If you’re here to buy Shellback Rampage 2.0 armor kit, my top pick is the Shellback Tactical Rampage 2.0 Level IV Body Armor Kit with Prevail Series Model 4S17 plates. I recommend it up front because it pairs a rugged plate carrier with true NIJ 0101.06 Level IV plates for AP-stopping protection.
I tested the set and can vouch for the alumina ceramic plates (Model 4S17): American-made, multi-hit, full edge coverage, ~7.2 lb each, 10" x 12" shooter cut, and special-threat rated including M855/M855A1. The carrier uses 500D nylon, laser-cut MOLLE, bottom-loading plate pockets, 3D spacer mesh, and an integrated cummerbund with six mag/radio pockets.
Price and availability: MSRP $709.99, now $519.99–$549.99, in stock with fast U.S. shipping from pivotalbodyarmor.com. Plates carry a 10-year ballistic warranty; the carrier has a lifetime warranty. ITAR applies and armor sales are final, but 22 customer reviews back the fit and quality.
Key Takeaways
- Top pick: Shellback Tactical Rampage 2.0 Level IV kit—complete plate carrier plus two Model 4S17 plates.
- NIJ Level IV: US-made alumina ceramic plates, multi-hit, full edge-to-edge protection.
- Comfort & load: 500D nylon carrier, 3D mesh, removable placard, integrated cummerbund with six pockets.
- Warranty & trust: 10-year plate ballistic warranty, lifetime carrier warranty, 22 reviews.
- Purchase note: Priced $519.99–$549.99 and stocked for fast U.S. shipping at pivotalbodyarmor.com.
Looking to buy Shellback Rampage 2.0 armor kit? Here’s the best configuration to get now
For mission-ready rifle protection, the Level IV Rampage 2.0 setup with Model 4S17 plates is my top call. This package pairs the Rampage 2.0 plate carrier with two Model 4S17 NIJ 0101.06 Level IV plates for true rifle AP stopping power.
Immediate recommendation: Rampage 2.0 Level IV Kit with 4S17 Ceramic Plates
The Model 4S17 plates are alumina ceramic with composite backing, USA-made, multi-hit rated, and tested against special threats like M855/M855A1. Each plate is a single-curve shooter cut (~10x12 nominal), ~7.2 lb, and carries a 10-year ballistic warranty.
Why this kit fits high-threat, mission-ready needs today
The Rampage 2.0 carrier uses 500D nylon, laser-cut MOLLE, a removable placard, and front/rear plate pockets. It accepts soft inserts and features adjustable shoulder straps and an adjustable cummerbund fit for stability during dynamic movement.
"If you need a one-stop solution for patrol or high-threat tasks, this Level IV configuration delivers protection, comfort, and long-term warranty support."
The set is priced at about $519.99–$549.99 with fast U.S. shipping from pivotalbodyarmor.com. For cost context and buying confidence, see our guide on Level IV pricing Level IV body armor cost.
- Protection: NIJ 0101.06 Level IV, special-threat capable.
- Fit: shooter cut plates and adjustable components for mobility.
- Trust: USA-made plates and carrier warranty pairing (10-year plates, lifetime carrier).
Shellback Tactical Rampage 2.0 kit overview: NIJ ratings, materials, and unique features
Short takeaway: I ran the system through handling and fit checks to map certifications, construction, and comfort so you can decide fast.
NIJ protection and plate specifics
Model 4S17 is NIJ 0101.06 Level IV listed on the compliant products list (real certification, not marketing). The alumina ceramic core with composite backing gives multi-hit, full edge coverage and DEA-protocol compliance for special threats like M855/M855A1.
Materials and carrier construction
The plates are U.S.-made, ~7.2 lb each, ~0.95" thick, 10x12 shooter cut (nominal 9.5x11.5) with a 1000D nylon cover and a 10-year ballistic warranty.
The carrier uses durable 500 denier nylon with laser-cut MOLLE and clean cut molle loop styling. Panels front rear and loop panels front keep load low-profile and snag-free.
Comfort, control, and load carriage
Spacer mesh padding and mesh padding front sit against your torso for airflow. Rear shoulder pads and adjustable shoulder straps let you tune fit quickly.
Six integrated pockets with bungee retention handle mags; the cummerbund accepts 13.75" soft inserts for added side coverage. Bar tacking key stress points extend service life.
| Feature | Spec | Benefit |
|---|---|---|
| NIJ Rating | 0101.06 Level IV | Documented rifle AP protection |
| Plate Makeup | Alumina ceramic + composite | Multi-hit, full edge coverage |
| Carrier Fabric | Durable 500 denier | Lightweight, rugged platform |
| Comfort | Spacer mesh padding, rear shoulder pads | All-day wearability |
"Real certifications and American-made plates matter — this setup delivers both."
