10x12 Armor Plates

Highlights: Peace of mind: helps reduce backface deformation signature with soft armor Confidence: absorbs and dissipates impact energy Comfort: ultralight Approximate Weight: 6” x 8” Side Plate Cut – 2.3 ounces 9.5" x 6" ABS Cut - 2.8 ounces 9" x 9" – 3.3 ounces 10” x 12” ASC – 5.7 ounces 11” x 14” ASC – 7.4 ounces 11” x 15” Backpack Cut – 7.6 ounces AR500 Armor Blunt Force Trauma Pad When a bullet strikes body armor, the energy from the impact is transferred to the armor. What happens to the armor depends on the type and material. Soft armor flexes and “catches” the bullet, whereas hard armor can either shatter the bullet (steel), dissipate the force by breaking apart (ceramic) or capture the bullet by melting around it (polyethylene). All AR500 Armor® in standalone configurations perform very well in tests against back face deformation (BFD) and energy transfer and are designed with BFD in mind.  Helps dissipate energy transfer Each trauma pad is specially engineered to mitigate blunt force trauma in case your armor takes a round and reduces the amount of back face deformation that could occur, which can mitigate the risk of injury after impact.  Designed to be worn in conjunction with and behind your body armor, our Trauma Pads reduce the amount of energy transfer to your body, reducing felt energy through your armor. Our patented Advanced Shooters Cut (ASC) matches perfectly to our Level IIIA, III, III+, and III+ Lightweight body armor improving ergonomics with your rifle. Compatible with AR500 Armor® body armor and most other armor systems and plate carriers. Highlights: Peace of mind: helps reduce backface deformation signature with soft armor Confidence: absorbs and dissipates impact energy Comfort: ultralight Approximate Weight: 6” x 8” Side Plate Cut – 2.3 ounces 9.5" x 6" ABS Cut - 2.8 ounces 9" x 9" – 3.3 ounces 10” x 12” ASC – 5.7 ounces 11” x 14” ASC – 7.4 ounces 11” x 15” Backpack Cut – 7.6 ounces Trauma pads are non-ballistic and offer no increase in ballistic protection.

Shellback Tactical Prevail Series 10 x 12 NIJ 0101.06 Certified Level IV Hard Armor Plate Model 1155 The Shellback Tactical 1155 Level IV Hard Body Armor Plate is a single-curve ballistic rifle plate designed to withstand rigorous usage. This hard body armor plate was designed to protect the user who has their lives on the line in critical situations. By wearing Shellback Tactical 1155 Level IV Hard Body Armor Plate it will instill confidence in the user and let them know that at the end of the day they will go home to the ones they love. If you are looking for a single-curve ballistic rifle plate that was designed to instill confidence then the Shellback Tactical 1155 Level IV Hard Body Armor Plate is where your search ends. Place your order today! Specifications NIJ threat level IV NIJ 0101.06 Certified Listed on NIJ CPL List SAPI/ESAPI Cut Weight 8.2lbs Stand alone protection Single curve Single plate 10” W x 12” L X 1” D Multihit Rated  M2AP - 5 Rounds  3 Rounds Total  B32,API - 1 Round  M855A1 - 1 Round  M193 - 1 Round  Constructed of monolithic ceramic face and polyethylene backing  600 Denier water resistant cover  10 year ballistic warranty USA Made - Berry Compliant GSA and TAA Compliant  ROUNDS DEFEATED  .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP   LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III Body Armor Essential protection ought to be affordable and reliable, which is why AR500 Armor is proud to offer one of the most cost-effective plates on the market with our Steel Level III (specifications below): An AR500 Steel plate, cut in our patented Advanced Shooters Cut shape and design, and covered with an exclusive FragLock™ Coat, in Base and Build-Up forms.  Our Level III Steel, unlike ceramic or polyethylene alternatives, is capable of protecting against several direct hits while still being less bulky than competing materials. It also has been independently tested in accordance with NIJ 0101.06 threat levels through Oregon Ballistics (OBL), and H.P. White Laboratories. This means it is rated to stop 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS, and special threat tested to stop 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS. A benefit not elsewhere found in the industry, the Advanced Shooters Cut shape affords you additional room for your rifle stock, improving comfort and shooting ergonomics; this is available in right and left-handed configurations. It is also compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor, given there is an appropriately sized chest plate pocket. Finally, the FragLock™ Coat is a unique feature that guarantees two benefits: First, it gives a twenty-year maintenance-free shelf life - making this steel plate far outlast ceramic or polyethylene alternatives. Second, the coating mitigates the dangers of spalling (when pieces of steel fragment off) and fragmentation (when the bullet’s remains fragment off), protecting the wearer from both the direct ballistic impact and the aftermath of the impact. The Build-Up Coat features stronger protection with the tradeoff of greater weight and size, while the Base Coat is lighter and thinner with less protection. SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

