$1000 - $2000

Shellback Tactical SF Lightweight Armor System with Level III+ H3101 Plates The Shellback Tactical SF Lightweight Armor System is a super lightweight sized armor solution that provides level III+ threat protection. This kit features our SF plate carrier with two level III+ model H3101 plates. The Shellback Tactical SF Lightweight Armor System is the perfect kit for SWAT, SRT and military operations where mobility and function is paramount.  Kit Components  Shellback Tactical SF Plate Carrier x 1 Shellback Tactical Model H3101 Plates x 2 SF Plate Carrier Features  Constructed of durable 500 Denier Nylon  Front and rear plate pockets load from the bottom 3D Spacer mesh padding on front, rear and shoulder pads for comfort  Cummerbund has two integrated pockets for 6x6 or 6x8 Plates Cummerbund has integrated radio pouch for Police or MBITR radios with secure snap Cummerbund integrated padded comfort flap Extreme versatility with several PALS web attachment points covering the front, back and shoulders of the vest Front and Back areas of loop for placard identifiers Integrated kangaroo pouch accepts three .223/5.56 magazines Rear drag handle Heavy duty bar tacking at key stress points Fully adjustable shoulder straps to fit most sizes   Fully adjustable cummerbund to fit most sizes  Lifetime Warranty  GSA and TAA compliant SF Plate Carrier Sizing Chart  The below chart refers carrier size and the plates that fit each size. Small - 8.75" Wide x 11.75" Tall Medium - 9.5" Wide x 12.5" Tall Large - 10.25" Wide x 13.25" Tall XLarge - 11" Wide x 14" Tall Level III+ Model H3101 Plate Features  NIJ threat level III+ NIJ 0101.06 Certified Listed on NIJ Compliant Products List Special threat rated Single curve SAPI/ESAPI Cut Stand alone protection Single plate Ceramic and Polyethylene construction 600 Denier water resistant cover 10 year ballistic warranty Multihit rated 7.62 X 51 Nato (M80) - 6 Rounds 5.56X45 (XM 193) - 6 Rounds 5.56 X 45 SS109 (M855) - 6 Rounds 7.62 X 39 AK47 API BZ - 3 Rounds 7.62 X 39 AK47 MSC - 6 Rounds 7.62 x 54R LPS - 3 Rounds .300 Win Mag - 3 Rounds Sized Small - 8.75" Wide x 11.75" Tall Weight - 4.4lbs Medium - 10" Wide x 12.5" Tall Weight - 4.7lbs Large - 10.25" Wide x 13.25" Tall Weight - 5.5lbs XLarge - 11" Wide x 14" Tall Weight - 6.5lbs Rounds Defeated  357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  7.62 X 39 BALL  7.62 X 51 Nato (M80) 5.56X45 (XM 193) 5.56 X 45 SS109 (M855) 7.62 X 39 AK47 API BZ  7.62 X 39 AK47 MSC 7.62 x 54R LPS  .300 Win Mag 

Steel Challenge | Double Tap Ind. Our USPSA/SCSA Steel Challenge packages empower you to select the stage(s) and setup that best fit your needs. Each package is fully compliant with established standards and crafted from high-quality 3/8” AR500 steel, our targets are CNC laser cut. These targets are engineered for both home and competitive ranges, meeting the rigorous demands of Steel Challenge shooting. Designed to endure thousands of rounds from both pistols and rifles, they deliver reliable performance for competitive and casual shooters alike, allowing you to host Steel Challenge stages or complete competitions with confidence. Kit Includes: 3/8” AR500 Steel Targets (target variety dependent on stage selected) (Unpainted/Raw Steel) (Optional +$$) 2x4 Hangers (Optional +$$) 2x4 Bases (Spiked or H-Style) Pick Your Stage: Stage 1: Five to Go Stage 2: Showdown Stage 3: Smoke & Hope Stage 4: Outer Limits Stage 5: Accelerator Stage 6: Pendulum Stage 7: Speed Option Stage 8: Roundabout Practice Stage: Choose 1 of 8 Complete Package: All 8 Stages Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up a stage of the Steel Challenge, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the stage you choose, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Double Tap Industries’ enables customers to set up the Steel Challenge stage of their choosing while ensuring a professional and competition level challenge experience. Proudly made in the USA!

Five to Go – Stage 1 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 1 – Five to Go of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut & built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels, enduring thousands of rounds from both pistols and rifles. Kit Includes: (4) 10” AR500 Round Plates (Unpainted/Raw Steel) (1) 12” AR500 Round Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 1 (Five to Go) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 1 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Five to Go stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Five-Go Stage with confidence in your set up. Double Tap Industries’ Stage 1 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly made in the USA!