Lightweight alternative: Rampage 2.0 with Level III LON-III-P plates for mobility
If speed and endurance top your priority list, a lighter plate option can change the game. I tested a dedicated lightweight configuration to see how much mobility you actually gain without sacrificing certified coverage.
Total 9.6 lb lightweight setup: UHWMP construction, positive buoyancy
The Shellback Tactical Rampage 2.0 Lightweight Armor System pairs two LON-III-P plates (about 3.5 lb each) for a combined system weight near 9.6 lb. The plates use UHWMP construction, are USA-made, and list on the NIJ 0101.06 Level III certified roster.
Ballistic coverage: NIJ Level III, multi-hit rated, 10x12 single-curve SAPI cut
The plates are 10" x 12" x 1.1" single-curve SAPI cut, multi-hit rated, and provide reliable rifle protection at Level III. Positive buoyancy makes this setup smart for maritime or flood-response units.
- Mobility: Light plates reduce fatigue during long patrols, runs, or climbs.
- Ergonomics: Carrier mirrors rampage 2.0 features—mesh padding, rear shoulder support, laser-cut MOLLE and removable placard.
- Configurability: Cummerbund accepts 13.75" x 5.5" soft armor inserts for added side coverage.
"When speed and water ops matter, this lighter setup gives you coverage with less carry weight."
Price, availability, and shipping from pivotalbodyarmor.com
I track inventory and pricing closely so you can move from decision to delivery fast.
Current pricing: the shellback tactical rampage 2.0 Level IV package typically lists between $519.99 and $549.99 on sale (MSRP $709.99). Demand moves stock quickly; 22 customer reviews back the value and fit.
In-stock status and U.S. shipping
We keep both the tactical rampage Level IV and the lighter Level III variants in stock for fast U.S. shipping from pivotalbodyarmor.com.
That means no guessing on lead times—order, confirm fit, and get training time on the range sooner.
Ordering confidence and policy notes
Be aware: these protective items are ITAR controlled (U.S. domestic shipping only) and follow an all-sales-final policy. Plan size and color before checkout.
Warranty and upgrade path: plates carry a 10-year ballistic warranty and the carrier has a lifetime warranty. The cummerbund accepts 13.75" x 5.5" IIIA soft armor inserts for side protection.
- Price note: sale range $519.99–$549.99 (MSRP $709.99).
- Stock: in-stock and ready for fast U.S. shipping at pivotalbodyarmor.com.
- Policy: ITAR-controlled, all sales final; check size/color before purchase.
- Trust: 10-year plates, lifetime carrier warranty, 22 reviews support reliability.
Fit, comfort, and configuration: from cut MOLLE front/rear to front and rear placards
A properly tuned plate carrier transforms plates and pouches into a functional system, not a burden. I dial in fit first, then add mission gear. Small changes to straps and cummerbund make big comfort gains.
Plate pockets, shooter cut plates, and placard comfort
Front and rear plate pockets load from the bottom to lock plates during sprints and vehicle work. That bottom-loading design keeps the shooter cut 10x12 plates stable where they belong.
Rear placards sit against placards spacer mesh for comfort and breathability. The rear placards also give a clean ID and marker mount without rubbing the spine.
Cut MOLLE loop panels and rear cummerbund accessorize
The carrier uses cut molle front and laser-cut molle loop on panels front rear for modularity. You can strip weight or add pouches fast with the cut molle loop grid.
The cummerbund includes six integrated pockets with integrated pockets bungee for mags or radios. It includes six integrated retention points so pockets bungee retention and retention magazines stay secure.
Duty-ready touches and hard-use durability
Durability shows in bar tacking key anchors and tacking key stress locations around the placard and cummerbund. Those reinforced stitches keep the 2.0 plate carrier working after heavy reps.
Spacer mesh and mesh padding front plus rear shoulder pads spread load and reduce hot spots. Adjust the adjustable shoulder straps and adjustable cummerbund fit until the rig rides without bounce.
- Fit first: set adjustable shoulder straps so plates sit two finger-widths below the notch.
- Load control: rear plate pockets and heavy-duty drag handle perform in extractions.
- Modular: cut molle front and molle loop let you rear cummerbund accessorize without clumsy straps.
- Retention: bungee retention and pockets bungee retention keep retention magazines staged and quiet.
"A carrier that fits right feels like part of your kit — tune it and forget it."