Highlights NIJ IIIA Certified Materials Durable Construction Slim Tapered Profile Unobtrusive Design 5 Year Warranty Concealable Black What”s Included 1 Backpack Insert Backpack Armor Inserts The Bullet Resistant Backpack Armor Insert is designed to easily fit into any backpack. You can also use it in a purse, briefcase, or laptop bag. This bullet resistant insert uses the same ballistic materials as our vests that is rated NIJ Level IIIA. Durable and light weight construction and a slim profile make this insert a great addition to any bag for any situation. Highlights NIJ IIIA Certified Materials Durable Construction Slim Tapered Profile Unobtrusive Design 5 Year Warranty Concealable Black What”s Included 1 Backpack Insert NOTE: The National Institute of Justice does not certify backpack armor, however we construct these inserts with the same certified ballistic package as our Vests and Carriers.  Specifications Backpack Insert Weights (lbs) Size Light Lighter Lightest SM (10x14) 1.57 lbs 1.26 lbs 0.89 lbs LG (12x17) 2.32 lbs 1.85 lbs 1.26 lbs

SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SINGLE PLATE With Base Coat Corrosion Protection    Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Shooters Cut Plate Weight (per plate): 8”x10” AR550 Shooters Cut: Base Coat 5lbs 5oz. Full Coat 6lbs 1oz. 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs. Swimmers Cut Plate Weight (per plate): 8x10 AR550 Swimmers Cut: Base Coat 4lbs 6oz. Full Coat 4lbs 14oz. 10x12 AR550 Swimmers Cut: Base Coat 6lbs 10oz. Full Coat 7lbs 8oz. 11x14 AR550 Swimmers Cut: Base Coat 8lbs 5oz. Full Coat 8lbs 13oz.   Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.        

SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III Body Armor With Build Up Coat Essential protection ought to be affordable and reliable, which is why AR500 Armor is proud to offer one of the most cost-effective plates on the market with our Steel Level III (specifications below): An AR500 Steel plate, cut in our patented Advanced Shooters Cut shape and design, and covered with an exclusive FragLock™ Coat, in Base and Build-Up forms.  Our Level III Steel, unlike ceramic or polyethylene alternatives, is capable of protecting against several direct hits while still being less bulky than competing materials. It also has been independently tested in accordance with NIJ 0101.06 threat levels through Oregon Ballistics (OBL), and H.P. White Laboratories. This means it is rated to stop 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS, and special threat tested to stop 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS. A benefit not elsewhere found in the industry, the Advanced Shooters Cut shape affords you additional room for your rifle stock, improving comfort and shooting ergonomics; this is available in right and left-handed configurations. It is also compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor, given there is an appropriately sized chest plate pocket. Finally, the FragLock™ Coat is a unique feature that guarantees two benefits: First, it gives a twenty-year maintenance-free shelf life - making this steel plate far outlast ceramic or polyethylene alternatives. Second, the coating mitigates the dangers of spalling (when pieces of steel fragment off) and fragmentation (when the bullet’s remains fragment off), protecting the wearer from both the direct ballistic impact and the aftermath of the impact. The Build-Up Coat features stronger protection with the tradeoff of greater weight and size, while the Base Coat is lighter and thinner with less protection. SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

Highlights NIJ Level III Certified AR500 Steel Construction Polyurea Coated Stand Alone 5 Year Warranty Black What’s Included 1 Level III Steel Plate Specifications 10” X 12”  Thinness: .35” Shooters Cut Weighs 7.5 lbs Full Cut Weighs 8.7 lbs Level III Steel Plate This is our Level III NIJ Certified Steel Armor Plate. Easily fitting into any of our Plate Carriers this plate is constructed of high-carbon AR500 Steel and treated with our Polyurea Blast Coating to prevent spalling. We offer two different cut options to optimize coverage and performance based on your needs. Add this plate to maximize your ballistic package! Highlights NIJ Level III Certified AR500 Steel Construction Polyurea Coated Stand Alone 5 Year Warranty Black What’s Included 1 Level III Steel Plate Specifications 10” X 12”  Thinness: .35” Shooters Cut Weighs 7.5 lbs Full Cut Weighs 8.7 lbs  

