulder pads for comfort Front and back molle loop panels for placards and patches Two integrated kangaroo M4 magazine pouches with bungee retention One integrated tourniquet pouch marked with a red tab for easy identification Drag handle on the rear Lifetime warranty  Imported Kit Carrying Bag Constructed of 500 denier nylon Bag will hold Shellback Defender 2.0 Plate Carrier, plates and magazines Two carrying straps Loop panels for hook placard and patches Zipper closure Lifetime warranty Imported LEVEL IV MODEL 1155 PLATE FEATURES NIJ level IV threat protection NIJ 0101.06 certified and listed on NIJ CPL list Multi-Hit Rated Single Curve 10" x 12" SAPI cut  Weight - 8.2lbs  Stand alone protection 600 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing   Made in the USA  10 Year warranty  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Shellback Tactical STEALTH Low Vis Concealable Plate Carrier The Shellback Tactical STEALTH Low Vis Plate Carrier is designed to be a super low profile, light weight plate carrier/armor carrier. Ideal to be worn under a jacket, surveillance operations, or just as a slick plate carrier. Built for low visibility and concealment. The carrier is designed to hold 10x12 Level III or Level IV hard armor plates. It can also accept 10x12 soft armor style plate backers if plates are not needed. The cummerbund is extremely adjustable due to its overlapping design front and back that can fit small statured and larger statured body types. Hypalon non slip material makes up the fully adjustable shoulder straps which also have 2 slips for other uses. The front has a handy zippered admin pocket, a large 4 inch loop area for placards and integrated nylon vertical strips to accommodate QASM buckles. To add a chest rig if needed. QASM Buckles not included. Also included is a double magazine pouch for .223/5.56 magazines. Cummerbund has 2 integrated pouches for magazines or radio. Interior is lined with breathable spacer mesh for comfort. The back of the carrier has an integrated Hypalon drag handle and a 4 inch loop are for patch identifiers. Magazines in pictures not included Specifications: Constructed of 500 denier Cordura Low Vis Carrier Adjustable Hypalon shoulders with 2 slits Two areas of loop for identifiers Integrated zippered admin pouch Integrated nylon vertical strips to accommodate QASM buckles. To add a chest rig if needed. QASM Buckles not included Heavy Duty bar tacking at key stress points Low Profile/ Lightweight Can be concealed under jacket Removable double rifle mag pouch included Fully adjustable Cummerbund Overlaps itself on the front and back area making it extremely adjustable in or out depending on your size. Cummerbund has 2 pocket areas on each side for magazines or radios Hypalon Drag Handle lays flat- Secures with Hook and Loop Interior has 3D style spacer mesh Plate pockets load from the bottom and will accept up to 10x12 Level 3 and 4 ESAPI OR SIMILAR PLATES and Plate Backers GSA and TAA Compliant  Lifetime warranty