Showdown – Stage 2 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 2 – Showdown of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut & built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (2) 10” AR500 Round Plates (Unpainted/Raw Steel) (1) 12” AR500 Round Plate (Unpainted/Raw Steel) (2) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$)   Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 2 (Showdown) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 2 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Showdown stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Showdown Stage with confidence in your set up. Double Tap Industries’ Stage 2 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Smoke & Hope – Stage 3 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 3 – Smoke & Hope of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (1) 12” AR500 Round Plate (Unpainted/Raw Steel) (4) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 3 (Smoke & Hope) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 3 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Smoke & Hope stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Smoke and Hope Stage with confidence in your set up. Double Tap Industries’ Stage 3 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Outer Limits – Stage 4 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 4 – Outer Limits of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (3) 12” AR500 Round Plate (Unpainted/Raw Steel) (2) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 4 (Outer Limits) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 4 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Outer Limits stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Outer Limits Stage with confidence in your set up. Double Tap Industries’ Stage 4 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Accelerator – Stage 5 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 5 – Accelerator of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (1) 10” AR500 Round Plates (Unpainted/Raw Steel) (2) 12” AR500 Round Plate (Unpainted/Raw Steel) (2) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 5 (Accelerator) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 5 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Accelerator stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Accelerator Stage with confidence in your set up. Double Tap Industries’ Stage 5 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Pendulum – Stage 6 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 6 – Pendulum of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (2) 10” AR500 Round Plates (Unpainted/Raw Steel) (3) 12” AR500 Round Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 6 (Pendulum) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 6 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Pendulum stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Pendulum Stage with confidence in your set up. Double Tap Industries’ Stage 6 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Speed Option – Stage 7 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 7 – Speed Option of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (4) 12” AR500 Round Plate (Unpainted/Raw Steel) (1) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 7 (Speed Option) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 7 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Speed Option stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Speed Option Stage with confidence in your set up. Double Tap Industries’ Stage 7 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Roundabout – Stage 8 of Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is specifically designed for Stage 8 – Roundabout of the Steel Challenge Shooting Association's competition series. This package provides everything you need to set up the stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (5) 12” AR500 Round Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up Stage 8 (Roundabout) of the Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Stage 8 setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Roundabout stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run the Roundabout Stage with confidence in your set up. Double Tap Industries’ Stage 8 of the Steel Challenge ensures a professional and competition level challenge experience. Proudly Made in the USA!

Practice – Steel Challenge | Double Tap Ind. This USPSA/SCSA Steel Challenge package is a great way to practice and enables you to setup any 1 of the 8 stages of the Steel Challenge Shooting Association's competition series (Showdown, Smoke & Hope, Outer Limits, Speed Option, The Pendulum, 5 to Go, Roundabout or Accelerator). This package provides everything you need to set up a stage in full compliance with official standards. Made from high-quality 3/8” AR500 steel, our targets are CNC laser cut and built to meet the high demands of Steel Challenge shooting, making them ideal for both personal and competitive use. Whether you’re setting up a practice session or hosting an event, our targets deliver consistent, reliable performance for shooters at all levels. Kit Includes: (4) 10” AR500 Round Plates (Unpainted/Raw Steel) (5) 12” AR500 Round Plate (Unpainted/Raw Steel) (4) 18” X 24” AR500 Rectangular Plate (Unpainted/Raw Steel) (5) 2x4 Hangers (Optional +$$) (5) 2x4 Bases (Optional +$$) Choose your Setup: Targets + Spiked Stands (suggested): Want everything needed to set up 1 of 8 Steel Challenge Stages, then this is the setup for you. It provides all targets, complete stands and hardware needed. Our Steel Challenge Target Stands are designed for ease, precision, and compliance with regulation standards. With a built-in height adjustment of up to 6", you can quickly set your targets to the required heights (5’ - 6’ depending on the stage). The toolless height adjustment lets you fine-tune without needing to cut new 2x4s. The three-legged base with spiked feet ensures stability on different terrains. Lightweight and portable, this stand is easy to transport, set up, and store. Breaking it down is simple—just fold back the front arm and pin it, then remove the back legs using the locking pin. For setup, pin the back legs and adjust the front arm in 5-degree increments to get the perfect target angle and height, no matter the terrain. Cost-effective and versatile, it fits any standard 2x4, allowing for adjustable target heights. Secure the hanger and base to the 2x4 with the wing nut, and easily hang your targets using the provided Grade 8 hardware and harmonic springs. All components are powder-coated black for durability and a sleek finish. This package includes everything you need—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitions, and range operators. Targets + H Stands: Looking for a complete Steel Challenge Practice setup but worried about breaking the bank? This Steel Challenge package by Double Tap Industries has you covered. It includes all targets, stands, and hardware needed for the Practice (1 of 8) stage, designed with an emphasis on ease and precision. This option features our H-Style Steel Challenge Target Stands, built for a straightforward setup at a lesser cost. Constructed for long-lasting durability, each stand is powder-coated black, adding a sleek finish and rust resistance for extended use. Compatible with any standard 2x4, and featuring built-in spikes inside the base, this base keeps your wood posts upright and stable, reducing target movement and allowing you to focus on honing your accuracy and speed. Easily hang your targets with our provided stand hangers, attach the Grade 8 hardware and harmonic springs to your targets and the hangers, then fasten the hangers to the 2x4s with a convenient wing nut. This complete package offers everything you need to get started—except the 2x4’s—making it an ideal solution for shooting enthusiasts, competitors, and range operators alike. Durable, versatile, and made for precision, this setup is engineered for consistent performance and ultimate convenience. Targets + 2x4 Hangers: The 2x4 Target Hanger is a budget-friendly solution for shooters looking to make the most of their existing gear. Designed to hang targets on any standard 2x4 stand or base, it lets you use your current equipment without needing to invest in additional stands. The harmonic spring and carriage bolt setup provides clear, responsive feedback with every hit, enhancing your shooting experience. This hanger is easy to secure—just tighten the wing nut on the back to fasten it to the 2x4. Built for durability, it's powder-coated in black for weather resistance, and the Grade 8 hardware ensures long-lasting, reliable performance. By offering compatibility with your current setup, this hanger not only saves you money but also ensures a dependable and efficient shooting range. Targets Only: This targets-only option is perfect for shooters or range owners who want to refresh their range without the need for a full overhaul. Utilize your existing equipment or explore our premium selection of target stands and hangers for a fully customizable shooting experience. The Double Tap Ind. Steel Challenge Targets provide long-lasting performance and versatility. Run any stage of the Steel Challenge with confidence in your set up. Double Tap Industries’ Practice option enables customers to setup the Steel Challenge stage of their choosing while ensuring a professional and competition level challenge experience. Proudly Made in the USA!