In addition to stopping the 7.62x51 M80 Ball at 2780 FPS, our PE plate has also been Special Threat tested against the following rounds: 5.56x45 M193 at 3150 FPS 7.62x39 AK-47 at 2380 FPS Highlights Peace of mind: Tested to NIJ Standard 0101.06 Level III and is multi-hit capable  Confidence: stops high-velocity military 5.56 and .30 caliber ammunition Safety: At 3.5 pounds, our PE plate is neutrally buoyant Specifications Tested to Level III threats 10”x12” plate weighs only 3.5 lbs Stand-Alone and Multi-Hit capable 1” Thick Profile Ergonomic Multiple Axis Curvature Durable polyurea coating seals out water and the elements Made in our Phoenix, Arizona, facility AR500 Armor Level III Lightweight UHMWPE Body Armor 10" x 12" There is a saying in the backpacking community, “take care of the ounces, and the pounds will take care of themselves.” When weight and mobility are everything in your body armor, the AR500 Armor® Level III ultra-high molecular weight polyethylene plate is the clear choice. Ultra-light Level III protection Our UHMWPE (aka PE) plate weighs a mere 3.5 pounds in our 10”x12” standard shooters cut. This stand-alone plate is tested to NIJ 0101.06 Level III threats and is multi-hit capable. It is manufactured in Phoenix, Arizona, and carries a 5-year shelf life. Our new PE lightweight armor plate is a great choice for those whose primary concern is weight.  In addition to stopping the 7.62x51 M80 Ball at 2780 FPS, our PE plate has also been Special Threat tested against the following rounds: 5.56x45 M193 at 3150 FPS 7.62x39 AK-47 at 2380 FPS Highlights Peace of mind: Tested to NIJ Standard 0101.06 Level III and is multi-hit capable  Confidence: stops high-velocity military 5.56 and .30 caliber ammunition Safety: At 3.5 pounds, our PE plate is neutrally buoyant Specifications Tested to Level III threats 10”x12” plate weighs only 3.5 lbs Stand-Alone and Multi-Hit capable 1” Thick Profile Ergonomic Multiple Axis Curvature Durable polyurea coating seals out water and the elements Made in our Phoenix, Arizona, facility Note: Due to its size and profile, this plate currently fits in our Testudo Gen 2.0 and AR Independence carriers only.

Made in the USA: Ensures that the product is made with the highest standards. Multiple hit capability: Protection against multiple impacts, allowing for quick and easy plate replacement in the field. Rated for up to six hits from 7.62 Nato bullets: Protection against a wide range of high-powered rifle rounds, providing peace of mind in the field. Passed NIJ 0101.06 6 shot stand alone tests: Rigorously tested and proven to protect against a wide range of high-powered rifle rounds. Laser cut for precision: Tailored to fit your body and provide maximum coverage. Your choice of Level III AR500 or Lightweight Level III+ steel core armor plates. Tactical Scorpion Gear AR500 steel core armor (Made in the USA) A stand alone armor plate with multiple hit capability, which means that you'll be protected from multiple impacts and the plate can be quickly and easily swapped out to get you back in the fight ASAP. Manufactured from certified AR-500 steel with a Brinnell Hardness Rating of 505-518BHN, which ensures that the plate is durable and can withstand heavy use. Laser cut for precision, which ensures that the plate is tailored to fit your body and provide maximum coverage. Fully tested by independent lab, which means that the plate has been evaluated for performance and quality by experts in the field. Rated for up to six hits from 7.62 Nato bullets (.308 Winchester) with velocities up to 2780 fps, which means that the plate can protect you from a wide range of high-powered rifle rounds, providing you with the peace of mind that you need in the field. Tactical Scorpion Gear Level III+ steel plate armor (Made in the USA) Our armor plates comply with all NIJ standards, ensuring that you receive top quality products at an unbeatable price. A stand alone armor plate with multiple hit capability, which means that you'll be protected from multiple impacts and the plate can be quickly and easily swapped out to get you back in the fight ASAP. Passed NIJ 0101.06 6 shot stand alone tests against 5.56 M855 M80 ball (greentip) at 2800fps and 5.56 M193 55 Grain FMJ at 2900fps, and in-house testing defeated 30-06 165 grain copper tip trophy, which means that the plate has been rigorously tested and proven to protect against a wide range of high-powered rifle rounds, providing you with the peace of mind that you need in the field. Listed on the Department of Justice NIJ certification website, which means that the plate is recognized as meeting the highest standards for ballistic resistance by the government. Level 3+ plates are manufactured from a proprietary steel reaching Brinnell Hardness ratings in 600 - 630, which ensures that the plate is durable and can withstand heavy use. Laser cut for precision, which ensures that the plate is tailored to fit your body and provide maximum coverage. Simply Stronger, Thinner and lighter than the competition, which means that you'll have the protection you need without the added weight or bulk, allowing you to move freely and easily in the field. By using our new proprietary steel core, you will be getting a plate that is far stronger than traditional AR500 - AR650 steel cores. Unlike the traditional cores, our core is hardened all the way through, making it 20% lighter and superior in strength. With our plates, you can move freely and with confidence, knowing that you have the best protection. Our build-up spall coating, done with the Graco EXP-2, which is the top of the line high pressure heated coating system, ensures that you will be protected from any shrapnel that may escape from the armored assembly when hit. The plate core is chemically washed and etched on the strike surface to eliminate the coating from delaminating when shot, giving you an added layer of safety. Tactical Scorpion Gear 10 mm Trauma Pad Custom made to fit our armor plate perfectly, using a computer cut on a triple axis CNC router machine. Will absorb the impact of any projectile, protecting your ribs from compression, giving you an added layer of safety and comfort. ** This model complies with NIJ Standard-0101.06 for Ballistic resistance of Body Armor.** At Tactical Scorpion Gear, we use CNC laser cutting table to cut all our Steel core products, ensuring precision, accuracy and perfect fit of the plate to your body, providing maximum coverage and protection. We don't settle for other inferior cutting methods like plasma cutting that can generate excessive heat, causing damage to the plate, and can cause the edges to soften. This can lead to chipping, damage, and even shattering when hit. We manufacture all our vest carriers, Kevlar level IIIA vests and all our products in-house, ensuring their availability and quick shipping. Trust us to provide you top-quality, durable and reliable products. Tested by HP White laboratory ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NIJ tested Level III Armor will defeat 6 rifles round shots up to 7.6251/.308 @ 2780 ft/s @ 15 METERS Level III+ lightweight base coated Plate Size Weight (pounds) Weight (kilograms) 6x6 2.08 0.93 6x8 2.75 1.25 8x10 4.4 1.98 10x12 6.45 2.93 10x12 modified 5.5 2.49 11x14 8.74 3.91 Level III AR500 base coated Plate Size Weight (pounds) Weight (kilograms) 6x6 2.67 1.21 6x8 3.32 1.51 8x10 5.17 2.35 10x12 7.82 3.56 10x12 modified 7.24 3.28 11x14 11.24 5.11 Level III+ lightweight spall coated Plate Size Weight (pounds) Weight (kilograms) 6x6 2.44 1.1 6x8 3.25 1.47 8x10 5 2.27 10x12 7.5 3.4 10x12 modified 6.75 3.06 11x14 9.94 4.53 Level III AR500 spall coated Plate Size Weight (pounds) Weight (kilograms) 6x6 2.94 1.33 6x8 4 1.81 8x10 6.13 2.79 10x12 9.38 4.27

