Shellback Tactical Banshee 3.0 Level IIIA Model CLCIIIA Soft Armor Cummerbund Insert - Set of 2
from $254.99
$279.99
Proudly Made in the USA and Berry Compliant: Support American industry while you ensure you're equipped with superior, locally-produced gear.
NIJ 0101.06 Certified: Be confident that you're shielded by armor that meets the most rigorous industry safety standards, designed to keep our nation's bravest safe.
Lightweight, Yet Robust Protection Against Handgun Rounds: Don't compromise on mobility or safety. This armor is light, allowing you to move freely and stay agile, while providing robust protection against common handgun threats.
Constructed from High-Performance Woven Aramid Fibers: Rely on the strength of woven aramid fibers, crafting armor that can withstand the intensity of the field while keeping weight to a minimum.
Water-Resistant Sonobond Sealed Ripstop Cover: Enhance your armor's durability and longevity with a ripstop cover, designed to keep the elements at bay, so your armor stays reliable, even in challenging conditions.
Discover superior protection with the Shellback Tactical Level IIIA Model CLCIIIA Banshee Elite 3.0 Soft Armor Package. Manufactured in the USA and Berry Compliant, this package is tailored to flawlessly fit the Banshee Elite 3.0 plate carrier, providing an optimal balance of safety and comfort.Boasting NIJ 0101.06 certification, this lightweight soft armor package guarantees ballistic protection against common handgun rounds. This level of safety assurance lets you concentrate on the mission at hand, knowing you're well-protected. Available in three configurations, the package offers the flexibility to match your unique needs. You can choose from a plate backer set of two, cummerbund insert set of two, or the complete set, allowing for personalization of your protective gear.Composed of woven Aramid fibers, the armor is lightweight yet robust, presenting an aerial density of 1.55 PSF and thinness of .35". The protective cover, featuring Sonobond sealed ripstop, ensures water resistance, adding to the longevity and durability of the product.The armor comes with a five-year ballistic warranty, reflecting the confidence in its quality and performance. Note: This item is ITAR controlled and can only be shipped to US addresses. Due to the nature of this product, all sales are final.Stay shielded and order the Shellback Tactical Level IIIA Model CLCIIIA Banshee Elite 3.0 Soft Armor Package today, because your safety is their topmost priority.
Rounds Defeated
CARTRIDGE
PROJECTILE
VEL (ft/s ± 30)
VEL (m/s ± 9)
.357 SIG (NIJ06)
125 gr FMJ
1470
448
.44 Magnum (NIJ06)
240 gr SJHP
1430
436
.357 Magnum
158 gr JSP
1430
435
.44 Magnum
240 gr SWCGC
1400
426
9 x 19 mm Parabellum
124 gr FMJ RN
1400
426
40 S&W
180 gr FMJ
1155
352
LEGAL
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Spartan AR550 Body Armor And Sentinel Plate Carrier Package
$374.54
$394.25
SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER
Product Overview
The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.
Ready For Anything
Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike.
Spartan Armor Systems® Sentinel Plate Carrier Specs:
Adjustable from 38" To 48" Chest Size
Durable Emergency Drag Handle
Anti-slip Shoulder Padding With Velcro
Side Release Buckles On The Internal Waist Strap
Padded Mesh Separators For The Interior Of The Carrier For Breathability
Fits 10" X 12" Shooters Cut Plates
Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor
Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side
Velcro On The Back Of The Carrier Measures 9” X 3”
Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time
1000 Denier
Bottom Loading
Weighs Approximately 2lbs. 9oz.
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.
SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO
Product Overview
Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.
Protective Value Added
We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.
Battle Hardened
Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Blazing The Trail of Innovation
Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates.
Shooters Cut Plate Weight (per plate):.
10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz.
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Side Plate Weight (per plate):
6×6 approximately 2lbs 9oz (base coat)
AR550 Body Armor - Shooters Cut Specs:
Made in U.S.A.
Special Threat Tested to Level III+ Standards
Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See a Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
Spartan AR550 Body Armor And Achilles Plate Carrier Package
from $375.38
$395.14
Spartan Armor Systems AR550 Level III+ Armor with Achilles Laser Cut Plate Carrier
Package includes:
Front and Back AR550 shooters cut steel armor plates.
Two 6x6 side plates.
Achilles Laser Cut Plate Carrier in your choice of Black, Coyote Brown, or OD Green.
You have the option to upgrade to the ATC™ Advanced Triple Curve and Full Coat for fragmentation mitigation.
Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.
Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?
Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.
Achilles Plate Carrier Specs:
1000 Denier Materials
Light weight and Duty 1000 Denier laser Cut Molle
Zippered Admin Pouch
Kangaroo pouch with removable triple M4 Pouches
Padded Shoulder Pads
Padded Front and rear with ventilation vents
Low Profile Drag Handle
Molle Velcro front and rear for Identifier Patches
2-inch replaceable quick release buckles
Accepts 10X12 and 11x14 Body Armor
6x6 or 6x8 Side Plates
Fits S to XL
Buy Body Armor - Level III+ Spartan AR550 Armor
We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor! With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!
Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming.
Advanced Triple Curve (ATC) AR550 Spartan Body Armor. An industry FIRST! Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Level III+ Side Plates: Choose from either 6″ x 6″ (small) or 6″ x 8″ (large)
Chest Plate Weight (per plate): 10x12 AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz.
Side Plate Weight (per plate): 6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6oz (base coat), 3lbs 12oz (full coat).
Thickness: .25″ AR550 plus approximately .25″ coating (full coat) makes this slim profile plate overall .5-.6″ in total thickness
As with all of our Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
See A Comparison of Our Full Line of Body Armor:
Shellback Tactical Rampage 2.0 Active Shooter Kit with Level III Single Curve 10 x 12 Hard Armor
from $754.99
$1,059.99
Kit Components
Shellback Tactical Rampage 2.0 Plate Carrier x 1
Shellback Tactical Model LON-III-P Plates x 2
Rampage 2.0 Plate Carrier Features
Constructed of durable 500 Denier Nylon
Front and rear plate pockets hold 10" x 12" shooter or SAPI cut ballistic plates
Laser cut Molle on front, rear and cummerbund to accessorize with pouches
Laser cut Molle loop panels on front and rear for ID placards
3D Spacer mesh padding on front, rear and shoulder pads for comfort
Removable front Molle placard
Cummerbund includes six integrated pockets with bungee retention for magazines or radios
Cummerbund accepts 13.75" x 5.5" soft armor inserts
Rear drag handle
Heavy duty bar tacking at key stress points
Fully adjustable shoulder straps to fit most sizes
Fully adjustable cummerbund to fit most sizes
Lifetime Warranty
Imported
Shellback Prevail Series Model LON-III-P Level III Armor Plates
NIJ threat level III
NIJ 0101.06 Certified
Listed on NIJ Compliant Products List
10"W x 12"L x 1.1"W
Weight 3.5 LBS
Single Curve
ESAPI/SAPI cut
UHWMP construction - ultra high weight molecular polyethylene
Multihit rated
600 Denier water resistant cover
Positive Buoyancy
USA Made
10 Year Ballistic Warranty
Stopping power
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
Shellback Tactical Rampage 2.0 Lightweight Armor System with Level III LON-III-P Plates
The Shellback Tactical Rampage 2.0 Lightweight Armor System is a super lightweight armor solution with a total combined weight of 9.6 LBS. This kit combines our Rampage 2.0 plate carrier with level III model LON-III-P hard armor plates. The Shellback Tactical Rampage 2.0 Lightweight Armor System is the perfect kit for SWAT, SRT and tactical teams where mobility and function is paramount.
Kit Components
Shellback Tactical Rampage 2.0 Plate Carrier x 1
Shellback Tactical Model LON-III-P Plates x 2
Rampage 2.0 Plate Carrier Features
Constructed of durable 500 Denier Nylon
Front and rear plate pockets hold 10" x 12" shooter or SAPI cut ballistic plates
Laser cut Molle on front, rear and cummerbund to accessorize with pouches
Laser cut Molle loop panels on front and rear for ID placards
3D Spacer mesh padding on front, rear and shoulder pads for comfort
Removable front Molle placard
Cummerbund includes six integrated pockets with bungee retention for magazines or radios
Cummerbund accepts 13.75" x 5.5" soft armor inserts
Rear drag handle
Heavy duty bar tacking at key stress points
Fully adjustable shoulder straps to fit most sizes
Fully adjustable cummerbund to fit most sizes
Lifetime Warranty
Imported
Shellback Prevail Series Model LON-III-P Level III Armor Plates
NIJ threat level III
NIJ 0101.06 Certified
Listed on NIJ Compliant Products List
10"W x 12"L x 1.1"W
Weight 3.5 LBS
Single Curve
ESAPI/SAPI cut
UHWMP construction - ultra high weight molecular polyethylene
Multihit rated
600 Denier water resistant cover
Positive Buoyancy
USA Made
10 Year Ballistic Warranty
Stopping power
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
LEGAL
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Shellback Tactical Banshee Active Shooter Kit with Level III Single Curve 10 x 12 Hard Armor
from $834.99
$1,169.99
Kit Components
Shellback Tactical Banshee Rifle Plate Carrier® x 1
Shellback Tactical Model LON-III-P Plates x 2
Shellback Banshee Rifle Plate Carrier® Features
Constructed of durable 500 Denier Nylon
Removable cummerbund with interior and exterior PALS for side plate pocket attachment
Cummerbund accepts 13.75" x 5.5" soft armor inserts
Quick release secondary securing system
Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest
Fully adjustable and padded front, back and shoulder areas.
