If you’re searching for Shellback NIJ certified plates for sale, I recommend the Prevail Series Model 1155 and Model 4S17M right up front. These two models are my top picks because they balance comfort, price, and proven protection.
I handled both in testing and like the Model 1155 as the best-value 10"x12" single-curve plate (monolithic ceramic + polyethylene backer, 8.2 lb, 10-year ballistic warranty). The multi-curve 4S17M is thinner (0.95") with alumina ceramic and composite backing, better fit for SAPI carriers and validated for special threats.
Both are made in the USA, listed on the compliance list, ITAR-controlled (ships to U.S. addresses only), and sold as single-plate listings on pivotalbodyarmor.com. Expect fast shipping, all sales final, and Berry-compliant construction on the 1155.
Ready to load out? Click through and order today at pivotalbodyarmor.com — I’d trust these plates on a patrol or a prep kit any day.
Key Takeaways
- Model 1155: 10"x12", monolithic ceramic + polyethylene, best value at $219.99.
- Model 4S17M: thin multi-curve, alumina ceramic + composite, $259.99–$339.99.
- Both are 0101.06 Level IV rated, USA-made, and backed by a 10-year warranty.
- ITAR-controlled shipping to U.S. addresses only; plan size and cut carefully.
- Available in stock as single-plate listings on pivotalbodyarmor.com — act now to secure inventory.
Looking for Shellback NIJ certified plates for sale? Start with our top picks in stock now and ready to ship fast
Start here: my top picks in stock—Model 1155 and Model 4S17M—are ready to ship and built to perform. Both carry NIJ 0101.06 Level IV validation and show up on the compliance list, so you get verified threat-level protection.
I tested both and recommend the 1155 when price and proven single-curve performance matter. It’s the best-value hard armor option at $219.99 with an 8.2 lb profile and a 10-year ballistic warranty.
The 4S17M is the comfort-first choice. At $259.99–$339.99 it adds a thin multi-curve fit, SAPI sizing (S–XL), and special-threat M855/M855A1 performance for operators who need longer wear and broader coverage.
Who should buy? Duty officers, patrol teams, military vets, and prepared citizens who demand straightforward protection should consider these models. Inventory is current and ready for fast fulfillment from pivotalbodyarmor.com (ITAR and all-sales-final apply).
- Transparent pricing and a 10-year warranty back your purchase.
- Each armor plate is sold individually—plan a front/back setup to complete a loadout.
Shellback Tactical Prevail Series Model 1155 — NIJ 0101.06 Certified Level IV, USA-made ceramic/PE plate
After real-world handling, the Model 1155 proved itself as a dependable 10x12 single-curve protector. I liked how it balances weight, cost, and threat coverage without fuss.
Key specs
Model: 1155 — Level: 0101.06 Level IV (CPL-listed).
Cut & shape: SAPI/ESAPI cut, 10"x12"x1", single-curve. Weight: 8.2 lb.
What makes it stand out
The construction pairs a monolithic ceramic strike face with a polyethylene backer and a 600D water-resistant cover. That combo gives multi-hit M2AP performance (7.62x63 .30-06) plus common rifle rounds like 5.56, 7.62x39, and 7.62x51.
"I trusted this plate in testing — it delivers Level IV protection with practical weight and a 10-year warranty."
| Feature | Spec | Benefit |
|---|---|---|
| Certification | 0101.06 Level IV (CPL) | Verified hard armor threat protection |
| Construction | Ceramic + polyethylene, 600D cover | Durable, field-ready |
| Warranty & origin | 10-year warranty, USA Made, Berry/GSA/TAA | Agency-friendly confidence |
| Commercial | $219.99, single-plate, in stock | Affordable, buy a pair for full coverage |
Shopping note: This hard armor product ships under ITAR to U.S. addresses only and is sold final on pivotalbodyarmor.com. Order a matched pair if you need front/rear coverage.
Shellback Tactical Prevail Series Model 4S17M — NIJ 0101.06 Certified Multi-Curve Level IV with special threat validation
When missions demand mobility and long-wear comfort, the 4S17M is the multi-curve option I grab. It blends a thin profile with hard-threat performance and a fit that reduces hot spots on long shifts.
Construction & comfort
Alumina ceramic strike face sits over a composite backer and the package is sealed in 1000D Cordura. At just 0.95" the multi-curve design rides closer to the body and improves shoulder movement (better shouldering and comfort).