SHELLBACK TACTICAL 10 X 12 TRIPLE-CURVE SWIMMER CUT LEVEL IV HARD ARMOR PLATE MODEL 26605-2 Level IV Model 26605-2 Plate Features NIJ threat level IV standalone protection NIJ 0101.06 Certified - Listed on NIJ compliant armor list  Manufactured from high-density alumina ceramic core (AI203) backed with layered woven aramid fiber Wrapped with black Cordura nylon covering  Swimmer cut   Triple curve 10" W x 12"L x 1"D Weight 6.9LBS  5 year ballistic warranty  Made in the USA by LTC - Leading Technology Composites Rounds Defeated .357 SIG FMJ  9MM .38 .40 S&W .44 .45 5.56 x 45mm - M193/M855/SS109 7.62 x 54R - LPS  7.62 x 54R - B-32 API 7.62 x 39mm - API 7.62 x 39mm - Ball 7.62 x 51mm - M80 Ball 7.62 x 36 M2AP

Spartan Armor Systems ® Hercules Level IV Ceramic Advanced Compound Curve Body Armor -  Set of Two Plates Product Overview The Hercules level IV body armor plate is manufactured in-house at the Spartan Armor Systems® facility in Tucson, AZ utilizing ballistic ceramic and UHMWPE materials. As with all body armor manufactured by Spartan Armor Systems®, the Hercules level IV ceramic body armor plate has been independently tested and verified by an NIJ Certified laboratory. Each Hercules level IV body armor plate is rated to stop armor piercing rifle rounds up to .30-06 M2 AP. Weighing in at just 6.9 lbs per plate, the Hercules is noticeably lighter than most level IV ceramic body armor plates available. With full edge-to-edge 10”x12” coverage and Advanced Compound Curve design, the Hercules is ideal for operators in need of maximum protection and comfort.  Full Edge-To-Edge Protection Get what you pay for! It might not be obvious, but some 10”x12” level IV ceramic body armor plates on the market only provide protection in a 8”x10” area to keep manufacturing costs low. However, the Hercules ceramic body armor plate provides full 10”x12” edge-to-edge protection for the operator. When your life is on the line, don’t take chances with other ceramic plates that measure 10”x12”, but only provide an 8”x10” area of protection. Buy ceramic level IV body armor plates that give you the protection you’re paying for.   Advanced Compound Curve - True Multi-Curve Design The Hercules level IV body armor plate features our Advanced Compound Curve (ACC). While many body armor plates claim to be “multi-curve”, the ACC profile is a true multi-curve design providing the operator with the most comfortable fit of any ceramic level IV body armor plate. This advanced ergonomic design is especially important during extended duty engagements, typical of Law Enforcement, Security, and Military operations. Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Ceramic & UHMWPE Plate Size: 10”x12” Protection Area: 10”x12” Weight: 6.9 lbs Thickness: 1.1” Plate Quantity: Two (2) Plates Included Curve Profile: Advanced Compound Curve Cut: SAPI/ESAPI (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Condura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ.   NOTE: Ceramic armor cannot be resold, therefore ALL sales for this product are final. No returns or exchanges accepted.