Two areas of loop on front and rear for id placards
Front pocket accepts kangaroo inserts
Heavy duty bar tacking at key stress points
Wire, antenna or hydration hose guides
Low profile design for mobility
Rear drag handle
Lifetime warranty
Shellback Prevail Series Model LON-III-P Level III Armor Plates
NIJ threat level III
NIJ 0101.06 Certified
Listed on NIJ Compliant Products List
10"W x 12"L x 1.1"W
Weight 3.5 LBS
Single Curve
ESAPI/SAPI cut
UHWMP construction - ultra high weight molecular polyethylene
Multihit rated
600 Denier water resistant cover
Positive Buoyancy
USA Made
10 Year Ballistic Warranty
Stopping power
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
Shellback Tactical Banshee Rifle Lightweight Armor System with Level III LON-III-P Plates
The Shellback Tactical Banshee Rifle Lightweight Armor System is your complete lightweight armor solution. This kit combines our most popular Banshee Rifle Plate Carrier with two Level III Model LON-III-P hard armor plates. The total weight for the entire kit (carrier plus two plates) is only 9.2 LBS. This lightweight armor system is the perfect kit for SWAT, SRT and tactical teams where mobility is essential.
Kit Components
Shellback Tactical Banshee Rifle Plate Carrier® x 1
Shellback Tactical Model LON-III-P Plates x 2
Shellback Banshee Rifle Plate Carrier® Features
Constructed of durable 500 Denier Nylon
Removable cummerbund with interior and exterior PALS for side plate pocket attachment
Cummerbund accepts 13.75" x 5.5" soft armor inserts
Quick release secondary securing system
Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest
Fully adjustable and padded front, back and shoulder areas.
Two areas of loop on front and rear for id placards
Front pocket accepts kangaroo inserts
Heavy duty bar tacking at key stress points
Wire, antenna or hydration hose guides
Low profile design for mobility
Rear drag handle
Lifetime warranty
Shellback Prevail Series Model LON-III-P Level III Armor Plates
NIJ threat level III
NIJ 0101.06 Certified
Listed on NIJ Compliant Products List
10"W x 12"L x 1.1"W
Weight 3.5 LBS
Single Curve
ESAPI/SAPI cut
UHWMP construction - ultra high weight molecular polyethylene
Multihit rated
600 Denier water resistant cover
Positive Buoyancy
USA Made
10 Year Ballistic Warranty
Stopping power
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
LEGAL
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Shellback Tactical Prevail Series Level III Single Curve 10 x 12 Hard Armor Plate - Model LON-III-P
$354.99
$459.99
Shellback Tactical Prevail Series 10 x 12 Inch Stand Alone Level III Hard Armor Plate Model LON-III-P
The Shellback Tactical Level III Hard Armor Plate Model LON-III-P provides level III threat protection weighing in at just 3.5lbs. This plate is constructed of ultra high weight molecular polyethylene (UHWMP) and comes with a 5 year ballistic warranty. This plate is NIJ 0101.06 certified and listed on the NIJ Compliant Products list. Stay quick, lightweight and protected and order your Shellback Tactical Level III Hard Armor Plate Model LON-III-P today.
SPECIFICATIONS
NIJ threat level III
NIJ 0101.06 Certified
Listed on NIJ Compliant Products List
10"W x 12"L x 1.1"W
Weight 3.5 LBS
Single Curve
ESAPI/SAPI cut
UHWMP construction - ultra high weight molecular polyethylene
Multihit rated
600 Denier water resistant cover
Positive Buoyancy
USA Made
10 Year Ballistic Warranty
ROUNDS DEFEATED
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
LEGAL
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.
Shellback Tactical Shield 2.0 Active Shooter Kit with Level IV 1155 Plates
from $424.99
$594.99
SHELLBACK TACTICAL SHIELD 2.0 ACTIVE SHOOTER KIT WITH LEVEL IV 1155 PLATES
Kit Components
Shellback Tactical Shield 2.0 Plate Carrier x 1
Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2
Shield 2.0 Plate Carrier Features
Constructed of durable 500 denier nylon
Holds 10" x 12" shooter or SAPI cut ballistic plates
Lightweight laser cut MOLLE platform to customize kit with MOLLE pouches
Low profile minimalist design for mobility
3D Spacer mesh shoulder pads for comfort
Fully adjustable shoulder straps to fit most sizes
Fully adjustable cummerbund to fit most sizes
Heavy duty par tacking at key stress points
Loop panels on front and rear for ID placards and morale patches
Rear drag handle
Lifetime Warranty
Imported
Level IV Model 1155 Plate Features
NIJ level IV threat protection
NIJ 0101.06 certified and listed on NIJ CPL list
Multi-Hit Rated
Single Curve
10" x 12" SAPI cut
Weight - 8.2lbs
Stand alone protection
600 denier Cordura nylon exterior cover
Constructed of ceramic face with composite backing
Made in the USA
10 Year warranty
Stopping Power
.357 SIG FMJ
9MM
.38
.40 S&W
.44
.45
.223 BALL
5.56X45 (XM 193)
7.62 X 39 BALL
7.62 x 51 M80 Nato
M855/SS109
7.62x54R API
7.62x63 M2AP
Legal
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.