Double Tap Industries 3/8" AR500 Texas Star – The Ultimate Spinning Reactive Target Put your speed, accuracy, and timing to the test with the Double Tap Industries Texas Star — a rugged, precision-built reactive target designed to elevate your range day. Featuring five 8" paddles mounted on rotating arms, the Texas Star spins with every successful hit. As each paddle drops, the balance shifts, creating unpredictable movements that force you to stay sharp and adjust on the fly. What makes our Texas Star stand out? Every surface with the potential for bullet impact is made from 3/8" AR500 steel, ensuring maximum durability and shooter safety — regardless of whether you're using pistol or rifle (refer to our Ammo Caliber Chart for suggested safe distances). Want to take your challenge to the next level? Upgrade your Texas Star to a 10-paddle configuration and double the action. This optional upgrade includes five additional 6" paddles, along with the necessary arms and mounting hardware to complete the transformation. The 6" paddles present a smaller, faster-moving target, pushing your precision and timing even further. It’s a perfect option for advanced shooters looking to intensify their training—or just add a new layer of fun and unpredictability to every shot. Key Features: Fully reactive system – Five 8" paddles drop when hit, causing the star to spin dynamically. Optional 10-Paddle Upgrade – Add five more 6" paddles with arms and hardware to increase difficulty and variety. 3/8” AR500 Shot-Facing Surfaces – Paddles, arms, and stand face are all built tough for years of use. Dual-Bearing Rotation – Delivers smooth, consistent spinning action that responds naturally to hits. No-Fall False Hits – Arm and body hits won't drop paddles, only direct hits do the job. Hand-Lever Paddle Reset – Reinstall paddles quickly and safely—no risk of getting pinched by the arm springs. Adjustable Shooting Angle – Choose between upright (90°) or forward-leaning (15°) mount positions. Fine-tune with the front leg in 5° increments for perfect placement on uneven ground. Spiked Ground Base – Locks in securely to resist tipping or shifting under repeated impacts. Durable Finish – Paddles, arms, and stand face are raw AR500; all other stand components are powder-coated black. Grade 8 Hardware – Heavy-duty fasteners for long-term reliability and performance. Ships Partially Assembled – Easy setup so you’re on the range faster. This Texas Star isn’t just a target—it’s a challenge that fights back. Whether you're a competitive shooter or just love next-level range days, the Double Tap Industries' Texas Star delivers excitement, durability, and serious skill-building potential. Shoot smarter & train harder with the Double Tap Industries Texas Star.