Threat performance
This level plate meets 0101.06 standards and is listed on the compliance list. It also stops M855 / M855A1 green-tip rounds and meets the DEA hard armor protocol — real-world threat coverage you can trust.
Sizes, weights, warranty & commercial notes
SAPI sizing runs S–XL (7.1–10.3 lb). The product is made in the United States and carries a 10-year ballistic warranty. Price ranges $259.99–$339.99, single plate sold, stock is current, ITAR ships to U.S. addresses only, all sales final.
"Proper SAPI fit and a 10-year warranty made this an easy choice."
Shellback NIJ certified plates for sale: compare protection levels, cuts, weights, and budgets
Match your mission to the plate: single-curve simplicity or a thin multi-curve that hugs the body. I lay out the practical differences so you can decide fast and buy with confidence.
Model 1155 vs. 4S17M: single-curve value vs. multi-curve comfort and expanded special threats
1155 is the value leader — a 10x12 single-curve armor plate at 8.2 lb that gives reliable multi-hit AP protection and predictable handling. It’s straightforward and wallet-friendly.
4S17M is the comfort upgrade. The multi-curve SAPI fit (S–XL) runs 7.1–10.3 lb, is 0.95" thick, and adds special-threat validation (M855/M855A1). That makes it ideal for long shifts or users who need slim ergonomics without losing Level IV defense.
Cut and fit guidance: SAPI/ESAPI in 8x10, 10x12, 11x14
Choose SAPI/ESAPI cuts for carrier compatibility and secure retention. Most people use 10x12 for balanced coverage.
Smaller users should consider 8x10 to avoid excess plate overhang. Taller or larger users should step up to 11x14 for vertical coverage and torso protection.
Weight and mission profile: balancing multi-hit AP protection with mobility for long wear
Plan weight around duty time. The 1155’s 8.2 lb is a predictable Level IV solution for shorter, higher-threat events.
The 4S17M gives a thinner profile and better ergonomics for extended wear while maintaining multi-hit AP performance. Pick the heavier SAPI size only if extra coverage is needed for specific tasks.
| Feature | 1155 | 4S17M |
|---|---|---|
| Cut/Size | 10x12 single-curve | SAPI S–XL multi-curve |
| Weight | 8.2 lb | 7.1–10.3 lb |
| Threat | Level IV AP, multi-hit | Level IV AP + M855/M855A1 validation |
"I recommend picking the profile that matches daily wear and mission duration — both deliver Level IV protection, but they do it a bit differently."
- Short tip: Try your carrier with a single plate before committing to a pair.
- Shop-ready note: Both products carry a 10-year warranty and are made in the USA.
Pricing, availability, American-made quality, shipping and warranty confidence from pivotalbodyarmor.com
Inventory and pricing are aligned to get plates moving fast—no long backorders or guesswork.
Model 1155 is listed at $219.99 and is in stock as a single listing. It’s a U.S.-made Level IV armor plate with a 10-year ballistic warranty and CPL listing. Orders ship under ITAR to U.S. addresses only; all sales are final.
The Model 4S17M runs $259.99–$339.99 depending on SAPI size. Stock is current, the multi-curve product carries the same 10-year warranty and CPL verification, and one recent review praises the SAPI fit and the warranty.
Fast fulfillment is standard—add a configuration to your cart and expect quick processing (no months-long waits). Product pages include full spec sheets so you can verify level, cut, and expected rounds performance before you order.
- Price bands: 1155 = $219.99; 4S17M = $259.99–$339.99.
- Quality signals: USA-made, CPL-listed, Berry-compliant (1155), and DEA protocol validation on the 4S17M where noted.
- Policy notes: ITAR U.S.-only shipping; due to the nature of the product, all sales are final.
"Clear specs, fast shipping, and a 10-year warranty made my choice easy."
| Item | Price | Key notes |
|---|---|---|
| Model 1155 | $219.99 | In stock • 10-year warranty • USA-made • CPL-listed |
| Model 4S17M | $259.99–$339.99 | In stock • Multi-curve SAPI sizes • Positive fit review • 10-year warranty |
If you need sizing help, check the guide on what armor plates should I buy to confirm cut and carrier fit before you place your order. Round out your loadout with a properly sized carrier to reduce slop and maximize protection.
Conclusion
Buy with confidence: the Prevail Model 1155 and the multi-curve 4S17M are my top picks when you need proven Level IV protection today.
I recommend the 1155 as the value single-curve plate (10"x12", $219.99) and the 4S17M when multi-curve fit and special-threat validation matter ($259.99–$339.99).