SPARTAN™ OMEGA™ AR500 BODY ARMOR SINGLE PLATE With Base Coat Corrosion Protection Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.   Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor! Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.   Chest Plate Weight (per plate):  8”x10” Plate: Base Coat 5lbs 13oz. Full Coat 6lbs 7oz 10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz. 11"x14" Plate: Base Coat 10lbs 1oz. Full Coat 11lbs 6oz. Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only Includes 1 Armor Plate Per Order Available in Shooters Cut or Swimmers Cut   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

TRAUMA PAD SET OF TWO - SINGLE PAD   Product Overview Spartan Armor Systems® Non-Ballistic Trauma Pads utilize extremely light micro-cellular urethane foam padding that significantly decreases backface deformation and dissipates the impact energy sustained on your plate armor, reducing the transmitted force to the operator’s body. Additionally, our trauma pads dramatically increase comfort and ergonomics while wearing body armor. Simply put, the Spartan Armor Systems® Trauma Pad will drastically reduce blunt force trauma by absorbing energy over the increased surface area of the pad.   Increasing Comfort While Decreasing Trauma Backface deformation has the potential to occur when a round impacts any type of body armor. This energy transfer has the potential to be felt regardless of which advanced Spartan Armor Systems® body armor ballistic panel you decide to protect yourself with. In minor cases, the result is bruising around the area of impact. However, in more severe cases backface deformation can result in serious bruising, skin puncture, internal bleeding, and even broken bones. Though most of our body armor has inherently good energy disbursing properties throughout the strike face, our advanced Trauma Pads will further mitigate energy transfer and back face deformation hazards which your body may absorb. The added benefit of the sleek and thin .25” Trauma Pad is increased comfort and mobility, as the pad itself serves as a cushion between body armor plates and the operator. Spartan Armor Systems® Trauma Pads are constructed utilizing highly durable and comfortable Nylon Ripstop fabric, the same material BDUs are made from. We recommend the use of trauma pads with all body armor, especially ceramic body armor which is more prone to backface deformation.    Spartan Armor Systems® Trauma Pad Specs:  Dimensions: 8″ X 10″, 10″ X 12″, Or 11″ X 14″ – Compatible With All Spartan Armor Systems® Body Armor Chest Pad Weights: 4.9 Ounces (Per 8″x10″ Chest Pad), 5.7 Ounces (Per 10″ X 12″ Chest Pad), 6.4 Ounces (Per 11″ X 14″ Chest Pad) Thickness: .25″ Thin Profile

SPARTAN ARMOR SYSTEMS® SPARTAN DL PLATE CARRIER Product Overview When the environment you are operating in demands discretion and stealth, the Spartan Armor Systems® DL Plate Carrier offers minimalist features for extreme concealment. Virtually indiscernible when worn beneath loose clothing, these ultra-minimalist carriers are designed to fit with Spartan Armor Systems® Flex Fused Core Soft Armor Panels. Covert, comfortable, and concealed - the Spartan DL Plate Carrier is made for environments that demand maintaining a low profile. The Spartan DL Concealment carrier can also be worn overt (on the outside of clothing) and can accept hard armor such as Spartan™ Omega™ AR500, AR550, or Armis IIIA Hard Armor. Rugged, Reliable, Versatile The Low-profile design of the Spartan Armor Systems® DL Plate Carrier features bottom-loading plate insertion capability and a 4” fully adjustable cummerbund. This carrier comes in two sizes and can accommodate 10"x12" or 11"x14" body armor plates. The 500 Denier/Nylon blended material makes for an extremely durable, comfortable carrier that will flex and bend, contouring to your torso as you move throughout your day and activities. The inclusion of built-in soft Mag Pouches provides a tactical advantage. The Spartan DL Plate Carrier can accept AR Mags as well as a Pistol Mag (2 on each side) for versatility and quick access to your reloads.  Spartan Armor Systems® Spartan DL Plate Carrier Specs:  Low-profile Minimalist Carrier Bottom-loading Design Supports The Plate In The Pocket 4″ Fully Adjustable Elastic Cummerbund 2” Low Profile Shoulder Adjustment Velcro On Front And Back For Name, Id, Blood Type, Etc. Material: 500 Denier Nylon/Pu Nylon Webbing Size: 11.4" X 12.5" Integrated Mag Pouches Hold M4 Mags As Well As A Pistol Mags (2 On Each Side) Note: Due to the extremely low profile design of the Spartan DL Plate Carrier, they WILL NOT ACCEPT SIDE PLATES. Note: The Spartan DL Plate Carrier will hold 10"x12" Swimmers and Shooters Cut plates. Click Here to view Spartan DL and Flex Fused Core™ IIIA Soft Armor Package