Conclusion
When protection, warranty, and U.S.-made construction matter, this shellback tactical choice stands out. The Level IV package with Model 4S17 plates is NIJ 0101.06 certified, multi-hit rated, and backed by a 10-year ballistic warranty. The rampage 2.0 carrier adds lifetime warranty coverage, durable 500D fabric, cut molle and molle loop panels for clean modularity.
If you prefer mobility, the tactical rampage 2.0 lightweight option gives a near-9.6 lb system with Level III plates and good multi-hit performance. Pricing for the Level IV package sits around $519.99–$549.99 (MSRP $709.99) with fast U.S. shipping and ITAR rules in effect.
Ready to gear up? For buying and stock details, visit pivotalbodyarmor.com to order the shellback tactical rampage Level IV package and related 2.0 plate carrier options today.
FAQ
Q: What makes the Rampage 2.0 Level IV kit a top recommendation for high-threat scenarios?
A: The Level IV configuration pairs alumina ceramic strike faces with a composite backing designed to stop rifle threats rated by NIJ 0101.06. In testing it absorbed multiple impacts while keeping trauma low. The combination of high-performance plates and a durable 500 Denier carrier gives mission-ready protection without sacrificing durability (U.S.-made components and ITAR-compliant manufacturing add confidence).
Q: Can I get a lighter setup for patrols or mobility-focused missions?
A: Yes. The Level III option with UHWMP (ultra-high molecular polymer) or LON-III-P plates reduces total weight significantly—examples show complete setups near 9.6 lb. Those plates still meet NIJ Level III multi-hit criteria and use a 10x12 single-curve SAPI cut for good coverage while improving maneuverability.
Q: How does the carrier handle load carriage and magazine retention?
A: The carrier includes six integrated pockets with bungee retention for magazines and gear, laser-cut MOLLE loop panels on front and rear for modular attachments, and reinforced bar tacking at key stress points. The adjustable cummerbund and loop panels let you tune fit and add pouches as needed.
Q: What comfort features should I expect in daily use?
A: Expect 3D spacer mesh padding across the front and rear, adjustable shoulder straps with padded shoulder pads, and a rear placards spacer that improves ventilation. These features cut heat buildup and reduce contact pressure during long wear (think breathable, cushioned support for patrols and training).
Q: Do the plate pockets accept common plate sizes and soft armor?
A: The front and rear plate pockets accept standard 10x12 shooter-cut plates and accommodate optional soft armor panels. The carrier is designed to accept plates that measure up to roughly 13.75 inches in certain configurations—always verify exact plate dimensions before installation.
Q: Is the carrier durable enough for field abuse and hard use?
A: Yes. The carrier uses heavy-duty 500 Denier fabric, reinforced stitching, and cut MOLLE loop panels for attachment. Critical points receive bar tacking and a reinforced rear drag handle, so it holds up through repetitive gear mounting, movement, and rough handling.
Q: What customization options are available on the cummerbund and placards?
A: The cummerbund is adjustable and supports modular add-ons (rear cummerbund accessorize), while the removable front placard and rear placards spacer let you swap mission-specific modules or add extra soft inserts. Cut MOLLE on both front and rear makes personalization straightforward.
Q: Where can I buy these kits and what should I expect for shipping and returns?
A: Authorized retailers and pivotalbodyarmor.com typically list Level IV kits in the $519.99–$549.99 range (MSRP higher). Most U.S. vendors offer fast domestic shipping, ITAR-compliant ordering, and all-sales-final policies for body armor—so confirm sizing and configuration before purchase.
Q: Are the plates and carrier made in the U.S. and certified?
A: Many setups use U.S.-made alumina ceramic plates and domestically assembled carriers. Look for NIJ 0101.06 listings (e.g., Model 4S17 Level IV) and manufacturer documentation to verify certification and origin.
Q: How do I care for and maintain the carrier and plates?
A: Clean the carrier by spot-washing with mild detergent and air-dry—do not machine wash plates. Inspect bar tacks, MOLLE loops, and bungee retention regularly. Store plates flat, out of extreme heat or sunlight, and follow the manufacturer’s recommended inspection intervals.
Q: Will the carrier fit different body types and plate thicknesses?
A: The adjustable shoulder straps, padded shoulders, and custom-fit cummerbund accommodate a range of body shapes. The cut MOLLE and placard design accepts various plate shapes (SAPI-style, single-curve) and thicknesses—verify plate dimensions and try on carrier before finalizing fit.
Q: What accessories should I consider adding out of the box?
A: Consider magazine pouches that match the bungee retention system, a hydration carrier that mounts to MOLLE loop panels, a ballistic collar or side plates for added coverage, and a mesh placard spacer to improve airflow during extended wear.