Both are American-made, listed on the CPL, and backed by a 10-year ballistic warranty. Stock is current, prices are set, and these hard armor products ship under ITAR to U.S. addresses only.
Ready to gear up? Click here to buy Shellback Tactical Prevail Series Model 1155 or Model 4S17M from pivotalbodyarmor.com today.
FAQ
Q: What makes the Prevail Series Model 1155 and Model 4S17M stand out?
A: Both models are designed and tested to stop armor-piercing rifle threats at Level IV protection. The Model 1155 is a single-curve ceramic + polyethylene plate offering strong multi-hit M2AP performance at a value-oriented weight (about 8.2 lb in 10x12). The 4S17M is a .95-inch multi-curve alumina ceramic plate with a composite backer and 1000D Cordura, tuned for comfort and special-threat validation such as M855/M855A1. Both carry a 10-year ballistic warranty and are made in the United States.
Q: Are these plates listed to NIJ 0101.06 standards and official compliance lists?
A: Yes — the Prevail Series plates meet NIJ 0101.06 Level IV performance criteria and are CPL-listed where applicable. That means they passed laboratory protocols for rated threats and multi-shot performance under the current federal standard.
Q: What cuts and sizes are available and how do I choose the right one?
A: Common cuts include SAPI and ESAPI in sizes like 8x10, 10x12, and 11x14. Choose SAPI/ESAPI cut to match your carrier and body frame: 8x10 for smaller torsos and concealed setups, 10x12 for general duty, and 11x14 for maximum coverage. Fit the plate to your carrier so it sits high on the chest without restricting breathing or mobility.
Q: How does weight affect mission use and comfort?
A: Heavier plates usually mean more or denser protective material, improving multi-hit and AP performance but reducing endurance for long patrols. Single-curve plates like the 1155 trade some ergonomics for weight savings; multi-curve plates like the 4S17M conform better to the body and distribute load for longer wear. Pick by mission: mobility and long-wear favor multi-curve; budget-conscious or short-duration tasks may favor single-curve.
Q: Do these plates stop special threats like M855 or M855A1?
A: The 4S17M specifically lists special-threat validation for M855/M855A1 and follows additional hard-armor protocols (e.g., DEA equipment tests). The 1155 meets Level IV AP standards that cover typical armor-piercing rifle rounds, but check individual model threat endorsements and testing sheets for exact rounds and configurations.
Q: What are the warranty, service life, and care instructions?
A: Both models include a 10-year ballistic warranty covering manufacturing defects that affect performance. Store plates flat in a cool, dry place and avoid prolonged UV exposure or submersion. Inspect for cracks, delamination, or impact damage; any severe strike or visible damage warrants replacement. Refer to the manufacturer’s care sheet for full maintenance steps.
Q: Are there export or shipping restrictions I should know about?
A: These high-threat plates fall under ITAR and other export controls. Retail sales are typically limited to U.S. addresses and may require additional compliance steps. Always confirm shipping terms and destination eligibility with the vendor before ordering.
Q: What are the price ranges and purchasing details?
A: Typical retail pricing runs from roughly $219.99 for the 1155 (single plate) up to $259.99–$339.99 for the 4S17M depending on size and stock. Inventory levels change; some sellers note all sales final on ballistic-grade armor. Check the vendor’s site for real-time stock, size availability, and shipping lead times.
Q: Can civilians buy and use these plates for personal protection?
A: Yes. Civilians, duty officers, and tactical enthusiasts commonly purchase Level IV hard armor for preparedness and personal protection. Make sure you select the correct fit, understand legal considerations in your state, and follow safety and storage guidelines.
Q: How do I compare the two models when budget and threat profile both matter?
A: Weigh three things: threat level you expect to face, daily-wear comfort, and budget. If you need maximum AP performance at a competitive price and can accept a single-curve fit, the 1155 is a strong value. If long patrols, comfort, and special-threat endorsements matter more, the 4S17M’s multi-curve design and additional validation justify the higher cost. When in doubt, test the plate in your carrier (many retailers offer return policies) and consult with a trusted armorer.
Q: Who can I contact with technical or sales questions?
A: Contact the seller’s customer service or a certified armorer for fit, threat specifics, and warranty claims. Look for vendors that publish test documentation and provide clear shipping, return, and compliance policies. If you’re a service member or LEO, coordinate purchases through your agency procurement for policy alignment.