Spartan Armor Systems® Spartan DL Plate Carrier Specs:  Low-profile Minimalist Carrier Bottom-loading Design Supports The Plate In The Pocket 4″ Fully Adjustable Elastic Cummerbund 2” Low Profile Shoulder Adjustment Velcro On Front And Back For Name, Id, Blood Type, Etc. Material: 500 Denier Nylon/Pu Nylon Webbing Size: 11.4" X 12.5" Integrated Mag Pouches Hold M4 Mags As Well As A Pistol Mags (2 On Each Side) Note: Due to the extremely low profile design of the Spartan DL Plate Carrier, they WILL NOT ACCEPT SIDE PLATES. Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A. SPARTAN ARMOR SYSTEMS® SPARTAN DL PLATE CARRIER Product Overview When the environment you are operating in demands discretion and stealth, the Spartan Armor Systems® DL Plate Carrier offers minimalist features for extreme concealment. Virtually indiscernible when worn beneath loose clothing, these ultra-minimalist carriers are designed to fit with Spartan Armor Systems® Flex Fused Core Soft Armor Panels. Covert, comfortable, and concealed - the Spartan DL Plate Carrier is made for environments that demand maintaining a low profile. The Spartan DL Concealment carrier can also be worn overt (on the outside of clothing) and can accept hard armor such as Spartan™ Omega™ AR500, AR550, or Armis IIIA Hard Armor. Rugged, Reliable, Versatile The Low-profile design of the Spartan Armor Systems® DL Plate Carrier features bottom-loading plate insertion capability and a 4” fully adjustable cummerbund. This carrier comes in two sizes and can accommodate 10"x12" or 11"x14" body armor plates. The 500 Denier/Nylon blended material makes for an extremely durable, comfortable carrier that will flex and bend, contouring to your torso as you move throughout your day and activities. The inclusion of built-in soft Mag Pouches provides a tactical advantage. The Spartan DL Plate Carrier can accept AR Mags as well as a Pistol Mag (2 on each side) for versatility and quick access to your reloads.  Spartan Armor Systems® Spartan DL Plate Carrier Specs:  Low-profile Minimalist Carrier Bottom-loading Design Supports The Plate In The Pocket 4″ Fully Adjustable Elastic Cummerbund 2” Low Profile Shoulder Adjustment Velcro On Front And Back For Name, Id, Blood Type, Etc. Material: 500 Denier Nylon/Pu Nylon Webbing Size: 11.4" X 12.5" Integrated Mag Pouches Hold M4 Mags As Well As A Pistol Mags (2 On Each Side) Note: Due to the extremely low profile design of the Spartan DL Plate Carrier, they WILL NOT ACCEPT SIDE PLATES. SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards. Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.  Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A.

SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR   Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards.   Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.    Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A.

SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SHOOTERS CUT SET OF TWO Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Plate Weight (per plate): 8”x10” AR550 Shooters Cut: Base Coat 5lbs 5oz. Full Coat 6lbs 1oz. 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs.   Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.        

SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO   Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.    Chest Plate Weight (per plate):  8”x10” Plate: Base Coat 5lbs 13oz. Full Coat 6lbs 7oz 10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz. 11"x14" Plate: Base Coat 10lbs 1oz. Full Coat 11lbs 6oz. Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.   Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

SPARTAN™ OMEGA™ AR500 BODY ARMOR SWIMMERS CUT SET OF TWO   Product Overview Sleek, lightweight, and ready to move, the Swimmers Cut Spartan™ Omega™ AR500 Body Armor affords operators with increased mobility, a decrease in overall weight. The “Swimmers Cut” gets its name from the improved range of motion in the shoulders due to the angle of cut in the top corners of the plate. This allows for a lighter and less obstructive body armor plate while still providing coverage for vital organs. Swimmers Cut Spartan™ Omega™ AR500 Body Armor is constructed from lab certified AR500 ballistic grade steel, (¼” thickness) and these body armor plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. When the environment dictates speed and mobility as primary and critical factors, the Spartan omega AR500 Body Armor Swimmers Cut Plates are an excellent choice.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.   Exceptional Comfort & Engineering You have the choice of getting our AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved AR550 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.  Chest Plate Weight (per plate):  8x10 Plate: Base Coat 5lbs. Full Coat 5lbs 11oz. 10x12 Plate: Base Coat 7lbs 7oz. Full Coat 8lbs 1oz. 11x14 Plate: Base Coat 9lbs 2oz. Full Coat 10lbs 15oz. Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    Spartan™ Omega™ AR500 Body Armor Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.   *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.  

Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor is specifically designed to feature a streamlined cut, which reduces overall weight, enhances mobility, comfort, and ergonomics in the field while affording this higher degree of threat protection. SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SWIMMERS CUT SET OF TWO Product Overview Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor is specifically designed to feature a streamlined cut, which reduces overall weight, enhances mobility, comfort, and ergonomics in the field while affording this higher degree of threat protection. As with our other AR550 body armor products, Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.  IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.    Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Chest Plate Weight (per plate): 8x10 AR550 Swimmers Cut: Base Coat 4lbs 6oz. Full Coat 4lbs 14oz. 10x12 AR550 Swimmers Cut: Base Coat 6lbs 10oz. Full Coat 7lbs 8oz. 11x14 AR550 Swimmers Cut: Base Coat 8lbs 5oz. Full Coat 8lbs 13oz.   Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    AR550 Body Armor - Swimmers Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.  

SPARTAN™ OMEGA™ AR500 BODY ARMOR SINGLE PLATE With Full Coat Frag Mitigation Coating Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.   Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor! Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.   Chest Plate Weight (per plate):  8”x10” Plate: Base Coat 5lbs 13oz. Full Coat 6lbs 7oz 10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz. 11"x14" Plate: Base Coat 10lbs 1oz. Full Coat 11lbs 6oz. Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only Includes 1 Armor Plate Per Order Available in Shooters Cut or Swimmers Cut   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

FEATURES: Maxx-Dri Technology offers 100% breathability compared to traditional PCs Ultra Lightweight Ultra Fast Donning and Doffing Ideal for donning over a Police Uniform Lightning Fast Infinity Adjustment System for a truly Custom Fit Anti-Gravity weight management technology Heavy Duty Mil-spec construction Heavy Duty Genuine YKK buckles and straps Molle and Velcro Molle front and rear Front Velcro for ID patches Heavy Duty Rear Drag/Rescue Handle Available with rifle and pistol mag pouches and pistol holster (chest) (2) LEVEL 3+ AR550 10x12 Shooters Cut Plates This plate carrier was designed by 221B Tactical SIZING: One Size Fits All (Adjustable Heavy Duty Genuine YKK Side Release Buckles and Straps) Spartan Armor AR550 Level III+ Body Armor and 221B Tactical Phantom Plate Carrier Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.  Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection. FEATURES: Maxx-Dri Technology offers 100% breathability compared to traditional PCs Ultra Lightweight Ultra Fast Donning and Doffing Ideal for donning over a Police Uniform Lightning Fast Infinity Adjustment System for a truly Custom Fit Anti-Gravity weight management technology Heavy Duty Mil-spec construction Heavy Duty Genuine YKK buckles and straps Molle and Velcro Molle front and rear Front Velcro for ID patches Heavy Duty Rear Drag/Rescue Handle Available with rifle and pistol mag pouches and pistol holster (chest) (2) LEVEL 3+ AR550 10x12 Shooters Cut Plates This plate carrier was designed by 221B Tactical SIZING: One Size Fits All (Adjustable Heavy Duty Genuine YKK Side Release Buckles and Straps)

Soft Body Armor Panel available in 10×12 and 11×14 options SAPI style cut Lightweight CaliberX™ 10×12 15.8oz, 11×14 1lb 4oz Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Waterproof Interior sewn together for longevity Proudly made in the U.S.A Features Removable cummerbund with double layer Mil-Spec Velcro® Two (2) internal pouches on each side of cummerbund Fully adjustable shoulder straps Large soft side Velcro® area for placards Made with Mil-Spec IR Treaded 500D Cordura® Mil-Spec IR Treated Murdock Webbing® All of the fabrics, webbing and plastic hardware are treated at source to deliver the lowest I.R. signature possible Weight 1 lb Available in: Black, Coyote Tan, Ranger Green and MultiCam® The Low-Visibility Plate Carrier is made with high quality U.S. Mil-Spec sourced materials and designed by U.S. Veterans. Sizing:Regular: Fits 10×12” plates or soft armor panelsX-Large: Fits 11×14 plates or soft armor panels Caliber Armor CaliberX Ultra Light Weight Soft Armor With Concealment Carrier Soft Body Armor Panel available in 10×12 and 11×14 options SAPI style cut Lightweight CaliberX™ 10×12 15.8oz, 11×14 1lb 4oz Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Waterproof Interior sewn together for longevity Proudly made in the U.S.A Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density. We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing. NIJ STANDARD-0101.06 and .07 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2 MANUFACTURING TOLERANCES: Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%. Low-Visibility Plate Carrier This Low-Visibility Plate Carrier is low profile and designed to endure and outlast any mission. It is fully adjustable for size, comfort, and protection. The sides are made from double layer Mil-Spec elastic and incorporates two internal pouches on each side which can hold magazine pouches and/or communication tools. The shoulder and sides of the Low-Visibility Plate Carrier are fully adjustable with Velcro® closures.  Features Removable cummerbund with double layer Mil-Spec Velcro® Two (2) internal pouches on each side of cummerbund Fully adjustable shoulder straps Large soft side Velcro® area for placards Made with Mil-Spec IR Treaded 500D Cordura® Mil-Spec IR Treated Murdock Webbing® All of the fabrics, webbing and plastic hardware are treated at source to deliver the lowest I.R. signature possible Weight 1 lb Available in: Black, Coyote Tan, Ranger Green and MultiCam® The Low-Visibility Plate Carrier is made with high quality U.S. Mil-Spec sourced materials and designed by U.S. Veterans. Sizing:Regular: Fits 10×12” plates or soft armor panelsX-Large: Fits 11×14 plates or soft armor panels

Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA Predator Armor Level III Shooters Cut Predator Armor Level III Body Armor is manufactured in the U.S. using ballistic grade steel and has the option for a kevlar lined spall and fragmentation protective layer. Our plates use a unique heat-treating, quenching and tempering process that results in an extra hardened steel. Predator Armor plates are lightweight, impact-resistant steel that hold superior ballistic properties. This allows us to use thinner plates without sacrificing protection levels.  Our ballistic steel plate is tested to NIJ standards. All of our plates come with a base coat that aesthetically enhances the plate as well as provides durable characteristics. This coating does not provide fragmentation mitigation. You have the option to add kevlar lining to your plate. This provides anti spall and frag characteristics. It also enhances the performance of your plate. If your carrier does not have anti frag characteristics it is strongly advised to include the kevlar lining. Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA Our Testing Target is a smaller cut from the same material as the Level III Plates. It is an add on item you can order with your plates and test the body armor out for yourself. We guarantee our plates will meet the Level III standards. Add a test plate to your order and try it yourself. If it does not meet the standards we will refund your order.

SPECIFICATIONS Material: Ballistic steel of 650 hardness on the Brinell scale, with FragLock™ Coating Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10"x12" Base Coat Weight: 8 lbs Thickness: 0.31" Build-Up Coat Weight: 9.5 lbs Thickness: 0.56" 11”x14” Base Coat Weight: 10 lbs Thickness: 0.31" Build-Up Coat Weight: 11.5 lbs Thickness: 0.56" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III+ Body Armor The Level III+ Steel Plate (specifications below) is able to stop threats such as 7.62x39/7.62x51/5.56 M193s, 5.56 M855 penetrators, and .223/.308 WIN rounds. And unlike ceramic or polyethylene, Steel is able to take several hits from these rounds without fail. This multi-hit special threat resistance is the distinguishing quality of the Level III Plus. The plate features our patented Advanced Shooter Cut, which improves comfort and shooting ergonomics by affording you extra room for your rifle cut. It is available in both right and left-handed versions and is compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor (given you have an appropriate carrier size).  The included FragLock™ Coat is a feature special to our AR500 Armor plates, which we apply for two reasons: First, it helps reduce the dangers of spalling (when broken pieces of steel come off the plate) and fragmentation (when a bullet’s remains bounce off the plate), protecting you from the aftermath of a bullet’s impact once it has been stopped. Second, the coat gives our plates a maintenance-free shelf life of twenty years, which makes this steel plate last much longer than polyethylene or ceramic alternatives. The Base Coat, which all our plates come with by default, is lighter and thinner with less protection, while the Build-Up Coat can be added for greater protection but also slightly more weight. SPECIFICATIONS Material: Ballistic steel of 650 hardness on the Brinell scale, with FragLock™ Coating Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10"x12" Base Coat Weight: 8 lbs Thickness: 0.31" Build-Up Coat Weight: 9.5 lbs Thickness: 0.56" 11”x14” Base Coat Weight: 10 lbs Thickness: 0.31" Build-Up Coat Weight: 11.5 lbs Thickness: 0.56" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States